לוח משרות דרושים הייטק חומרה, לחיפוש זה נמצאו 94 משרות

Requirements:
* B.Sc. in Electrical engineering
* At least 3-year experience in power electronics
* 3+years of experience in circuit design and HW board design
* Knowledge in Analog circuits and Op Amps behavior – Must.
* Proven experience working with lab equipment such as Spectrum, Scope, Electronic Loads act.
* Knowledge of DC2DC converter topologies such as Buck, Boost, Flyback and forward
* Experience in designing Flyback DC2DC converters – Advantage
* Knowledge in Orcad, Visio and Pspice – Advantage
* Feedback control loop knowledge – Advantage
* Knowledge in EMI requirements and design – Advantage
* Knowledge in magnetic design – Advantage
* 1+years of experience in circuit design and HW board design – Advantage
* Knowledge in power layout design – Advantage
* Passionate for power electronics.

Requirements:
Minimum Qualifications:
B.Sc. in Electrical Engineering from a leading academic institution.
4 years of experience as a board design engineer, with a strong background in executing complex hardware projects.
Experience in high-speed designs and multi-layer PCB design.
Hardware-oriented, with experience in lab work (measurements/characterization, lab equipment).
Hands-on experience in PCB bring-up and debugging.
Preferred Qualifications:
Demonstrated success in leading multi-disciplinary projects.
Strong project management abilities, self-driven, with excellent interpersonal skills.
System orientation with a multi-disciplinary approach and multitasking capabilities.

Requirements:
Experience in HW modeling using systemC, including all stages of backend flow: synthesis and power measurements. Experience with working in a team with various discipline. Having good communication skills. Hands on and self contained.

Requirements:
B.Sc. in Electrical Engineering or relevant education or equivalent experience
At least 5 years of hands-on experience in a hardware lab environment
Proven experience with lab equipment and board-level debugging
Ability to understand schematics and PCB layouts
Strong problem-solving skills and teamwork mindset
Good technical English for reading datasheets and writing reports
Ways to stand out from the crowd:
Experience working with high-speed interfaces (PCIe, Ethernet, SerDes)
Familiarity with thermal/mechanical test setups
Experience with test automation
Background using bug tracking or PLM tools.

Requirements:
Electrical and Electronics Engineer- preference for RF/ Communications specialization.
Experience in RF/Antennas/ Communications/ cellular- an advantage.  Willingness for intensive work, non-standard hours, and working under pressure.
Strong written and verbal communication skills in Hebrew.
High service awareness and excellent interpersonal skills.
Ability to work independently and as part of a team.
Broad vision, responsibility, curiosity, creative thinking, initiative, and resourcefulness.
Command experience and field unit service in the IDF- an advantage.
Experience in managing fast TTM (Time-to-market) projects- an advantage.

Requirements:
B.SC./ M.SC. in Electrical Engineering/Computer Engineering or equivalent work experience.
Knowledge in physical design flows and methodologies (PNR, STA, physical verification).
Deep understanding of all aspects of Physical construction and Integration.
Knowledge in Physical Design Verification methodology LVS/DRC.
Familiarity with physical design EDA tools (such as Synopsys, Cadence, etc.).
Great teammate.

Requirements:
What we need to see:

BSc, MS, or PhD in Electrical Engineering, Computer Science, Computer Engineering, or equivalent experience.

7+ years of relevant experience in firmware, platform architecture, embedded systems, or low-level systems software.

Deep understanding of RAS principles, fault modeling, error containment, recovery policies, diagnosability, and serviceability requirements.

Experience architecting firmware for complex hardware platforms such as SoCs, accelerators, DPUs, servers, networking devices, or embedded systems.

Strong knowledge of power management concepts, including power sequencing, reset architecture, thermal and power fault handling, power state transitions, and platform recovery flows.

Familiarity with boot firmware, UEFI/BIOS, BMC, embedded controllers, RTOS, embedded Linux, or platform management stacks.

Strong understanding of hardware/software interfaces, registers, interrupts, telemetry paths, debug infrastructure, and firmware-to-hardware contracts.

Programming and debugging fundamentals across languages such as C/C++, Python/Perl scripting, Verilog, assembly, or RISC-V assembly.

Ability to lead cross-functional architecture discussions and drive alignment across hardware, firmware, software, validation, product, and customer-facing teams.

Excellent communication skills, strong technical leadership, and a real passion for working collaboratively.


Ways to stand out from the crowd:

Experience with PCIe AER, CXL RAS, memory RAS, ECC/parity, accelerator RAS, networking RAS, high-availability systems, or large-scale data center platforms.

Knowledge of ACPI, SMBIOS, UEFI, PLDM, MCTP, Redfish, IPMI, or cloud telemetry systems.

Experience with power/thermal fault handling, dynamic power management, platform power sequencing, low-power states, or autonomous recovery mechanisms.

Background in silicon bring-up, platform validation, production diagnostics, or customer failure analysis.

Prior technical leadership experience as a firmware architect, principal engineer, platform lead, or domain owner.

Requirements:
Bachelor's degree in Industrial Engineering/ Mechanical/ Electrical Engineering, Manufacturing, Operations, Supply Chain Management and/ or other industry related field.
At least 2 years of experience in a similar role, preferably within an engineering, manufacturing/operations environment
Strong program management skills - familiar with project management methodologies and tools
Ability to interact effectively with people at all levels of NVIDIA
Good written and verbal communication skills in English
Personal skills: Team player, independent, responsible, capable of multi-tasking, ability to drive people and tasks, leadership qualities, quick learning

Requirements:
* Academic degree in Electrical Engineering – mandatory
* At least 4 years of experience in electronic board design – mandatory
* Managerial experience leading 2 or more employees – mandatory
* Experience in analog circuit design – mandatory

Requirements:
B.Sc. in Computer Science/ Computer Engineering / Electrical Engineering.
5+ years of relevant professional experience..
Proficient knowledge of C.
Strong programming skills in Python.
Excellent understanding of embedded SW and real-time programming.
Strong analytical, creative, debugging and problem-solving skills.
Detail-oriented and comfortable with multitasking in a dynamic environment with shifting priorities and changing requirements.
An excellent teammate with good social skills.
Ways to stand out from the crowd:
Knowledge of network protocols.
Agile experience.
Background in Linux internals.
Scripting abilities (Python, Bash).
Strong C++ and OOP hands-on experience.

Requirements:
BSc or higher degree in Electrical Engineering, Computer Science or Computer Engineering. Graduated with honors.
6+ years of experience as a system architect for large, high-end ASIC SoCs.
Experience with multidisciplinary HW/SW systems.
Team player with great communication skills.
Advantages:
Deep understanding of datacenter systems
Experience with architecture of processors, accelerators, high speed PCIe