לוח משרות דרושים מהנדס חשמל משרה מלאה, לחיפוש זה נמצאו 708 משרות

we are looking for a Senior Flight Control Engineer.
What you'll own:
Design, implement, and tune the vehicle's core control laws in MATLAB/Simulink, with acoustic-source models embedded directly in the design loop.
Develop control strategies that treat radiated noise as a hard constraint alongside stability margins and handling qualities, through every phase of flight.
Build and maintain the nonlinear 6-DOF simulation environment used for control design, Monte Carlo robustness analysis, and pre-flight rehearsal of every test point.
Define attitude, rate, and trajectory constraints for noise-critical flight phases - departure, approach, and low-altitude operations over populated areas - jointly with the Acoustics team.
Autocode flight-critical control software to the real-time flight computer and verify it through processor-in-the-loop and hardware-in-the-loop campaigns.
Plan and execute flight test campaigns: write test cards, monitor telemetry in real time, and lead post-flight reconciliation of data against model predictions.
Run system identification programs that anchor aerodynamic, actuator, and noise-source models in flight data, feeding corrections back into the next control law release.
Lead control law design reviews with documented stability margins, robustness analyses, and failure-mode behavior, building the evidence base certification authorities will eventually audit.

We are seeking a Battery Testing Engineer to plan, execute, and analyze battery tests at the cell, module, and pack levels. This role is highly hands-on and data-driven, focusing on performance validation, safety testing, and reliability of battery systems throughout development and production phases.

Key Responsibilities
Develop and execute test plans for battery cells, modules, and packs, including performance, lifecycle, safety, and environmental testing.
Support prototype builds and validation testing.
Operate battery test equipment such as cyclers, thermal chambers, power supplies, load banks, and DAQ systems.
Analyze test data to evaluate capacity, efficiency, degradation, thermal behavior, and failure modes.
Define test procedures, acceptance criteria, and reporting formats in alignment with product requirements and standards.
Support abuse, stress, and safety testing (thermal, electrical, mechanical) in controlled lab environments.
Investigate test anomalies and failures, perform root-cause analysis, and support corrective actions.
Collaborate with mechanical, electrical, and thermal engineers to correlate test results with design assumptions.
Maintain test documentation, lab records, and calibration status of equipment.

we are looking for a Electric Propulsion Engineer.
What you'll own:
Design and analyze motor electromagnetics with torque ripple, cogging torque, and radial force harmonics treated as hard requirements alongside efficiency and power density.
Develop inverter modulation and current-control strategies - including harmonic injection and active ripple compensation - that suppress electromagnetic excitation before it becomes radiated tone.
Build and validate multiphysics models chaining electromagnetic force prediction through structural transfer paths to radiated noise, correlated against dyno and vehicle data.
Plan and execute dyno test campaigns with synchronized electrical, vibration, and acoustic instrumentation, owning the data pipeline from raw capture to engineering verdict.
Integrate motors, inverters, and mounts into the vehicle's novel lift and propulsion architecture, working structure-borne transmission paths jointly with the Structures and Acoustics teams.
Characterize thermal behavior on the dyno and derive continuous and peak torque envelopes that hold across the full flight profile.
Define acceptance and qualification test procedures for propulsion units, including back-EMF, efficiency-map, vibration, and acoustic signature checks.
Lead propulsion design reviews and hardware failure investigations, driving root cause to closure with documented corrective actions.

we are looking for a Computer Vision & Autonomy Engineer.
What you'll own
Design and own multi-sensor fusion pipelines - camera, radar, GNSS/INS, and altimetry - delivering robust, high-rate state estimation through GNSS-degraded urban environments.
Build the landing-site perception system: real-time detection, geometric assessment, and obstruction monitoring of vertiports and contingency sites during steep, noise-optimal approaches.
Train, quantize, and deploy neural perception models on embedded flight compute, owning latency, memory, and power budgets down to the millisecond.
Develop perception for detect-and-avoid: tracking non-cooperative traffic - small UAS, birds, general aviation - at ranges that preserve quiet, gentle avoidance maneuvers.
Stand up the data engine: flight-test data collection, ground-truth generation, dataset curation, and automated regression of model performance across releases.
Validate the perception stack in high-fidelity simulation, sensor replay, and hardware-in-the-loop benches before any algorithm touches the vehicle.
Architect run-time monitoring and assurance around learned components, producing the evidence structure a certification authority can eventually accept.
Support flight test campaigns end to end: integrate and calibrate sensors, analyze logs, and turn every anomaly into a fix or a documented limit within days.

Required rt SW Developer

We are seeking an experienced HW Team Leader to drive the engineering efforts behind our electronic systems. This role will focus on enhancing the testability, production efficiency, and quality of our products by defining Design for Testability (DFT) strategies, developing production test solutions, and leading failures investigation and correction.
What You'll Do:
Lead and mentor a team of highly skilled hardware engineers.
Drive execution in a fast-paced, multi-project environment.
Own and evolve our Design for Testability (DFT) strategy and guidelines.
Lead end-to-end development of production test solutions and test facilities.
Drive root-cause investigations, failure analysis, and product improvement initiatives.
Collaborate closely with R&D, manufacturing, and quality teams to ensure product reliability and production readiness.

Join our cutting-edge hardware development team as Micro-Architect and play a key role in defining and implementing the micro-architecture of advanced digital logic components.
What You'll Do:
Define and develop micro-architecture for complex logic blocks - from concept through high-quality RTL implementation
Collaborate closely with architecture, verification, design and software design teams
Write clear and detailed design specifications and drive architectural trade-off analysis
Optimize for performance and area
Contribute to innovation, methodology improvements, and technical leadership within the team

We are looking for talented engineers to help us develop a semiconductor platform based on revolutionary architecture.
Take part in the development of cutting-edge products within a disruptive system architecture. Youll have the opportunity to work on the technologies that power the worlds largest cloud provider, within a dynamic, open, fast-paced environment. Our Web Services provides a highly reliable, scalable, low-cost infrastructure platform in the cloud, which powers hundreds of thousands of businesses in 190 countries around the world.
We are looking for excellent electrical engineering graduates to join our talented Physical Design team, which develops our next generation products for the cloud market.
We will be conducting a unique training program for three months, where where you will be studying the following with our technical experts and team leaders:
* Backend development flow and stages (RTL to GDS).
* A wide variety of relevant tools and knowledge.
* Practical experience with the most advanced technologies in the industry.

Key job responsibilities
Join our three-month training program where you'll work alongside technical experts and team leaders to gain:
*Backend development expertise (RTL to GDS flow).
*Hands-on experience with industry-leading tools and technologies.
*Practical skills in AI-driven innovations and cutting-edge methodologies.
You'll collaborate with cross-functional teams throughout the chip development cycle and become an essential part of our dynamic physical design team, playing a critical role in next-generation cloud computing solutions development.

We are looking for talented engineers to join the Pre-silicon Verification team and help us technically lead the challenges of the next decade, developing a semiconductor platform based on revolutionary architecture, and taking part in the development of cutting-edge products within a disruptive system architecture.
Youll have the opportunity to work on the technologies that power the worlds largest cloud provider, in a dynamic, open, and fast-paced environment.

As a DFT Engineer at Annapurna Labs (AWS), you'll take ownership of testability architectures and DFT logic, driving their development and verification through the full hardware lifecycle. Your responsibilities may include:
Define and implement DFT architectures for complex SoC designs.
Develop and integrate DFT logic including: MBIST (Memory Built-In Self-Test), JTAG/TAP, and boundary scan.
RTL coding and debug of DFT controllers and infrastructure using Verilog/SystemVerilog.
Drive gate-level simulations to validate DFT functionality and test patterns.
Develop and verify DFT logic using UVM-based testbenches, functional simulation, and coverage-driven verification.
Participate in design reviews, DFT sign-off processes, and tapeout preparation
Cross-functional collaboration with Design, Verification, Physical Design, and Production/Test teams.

As a Q&R Lab Engineer you will help to manage the qualification and testing of some of the most advanced ICs in the world, support the maintenance of the Lab equipment and help the Q&R Engineers ensure that the AWS cloud remain the most reliable cloud in the world.


Key job responsibilities
In this role you will have end-to-end responsibility for the Q&R labs, support Annapurna's Q&R Engineers to setup and conduct reliability tests, preform tests on leading world-class ICs using high-end equipment and support the operation and maintenance of the Q&R lab.

The Chip HAL team is looking for a talented Embedded Software Engineer, to join us in building the next generation of networking products. Youll have the opportunity to work on the technologies that power the worlds largest cloud provider, in a dynamic, open, fast-paced environment.

In this role you will be leading tasks involving peers from multiple disciplines, while enjoying every step of the journey.
You will have the opportunity to work on the heart of the network engine, at the worlds largest cloud provider, in a dynamic, open, fast-paced environment.