לוח משרות דרושים מהנדסים, לחיפוש זה נמצאו 3,889 משרות

We are seeking a senior ATE Software Engineer to design, build, and deploy our next-generation automated manufacturing test platform for advanced telecom, high-density switching, and optical networking hardware.
In this role, you will bridge the gap between R&D hardware/firmware teams and high-volume manufacturing lines. You will take ownership of ingesting, refactoring, and consolidating disparate R&D scripts, diagnostic tools, and legacy software into a single, scalable, production-grade test platform.
We expect you to leverage modern AI-assisted development tools and workflows to maximize engineering efficiency, accelerate delivery timelines, and build highly robust, self-healing test automation. You will deploy test stations across global Contract Manufacturers (EMS/ODM), actively stabilize production lines through bring-up and ramp-up, and drive continuous test maintenance and root-cause failure analysis (RCA).
Key Responsibilities
Test Platform Architecture & Software Development:
Design, develop, and productize robust, modular test software frameworks for board-level (PCBA) and system-level manufacturing testing across multiple product lines and manufacturing sites.
Codebase Unification & Refactoring:
Consolidate and standardize R&D diagnostic libraries, silicon validation scripts, and firmware tools developed across various environments (Python, C# / Visual Studio, VB, ATEasy, Linux) into a unified, maintainable test execution engine.
AI-Accelerated Development & Workflow Automation:
Actively integrate Generative AI tools and AI coding agents into your daily workflow to accelerate code conversion/refactoring, automate test case synthesis, generate edge-case validation scripts, and enhance overall codebase resilience.
Production Line Deployment & Stabilization:
Deploy test stations and fixtures to local and overseas EMS/CM production lines. Monitor, debug, and fine-tune test execution during NPI and ramp-up phases until yield, takt time, and test stability targets (CPK / First Pass Yield) are achieved.
Failure Investigation & Intelligent RCA:
Investigate complex system-level and component-level test failures. Utilize advanced log analysis, structured telemetry, and pattern recognition to drive root-cause investigations and implement preventive software/hardware fixes.
Ongoing Test Maintenance & Optimization:
Provide continuous operational Production line support and maintenance, bug fixes, software updates, and station cycle-time optimizations for active mass-production lines.
R&D Collaboration & Test Specification:
Collaborate closely with Hardware, Firmware, and Validation teams during early design phases to define test specifications, drive Design for Testability,
Documentation & Technical Reporting:
Author and maintain comprehensive testing documentation, Standard Operating Procedures (SOPs), test coverage matrices, and detailed failure analysis reports.
Manufacturing Systems Integration:
Integrate automated test sequences with CMs SFC/MES/QMS, serialized tracking, and central test log databases.
Log Analysis & Analytics Tool Development:
Design and build dedicated log parsing, data visualization, and diagnostic analytics tools to streamline complex hardware/software debugging, accelerate root-cause analysis (RCA), and drive continuous production line cycle-time and yield optimization.

We are seeking a highly skilled and experienced multidisciplinary engineer with a strong background in system design to join our team. In this role, you will contribute to our upcoming projects and play a key part in the rapid expansion of the Ethernet market.
As a such, you will be responsible for developing high-speed digital and analog circuit boards used in Ethernet products. Your duties will include designing board schematics, overseeing PCB layout, and conducting lab . Additionally, you will be responsible for evaluating new hardware solutions, providing technical leadership in troubleshooting and reviewing schematics, layouts, and design for manufacturability (DFM), as well as managing components selection.

We are looking for a DevOps IT Engineer to join our dynamic IT team. This role blends hands-on system administration with modern DevOps practices, focusing on building, automating, and operating scalable hybrid environments across on-prem and cloud platforms.
If you are passionate about automation, cloud infrastructure, and improving developer productivity while maintaining robust and secure enterprise systems - we want to hear from you!
Responsibilities:
Design, build, and operate scalable infrastructure across on-prem environments and cloud platforms (AWS & Azure).
Manage and evolve virtualization platforms such as VMware and KVM (Proxmox).
Implement and maintain cloud infrastructure using Infrastructure as Code (IaC) and DevOps best practices.
Own identity and access management solutions including Azure Entra ID (Azure AD), SSO, MFA, Conditional Access, and directory synchronization.
Manage enterprise endpoint solutions such as Microsoft Intune and MobileIron/IVANTI.
Automate infrastructure provisioning, configuration, monitoring, and operational workflows.
Build and maintain internal tools to improve developer experience and engineering productivity.
Ensure system reliability, performance, and cost optimization across cloud and on-prem environments.
Maintain high security standards, compliance, and operational best practices.
Collaborate closely with DevOps, R&D, Security, and IT teams to support development and production environments.
Develop and maintain clear technical documentation.

We are looking for a DevOps IT Engineer to join our dynamic IT team. This role blends hands-on system administration with modern DevOps practices, focusing on building, automating, and operating scalable hybrid environments across on-prem and cloud platforms.
If you are passionate about automation, cloud infrastructure, and improving developer productivity while maintaining robust and secure enterprise systems - we want to hear from you!
Responsibilities:
Design, build, and operate scalable infrastructure across on-prem environments and cloud platforms (AWS & Azure).
Manage and evolve virtualization platforms such as VMware and KVM (Proxmox).
Implement and maintain cloud infrastructure using Infrastructure as Code (IaC) and DevOps best practices.
Own identity and access management solutions including Azure Entra ID (Azure AD), SSO, MFA, Conditional Access, and directory synchronization.
Manage enterprise endpoint solutions such as Microsoft Intune and MobileIron/IVANTI.
Automate infrastructure provisioning, configuration, monitoring, and operational workflows.
Build and maintain internal tools to improve developer experience and engineering productivity.
Ensure system reliability, performance, and cost optimization across cloud and on-prem environments.
Maintain high security standards, compliance, and operational best practices.
Collaborate closely with DevOps, R&D, Security, and IT teams to support development and production environments.
Develop and maintain clear technical documentation.

We are seeking an experienced and multifaceted Mechanical NPI & Manufacturing Engineer to own mechanical systems engineering, manufacturing transfer, advanced packaging, and thermal/liquid cooling integration across our high-performance networking portfolio.
In this role, you will lead end-to-end mechanical execution from late-stage R&D through volume manufacturing at global EMS/ODM facilities. Your scope spans chassis-level systems up to full-rack scale integration, custom packaging/palletization design, and advanced data center liquid cooling architectures. You will serve as the technical authority for mechanical quality, supplier qualification, transit reliability, and production line optimization.
Key Responsibilities
NPI Transfer & Manufacturing Execution:
Lead seamless NPI-to-mass-production transfers, cataloging & verifying BOM completeness, 2D/3D drawing releases, and fabrication readiness for standalone switches and fully integrated rack systems.
Author, validate, and maintain detailed Mechanical Assembly & Process Instructions for global contract manufacturing lines.
Define together with R&D precision assembly parameters: torque specifications, fastening tooling, screw tightening sequences, and structural assembly guidelines.
Design, validate, and commission mechanical assembly jigs, alignment fixtures, and high efficiancy tooling to ensure repeatable line assembly.
Advanced Packaging, Palletization & Logistics Engineering:
Design and validate primary and secondary packaging solutions, including custom cushioning (EPE/EPP foam), corrugated structures, and chassis transit protection.
Define ESD shielding, Moisture Barrier Bags (MBB), and desiccant requirements for high-sensitivity optical and electronic assemblies.
Optimize palletization patterns, container cube utilization, stacking strength calculations, and pallet weight distribution for global freight.
Plan, execute, and certify transit/drop testing in accordance with international standards.
Manage day-to-day shipping deviations, packaging waivers, and disposition of in-transit damage.
Labeling & Regulatory Compliance Integration:
Design unit, carton, and pallet labels; select and qualify label substrates, adhesives, and print ribbons for environmental durability (abrasion, high temperature, humidity, UV resistance per UL standards).
Manage the physical integration and placement of global regulatory markings on chassis surfaces, rating plates, and packaging.
Thermal Management & Liquid Cooling Architecture:
Address mechanical-thermal integration challenges within high-power chassis and optical cages .
Oversee mechanical validation and assembly of Liquid Cooling systems for high-density compute/switching gear, including cold plates, manifolds, quick disconnects , hoses/piping routing, fluid loop integrity, and leak detection mechanisms.

We are looking for an NPI & System Product Engineer to drive the transition of advanced networking switches and data center infrastructure systems from late-stage R&D validation & NPI into scalable mass production.
In this role, you will lead the handoff from DVT completion into PVT entry, support the setup and deployment of new production lines at global Contract Manufacturers, and execute capacity ramp-up plans toward High-Volume Manufacturing. You will serve as the technical operational link between R&D design/NPI teams and factory lines, ensuring line balancing, fixture readiness, yield optimization, and hands-on root-cause failure analysis (RCA).
Key Responsibilities
Production Readiness:
Support the technical handoff from R&D DVT exit to Operations PVT readiness.
Track and verify closure of open DVT hardware issues, check BOM readiness, and validate manufacturing gating criteria before mass production.
Execute PVT build plans to ensure product design tolerances align with factory process capabilities.
New Production Line Setup & Deployment:
Participate in the setup, line balancing, and deployment of new manufacturing lines and assembly workcells for chassis and full-rack integrated systems at CM facilities.
Validate physical workstation setups, line assembly flows, operator guidelines, and improve processes.
Verify assembly fixtures, press-fit tooling, and automated test stations during new line deployment.
Create and maintain production test procedures.
Capacity Ramp-Up & Takt Time Optimization:
Monitor station takt times, identify line bottlenecks, and drive cycle-time reduction initiatives.
Support the duplication and operational verification of line fixtures, tooling, and test stations to meet capacity scaling targets.
Track production ramp-up from pilot runs through full-rate High-Volume Manufacturing.
System Product Engineering & Yield Optimization:
Monitor key manufacturing metrics across PCBA & box-build assembly lines: First Pass Yield (FPY), Line Fallout, and Scrap Rate.
Use Statistical Process Control (SPC) and factory telemetry logs to identify systemic yield detractors.
Assist in refining production test limits, calibration procedures, and screening guardbands during volume ramp.
Root Cause Analysis (RCA) & Debugging:
Perform hands-on failure triage on system-level dropouts, intermittent hardware faults, and line fallouts during PVT and ramp-up.
Use schematics, Cadence Allegro board layouts, scopes, JTAG, and diagnostic tools to isolate component vs. process defects.

We are seeking an exceptional software engineer with the imagination to challenge existing designs and the discipline to implement those ideas in production-quality systems.
This role requires a passion for software development, strong system design skills, and deep expertise in coding and debugging. The ideal candidate is also a natural mentor, capable of guiding and developing junior engineers.
This position is for a Principal Software Engineer with extensive experience in databases and systems algorithms for distributed data platforms (databases, replication, HA, data-traversal, deduplication), who can lead the design and implementation of large, complex initiatives end to end.

we are a leader in large-scale networking solutions for AI infrastructure and service providers. The company's disaggregated networking architecture transforms the economics of large-scale infrastructures while maximizing performance, utilization, and operational efficiency. Its high-performance AI fabric maximizes GPU utilization and accelerates deployments by optimizing the AI stack end-to-end, resulting in higher tokens-per-second and lower cost-per-token. our company's solutions power production networks for global tier-1 operators like AT&T and Comcast, and scale multi-vendor AI infrastructures at foundation model labs, NeoClouds, and enterprises.
our company's Cybersecurity business unit is building an AI-powered security platform for the world's largest service provider networks. The platform combines a cloud-native microservices backend with self-hosted LLM inference, delivered into customers' own Kubernetes environments - often air-gapped, with no data leaving their premises.
Responsibilities
Own the platform's Helm charts and make them portable across any Kubernetes distribution, including OpenShift (non-root, restricted SCCs, NetworkPolicies).
Operate the self-hosted operator stack: CloudNativePG, Strimzi, ECK, MinIO, Redis, and Temporal.
Run the Nx monorepo pipelines and drive the ArgoCD GitOps rollout.
Build zero-downtime releases using blue/green and canary deployments, expand/contract migrations, and automated rollback.
Manage autoscaling with KEDA/HPA, backup/restore for stateful services, and load-validation of stamp sizing tiers.
Provide on-call support for dev/staging environments and customer stamps.
Build and maintain observability using Grafana Alloy, OpenTelemetry, and Prometheus/Grafana - dashboards and alerts across services, Kafka, databases, and GPUs.
Improve developer experience through a shared dev cluster with local-debug traffic interception (Telepresence / mirrord), targeting sub-15-minute onboarding.

A unique opportunity to combine business acumen with technical knowledge in a global, customer-focused environment.
This role is part of our company Global Commercial Services team and has a direct impact on the company's business success. Working closely with Sales, Solutions Engineering, Product Management, and global partners, you will support the development of service proposals and pricing for IP, Optical, and Software Solutions, helping network operators deploy and optimize next-generation communications networks.
Key Responsibilities
Services Pricing & Proposal Support
Support the preparation of service proposals and pricing for customer opportunities.
Assist with cost and margin analysis for service offerings and provide recommendations to internal stakeholders.
Work closely with Sales, Solutions Engineering, Product Management, and Business Management teams to gather information required for proposals.
Support the development and maintenance of service price lists and quoting tools.
Help improve quoting processes to increase efficiency and reduce turnaround time.
Contribute to the development of new service offerings and commercial models.
Maintain accurate records of proposals and support reporting and analysis of pricing and business trends.
Assist with services approval processes and opportunity tracking within Salesforce.

we are seeking a highly motivated Power Integrity Engineer to join our Hardware Engineering team. In this role, you will be responsible for defining, analyzing, simulating, and validating power delivery networks (PDNs) for next-generation networking platforms supporting high-performance ASICs, advanced SerDes interfaces, optical modules, and AI-scale networking systems.
You will work closely with hardware architects, PCB designers, ASIC teams, signal integrity engineers, mechanical engineers, and manufacturing partners to ensure robust power delivery, optimal system performance, and successful product deployment.
Responsibilities
Lead Power Integrity (PI) activities throughout the hardware development lifecycle, from architecture through production.
Define and optimize board-level and package-level Power Delivery Networks (PDNs) for high-current networking ASICs and supporting devices.
Perform pre-layout and post-layout PI simulations using industry-standard tools.
Establish target impedance requirements and validate compliance across all power rails.
Analyze DC voltage drop, AC impedance, transient response, and power distribution performance.
Collaborate with PCB layout engineers to optimize stackups, plane structures, decoupling strategies, and power routing.
Work closely with Signal Integrity engineers to ensure SI/PI co-optimization of high-speed interfaces.
Develop power integrity design guidelines and best practices for next-generation networking products.
Support schematic reviews, layout reviews, and design sign-off activities.
Perform laboratory measurements and correlation using oscilloscopes, VNAs, power analyzers, current probes, and related equipment.
Investigate and resolve PI-related issues during board bring-up, validation, and production.
Collaborate with ASIC, FPGA, memory, optics, and power component vendors to optimize overall system performance.
Drive continuous improvement of PI methodologies, simulation flows, and validation processes.

We're hiring a Quality Lead to own that. Why this role is different: you won't run a traditional QA team that tests features at the end. You'll own the quality gates inside the Machine and in production, author the monitoring skills our pods rely on, and hold independent authority to fail the Machine's output. Quality is our north star, and this role sets the bar.
THE MISSION: Make reliability, performance, and user experience a property of the system - not of individual heroics. Build and lead a Quality function (~9 people) that keeps an AI-native delivery org fast and trustworthy, and give the business confidence that what the Machine ships is safe to ship.
WHAT YOU'LL DO:
Own quality gates in the Machine - prose-driven tests (generated from requirements, not the code), adversarial / agent-checks-agent review, static analysis and code-quality remediation (e.g. SonarCloud), and CI gates that run before anything reaches a human.
Own quality in production - release verification, production testing, and ownership of change-fail and deployment-rework rates.
Author monitoring guidelines & reusable observability skills that delivery pods and the Machine consume - so monitoring is built in, not bolted on.
Own the evals that score the Machine's output for behavioral consistency and reliability - treating evaluation as a first-class engineering discipline.
Act as an independent governance voice - with the authority to block or fail output that doesn't meet the bar, partnering closely with Architecture.
Partner with the Core Platform team on the quality of customer-issue fixes and existing functionality.
Lead, coach and grow the team - quality/gate engineers, an agent-evaluation engineer, production-monitoring (SRE) and QA-infrastructure engineers.
Set the quality metrics and report them - DORA + deployment-rework rate, escaped-defect rate, review-queue depth, eval pass rates.

We are looking for an experienced Senior Signal Integrity Engineer to join our Hardware Engineering team. This role focuses on ensuring optimal signal integrity for high-speed interfaces, including Ethernet, PCIe, DDR5, and other next-generation technologies. As part of the team, you will be responsible for performing signal integrity analysis, developing signal integrity models, and ensuring electrical compliance for high-speed SERDES I/Os.
Responsibilities:
Conduct signal integrity analysis and simulations for high-speed interfaces such as 112Gbps Ethernet, PCIe Gen5, and DDR5 interfaces.
Develop and implement signal integrity guidelines for PCB design, ensuring high-performance and low-loss signal paths.
Analyze and resolve signal integrity issues related to high-speed interfaces, including reflection, crosstalk, and power delivery network (PDN) issues.
Collaborate with PCB layout engineers to optimize design for signal integrity, ensuring compliance with electrical standards and high-speed design best practices.
Perform time-domain and frequency-domain analysis, including loss, jitter, and eye-diagram analysis.
Utilize EDA tools such as Ansys SIWAVE, HFSS, or similar for simulation and validation of signal integrity designs.
Work closely with cross-functional teams to integrate signal integrity considerations into the overall hardware design process.
Develop behavioural models based on measured signal integrity data to inform future design and simulation work.
Conduct pre- and post-layout simulations and measurements for high-speed signal interfaces.