רובוט
היי א אי
stars

תגידו שלום לתפקיד הבא שלכם

לראשונה בישראל:
המלצות מבוססות AI שישפרו
את הסיכוי שלך למצוא עבודה

מהנדס חשמל

מסמך
מילות מפתח בקורות חיים
סימן שאלה
שאלות הכנה לראיון עבודה
עדכון משתמש
מבחני קבלה לתפקיד
שרת
שכר
משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP

חברות מובילות
כל החברות
כל המידע למציאת עבודה
להשיב נכון: "ספר לי על עצמך"
שימו בכיס וצאו לראיון: התשובה המושלמת לשאלה שמצ...
קרא עוד >
קריירה בקאמבק : איך לחזור ובגדול
עזבתם מקום עבודה? שיניתם כיוון מקצועי? לפעמים ש...
קרא עוד >
כיצד להתבלט בישיבות עבודה?
נצלו את הפאנל המקצועי ודחפו את עצמכם קדימה – הפ...
קרא עוד >
לימודים
עומדים לרשותכם
מיין לפי: מיין לפי:
הכי חדש
הכי מתאים
הכי קרוב
טוען
סגור
לפי איזה ישוב תרצה שנמיין את התוצאות?
Geo Location Icon

משרות בלוח החם
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 22 שעות
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
לתפקיד דינמי שכולל הדרכה טכנית מגוונת על מערכות בטחוניות בארץ ובעולם.

התפקיד כולל:
כתיבה והדרכה בדרג א' וב' של מערכות ללקוחות בארץ ובעולם.
העברת קורסים באנגלית, הכנת חומרי הדרכה טכניים והובלת תהליכי למידה מול לקוחות בינלאומיים.
- שילוב עבודה מרתק עם נסיעות לחו"ל והדרכות בינלאומיות!
דרישות:
השכלה: הנדסאי אלקטרוניקה (מהנדס - יתרון)
ניסיון בהדרכת מערכות טכנולוגיות.
הכרה של המערכות: אויוניקה, ל"א, תקשורת, בק"ש, בק"צ.
אנגלית ברמה גבוהה מאוד - חובה
יכולת לימוד עצמי, סקרנות וחריצות המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8891297
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 22 שעות
דרושים בהטכניון - מכון טכנולוגי לישראל
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
בפקולטה להנדסת חשמל ומחשבים פועל מערך מעבדות הוראה המשרת את פעילות ההוראה המעשית של הסטודנטים לתואר ראשון, בתחומים אקדמיים וטכנולוגיים מגוונים.
במסגרת מהלך פקולטי לחיזוק, פיתוח ושיפור ההוראה והניהול המערכתי של מעבדות ההוראה, הפקולטה מבקשת לאתר ראש/ת מטה להובלה ולניהול מערך מעבדות ההוראה. התפקיד מיועד לבעל/ת ראייה מערכתית ויוזמה, בעל/ת יכולת להוביל תהליכים ופרויקטים רב-תחומיים ולזהות כיוונים והזדמנויות לפיתוח המערך.

תיאור התפקיד:
הובלת מספר תהליכים ופרויקטים במקביל בסביבה רב-תחומית.
ביסוס, תכנון ופיתוח רבשנתי של מערך מעבדות ההוראה.
זיהוי, יזום וקידום של כיוונים חדשים לפיתוח מערך מעבדות ההוראה, בהתאם להתפתחויות אקדמיות וטכנולוגיות ולצרכים העתידיים של הפקולטה.
מיפוי צרכים, הגדרת יעדים, הובלת תהליכי שינוי והטמעתם, וכן קידום וייעול תהליכים אדמיניסטרטיביים במעבדות ההוראה.
תיעדוף תקציבים, תשתיות, ציוד וצורכי כוח אדם.
ניהול והפעלה של צוות המטה וכוח האדם ההנדסי במעבדות ההוראה, לרבות תכנון כוח אדם, חלוקת משימות, תיאום עומסים ופיתוח מקצועי.
איגום משאבים.
חיזוק הקשר בין פעילות המחקר לבין מעבדות ההוראה.
קידום שיתופי פעולה בין מעבדות, גורמים אקדמיים והתעשייה.
ריכוז ממשקי מעבדות ההוראה מול הנהלת הפקולטה והשירותים הפקולטיים.
ייצוג צורכי מעבדות ההוראה מול המחשוב הפקולטי ומעקב אחר המענה הניתן להן.
דרישות:
יכולת מוכחת להניע ולהוביל מספר פרויקטים ותהליכים במקביל, במגוון תחומי עניין מקצועיים.
תואר אקדמי בהנדסת חשמל ומחשבים או בתחום הנדסי/טכנולוגי רלוונטי.
ניסיון משמעותי בניהול או בהובלת פעילות הנדסית/טכנולוגית.
ניסיון בהובלת קבוצות עבודה, צוותי עניין ותהליכים ובניהול משאבים.
ראייה מערכתית, יכולת תכנון, הובלת שינוי והטמעתו.
יכולת גבוהה לרתימה, שיתוף פעולה ועבודה עם מגוון בעלי תפקידים.
יכולת התנהלות אפקטיבית מול מגוון דרגים וממשקים ארגוניים.
ניסיון בסביבה אקדמית ו/או בהוראה הנדסית, או אוריינטציה לתחומי ההוראה והאקדמיה - יתרון
היכרות עם פעילות מחקרית ועם מעבדות הוראה - יתרון
היכרות עם תשתיות ומערכות מחשוב מתקדמות - יתרון
יוזמה, חשיבה מערכתית, יכולות ביצוע, תקשורת בינאישית גבוהה, יכולת להוביל תהליכים ושינויים.

הערות:
המשרה הינה בהיקף 100%.
* המשרה מיועדת לנשים ולגברים כאחד.
המידע שיימסר על ידך ישמש את הטכניון – מכון טכנולוגי לישראל ו/או מי מטעמו, לצורך בחינת מועמדותך למשרה, לרבות מועמדות למשרות נוספות, וכן לצורך ניהול ותפעול הליכי הגיוס, ולמטרות נוספות בהתאם להודעת הפרטיות למועמדים למשרה בטכניון.
לא חלה עליך חובה חוקית למסור את המידע, אולם אם תבחר/י שלא למסור את המידע, כולו או חלקו, ייתכן שלא ניתן יהיה לבחון את מועמדותך או את התאמתך למשרה.
למידע נוסף, לרבות פירוט סוגי המידע הנאספים והשימושים הנעשים בו, זהות הגורמים שאליהם עשוי המידע להימסר, אופן מימוש זכויותיך לעיון ולתיקון מידע אישי, ודרכי יצירת קשר – ניתן לעיין בהודעת הפרטיות למועמדים למשרה, כפי שמפורסמת באתר הטכניון.

הטכניון פועל לגיוון תעסוקתי ומעודד הגשת מועמדויות מכלל המגזרים
التخنيون يعمل على تعددية التشغيل ويشجع التقديم للمناقصات من جميع الأوساط
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8895218
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 22 שעות
מיקום המשרה: קיסריה
סוג משרה: משרה מלאה
הובלה וליווי של פרויקטים מבוססי DCS, PLC ו-SCADA משלב התכנון ועד ההטמעה באתר הלקוח.
תכנון, תכנות והטמעת מערכות בקרה מתקדמות.
תמיכה הנדסית וליווי לקוחות לאורך כל שלבי הפרויקט.
ביצוע הדרכות והעברת ידע ללקוחות ולצוותים מקצועיים.
עבודה מול לקוחות, מתכננים, יועצים ויצרני ציוד.
השתלבות בפרויקטים חדשניים בעולמות האוטומציה, החשמל והאנרגיה.
דרישות:
מהנדס/ת חשמל / אלקטרוניקה / מכשור ובקרה - חובה
ניסיון בבקרי PLC ומערכת SCADA - חובה
ידע וניסיון בתכנון בשפות FBD, LD, ST - יתרון משמעותי.
ניסיון בפרוטוקולי תקשורת - יתרון
לפחות 3 שנות ניסיון בתחום מערכות בקרה - יתרון
אנגלית טכנית ברמה טובה
נכונות לנסיעות לאתרי לקוחות המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8757205
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 22 שעות
דרושים באלביט מערכות
Location: Haifa
Job Type: Full Time
We are looking for
For our Aerospace Division site in Haifa, we are looking for a Radar system Engineer with a background in signal processing to join the development of an innovative next-generation imaging radar system for airborne platforms
Join a multidisciplinary team developing advanced radar technologies and take part in shaping cutting-edge solutions with significant operational impact

In this role you will
Analyze and define system architecture, including writing specifications and requirement documents
Define and support engineering design activities in RF, algorithms, software, and hardware domains
Perform complex system integration activities
Define and execute laboratory, field, and flight experiments, including analysis of results
Define and support the development of advanced algorithmic capabilities
Work within a multidisciplinary engineering team
Requirements:
B.Sc. degree or higher in Physics, Electrical Engineering, Computer Engineering, or a related field
At least 3 years of experience in multidisciplinary system engineering
Experience in radar development or RF circuit development for radar systems
Experience in imaging radar development - Advantage
Hands-on experience in signal processing using MATLAB and Python - Advantage
High self-learning ability

*Only relevant applications will be answered
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8811722
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 22 שעות
סוג משרה: משרה מלאה
לחברת חשמל ובניה דרושים /ות עובדים /ות לעבודות בתחום החשמל באזור כרמיאל.
דרישות:
- נסיון קודם בתחום - חובה
- חשמלאי מוסמך- לא חובה (יתרון)
- העבודה באזור כרמיאל
- המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8857334
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 23 שעות
דרושים במטרה גיוס והשמה
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
מנהל /ת אחזקה לחברה תעשייתית יצרנית
אחריות כוללת לזמינות, אמינות ובטיחות מערכות הייצור והתשתיות, תוך קידום אחזקה מונעת,
שיפור מתמיד והתייעלות תפעולית.
ניהול ראשי צוותים, חשמלאים, מכונאים, אנשי בקרה, מתאם אחזקה, פלנר ועובדי קבלן.
שמירה על בטיחות העובדים והציוד, צמצום השבתות ועלויות, ופיתוח יכולות מקצועיות ותהליכיות במחלקת האחזקה.
מהווה גורם מקצועי מרכזי בממשק שבין ייצור, תפי, איכות, בטיחות, רכש, לוגיסטיקה, ספקים ויצרני ציוד בארץ ובחול.
משרה מלאה, זמינות לתקלות, השבתות מתוכננות ועבודות בשעות חריגות בהתאם לצורך.
דרישות:
מהנדס/ת מכונות או חשמל; ניתן לשקול הנדסאי/ת בעל/ת ניסיון משמעותי ורלוונטי.
ניסיון ניהולי מוכח במערך אחזקה בסביבה תעשייתית יצרנית.
יתרון משמעותי לניסיון בתעשיית הנייר, הקרטון הגלי, הדפוס או האריזות.
ניסיון בעבודה עם מערכות ניהול אחזקה ובניתוח נתוני אחזקה.
ידע במכניקה, חשמל תעשייתי, בקרה ואוטומציה, פנאומטיקה, הידראוליקה ומערכות הנעה.
היכרות עם קיטור, אוויר דחוס, ואקום ותשתיות מפעל.
יכולת קריאת שרטוטים, ספרות טכנית ומפרטי ציוד.
יכולת ניתוח נתונים, פתרון בעיות והובלת חקרי כשל.
עברית ברמה גבוהה ואנגלית טכנית טובה לעבודה מול יצרנים וספקים. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8857833
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
דרושים בהייר משאבי אנוש בע"מ
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
אחריות על כתיבה, הכנה מסמכים, ותחזוקה של מסמכים הנדסיים וטכניים.
עבודה שוטפת מול מחלקות שונות בחברה מהנדסים וצוותי פיתוח.
קריאה והבנה של שרטוטים טכניים והמרתם להוראות עבודה.
עבודה עם תקנים הנדסיים, הבנת הדרישות והתאמת תהליכי העבודה והייצור בהתאם.
אחריות על הכנת תיקי ייצור בהתאם לדרישות ההנדסיות והטכניות.
פיקוח הפקת פקודות עבודה והוראות ייצור לצורך העברתן לביצוע.
החברה מספקת תנאים כולל הסעות מחיפה, עכו קריות, נהריה, כרמיאל וסאגור.
דרישות:
- הנדסה מכונות /ה הנדסאי מכונות
- אחריות על פרוייקטים של לקוחות.
- ניהול תיק לקוחות מול המחלקות.
- עבודה מול מנהלי לקוח בארגון, בדיקת סרטוטים בקרה ותפעול.
- ניסיון בקריאת שרטוטים טכניים - חובה.
- ניסיון בעבודה עם מערכת פריורטי - יתרון.
- הבנה טכנית, גישה לתהליכים ולשיפור מתמיד.
- סדר וארגון ברמה גבוהה.
- אוריינטציה תפעולית וטכנולוגית.
- תנאים מעולים למתאימים. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8845272
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
סוג משרה: משרה מלאה
תכנון, פיתוח ושיפור מערכות חשמל ובקרה.
תחזוקה שוטפת ומתן מענה לתקלות במערכות הייצור.
הובלת פרויקטים בתחום החשמל והאוטומציה.
עבודה מול ספקים וקבלני משנה.
יישום נהלי בטיחות ועמידה בתקנים.


תואר בהנדסת חשמל - חובה.
רישיון מהנדס/ת חשמל - יתרון.
ניסיון בתעשייה יצרנית - יתרון משמעותי.
ידע במערכות בקרה, פיקוד ואוטומציה.
יכולת עבודה עצמאית ובצוות, אחריות ויוזמה.
היקף המשרה:
דרישות:
תואר בהנדסת חשמל - חובה.
ניסיון בתעשייה יצרנית - יתרון משמעותי.
ידע במערכות בקרה, פיקוד ואוטומציה.
יכולת עבודה עצמאית ובצוות, אחריות ויוזמה. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8744782
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
לחברה מובילה שמספקת שירותי בקרה דרוש/ה מהנדס/ת בקרה.
חברה יציבה עם תנאים מעולים, שכר גבוהה ורכב חברה.
תפקיד דינאמי המשלב עבודת משרד ועבודת שטח מול לקוחות.
*המשרה פונה לגברים ונשים כאחד
דרישות:
מהנדס/ת חשמל/מכונות
ניסיון בתחום הבקרה התעשייתית
ניסיון בכתיבת תוכנה לבקרי PLC ומערכות HMI המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8625440
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
דרושים באלביט מערכות
Location: Haifa
Job Type: Full Time
We are looking for
Elbit Systems is looking for a Senior Board Design Engineer for our Haifa site within the Aerospace Division. Join a leading global technology company developing advanced mission-critical systems and cutting-edge solutions across a wide range of defense applications. As part of our multidisciplinary engineering teams, you will take part in the development of advanced hardware platforms while working with cutting-edge technologies and complex engineering challenges
Requirements:
Bachelor's degree in electrical engineering
At least 3 years of experience in digital electronic board design
Experience with requirements capture and top-level architecture
Understanding of PCB layout methodologies and high-speed PCB design concepts
Experience working with signal integrity simulation tools such as Hyperlynx, Ansys, or similar tools
Experience with PCB design tools such as Altium Designer, Mentor Expedition, or Cadence
Experience in Voltage Regulated Modules DC/DC (VRM) design - Advantage
Background in retimers and redrivers - Advantage
Experience in Analog Circuit Design (amplifiers, filters, etc.) - Advantage
Problem-solving skills, teamwork abilities, and effective communication skills

*Only relevant applications will be answered
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8773161
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
דרושים באו.אר.אס- סניף חדרה
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
יכולת ניהול והובלת צוותים בשטח
ניסיון בעבודה מול קבלנים, ספקים וגורמים מקצועיים
אחריות, סדר ויכולת עבודה תחת לחץ וריבוי משימות
ניסיון מוכח בניהול פרויקטים בתחום החשמל;
דרישות:
שכר גבוה + רכב
תנאים מעולים
המשרה לכלל המגדרים המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8899234
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
דרושים בקורן טק טכנולוגיות
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
הזדמנות להצטרף לתפקיד טכנולוגי משמעותי בתעשייה הביטחונית, במחלקת אלקטרו-אופטיקה, ולהיות חלק מפיתוח תהליכי בדיקה ואוטומציה למערכות מתקדמות בתחום עיבוד התמונה.

במסגרת התפקיד:
פיתוח אוטומציה ותוכנות סימולציה לטובת בדיקה של אלגוריתמים לעיבוד תמונה, כתיבת קוד ב - Python או C ++, בניית תרחישי סימולציה מערכתיים, שילוב וכתיבת סקריפטים לאוטומציה בסביבות Jenkins ו-GitLab, ניתוח והבנה מערכתית של שילוב האלגוריתמים במערכת, וכן כתיבת מסמכי פיתוח תוכנה בצורה פורמלית ומסודרת.
דרישות:
תואר ראשון בהנדסת תוכנה / מדעי המחשב / הנדסת חשמל ואלקטרוניקה
ניסיון בפיתוח אוטומציה או תוכנה ב- Python או C ++
ניסיון בבדיקות תוכנה / בדיקות מערכת / הנדסת בדיקות
ניסיון בכתיבה והרצה של תרחישי בדיקה, סימולציות או בדיקות מערכתיות
יכולת הבנה מערכתית וירידה לפרטים
ניסיון בעבודה עם Jenkins / GitLab - יתרון
רקע בעולמות עיבוד תמונה / אלגוריתמים / אלקטרו-אופטיקה - יתרון משמעותי המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8729624
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
מיקום המשרה: מספר מקומות
תנאים נוספים: מספר סוגים
BIM MANAGER לחברת הנדסה ופרויקטים בין לאומית משרה 9932
אחריות על ניהול תחום BIM בחברה.
תיאום פרויקטים מולטידיסצפלינאריים, תיאום תכנון בין קבלני משנה, הדרכת עובדים ועוד.
משרה מלאה ימים א'-ה' שעות גמישות + אפשרות למשרה היברידית
תנאי שכר מעולים + רכב ותנאים נלווים.
דרישות:
השכלה של אדריכל /ית או מהנדס /ת אזרחי /ת / מהנדס מתחום אחר - רצוי
ניסיון בניהול BIM בפרויקטים מולטידיצפלינאריים - יתרון.
ניסיון בניהול BIM בפרויקטי בנייה - חובה.
אנגלית ברמה גבוהה - חובה.
שליטה בתוכנת REVIT - חובה.
הבנה רחבה בתכנון הנדסי - רצוי. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8899006
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
1 ימים
דרושים באלביט מערכות
Location: Haifa
Job Type: Full Time
We are looking for
Elbit Systems is looking for a Lead system Engineer to join the Haifa site.
Main Responsibilities
Lead the development of hardware based products such as computers and sensors from the requirements stage through production and delivery to the customer
Write product requirement and specification documents and analyze product performance
Manage all stages of development within a multidisciplinary team (hardware, logic design, mechanics, software, and more)
Conduct internal and external development reviews
Lead the development of electro optical, mechanical, and electrical TEST equipment
Oversee integration and design validation processes
Transfer products to production
Provide product integration support at customer sites
Prepare project work plans and budgets
Requirements:
B.Sc. in Electrical and Electronics Engineering
Previous experience in systems engineering / product management / technical management
At least 5 years of experience in board design - Mandatory
Experience in logical design, FPGA, or product management - Advantage
Experience leading projects combining hardware, firmware, electro optics, and software - Advantage
Experience writing requirements and specification documents for boards and assemblies - Advantage
Experience leading matrix, multidisciplinary teams - Advantage
system level vision, responsibility, organization, and independent learning ability - Advantage

*Only relevant applications will be answered
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8759166
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
1 ימים
דרושים בדשנים וחומרים כימיים - ICL GROUP
מיקום המשרה: קרית אתא וחיפה
סוג משרה: משרה מלאה
- ניהול ישיר של צוות החשמלאים, מכשירנים ואנשי בקרה- פיתוח, חניכה והכשרה
- הגדרת מדיניות, תקנים ונהלים טכניים בתחום החשמל, המכשור והבקרה במפעל
- אחריות על זמינות ותקינות ציוד המכשור, מערכות בקרה ותשתיות חשמל במתח גבוה ונמוך במפעל ובשטח הפארק
- ניהול משימות תחזוקת שבר בהתאם לסדרי עדיפות תפעוליים
- בנייה והובלת תכנית עבודה לאחזקה מונעת בתחום החשמל, המכשור והבקרה לרבות כיולים
- ניהול ופיקוח קבלנים בהתאם לתוכנית עבודה
- הובלת פרויקטים הנדסיים בתחום החשמל, מכשור והבקרה
- אחריות לעמידה בדרישות החוק והתקנים לבטיחות העובדים ולהטמעת טכנולוגיות חדשות לשיפור אמינות ויעילות
המערכות
- קביעת מדיניות רכש ותחזוקת מלאי בתחום החשמל והמכשור לרבות קטלוג ציוד, הגדרת רמות מלאי ומפרטי חלקי חילוף.
דרישות:
- מהנדס/ת חשמל בעל/ת רישיון חשמלאי מהנדס
- וותק של 3 שנים בתפקיד ניהולי
- ניסיון בתחום מתח נמוך ומתח גבוה- חובה
- היכרות עם מערכות בקרה וציוד מכשור מתקדם בתעשייה כימית/ תהליכית- יתרון
- ניסיון בניהול פרויקטים לרבות תכנון וניהול תקציבים- יתרון
- ניסיון במערכת SAP יתרון משמעותי
- יכולת תכנון וניהול תקציבים, איתור ופתרון בעיות המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8735416
סגור
שירות זה פתוח ללקוחות VIP בלבד
לוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Herzliya and Haifa
Job Type: Full Time
We are seeking an experienced Signal/Image Processing and Machine Learning engineer to join our team. The role focuses on developing innovative, real-time deep learning and signal processing solutions for new sensing and imaging systems, including video restoration. You will be part of an interdisciplinary team developing technologies that will shape future Apple products.
Description
Algorithm and model development:
- Design, implement, and optimize signal processing and machine learning models for sensing and imaging tasks, including video restoration.
- Develop and validate models using real sensor data, simulated data, and public datasets.
- Prepare, filter, process, and analyze large-scale datasets to train and evaluate models.
- Analyze your algorithm's results and benchmark them against leading methods, and theoretical bounds.
- Optimize models for real-time performance, low latency, and resource efficiency on-device.

Sensing and research:
- Develop algorithms that combine classical signal processing with learned models to extract robust information from sensor data.
- Investigate efficient architecture patterns (lightweight backbones, attention mechanisms, recurrent designs) suitable for real-time, on-device inference.
- Explore how algorithmic approaches can mitigate artifacts and limitations of new sensing and imaging systems.
- Stay current with recent advances in signal processing, computer vision, and machine learning.

Collaboration and technical leadership:
- Work closely with ML researchers, SW, HW, sensor, and architecture engineers to translate research ideas into robust models and practical, shipping systems.
- Provide technical guidance and mentorship to junior engineers, and help shape the team's technical direction.

Responsibilities
- Own the end-to-end development of real-time algorithms, from concept and prototyping through validation and deployment.
- Define evaluation methodology, metrics, and failure analysis processes for sensing and imaging algorithms.
- Drive trade-off decisions among accuracy, latency, power, and memory across algorithm, HW, and system constraints.
Requirements:
Minimum Qualifications
Strong foundation in signal processing, image processing, computer vision, machine learning, and deep learning.
Hands-on experience with sensing technologies (e.g., camera/image sensors, depth, radar, LiDAR, IMU, or other sensor modalities), including an understanding of sensor noise models and characteristics.
Demonstrated experience designing and deploying real-time deep learning and signal processing solutions using large-scale datasets.
Proficiency in Python and deep learning frameworks (e.g., PyTorch); experience with C++ or other performance-oriented languages is a plus.
Experience with model evaluation, debugging, experimental analysis, and failure analysis.
PhD or Master's degree in Electrical Engineering, Computer Science, or a related research field.
Proficient in written and verbal communication.
Ability to work both autonomously and collaboratively.
8+ years of relevant experience.

Preferred Qualifications
Experience deploying models on GPU, dedicated HW, or neural engines, including quantization, pruning, and other model compression techniques.
Experience with multi-sensor fusion, sensor calibration, or temporal/streaming signal processing.
Experience with generative priors (diffusion, flow matching) is an advantage.
Background in signal processing, physics, optics, lasers is a plus.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8877032
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Herzliya and Haifa
Job Type: Full Time
We are seeking an experienced Signal/Image Processing and Machine Learning engineer to join our team. The role focuses on developing innovative, real-time deep learning and signal processing solutions for new sensing and imaging systems, including video restoration. You will be part of an interdisciplinary team developing technologies that will shape future Apple products.
Description
Algorithm and model development:
- Design, implement, and optimize signal processing and machine learning models for sensing and imaging tasks, including video restoration.
- Develop and validate models using real sensor data, simulated data, and public datasets.
- Prepare, filter, process, and analyze large-scale datasets to train and evaluate models.
- Analyze your algorithm's results and benchmark them against leading methods, and theoretical bounds.
- Optimize models for real-time performance, low latency, and resource efficiency on-device.

Sensing and research:
- Develop algorithms that combine classical signal processing with learned models to extract robust information from sensor data.
- Investigate efficient architecture patterns (lightweight backbones, attention mechanisms, recurrent designs) suitable for real-time, on-device inference.
- Explore how algorithmic approaches can mitigate artifacts and limitations of new sensing and imaging systems.
- Stay current with recent advances in signal processing, computer vision, and machine learning.

Collaboration and technical leadership:
- Work closely with ML researchers, SW, HW, sensor, and architecture engineers to translate research ideas into robust models and practical, shipping systems.
- Provide technical guidance and mentorship to junior engineers, and help shape the team's technical direction.

Responsibilities
- Own the end-to-end development of real-time algorithms, from concept and prototyping through validation and deployment.
- Define evaluation methodology, metrics, and failure analysis processes for sensing and imaging algorithms.
- Drive trade-off decisions among accuracy, latency, power, and memory across algorithm, HW, and system constraints.
Requirements:
Minimum Qualifications
Strong foundation in signal processing, image processing, computer vision, machine learning, and deep learning.
Hands-on experience with sensing technologies (e.g., camera/image sensors, depth, radar, LiDAR, IMU, or other sensor modalities), including an understanding of sensor noise models and characteristics.
Demonstrated experience designing and deploying real-time deep learning and signal processing solutions using large-scale datasets.
Proficiency in Python and deep learning frameworks (e.g., PyTorch); experience with C++ or other performance-oriented languages is a plus.
Experience with model evaluation, debugging, experimental analysis, and failure analysis.
PhD or Master's degree in Electrical Engineering, Computer Science, or a related research field.
Proficient in written and verbal communication.
Ability to work both autonomously and collaboratively.
8+ years of relevant experience.

Preferred Qualifications
Experience deploying models on GPU, dedicated HW, or neural engines, including quantization, pruning, and other model compression techniques.
Experience with multi-sensor fusion, sensor calibration, or temporal/streaming signal processing.
Experience with generative priors (diffusion, flow matching) is an advantage.
Background in signal processing, physics, optics, lasers is a plus.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8877020
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
We are looking for a hands-on engineer to join our Platform Architecture post-silicon team. This team analyzes and tunes the performance and power of Apple Silicon for the Mac, and takes the learnings and measurements to drive SoC architecture change for future chips. If you work comfortably across the hardware/software stack, and the idea to bring up brand-new chips that just arrived from the fab does not scare you but gets you excited, when we would like to hear from you.

You will join a multidisciplinary team of architecture, silicon design, and system software engineers driving the performance and energy efficiency of Apple SoCs. The work spans application software, system software, SoC architecture, and microarchitecture, and sits at the intersection of measured silicon behavior and forward-looking architecture definition. You will build a deep understanding of how current and planned Apple products behave end to end, and use it to influence both hardware and software direction.

Responsibilities
Tune and define SoC memory and fabric performance state controllers on unreleased silicon, and propose improved control and observability mechanisms for future generations.
Plan and execute architecture studies that drive performance and energy-efficiency decisions for future SoCs.
Build tools, workflows, and automation for repeatable analysis of simulated and measured data, including terabyte-scale traces from prototype devices.
Architect hardware features that improve workload characterization and enable robust online control of power and performance.
Debug complex interactions between system software and SoC hardware.
Assess the feasibility of future use cases, SoCs, and products.
Communicate findings across chip design, architecture, software, and system teams to enable data-driven decisions.
Requirements:
Minimum Qualifications
BSc, MSc, or PhD in Computer Science, Computer Engineering, Electrical Engineering, or a related field.
3+ years of experience in SoC performance analysis, architecture, or post-silicon characterization.
Hands-on post-silicon performance analysis on real hardware, including device capture and trace-based analysis.
Working knowledge of SoC memory subsystems, caches, fabric, or power management.
Proficiency in C++, Python, and the Unix shell.
Ability to work on-site full time at Haifa, Israel. This role requires regular hands-on access to lab hardware and prototype devices and is not eligible for remote work.

Preferred Qualifications
Tuning memory performance state controllers, DVFS, or power management policies on pre-production silicon.
Depth in one or more of: cache policy, quality of service, clock and power gating, or sleep state control.
Debugging system software and SoC interactions across the full stack.
Familiarity with processor or SoC design and validation flows, and with industry-standard benchmarks.
Use of AI coding tools (e.g., Claude Code) for development and automation.
A track record of influencing architecture decisions through data-driven analysis.
Effectiveness in ambiguous, fast-paced environments, working both independently and in a small team.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8876993
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
This role is for a analog IP lead who will enable us to produce fully functional first silicon IP designs. The responsibilities include all phases of silicon development from definition to high quality production.


Specifying requirements and circuit architecture for analog blocks and sub-blocks of an IP, lab bring-up, characterization and debug, write specifications, test plans and characterization reports, work with chip design teams, system HW and SW design teams, ATE PE.

You will be responsible for:
Develop the circuit design of the IPs analog blocks following established design guidelines based on microarchitecture spec. Own all aspects of circuit design development.
Work and collaborate with other designers in the group to deliver results.
Work with FE & BE teams to ensure quality analog integration.
Work with power/performance and functional verification team to define and validate operation sequences.
Work with multi-disciplinary teams to make sure designs are delivered on time and with highest quality by incorporating proper checks at every stage of the design process.
Work with post silicon validation groups to ensure the design meets the power/performance targets.
Requirements:
Minimum Qualifications
5+ years experience in analog IC design.
Deep understanding of transistor device characteristics.
Deep understanding of power, performance and area trade-off in mixed-signal designs.
A proven track record of high-performance designs in high volume production for low power applications.
Knowledge of analog IC design flow and tools.
Strong communication skills are a must, as the candidate will interface with a lot of different groups within the company.
Excellent social and interpersonal skills.
Hands-on design expertise in one or more of the following areas: High Speed, Low Power I/O Circuit Design: familiarity with PHY principles and concepts including forwarded clock topologies, training and calibration schemes etc.); High Speed Clock Path: low jitter distribution, DCD correction, phase shift (through delay lines or phase interpolation); Analog Front End: low noise and high-resolution signal conditioning prior to ADC and Op-Amp, switched-cap and continuous time filters, reference/bias generation, LDO etc.; Data Conversion: ADC and DAC subsystem. Different styles of data converters (ΔΣ, SAR, pipelined, SAR and flash) and associated calibration techniques.
Strong initiative and ownership of responsibilities, productive.
Ability to work well in a team and be productive under tight schedules.
Experience with advanced FinFET CMOS processes - an advantage.

Preferred Qualifications
B.Sc. in Electrical Engineering.
MS.c\ PhD - advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8876825
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Caesarea
Job Type: Full Time
we bring connectivity and intelligence to everyday products and packaging; things previously disconnected from the internet of things. our platform combines cloud services and iot pixels, computing elements that can power themselves by harvesting radiofrequency energy. this revolutionary mixture of cloud and semiconductor technology is used by some of the worlds largest brands, food, and pharmaceutical companies to change how we make, distribute, sell, use, and recycle products. our investors include amazon, verizon, ntt docomo, qualcomm, pepsico, and softbank vision fund 2. join us and help pave the way for the new iot.
our TEST & product team is responsible for keeping a target of a very aggressive cost limit of the production testing (wafer sort) while performing comprehensive testing of all the units functionalities. this involves:
development of the tests using the teradyne uf tester.
development of unique and advanced TEST hw.
monitoring and analyses the production data.
fa (failure analysis) when issues are discovered.
innovative dft (design for testability) with the design team.
responsibilities:
development of wafer sort TEST programs through a close relationship with the system team.
development of the future products dft and dfm through close collaboration with the design team.
improvement of the production data analysis and reports through close relationships with the cloud and data teams.
working with the external abroad TEST houses.
decision-making based on massive data analysis (pass criteria, improvements of the tests, identification of failures).
integrate new and innovative testing methods for a new technology sector.
specify and work with external vendors for the tester hw (probe-card and load-board).
specify and work with external vendors for the htol hw, TEST program.
Requirements:
education: electrical engineer/physics
2-3 years of experience as a TEST engineer, more years of experience - advantage
experience in writing TEST programs for sort/ft (working on teradyne platform is an advantage)
familiar with lab equipment such as: scope, power supplies, power meters, etc
excellent written and verbal communication skills (hebrew and english)
knowledge in dft - design for TEST - advantage
data analysis of production results - advantage
statistical software knowledge - advantage
failure analysis experience - advantage.
RF knowledge - advantage
experience in hw design/definition - advantage
experience in a mass production environment - advantage
personal:
self-motivated and independent learner.
ability to see the overall picture
get stuff done mentality
quality driven
ability to work on long-term tasks
teamwork
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8876803
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Caesarea
Job Type: Full Time
the company was founded by the team that invented one of the technologies at the heart of 5g. their next vision was to develop an iot sticker, a computing element that can power itself by harvesting radio frequency energy, bringing connectivity and intelligence to everyday products and packaging, things previously disconnect from the iot. this revolutionary mixture of cloud and semiconductor technology is being used by some of the worlds largest consumer, retail, food and pharmaceutical companies to change the way we make, distribute, sell, use and recycle products.
our investors include softbank, amazon, alibaba, verizon, ntt docomo, qualcomm and pepsico.
we are looking for a talented and experienced engineer to take part in the verification efforts for the companys core product. this position involves building and maintaining a complex verification environment, and defining and executing a TEST plan. in this role, you will be leading all aspects of verification and will have a critical impact on the company's r&d path.
Requirements:
lead the full verification lifecycle and methodologies. plan, design and execute verification of sv/uvm block level and full chip environments, creating and execution TEST plans, tracking progress, and ensuring verification closure across diverse mix-signals SOC simulation using verilog, matlab, hw/sw co-simulation and lab integration.
work closely with digital design, analog design, software, back-end, sw and system teams to understand the functional, power and performance goals of the product and ensure its quality.
electrical engineering b.sc., computer engineering or other relevant engineering department graduate with high scores, or equivalent experience.
5+ years in design verification, with strong sv/uvm proficiency (less experienced engineers with high university grades or vast knowledge in rtl design will also be considered)
self-motivated and able to lead and drive tasks to completion.
great interpersonal skills.
understanding of digital asic design flows and SOC development methodologies. experience with SOC /full-chip verification, simulation/debug tools, Unix / Linux environments, scripting languages ( Python, etc.) and version control.
advantages
knowledge in low power verification and upf standard.
knowledge in mix signals socs.
experience with sw/hw co-development
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8876663
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Caesarea
Job Type: Full Time
the company was founded by the team that invented one of the technologies at the heart of 5g. their next vision was to develop an iot sticker, a computing element that can power itself by harvesting radio frequency energy, bringing connectivity and intelligence to everyday products and packaging, things previously disconnect from the iot. this revolutionary mixture of cloud and semiconductor technology is being used by some of the worlds largest consumer, retail, food and pharmaceutical companies to change the way we make, distribute, sell, use and recycle products.
our investors include softbank, amazon, alibaba, verizon, ntt docomo, qualcomm and pepsico.
we are looking for a talented and experienced engineer to take part in the verification efforts for the companys core product. this position involves building and maintaining a complex verification environment, and defining and executing a TEST plan. in this role, you will be leading all aspects of verification and will have a critical impact on the company's r&d path.
responsibilities:
define and implement robust sv/uvm verification solutions, including TEST benches and methodologies, to drive efficient verification closure across block-level and full-chip designs, integrating mix-signals SOC simulation environment using verilog, matlab, hw/sw co-simulation and lab integration.
work closely with digital design, analog design, software, back-end, sw and system teams to understand the functional, power and performance goals of the product and ensure its quality.
Requirements:
electrical engineering b.sc., computer engineering or other relevant engineering department graduate with high scores, or equivalent experience.
2+ years in design verification, with strong sv/uvm proficiency (less experienced engineers with high university grades or vast knowledge in rtl design will also be considered)
self-motivated, ability to work, lead and drive tasks to completion.
great interpersonal skills.
understanding of digital asic design flows and SOC development methodologies. experience with SOC /full-chip verification, simulation/debug tools, and Unix / Linux environments, scripting languages ( Python, etc.) and version control.
advantages
knowledge in low power techniques and upf standard.
knowledge in mix signals socs.
experience with sw/hw co-development
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8876626
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
29/10/2026
מיקום המשרה: אור עקיבא
סוג משרה: משרה מלאה
לחברתנו העוסקת בייבוא ושיווק מכונות CNC, רובוטיקה ופתרונות לתעשייה, דרוש/ה טכנאי/ת שירות מנוסה.

התפקיד כולל:
מתן שירות טכני, איתור ותיקון תקלות בבית הלקוח ובמעבדה.
התקנה והדרכה על מכונות חדשות.
תמיכה טכנית ללקוחות.
אינטגרציה ופיתוח של מערכות רובוטיות חדשניות.

אנחנו מציעים:
עבודה בסביבה טכנולוגית מתקדמת
הכשרה והסמכה
שכר גבוה
רכב

רקע טכני מוכח (חשמל/מכונות/אלקטרוניקה/מכטרוניקה) - חובה
ניסיון קודם בעבודה עם מכונות CNC או לייזר - יתרון
ידע או ניסיון ברובוטיקה, אוטומציה, בקרים או תכנות קובוטים - יתרון משמעותי
ידיים טובות, יכולת עבודה עצמאית ותודעת שירות גבוהה.
רישיון נהיגה - חובה.
נדרשת יכולת הדרכה טובה
אנגלית טכנית ברמה טובה
המשרה מיועדת לנשים ולגברים כאחד.
דרישות:
רקע טכני מוכח (חשמל/מכונות/אלקטרוניקה/מכטרוניקה) - חובה
ניסיון קודם בעבודה עם מכונות CNC או לייזר - יתרון
ידע או ניסיון ברובוטיקה, אוטומציה, בקרים או תכנות קובוטים - יתרון משמעותי
ידיים טובות, יכולת עבודה עצמאית ותודעת שירות גבוהה.
רישיון נהיגה - חובה.
נדרשת יכולת הדרכה טובה
אנגלית טכנית ברמה טובה
המשרה מיועדת לנשים ולגברים כאחד. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8874465
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
26/10/2026
Location: Haifa
Job Type: Full Time
We are looking for a HW Lead Engineer to help define, shape, and integrate cutting-edge solutions for the next generation of our cloud platforms.
As a Card Lead Engineer in the Nitro/K2 team you will be responsible for defining Annapurna Labs Network Interface Card (NIC) hardware for the Compute a storage servers type, owning the development and validation of Nitro cards, including readiness for mass production.
Youll provide leadership in new technologies of the HW interfaces, bringing them to large-scale deployment, in a continuous effort to deliver a world-class customer experience. This is a fast-paced, intellectually challenging position, and youll work with technical experts, senior leaders, and multiple areas of technology.


Key job responsibilities
- Own the design and sustain of the Nitro Smart Network Interface Card for CMRI vertical use cases.
- Work with joint design partners and manufacturing sites, to enable healthy mass production of the Nitro card.
- Review, identify, and qualify second-source electrical components, to enable continuity of supply.
- Analyze and debug design/manufacturing/integration issues.
- Continuously assess process capabilities and innovate to simplify processes, reduce costs, and shorten the time cycle of Nitro cards development and manufacturing.
- Collaborate with members of cross-functional teams, to gain knowledge and improve product design, processes, and quality.
- Work with customers, to optimize the entire value stream and put together joint processes that will lead to improved time cycle and lower costs.
- Willing to travel abroad one or two times a year, for a week at a time.
Requirements:
Basic Qualifications
- B.Sc. in Electrical Engineering or in related field.
- At least 8 years' experience leading hardware products from design to mass production: life cycle, components selection, schematics, layout, thermal, mechanical design, review, hardware-software interfaces, and production testing.
- At least 6 years experience in high-speed board design and practical hardware lab.
- Design/lab experience with at least at one of the following interfaces: DDR , PCIe , Practical experience with high-speed lab equipment.

Preferred Qualifications
- Experience with mass production products.
- Experience with Networking/Storage/Linux.
- Knowledge and understanding of HW PCB architecture and design.
- Experience with CPLD/FPGA coding and simulation.
- Technical leadership, Matrix work with multiple teams.
- Practical experience writing scripts.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8873528
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
26/10/2026
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
We are looking for talented engineers to join the Pre-silicon Verification team and help us technically lead the challenges of the next decade, developing a semiconductor platform based on revolutionary architecture, and taking part in the development of cutting-edge products within a disruptive system architecture.
Youll have the opportunity to work on the technologies that power the worlds largest cloud provider, in a dynamic, open, and fast-paced environment.
Requirements:
Basic Qualifications
- B.Sc. in Electrical or Computer Engineering. Please include your academic transcript with your CV in a single PDF.
- Understanding of object-oriented programming concepts.
- Knowledge of Verilog/SystemVerilog/Specman.

Preferred Qualifications
- Familiarity with hardware verification concepts and tools (UVM , Coverage Driven verification).
- Experience with at least one scripting language (Python, Perl, Bash, or Tcl).
- Knowledge of PCIe, Processors, Ethernet, DDR.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8873522
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
26/10/2026
Location: Haifa
Job Type: Full Time
We're looking for a System Engineer with Software or Hardware Engineering background to be part of defining, shaping and integrating solutions to next generation of our cloud platforms.

We are looking for an exceptional engineer to own the development, testing, and monitoring of the manufacturing health of our Graviton server products. You will be part of a team integrating new silicon, hardware, firmware, and software into a revolutionary system architecture.

Key job responsibilities
Lead triage, debugging, and root cause analysis of systems in AWS data centers.
Enhance troubleshooting capabilities and drive closure of in-fleet problems.
Analyze customer workflows and requirements to provide targeted resolutions.
Collaborate with Annapurna Labs monitoring team and root cause teams to improve product quality and reliability in fleet operations.
Represent the customer voice by providing fleet operation insights and requirements to Annapurna Labs' ASIC design, software development, QA, and architecture teams.
Develop and maintain training materials, quality documentation, and collateral to improve in-fleet operations.
Design and implement tools and scripts to support projects and customize solutions based on requirements.
Travel as needed, approximately 2-4 times per year.
Requirements:
Basic Qualifications
- Bachelor's degree in Electrical Engineering, Computer Engineering, Systems Engineering, or related fields.
- Knowledge of scripting languages (bash, python, etc.).
- 8+ years of experience as System Engineer; experience working with systems, including software, firmware, and hardware components.

Preferred Qualifications
- Computer architecture knowledge.
- High-speed interfaces knowledge and debug capabilities- PCIe, Ethernet, DDR etc.
- Experience with server (x86 / ARM) design or architecture.
- Experience with operating systems, networking, and remote debugging.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8873514
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
26/10/2026
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
As a System Verification Software Engineer, you will join a unique team that works at the heart of chip development, at the HW/SW boundary, collaborating across teams to ensure our semiconductor platforms meet the highest standards before they reach production, as we lead the market with our cutting-edge devices.
Youll be part of a team that verifies Graviton chips across emulation, silicon, and AWS production fleets-developing the tests, automation, and debug tooling that give us confidence our features function correctly on real hardware.

Key job responsibilities
* Verify and validate Graviton chips in emulation, silicon, and post-production.
* Develop tests that ensure our features function as intended.
* Build automation and debugging tools for silicon regressions and bring-up.
* Collaborate with hardware design and software teams to identify, analyze, and resolve design issues and verification gaps.
* Debug failures across diverse platforms (emulation and silicon).
Requirements:
Basic Qualifications
- B.Sc. in Electrical or Computer Engineering. Please include your academic transcript with your CV in a single PDF
- Experience developing software and/or hardware in a relevant field.

Preferred Qualifications
- Experience in system-level verification, design verification, or embedded software development.
- Knowledge of assembly languages and compilers.
- Familiarity with ARM architecture and/or its protocols (AXI/CHI).
- Independent, a fast learner, and a strong communicator.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8873491
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/10/2026
Location: Yokne'Am Illit
Job Type: Full Time
We are looking for a System Level Electrical Validation Engineer to join our Switch Group. In this role, you will be a key member of team that responsible for the validation of high bandwidth Ethernet switching ASICs.
job requisition id
2604877
What You Can Expect:
Execute and develop comprehensive functional testing of high-bandwidth Ethernet switching silicon systems to verify proper behavior, adherence to required specifications, and performance across all spec-defined conditions.
Drive the debug of complex switching silicon and system platforms with a strong emphasis on Layer-1 issues, including link-up flows, state-of-the-art SerDes, signal integrity, link stability, and analog front-end behavior.
Work closely with software developers, hardware design engineers, architects, and operations teams to investigate system-level issues and accelerate root-cause identification.
Stay current with modern automation tools, validation methodologies, and industry best practices, proactively identifying opportunities to enhance existing validation flows and efficiency.
Requirements:
Bachelor's/Master's degree in Electrical Engineering, Electro-Optics, or related fields.
10+ years of related professional experience.
Proficiency in programming languages such as Python, Java, or C#. Experience with automation and data analysis tools.
Strong understanding of high-speed SerDes and equalization techniques.
5+ years' experience with High-Speed I/O testing, debugging, and validation.
Problem-Solving: Strong analytical and problem-solving skills, with the ability to troubleshoot and resolve complex issues.
Attention to Detail: High attention to detail to ensure accuracy and reliability of automated systems.
Communication: Excellent communication skills, with the ability to work effectively with cross-functional teams.
Advantages:
Experience with Electro-Optic systems.
Deep understanding of L1/L2 Ethernet layers and standards.
Knowledge of Memory, PCIe, and Ethernet systems interfaces.
Hands-on test and validation experience of analog/digital and signal/power integrity using lab equipment such as high-speed oscilloscopes, BERT analyzers, TDR/VNA, etc.
Familiarity with board CAD tools, including Cadence and Allegro.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8863847
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Yokne'Am Illit
Job Type: Full Time
We are pioneering the future of medical diagnostics with our innovative capsule endoscopy solutions. Imagine a world where diagnosing gastrointestinal conditions is as simple as swallowing a pill which captures with imagers and different sensors the digestive system and transmit it in real time. Our cutting-edge technology not only makes this possible but also revolutionizes the patient experience, providing a non-invasive, accurate, and efficient diagnostic tool. We are seeking a dynamic and visionary Analog and RF engineer to join our dedicated team, driving the development and integration of our next-generation capsule endoscopy devices.
As a Senior Analog & RF Engineer specializing in capsule endoscopy development, you will play a key role in the design, development, and integration of the critical analog and RF communication path between the capsule, located inside the patients digestive system, and the external recorder worn by the patient.
You will be responsible for developing high-performance, low-power analog and RF solutions that enable reliable wireless communication, contributing directly to the performance and advancement of our next-generation medical devices.
In this critical role, you will collaborate closely with System Engineers, PCB design and Layout, Firmware Developers, Modem Algorithm Engineers, and Mechanical Design teams to develop and integrate advanced solutions across the system. You will work in a highly collaborative, open-minded environment that encourages new ideas, creativity, and innovation, contributing to cutting-edge medical technology that enhances patient care.
Primary responsibilities:
Own and drive the Analog & RF communication path from architecture definition through detailed design.
Work closely with leading semiconductor suppliers and technology partners on a system on Chip definition, development, and integration of custom IC/ASIC solutions, contributing to system architectural decisions and ensuring alignment with system-level requirements.
Research, evaluate, and define communication receiver and transmitter architectures, including Zero-IF, Low-IF/NZ-IF, Superheterodyne, and other relevant architectures, based on system requirements and product constraints.
Perform system-level RF and Analog analysis, including noise budget, link budget, dynamic range, sensitivity, linearity, distortion, interference, and overall communication-channel performance.
Develop simulation models and methodologies to evaluate communication-channel performance and validate architectural and design decisions prior to hardware implementation.
Design and specify the Analog transmitter and receiver signal paths, including filtering, amplification, gain stages, matching networks.
Analyse and optimize antenna design and RF performance, including antenna matching, efficiency, radiation characteristics, impedance, and interaction with the capsule and surrounding biological environment.
Drive a system on chip designs from proof-of-concept and laboratory prototypes into production-ready medical devices.
דרישות:
BSc \ MSc in Electrical Engineering.
7+ years of hands-on experience in very Low power Analog and RF engineering, preferably in wireless communication systems, RFICs, or mixed-signal systems; Familiarity with SoC/mixed-signal architecture, including considerations for integrating analog, RF, digital, and power-management functions.
Strong understanding of RF and analog communication architectures, including Zero-IF, Low-IF/NZ-IF, Superheterodyne, and related receiver/transmitter architectures; Proven experience with analog/RF transmitter and receiver design, including filters, amplifiers, LNAs, PAs, mixers, matching networks, and signal-conditioning circuits; Strong understanding of PCB-level RF implementation, including layout, grounding, shielding, power integrity, signal integrity, and RF isolation.
Preferred Qualifications:
Experience in writing design and technical specifications.#EN המשרה מיועדת לנשים ולגברים כאחד.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8862957
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
we are seeking a Lead Systems Engineer with a strong background in electronics and a solid understanding of electronic systems to drive Point-of-Care Ultrasound systems engineering activities across the full product lifecycle.
Job Description
Key Responsibilities:
Lead and manage system-level requirements and specifications throughout product development
Drive system verification and validation activities, including end-to-end system testing
Act as the primary interface between Algorithm, Software, and Verification & Validation (V&V) teams
Lead product risk management activities in accordance with regulatory and quality standards
Drive resolution of complex technical issues to ensure project milestones and goals are met
Collaborate closely with Program Management to support scheduling, mitigate technical risks, and inform decision-making through sound engineering judgment.
Requirements:
Bachelors degree in Electrical Engineering, Biomedical Engineering or a related engineering discipline
Minimum of 5 years of experience in medical device development and/or complex system development
Masters degree in Systems Engineering - an advantage
Desired Characteristics
Strong written and verbal communication skills
Proven ability to analyze complex problems and develop effective solutions
Ability to document, plan, and execute development programs
Demonstrated project management and cross-functional collaboration skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857582
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות שנמחקו