לוח משרות דרושים, לחיפוש זה נמצאו 34,135 משרות

We are looking for an NPI & System Product Engineer to drive the transition of advanced networking switches and data center infrastructure systems from late-stage R&D validation & NPI into scalable mass production.
In this role, you will lead the handoff from DVT completion into PVT entry, support the setup and deployment of new production lines at global Contract Manufacturers, and execute capacity ramp-up plans toward High-Volume Manufacturing. You will serve as the technical operational link between R&D design/NPI teams and factory lines, ensuring line balancing, fixture readiness, yield optimization, and hands-on root-cause failure analysis (RCA).
Key Responsibilities
Production Readiness:
Support the technical handoff from R&D DVT exit to Operations PVT readiness.
Track and verify closure of open DVT hardware issues, check BOM readiness, and validate manufacturing gating criteria before mass production.
Execute PVT build plans to ensure product design tolerances align with factory process capabilities.
New Production Line Setup & Deployment:
Participate in the setup, line balancing, and deployment of new manufacturing lines and assembly workcells for chassis and full-rack integrated systems at CM facilities.
Validate physical workstation setups, line assembly flows, operator guidelines, and improve processes.
Verify assembly fixtures, press-fit tooling, and automated test stations during new line deployment.
Create and maintain production test procedures.
Capacity Ramp-Up & Takt Time Optimization:
Monitor station takt times, identify line bottlenecks, and drive cycle-time reduction initiatives.
Support the duplication and operational verification of line fixtures, tooling, and test stations to meet capacity scaling targets.
Track production ramp-up from pilot runs through full-rate High-Volume Manufacturing.
System Product Engineering & Yield Optimization:
Monitor key manufacturing metrics across PCBA & box-build assembly lines: First Pass Yield (FPY), Line Fallout, and Scrap Rate.
Use Statistical Process Control (SPC) and factory telemetry logs to identify systemic yield detractors.
Assist in refining production test limits, calibration procedures, and screening guardbands during volume ramp.
Root Cause Analysis (RCA) & Debugging:
Perform hands-on failure triage on system-level dropouts, intermittent hardware faults, and line fallouts during PVT and ramp-up.
Use schematics, Cadence Allegro board layouts, scopes, JTAG, and diagnostic tools to isolate component vs. process defects.

we are a leader in large-scale networking solutions for AI infrastructure and service providers. The company's disaggregated networking architecture transforms the economics of large-scale infrastructures while maximizing performance, utilization, and operational efficiency. Its high-performance AI fabric maximizes GPU utilization and accelerates deployments by optimizing the AI stack end-to-end, resulting in higher tokens-per-second and lower cost-per-token. our company's solutions power production networks for global tier-1 operators like AT&T and Comcast, and scale multi-vendor AI infrastructures at foundation model labs, NeoClouds, and enterprises.
Responsibilities
Partner with Accounting, FP&A, Procurement, and other Finance stakeholders to understand business requirements and operational challenges
Analyze existing Finance processes, identify gaps and manual activities, and design scalable solutions
Translate Finance requirements into system configurations, workflows, controls, reports, and automation
Lead implementation projects from requirements definition and solution design through testing, UAT, deployment, and adoption
Ensure implemented solutions support accounting requirements, internal controls, data accuracy, and audit readiness
Document implemented processes, system logic, controls, and user procedures
Serve as Finance's hands-on NetSuite implementation expert - designing and implementing configurations, workflows, saved searches, reports, dashboards, roles, and approval processes
Improve the use of NetSuite across Finance and reduce reliance on spreadsheets and manual work
Support the implementation of new NetSuite modules and functionality, coordinating system changes and integrations with internal stakeholders and external implementation partners
Lead testing, UAT, issue resolution, and user training for Finance-related system changes
Identify practical opportunities to use AI and automation across Finance; evaluate, select, and implement AI-based tools that improve efficiency, accuracy, controls, and decision-making
Build or implement AI-enabled workflows for reconciliations, month-end close support, journal-entry review, variance/anomaly detection, forecasting, and management reporting
Develop AI assistants or agents that can securely analyze financial information, answer Finance-related questions, generate reports, and flag items requiring review
Establish validation, access, and control mechanisms for the use of AI in Finance, and continuously monitor and improve implemented solutions
Support Finance-related integrations between NetSuite and systems such as Salesforce, DealHub, Combitas, banking platforms, procurement tools, and reporting solutions
Define data flows, business rules, controls, and reconciliation requirements, working with internal IT teams and external vendors on technical integration activities
Develop Finance dashboards and self-service reporting where required.

We are looking for a Senior Network & Security Engineer to join our dynamic IT team.
Design, deploy, and operate enterprise and datacenter network infrastructure.
Manage and troubleshoot LAN, WAN, WLAN, VPN, and security environments.
Configure and maintain routers, switches, firewalls, load balancers, and related infrastructure.
Design and implement scalable network architectures based on modern cloud and hyperscale principles.
Drive network automation using Python, Golang, Shell, or similar technologies.
Build and enhance self-service infrastructure platforms supporting engineering and lab environments.
Monitor network performance, availability, and security using automated monitoring and alerting systems.
Collaborate closely with Infrastructure, Security, and Engineering teams to implement security controls and best practices.
Participate in architecture reviews, capacity planning, disaster recovery, and operational excellence initiatives.
Mentor team members and contribute to technical leadership across

we are seeking a highly motivated Power Integrity Engineer to join our Hardware Engineering team. In this role, you will be responsible for defining, analyzing, simulating, and validating power delivery networks (PDNs) for next-generation networking platforms supporting high-performance ASICs, advanced SerDes interfaces, optical modules, and AI-scale networking systems.
You will work closely with hardware architects, PCB designers, ASIC teams, signal integrity engineers, mechanical engineers, and manufacturing partners to ensure robust power delivery, optimal system performance, and successful product deployment.
Responsibilities
Lead Power Integrity (PI) activities throughout the hardware development lifecycle, from architecture through production.
Define and optimize board-level and package-level Power Delivery Networks (PDNs) for high-current networking ASICs and supporting devices.
Perform pre-layout and post-layout PI simulations using industry-standard tools.
Establish target impedance requirements and validate compliance across all power rails.
Analyze DC voltage drop, AC impedance, transient response, and power distribution performance.
Collaborate with PCB layout engineers to optimize stackups, plane structures, decoupling strategies, and power routing.
Work closely with Signal Integrity engineers to ensure SI/PI co-optimization of high-speed interfaces.
Develop power integrity design guidelines and best practices for next-generation networking products.
Support schematic reviews, layout reviews, and design sign-off activities.
Perform laboratory measurements and correlation using oscilloscopes, VNAs, power analyzers, current probes, and related equipment.
Investigate and resolve PI-related issues during board bring-up, validation, and production.
Collaborate with ASIC, FPGA, memory, optics, and power component vendors to optimize overall system performance.
Drive continuous improvement of PI methodologies, simulation flows, and validation processes.

we are seeking a Senior Product Manager focused on Switch platform hardware to be a key member of our Product Management team. Join a dynamic and forward-thinking company at the forefront of network transformation. We leverage advanced technologies to develop innovative solutions that drive efficiency, scalability, and exceptional network performance. Collaborate with the industrys best as we partner with hyperscalers, NeoClouds, and leading enterprises, shaping the future of disaggregated networking infrastructure. Our environment fosters creativity, teamwork, and growth, and offers you the opportunity to make a meaningful impact while working on groundbreaking hardware systems.
As a Senior Product Manager focused on Switch Hardware Platforms, you will drive the development, definition, and lifecycle management of high-end networking systems for AI fabrics. Your work will directly impact the performance, scalability, and reliability of next-generation network infrastructure, enabling customers to deploy and operate large-scale networks efficiently.
Responsibilities
Act as a hardware product expert specializing in high-end networking systems and system-level architecture, providing strategic direction across the product lifecycle.
Define and lead hardware product strategy, including system architecture, platform definition, and roadmap planning for next-generation switching and routing platforms.
Collaborate closely with engineering teams to develop product specifications, drive design trade-offs, and deliver high-quality hardware systems including PCB design, thermal solutions, power systems, and mechanical architecture.
Own end-to-end product lifecycle management from concept through development, validation, manufacturing, and deployment, ensuring timely delivery and high-quality execution.
Work with contract manufacturers, ODMs, and supply chain partners to ensure successful product manufacturing, certification, and deployment at scale.
Partner with marketing and sales teams to define product positioning, develop go-to-market strategies, and support customer engagements.
Engage with customers to gather requirements, validate solutions, and prioritize features that enhance product competitiveness and customer satisfaction.
Monitor product performance post-launch, analyze key metrics, and drive continuous improvements and future product iterations.
Prepare and present product plans, business cases, and status updates to stakeholders and executive leadership.

We are looking for an experienced Senior Signal Integrity Engineer to join our Hardware Engineering team. This role focuses on ensuring optimal signal integrity for high-speed interfaces, including Ethernet, PCIe, DDR5, and other next-generation technologies. As part of the team, you will be responsible for performing signal integrity analysis, developing signal integrity models, and ensuring electrical compliance for high-speed SERDES I/Os.
Responsibilities:
Conduct signal integrity analysis and simulations for high-speed interfaces such as 112Gbps Ethernet, PCIe Gen5, and DDR5 interfaces.
Develop and implement signal integrity guidelines for PCB design, ensuring high-performance and low-loss signal paths.
Analyze and resolve signal integrity issues related to high-speed interfaces, including reflection, crosstalk, and power delivery network (PDN) issues.
Collaborate with PCB layout engineers to optimize design for signal integrity, ensuring compliance with electrical standards and high-speed design best practices.
Perform time-domain and frequency-domain analysis, including loss, jitter, and eye-diagram analysis.
Utilize EDA tools such as Ansys SIWAVE, HFSS, or similar for simulation and validation of signal integrity designs.
Work closely with cross-functional teams to integrate signal integrity considerations into the overall hardware design process.
Develop behavioural models based on measured signal integrity data to inform future design and simulation work.
Conduct pre- and post-layout simulations and measurements for high-speed signal interfaces.

As a Solution Engineer, you will play a pivotal role in designing, deploying, and optimizing our companys Network Cloud AI Infrastructure solutions. This individual contributor role requires a blend of technical expertise, leadership, and hands-on experience to implement cutting-edge solutions for our customers. You will collaborate with sales engineering teams, customers, and cross-functional teams - including Product Management, Solution Architects, Engineering, and Marketing - to define technical requirements, articulate solution value, and ensure successful deployment on-site.
Key responsibilities include guiding customers through the design and deployment process, aligning technical solutions with business needs, and providing critical feedback to improve our companys product offerings. This position demands strong technical acumen, exceptional communication skills, and the ability to lead complex, high-impact projects in dynamic environments.
Responsibilities:
Design and plan rack layouts and network topologies to support customer requirements.
Perform Data Center upgrades and ensure smooth deployment of our company solutions.
Install and configure our company products, ensuring optimal performance and customer satisfaction.
Design and implement compelling Proof of Concept lab setups, run them, and collect and document the results for the field consumption
Develop and deliver HLD and LLD documentation for customer deployments.
Design and evaluate automation scripts for network operations, configuring server and switch fabrics.
Engage with sales teams and customers to ensure success with major opportunities and deployments
Introduce new products to the company sales and support teams and to company customers
Deliver technical trainings and TOIs for support/sales engineers, partners, and customers
Collaborate on product definition through customer requirement gathering and roadmap planning.