לוח משרות דרושים מהנדס חשמל

The HW System Architecture Team is a small team, whose goal is to support the development of next-generation systems for our companys self-driving car and advanced driver-assistance systems. We apply multiple disciplines to develop these solutions that serve our customers and our companys R&D
What will your job look like?
Wire Harness Engineer you will participate in the definition and implementation of our company's autonomous vehicle platform.
Design/Distribute of Hi-speed cables.
Design/Definitions of lab, farm and vehicle harnesses.
Ensure that the vehicle wire harnesses are connecting all the devices in a reliable and producible manner, in consideration of manufacturability and serviceability.
Design/Optimization of power distribution.
Creation/Maintenance of harness documentation.
Interface with suppliers and act as a technical point of contact.
Work with engineering to develop assembly and install instructions.
Ensure BOM accuracy, release drawings for manufacturing.
You will be as part of System Architecture team and should be comfortable with a high degree of ambiguity.

Which department will you join?
our company's VLSI team - a group designing the EyeQ chips for ADAS and autonomous cars.
The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Backend Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.

our company's Automated Driving group in Haifa is looking for an experienced DFT Engineer.
This is an exciting opportunity to join a team of highly talented engineers, working on one of the most cutting edge technologies - Autonomous Vehicle (AV) SoC.
At our company's Automated Driving group, we know that the idea of a fully autonomous car is no longer science fiction, but a reality that we are creating!
We have spent more than 15 years developing the world's most Advanced Driver Assistance Systems (ADAS) and we are now leading the computer vision and machine learning domain, reaching fully automated driving experience (AV).
What will your job look like:
You'll be responsible of architecture of the DFT solutions across the SOC (MBIST, SCAN ATPG, LBIST and more)
Develop all the necessary HW / FW / SW for the different modules
Verify and Validate our design
Debug and analyze coverage and yield loss
As a cutting edge technology company, we are working only with the very advanced DFT tools and features, while developing our own methods and DFT concepts as it required by the Automotive and Safety related products market (ISO26262).

The company's EyeC VLSI team designs cutting-edge chips for RADAR systems used in ADAS and autonomous vehicles and is looking for an experienced DFT Engineer.
This is a unique opportunity to join a team of top-tier engineers working with the most advanced technologies to develop Autonomous Vehicle (AV) SoCs. Every engineer in our team plays a broad and diverse role, taking on significant responsibilities, being involved in critical development stages, and making a direct impact on the success of our projects.
What will your job look like:
You'll be responsible for the architecture of DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary RTL for the different modules
Verify and Validate your design in GLS
Develop ATPG patterns to the highest requirements of Functional Safety (ISO26262).
Debug and analyze coverage and yield loss
Support production activities and Si debug.

our company's Automated Driving group in Haifa is looking for an experienced DFT Engineer.
This is an exciting opportunity to join a team of highly talented engineers, working on one of the most cutting edge technologies - Autonomous Vehicle (AV) SoC.
At our company's Automated Driving group, we know that the idea of a fully autonomous car is no longer science fiction, but a reality that we are creating!
We have spent more than 15 years developing the world's most Advanced Driver Assistance Systems (ADAS) and we are now leading the computer vision and machine learning domain, reaching fully automated driving experience (AV).
What will your job look like:
You'll be responsible of architecture of the DFT solutions across the SOC (MBIST, SCAN ATPG, LBIST and more)
Develop all the necessary HW / FW / SW for the different modules
Verify and Validate our design
Debug and analyze coverage and yield loss
As a cutting edge technology company, we are working only with the very advanced DFT tools and features, while developing our own methods and DFT concepts as it required by the Automotive and Safety related products market (ISO26262).

we are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.

The company's EyeC VLSI team designs cutting-edge chips for RADAR systems used in ADAS and autonomous vehicles and is looking for an experienced DFT Engineer.
This is a unique opportunity to join a team of top-tier engineers working with the most advanced technologies to develop Autonomous Vehicle (AV) SoCs. Every engineer in our team plays a broad and diverse role, taking on significant responsibilities, being involved in critical development stages, and making a direct impact on the success of our projects.
What will your job look like:
You'll be responsible for the architecture of DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary RTL for the different modules
Verify and Validate your design in GLS
Develop ATPG patterns to the highest requirements of Functional Safety (ISO26262).
Debug and analyze coverage and yield loss
Support production activities and Si debug.

we are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.

The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

our company's EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars.
Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Experienced Physical Design Engineer to join the growing Physical Design Team, responsible for developing our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.

The company's EyeC VLSI team designs chips for RADAR systems used in ADAS and autonomous vehicles. Our Physical Design team operates in a startup-like environment, emphasizing technical expertise, execution, and ownership. Each engineer in the Physical Design team takes full responsibility for their work, from initial definition through execution and final sign-offs. Engineers collaborate closely with design and architecture teams to develop constraints, conduct design reviews, and implement RTL modifications to ensure convergence.
We are seeking an Experienced Backend to join our growing Physical Design team. In this role, you will play a key part in the design of state-of-the-art SoCs, from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

our company EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars.
Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Experienced Physical Design Engineer to join the growing Physical Design Team, responsible for developing our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.

our company, a world leader in driver assistant systems and autonomous vehicles, is looking for talented silicon validation engineer for the range of its next generation SoCs supporting its radar systems.
Our team is responsible for validating our company's radar SoCs, utilizing Pre-Silicon environments, as well as Post-Silicon platforms.
We are developing fully embedded C++ based validation environment for our needs.
You will be taking part in developing anything from environment and drivers through system modules such as file system, network stack, memory management and more, and up to complex automation tools in both C++ and python.
What will your job look like:
Get a deep understanding of our chip hardware IP blocks, both analog and digital.
Develop our validation environment.
Develop, port, or add features to the product drivers using Technical Specs and existing modules.
Define, develop and execute various complex validation scenarios on the SoC.
Debug complex SoC problems using embedded GDB, JTAG probes, going down to signal level using scopes.
Take part in Next Gen SoC's Power-On's and platforms Bring-Up's.
Collaborate with other SW/Embedded and HW/Electrical Validation teams across the company.

our company, a world leader in driver assistant systems and autonomous vehicles, is looking for talented silicon validation engineer for the range of its next generation SoCs supporting its radar systems
Our team is responsible for validating our company's radar SoCs, utilizing Pre-Silicon environments, as well as Post-Silicon platforms.
We are developing fully embedded C++ based validation environment for our needs.
You will be taking part in developing anything from environment and drivers through system modules such as file system, network stack, memory management and more, and up to complex automation tools in both C++ and python.
What will your job look like
Get a deep understanding of our chip hardware IP blocks, both analog and digital.
Develop our validation environment.
Develop, port, or add features to the product drivers using Technical Specs and existing modules.
Define, develop and execute various complex validation scenarios on the SoC.
Debug complex SoC problems using embedded GDB, JTAG probes, going down to signal level using scopes.
Take part in Next Gen SoC's Power-On's and platforms Bring-Up's.
Collaborate with other SW/Embedded and HW/Electrical Validation teams across the company.