לוח משרות דרושים חשמל ואלקטרוניקה משרה מלאה, לחיפוש זה נמצאו 2,387 משרות

Were looking for an Experienced Physical Design Engineer to join our growing team, and take a key role in developing our next-generation SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

Were looking for an Experienced Physical Design Engineer to join our growing team, and take a key role in developing our next-generation SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner, leading the process from RTL to GDS .
Lead floorplan exploration in collaboration with Front-End and Architecture teams.
STA: Partner with FE and floor planners to manage block and top-level constraints and perform 1st-level timing analysis.
Synthesis: Conduct synthesis exploration and deliver final netlists, including scan insertion, UPF, and clean Lint/Spyglass checks.
Place & Route: Drive the flow from synthesis netlist to final layout and signoff verification, with a focus on optimizing PPA (Power, Performance, and Area).
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

The Automated Driving Hardware group in Haifa is looking for an Experienced Formal Verification Engineer to join a team of talented engineers developing next-generation silicon for autonomous driving platforms.
This is a unique opportunity to enter one of the most challenging and rewarding disciplines in hardware development. Formal Verification combines deep understanding of computer architecture, digital design, and advanced verification methodologies to prove hardware correctness and uncover bugs that traditional testing may never find.
What will your job look like:
Be the owner of formal verification environment from first draft to sign-off stage
Apply formal methods to verify the correctness of various complex digital systems
Work with HW architects\designers to define assumptions, rules and cover properties
Help define the formal verification methodology and environment to be applied by the team
Explore new Formal methods and Tools
Work with tools like Cadence JasperGold, Verisium manager, Xcelium, Indago
Analyze verification results, identify bugs, and collaborate with engineers to resolve design issues
Develop generic formal blocks\functions of commonly used logic, to be later used off the shelf.

Our Automated Driving group in Haifa is looking for an experienced DFT Engineer.
This is an exciting opportunity to join a team of highly talented engineers, working on one of the most cutting edge technologies - Autonomous Vehicle (AV) SoC.
We know that the idea of a fully autonomous car is no longer science fiction, but a reality that we are creating!
We have spent more than 15 years developing the world's most Advanced Driver Assistance Systems (ADAS) and we are now leading the computer vision and machine learning domain, reaching fully automated driving experience (AV).
What will your job look like:
Develop all the necessary HW / FW / SW for the different modules
Verify and Validate our design
Debug and analyze coverage and yield loss
As a cutting edge technology company, we are working only with the very advanced DFT tools and features, while developing our own methods and DFT concepts - as it required by the Automotive and Safety related products market (ISO26262).

Our Autonomous Driving group in Haifa is looking for an Electrical Validation & Embedded SW Engineer. This is an exciting opportunity to join a growing team of highly talented engineers, working on the worlds most advanced SoCs for ADAS and self-driving vehicles.
Electrical Validation engineers enable, debug, and validate high-speed interfaces - like LPDDR4/5/6, PCIe Gen4/5, CDPHY, and MPHY - using high-end Lab measurement equipment and advanced SW tools. This dynamic work environment requires interfacing with Silicon and hardware design engineers, Software developers, Signal Integrity, and System Validation teams. The proximity to Signal/Power integrity simulation activities - we are a single SIPI/EV team - is another powerful advantage, enabling joint simulation-measurement effort.
What will your job look like:
You will join a team of talented and experienced EV/SI/PI engineers with wide scope of responsibility, from Pre-Si SI/PI simulations to Post-Si Electrical validation and debug, covering all the high-speed analog interfaces of our EyeQ products.
Responsibilities include performing electrical spec compliance and system margin validation, interface optimization, statistical results analysis, validation flow definitions and automation, validation SW tools development, etc.
You will also deal with FW development, automation enabling, data post-processing and debug of high-speed interfaces, like LPDDR4/5, PCIe Gen4/5, and D/C/MPHY.

The Product Validation department is looking for a Validation Engineer.
Our department is responsible for delivering high-quality ADAS (Advanced Driver Assistance Systems) products.
We are the first line of support for our customers around the globe, and as our Validation Engineer, you will interact with most of our departments to achieve our goals.
What will your job look like:
Perform system-level validation of embedded systems, covering both hardware and software, with a strong focus on functional testing
Design and maintain test environments, including lab setups, test systems, and configurations.
Write and execute test plans and test cases based on system requirements, including manual and automated tests.
Validate communication protocols and system interfaces, and perform hardware bring-up and integration testing.
Install and support debug systems and sensors on development vehicles and assist automotive customers during integration.

Product Validation department is looking for an Validation Engineer . Our department is responsible for delivering high quality ADAS (Advanced Driver Assistance Systems) products. We are the first line of support for our customers around the globe and as our Validation Engineer you will be interacting with most of our departments, to achieve our goals.
What will your job look like:
Testing and evaluating system performance across both hardware and software components, identifying issues, analyzing root causes, and verifying system functionality.
Developing, executing, and improving validation tests and integration methodologies to ensure product quality, reliability, and compliance with system requirements.
Performing manual validation alongside built-in automated test suites, analyzing test results, documenting findings, and supporting issue resolution.
Installing, configuring, and validating our debug systems and sensors on development vehicles, while providing technical support and troubleshooting assistance to internal teams and automotive customers.

We are looking for a talented Process Electronics Engineer to join our Engineering team and lead the transition of innovative electronic products from development to production.

What youll do:
Lead New Product Introduction (NPI) and transfer products from R&D to manufacturing.
Develop, optimize, and improve manufacturing processes for electronic and electromechanical products.
Drive Design for Manufacturing (DFM), Design for Assembly (DFA), and Design for Testability (DFT) activities.
Investigate production issues, perform root cause analysis, and implement corrective actions.
Lead process validation, qualification, automation, tooling, and continuous improvement projects.
Collaborate closely with R&D, Production, Quality, Supply Chain, and Manufacturing teams.

Required Field Engineer in India (Chennai) - Relocation
Unique opportunity for relocation in India (Pune) as a Field Engineer!
We develop systems that change the way we drive, from preventing accidents (advanced driver assistance systems) to semi and fully autonomous vehicles. If you are an excellent, bright, hands-on person with a passion to make a difference - come and lead the revolution!
The field engineer is the connecting link between us and our customers, the car manufacturer (OEM) and the integration partner (Tier 1). As such, the field engineer provides the first line of technical support, analysis, and integration in the development of next-generation semi-autonomous driving systems.
What will you do?
The field engineer will relocate abroad and work alongside the development teams of a leading international automotive company. The field engineer will Be the liaison between us and the customer and hold a key role in our development projects providing the customer with direct technical support. As such, the field engineer will have an influence on the design and application of advanced vision based semi-autonomous driving systems, eventually installed in millions of cars worldwide.
What will your job look like:
Installing various systems on evaluation and development vehicles.
Performing and supervising test drives on an open road and test tracks.
Testing performance and quality of the vision system.
Supporting system integration efforts with deep "bits and bytes" understanding of the entire system.
Providing expert support and training for the engineering teams on site.
The position includes office work, support at vehicle production lines and integration facilities.
Tasks also include long test drives travel in india and additional countries.
Crisis management.
Ability to understand the entire system and solve the customer problems.
Working with high ranked managers from both T1 and OEM sides.
The position requires a training period of 2-3 months in Jerusalem.

The EyeC VLSI team designs cutting-edge chips for RADAR systems used in ADAS and autonomous vehicles and is looking for an experienced DFT Engineer.
This is a unique opportunity to join a team of top-tier engineers working with the most advanced technologies to develop Autonomous Vehicle (AV) SoCs. Every engineer in our team plays a broad and diverse role, taking on significant responsibilities, being involved in critical development stages, and making a direct impact on the success of our projects.
What will your job look like:
You'll be responsible for the architecture of DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more).
Develop all the necessary RTL for the different modules.
Verify and Validate your design in GLS.
Develop ATPG to the highest requirements of Functional Safety (ISO26262).
Debug and analyze coverage and yield loss.
Support production activities and Si debug.

Job Description and Responsibilities:
* Fault diagnosis in electronics-based products at the component level.
* Programming and testing electro-mechanical products.

Reports to:
Production Manager

Required Senior R&D System Application Engineer (12 Months Contract)
Innovation starts from the heart. We put patients first. We invest a significant proportion of our revenue towards research and development to drive and develop groundbreaking medical innovations for structural heart disease. As part of our R&D Engineering team, you will work closely with our Quality and Manufacturing teams to develop the latest tools and technologies to address significant, unmet clinical needs that impact patients lives around the world.
What will you do?
You will be part of an R&D team responsible for the development, integration, and validation of medical device systems. With a strong emphasis on hands-on development, data-driven engineering, with a problem-solving mindset. you will contribute to the full product development lifecycle - from the need, through signal processing and GUI development to system testing and clinical application. This role is designed for engineers who are passionate about building and refining medical device technologies in a multidisciplinary environment.
How youll make an impact:
Develop and improve medical device features within the portfolio as part of a multidisciplinary R&D team that includes mechanical, hardware, and software engineers. Main activities include - procedure development, algorithm development, GUI design and implementation, scripting, test automation, data acquisition, and data analysis and visualization.
Participate in the design and development of system-level features, supporting architecture decisions and translating clinical and functional requirements into working solutions.
Perform hands-on testing of medical device systems (implant systems, hardware, and software), including functional, integration, and exploratory testing to validate design performance and clinical readiness.
Lead test design efforts, including writing test cases, test procedures, and test reports. Collect, analyse, and summarize test data to support design decisions and issue investigations.
Execute and support test protocols in lab and simulated clinical environments. Accurately document results, observations, and issues to ensure traceability and compliance.
Collaborate with stakeholders and colleagues - including caregivers, R&D engineers, clinical specialists, marketing, and quality teams - to understand system behaviour, clinical workflows, and end-user needs, ensuring that developed solutions align with real-world application requirements.