לוח משרות דרושים מהנדס אלקטרוניקה

Required Experienced DFT Engineer
The EyeC VLSI team designs cutting-edge chips for RADAR systems used in ADAS and autonomous vehicles and is looking for an experienced DFT Engineer.
This is a unique opportunity to join a team of top-tier engineers working with the most advanced technologies to develop Autonomous Vehicle (AV) SoCs. Every engineer in our team plays a broad and diverse role, taking on significant responsibilities, being involved in critical development stages, and making a direct impact on the success of our projects.
What will your job look like:
You'll be responsible for the architecture of DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary RTL for the different modules
Verify and Validate your design in GLS
Develop ATPG patterns to the highest requirements of Functional Safety (ISO26262).
Debug and analyze coverage and yield loss
Support production activities and Si debug.

Were looking for a Backend Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.

We are looking for a System Validation Engineer Satellite Ground Station .
The LS includes Control and data processing HW, SW as well as Phy and Radio HW and FW, to construct a full communication system supporting DVB-S2X as well as other Radio and IP communication protocols.
 Responsibilities:
Landing station system validation activity including Phy, HW and SW validation.
Study system architecture and system requirements and take part in a test plan to address these requirements in collaboration with system engineering and other teams.
Define and write automatic test plans and test procedures for new systems and features.
Build test setups for fully automated regression as well as for manual tests.
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems.
Record, investigate and analyze defects.
  Investigation of root cause of test case failures and providing corrective action in conjunction with development teams.
Support Test Management tools and continuous integration methodologies.
  Data analysis and post processing of data collected.
  Compilation of regular Test execution summary report with metrics.

The Senior Hardware Test Engineer is responsible for developing, implementing, and sustaining test processes and equipment used in the manufacturing of hardware products. This role ensures that products meet quality, reliability, and performance standards through robust test strategies, automation, and continuous improvement. The engineer acts as a bridge between design engineering, manufacturing operations, and quality assurance, supporting new product introductions (NPI) through to mass production and sustaining phases.
This is a great opportunity to be part of one of the fastest-growing AI infrastructure companies in history, an organization that is in the center of the hurricane being created by the revolution in artificial intelligence.
we are the data platform company for the AI era. We are building the enterprise software infrastructure to capture, catalog, refine, enrich, and protect massive datasets and make them available for real-time data analysis and AI training and inference. Designed from the ground up to make AI simple to deploy and manage, our company takes the cost and complexity out of deploying enterprise and AI infrastructure across data center, edge, and cloud.
Our success has been built through intense innovation, a customer-first mentality and a team of fearless company ronauts who leverage their skills & experiences to make real market impact. This is an opportunity to be a key contributor at a pivotal time in our companys growth and at a pivotal point in computing history.
Role and Responsibilities:
Test Development & Validation
Design, develop, and implement test plans, test fixtures and infrastructure.
Collaborate with R&D to define test requirements early in the product lifecycle.
Develop test scripts and automation software (Python, LabVIEW, C#, etc.) to improve coverage and efficiency.
Validate test coverage, yield, and reliability through statistical analysis (GR&R, Cpk, SPC).
New Product Introduction (NPI)
Support EVT, DVT, and PVT phases with test readiness and execution.
Lead test process transfer to contract manufacturers (CMs) or ODM partners.
Train CM engineers/technicians on test systems and procedures.
Ensure compliance with safety, regulatory, and customer requirements.
Manufacturing Support & Continuous Improvement
Monitor production test yields, debug failures, and drive root cause analysis (RCA).
Implement corrective actions and continuous improvements to reduce test time, cost, and false failures.
Maintain and calibrate test equipment and fixtures.
Support ECO (Engineering Change Orders) by updating test plans and equipment accordingly.
Cross-Functional Collaboration
Work closely with hardware, firmware, and reliability engineers to improve product testability and robustness.
Partner with Quality and Operations to ensure smooth scaling into mass production.
Engage with suppliers and CM partners on test strategy alignment.

In this role, you will join Motion Control group. You will be designing, developing, and implementing advanced motion systems for the next-generation Optical Critical Dimension metrology tools, as part of a world-class R&D division.



Responsibilities
What will you be doing:

Develop and implement unique solutions integrating advanced motion control technologies, delivering innovative and "out-of-the-box" approaches tailored with cutting-edge, high-end technology.
Develop and implement Motion Control solutions for multidisciplinary systems and sub-modules.
Use excellent engineering expertise to develop and optimize servo control systems, including algorithm design and custom solution implementation.
Analyze and optimize motion control system performance to ensure compliance with specifications and stability requirements.
Take ownership of suppliers and manufacturers to establish specifications for needed equipment and keep up on the latest developments.
Present and explain product spec. Definition and design reviews presenting the motion & electronics engineering point of view.
Conduct testing, inspection, and troubleshooting guides for designed motion control or electronics modules and subsystems.
Collaborate closely with R&D activities in terms of motion control and servo solutions assistance for lab set-ups, prototypes, and jigs.

System engineers must exhibit innovative and critical thinking, deep understanding of multidisciplinary systems, and insight into physics and algorithms. They balance technical expertise with a broad view of customer needs, marketing, service, and production, defining and delivering technology solutions comprehensively. The team seeks proactive, scientifically minded experts committed to high

Responsibilities
What you will be doing:

Theoretical and experimental study of new system methods and algorithms to support state-of-the-art solutions
Define and oversee the implementation of your solutions
Hands on tool experiments and testing in clean-room environment
Service and production guidance and support on challenging topics
Collaboration and system lead with HW and SW engineers
Data and statistical analysis
Advanced logic and sequence design
Algorithm development
Performance and critical behavior testing and design
Developing practical solutions and methods for critical challenges
Conduct lab and on-site system diagnostics, troubleshooting, and problem-solving. Tasks include root-cause analysis, mitigation plans, implementing robust system calibration methods, and product transfer to manufacturing.
Intensive interface with diverse disciplines: physics, optics, algorithms, mechanics, electronics, and software.
Transform customers high-level requirements into concrete technical specifications and design.
Flights to customers around the world (2-3 times per year)

The service team is looking for a Service Engineer located in Korea to provide product support customers.

In this role you'll be joining the Global Service Group . We provide service to a large-scale install base, at leading semiconductor manufacturers worldwide.

Responsible for training, installing, and supporting all products at customer sites in Korea.

We foster teamwork, excellence, and innovation, making customer success our main goal.



Responsibilities
What you will be doing

Implement the Customer Support Policy for the OEM End User. Supervise, maintain, and support company systems in the territory.
Support OEM partners, and End Users internal service as defined under warranty and service support agreements.
Maintain, support, and guide proper training to all users, including OEM and End User personnel.
Maintain proper reporting methods for all activities of customer support as defined by the Territory Service Manager/Customer Support Manager.
Lead technical field escalation.
Involved in product evaluations activities at customer site; make sure field and customer needs are well-represented and prioritized during the product roadmap.
Assist in new equipment integration, add-ons, and upgrades.
Provide feedback to the headquarters based on experience gained with customers.
Support the customer beyond the defined working schedule as required.

The service team is looking for a Service Engineer located in China to provide product support customers.

In this role you'll be joining the Global Service Group . We provide service to a large-scale install base, at leading semiconductor manufacturers worldwide.

Responsible for training, installing, and supporting all products at customer sites in China.

We foster teamwork, excellence, and innovation, making customer success our main goal.

Responsibilities
What you will be doing

Implement the Customer Support Policy for the OEM End User. Supervise, maintain, and support company systems in the territory.
Support OEM partners, and End Users internal service as defined under warranty and service support agreements.
Maintain, support, and guide proper training to all users, including OEM and End User personnel.
Maintain proper reporting methods for all activities of customer support as defined by the Territory Service Manager/Customer Support Manager.
Lead technical field escalation.
Involved in product evaluations activities at customer site; make sure field and customer needs are well-represented and prioritized during the product roadmap.
Assist in new equipment integration, add-ons, and upgrades.
Provide feedback to the headquarters based on experience gained with customers.
Support the customer beyond the defined working schedule as required.

The service team is looking for a Service Engineer located in Japan to provide product support customers.

In this role you'll be joining the Global Service Group . We provide service to a large-scale install base, at leading semiconductor manufacturers worldwide.

Responsible for training, installing, and supporting all products at customer sites in Japan.

We foster teamwork, excellence, and innovation, making customer success our main goal.



Responsibilities
What you will be doing

Implement the Customer Support Policy for the OEM End User. Supervise, maintain, and support company systems in the territory.
Support OEM partners, and End Users internal service as defined under warranty and service support agreements.
Maintain, support, and guide proper training to all users, including OEM and End User personnel.
Maintain proper reporting methods for all activities of customer support as defined by the Territory Service Manager/Customer Support Manager.
Lead technical field escalation.
Involved in product evaluations activities at customer site; make sure field and customer needs are well-represented and prioritized during the product roadmap.
Assist in new equipment integration, add-ons, and upgrades.
Provide feedback to the headquarters based on experience gained with customers.
Support the customer beyond the defined working schedule as required.

abra R&D is seeking a System Test Engineer We are looking for a skilled System Test Engineer to join the QA team and take part in testing complex, embedded real-time systems. This role involves manual system-level testing across communication and control platforms in a multidisciplinary environment. Full-time + On Site position based in Central Israel. Key Responsibilities:
* Perform manual testing of real-time embedded systems across communication and control domains
* Write and execute test documentation: STP, STD, STR
* Collaborate with system, software, and hardware teams to ensure test coverage and product quality
* Analyze requirement documents and convert them into effective test scenarios

Were looking for a talented Radar Practical Engineer to join our innovative system and integration team.

Responsibilities:
Maintain IC lab.
IC testing (Digital and RFIC).
Working with test equipment and automation using Python.
Collaborate with internal R&D departments.