דרושים » חשמל ואלקטרוניקה » Post Sales / Application Engineer

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 34 דקות
דרושים בריקרוטיקס בע"מ
Location: More than one
Job Type: Full Time and Hybrid work
We are a company on the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, TEST, manufacturing, and optimization.
We create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries.

We are looking for Post Sales/ Application Engineer who will do the following:
Your job will be to engage with our customers as a Post-Sales Application Engineer, focusing on Design & Simulation Solutions support.
You will assist our customers to address their technical challenges using our EDA software tools.
You will bring your technical expertise at the service of our customers, focusing on their success, that includes committed response time and first in class Technical Support.
Requirements:
Degree in electronics or physics including RF /microwave and/or high-speed digital design knowledge, with typically 2 to 5 years of practical experience in one or more of technical domains such as circuit design, board level design, EM simulations, signal integrity, power integrity.
Good knowledge of one or more Tools (ADS, GOLDENGATE, EMPRO, SYSTEMVUE)
Background in Tools like Cadence Virtuoso, EMX, SIwave, Ansoft HFSS is an advantage.
Fluent in written and spoken Hebrew and English.
Excellent communication and problem-solving skills with customers, Sales Organization and R&D.
This position is open to all candidates.
 
Hide
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8904869
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
Job Type: More than one
Salary: 35,000 ויותר
RF hardware R&D
Requirements:
*Requirements:**
- Bachelor of Science (B.Sc.) in Electrical Engineering or a related technical field.
- At least 7 years of hands-on experience in RF hardware design and development.
- At least 2 years of proven experience in RF power amplifier design.
- Strong proficiency in RF simulation tools, such as Keysight ADS or Cadence AWR.
- EM simulation experience in HFSS or ADS.
- Proficiency in schematic design tools, such as Altium Designer or OrCAD Capture.
- Experience in analog circuit design and SPICE simulations.
- Strong system -level understanding of RF architectures and design trade-offs.
- Excellent analytical and problem-solving skills, with a hands-on approach to engineering challenges.
- Proficiency in a lab environment and TEST equipment.

The position is open to both men and women
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8898223
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Ra'anana
Job Type: Full Time
We are looking for an experienced Senior Signal Integrity Engineer to join our Hardware Engineering team. This role focuses on ensuring optimal signal integrity for high-speed interfaces, including Ethernet, PCIe, DDR5, and other next-generation technologies. As part of the team, you will be responsible for performing signal integrity analysis, developing signal integrity models, and ensuring electrical compliance for high-speed SERDES I/Os.
Responsibilities:
Conduct signal integrity analysis and simulations for high-speed interfaces such as 112Gbps Ethernet, PCIe Gen5, and DDR5 interfaces.
Develop and implement signal integrity guidelines for PCB design, ensuring high-performance and low-loss signal paths.
Analyze and resolve signal integrity issues related to high-speed interfaces, including reflection, crosstalk, and power delivery network (PDN) issues.
Collaborate with PCB layout engineers to optimize design for signal integrity, ensuring compliance with electrical standards and high-speed design best practices.
Perform time-domain and frequency-domain analysis, including loss, jitter, and eye-diagram analysis.
Utilize EDA tools such as Ansys SIWAVE, HFSS, or similar for simulation and validation of signal integrity designs.
Work closely with cross-functional teams to integrate signal integrity considerations into the overall hardware design process.
Develop behavioural models based on measured signal integrity data to inform future design and simulation work.
Conduct pre- and post-layout simulations and measurements for high-speed signal interfaces.
Requirements:
Bachelor's or Masters degree in Electrical/Electronics Engineering with 10+ years of relevant experience.
Strong understanding of electromagnetic (EM) concepts and transmission line theory.
Extensive experience in signal integrity analysis for high-speed serial interfaces, including Ethernet, PCIe, and DDR5.
Proficiency in using EDA tools like Ansys SIWAVE, HFSS, or similar.
Hands-on expertise in time-domain and frequency-domain analysis, jitter, loss, and eye-diagram analysis.
Strong background in HSPICE simulations and model development.
Experience with PCB layout techniques for high-speed designs.
Excellent communication skills and the ability to work effectively in a collaborative team environment.
Advantages:
Experience with advanced simulation tools and techniques.
Experience with high-speed interfaces such as 112Gbps PAM4 Ethernet, PCIe Gen5, and DDR5.
In-depth knowledge of high-speed PCB design and layout principles.
Familiarity with power integrity and power noise simulations.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8885864
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Ra'anana
Job Type: Full Time
We are seeking a highly skilled and experienced multidisciplinary engineer with a strong background in system design to join our team. In this role, you will contribute to our upcoming projects and play a key part in the rapid expansion of the Ethernet market.
As a such, you will be responsible for developing high-speed digital and analog circuit boards used in Ethernet products. Your duties will include designing board schematics, overseeing PCB layout, and conducting lab . Additionally, you will be responsible for evaluating new hardware solutions, providing technical leadership in troubleshooting and reviewing schematics, layouts, and design for manufacturability (DFM), as well as managing components selection.
Requirements:
Bachelor's or Master's degree in Electrical Engineering with 5+ years of relevant experience in hardware/board design- Must.
Expertise in PCB technology and layout for both analog and digital circuits, including stack-up, placement, routing, and signal/power integrity (SI/PI) for high-speed (ETH112G, PCIe Gen5, DDR5, etc.) and high-power systems.
Hands-on experience in high-precision signal measurement and system engineering.
Strong troubleshooting skills, with the ability to diagnose issues, identify root causes, and implement corrective actions.
Excellent verbal and written communication skills in English, enabling collaboration with design, evaluation, and production engineers, customers, technical marketing engineers, and program managers.
In-depth understanding of system architecture.
Programming knowledge and experience (a plus but not required).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8892347
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
4 ימים
חברה חסויה
Location: Herzliya
Job Type: Full Time
HW Application engineer – Job description: Nuvoton Israel is a leading supplier of microcontrollers and security hardware solutions for tier-1 customers in the computing and servers business. It is a self-contained design center, spanning from product management, system and chip architecture, through design, software development, system engineering and production. The group works closely with major customers, primarily key OEMs in the computing space, to develop semi-custom, innovative solutions for a wide range of application platforms. We are looking for a Hardware Application Engineer , to maintain and support our strong collaboration with our customers.
What You Will Be Doing Lead customers through all stages of designing their systems based on Nuvoton manageability and security microcontrollers (i.e., BMC, EC, SIO and TPM) from planning till production. Respond and resolve customer hardware related issues and requests, reported by the regional support team (FAEs) or directly by customers. Work closely with R&D, architects and PMs to provide issue resolutions, workarounds, and implement product features or support tools. Key contributor in complex debug tasks for issues found by customers; build debug strategies and hands-on work with the design team through the debug. Develop deep knowledge of customer applications and systems, recommend application solutions, design ideas and products to customer design teams. Develop and maintain technical documentation (e.g., reference schematics , application notes, design guidelines). Provide inputs and participate in next generation ICs definition based on customer inputs. Contribute to the definition of innovative and differentiated products.
Requirements:
To apply for this position, you must have B.S.c degree in electronic engineering 5+ years of board and system design experience Prior experience as a HW Engineer in the Semiconductor industry, Applications or Board design experience is preferred. Strong lab test and measurement skills and proficiency with product characterization equipment such as oscilloscope, logic analyzer, etc. Experience with complex SoCs and high speed interfaces like DDR, PCIe, USB, Ethernet. Excellent problem-solving skills and sharp attention to detail. Knowledge and experience with hands-on debugging of embedded systems. High level English communication and presentation skills. Good interpersonal skills and an ability to work directly with customers. Ways To Stand Out From The Crowd Former experience with working with Tier-1 OEM PC makers, Server and Datacenter domains and ODM in APAC Familiarity with Verilog, FPGA and CPLD implementation Programming skills like C/Python
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8781117
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
20/10/2026
Location: Kefar Sava
Job Type: Full Time
We are looking for a hands-on Electronics Engineer with practical hardware experience to join our development team in Kfar Saba.
This is a hands-on role working on advanced electronic systems - troubleshooting, component selection, and providing professional support to the development teams and to customers.
About us
An established technology company specializing in motion control and intelligent power management systems.
We develop and manufacture advanced motor controllers, power management systems, and smart circuit protection solutions tailored to the unique requirements of the defense and industrial markets.
What will you do?
Perform bring-up and initial operation of electronic boards and circuits
Identify, analyze, and resolve hardware faults and design errors
Select and qualify electronic components for existing products and new developments
Provide professional guidance and work day-to-day with PCB designers
Provide technical support to development teams and embedded software engineers
Work with customers and provide professional answers on hardware topics
Collaborate with the development, production, and integration teams
Take part in product improvement and development processes.
Requirements:
Qualifications
B.Sc. in Electronics Engineering or Practical Engineering diploma in Electronics
3-5 years of experience in the field
Hands-on experience with analog circuits
Ability to read electrical schematics and understand circuit operation
Significant knowledge and experience in power electronics
Experience in hardware debugging
Significant advantages
Experience in electronic circuit design
Experience working with PCB designers
Experience working with laboratory equipment
Experience working with embedded systems
Experience providing technical support to customers
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8864740
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Herzliya
Job Type: Full Time
Were looking for a mid-level or senior hardware engineer to own custom electronics across our humanoid platform, with a strong emphasis on motor-drive and power electronics alongside embedded control, sensor interfaces, and communication boards. Youll take projects from requirements and architecture through circuit design, PCB implementation, bring-up, validation, and production transfer. PCB layout is currently supported by external partners. Youll define the constraints, guide implementation, review the results, and remain accountable for the complete board design. We welcome engineers who use AI-assisted design and verification tools effectively while applying sound electrical judgment and measurement-based validation.
What will your job look like:
Own board requirements, architecture, circuit design, component selection, and schematic capture across multiple projects.
Design motor-drive electronics, gate-driver circuits, current sensing, protection, DC-DC conversion, and power distribution.
Develop MCU-based control boards, sensor interfaces, and mixed-signal circuits.
Design communication interfaces such as EtherCAT, Ethernet, CAN/FDCAN, RS-485, SPI, I²C, UART, and USB as required.
Define PCB stack-ups, placement and routing constraints, grounding, thermal requirements, and signal- and power-integrity considerations.
Guide external PCB layout partners and review placement, routing, manufacturin
Requirements:
4+ years of relevant hardware-development experience, including independent ownership of boards through bring-up and validation.
B.Sc. in Electrical/Electronics Engineering or equivalent proven practical experience.
Strong foundations in analog, digital, mixed-signal, and power circuit design.
Proven experience with motor-drive or power-electronics circuits, including switching stages, gate drivers, sensing, and protection.
Experience with microcontroller-based systems, sensor interfaces, and digital communication circuits.
Ability to define and review multilayer PCB implementation, including high-current paths, grounding, thermal management, controlled impedance where needed, and EMI/EMC considerations.
Proficiency with schematic and PCB design tools; Altium Designer preferred but any CAD is sufficient.
Strong hands-on debugging skills using oscilloscopes, differential and current probes, multimeters, and other relevant lab equipment.
Ability to coordinate external design partners, manage concurrent projects, and maintain clear engineering documentation.
Nice to have:

Experience with compact BLDC/PMSM motor controllers and actuator electronics.
Precision current sensing, encoder interfaces, and low-noise analog design.
EtherCAT, Ethernet, and CAN/FDCAN hardware integration.
Advanced high-speed digital design, HDI, flex, or rigid-flex boards.
Circuit simulation, thermal analysis, and signal- or power-integrity analysis.
Experience with manufacturing test, EMC validation, component lifecycle management, and production transfer.
Effective use of AI tools for design review, analysis, verification, and engineering automation.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8902823
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
03/11/2026
Location: Ra'anana and Yokne'Am Illit
Job Type: Full Time
we have continuously reinvented ourselves over two decades. our invention of the gpu in 1999 sparked the growth of the pc gaming market, redefined modern computer graphics, and revolutionized parallel computing. more recently, gpu deep learning ignited modern ai - the next era of computing. we are a learning machine that constantly evolves by adapting to new opportunities that are hard to seek, that only we can pursue, and that matter to the world. this is our life's work, to amplify human creativity and intelligence. make the choice to join us today.
what you'll be doing:
working closely with product design engineers, you'll perform pcb layout of high speed/high-density value-conscious pcbs for all business units at the company (gpu desktop, notebook, automotive, professional, data center, deep learning, and ai), all using cadence pcb design tools.
focus will be on the complete development of cad layout from symbol creation, floor planning, and detailed component placement, constraints management, with a concept of topology and signal/trace integrity.
you will be responsible for the design releases required generation of artwork files, odb++, and electronic pcb documentation.
your designs will need to follow si constraints, emi/rfi control and fcc, ul and european regulations, ipc specifications and nrc regulations.
Requirements:
what we need to see:
b.sc. in Electronic Engineer degree or equivalent experience.
5+ years of experience in high-speed design.
having a detailed knowledge of circuit design and consideration for layout, routing, and timing constraints, dfm, dfa, dft constraints in volume manufacturing is needed for this role.
be an authority in using cadence allegro pcb design tools.
have a deep understanding of high-density interconnect pcb layout and pcb signal integrity.
knowledge in pcb manufacturing processes for hdi, standard thru-hole, and back-drilling.
proven ability to work with a team while taking personal responsibility for your own contributions.
agility in changing focus as the needs of our effort evolve.
strong leadership, communication, and presentation abilities.
ways to stand out from the crowd:
experience in crafting pcbs in the 25gbps + range using back-drilling technology.
designing sophisticated multi-layer hdi pcb's for very dense placement and routing is helpful.
we are widely considered to be one of the technology world's most desirable employers. we have some of the most forward-thinking and hardworking people in the world working for us. if you're creative and autonomous, we want to hear from you!
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8883044
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
חברה חסויה
Location: Ra'anana
Job Type: Full Time
the company is at the forefront of next-generation cellular communication systems. we build licensable 5g modem ip for user equipment (ue) and base stations, from iot-class devices to high-throughput infrastructure. our platforms target the latest 5g-advanced releases.
a fast-growing focus is space and satellite infrastructure: 5g satellite networks that bring standard cellular connectivity to leo/geo satellites and direct-to-device links. this domain brings unique challenges, including large doppler shifts, long round-trip delays, radiation-aware design and tight power budgets.
about the role
as a senior vlsi designer, you'll lead the full design flow of advanced DSP cores and baseband hardware accelerators, from architecture to timing closure. this hands-on role is central to developing the ips behind our next-generation modem products. it comes with strong cross-functional collaboration (algorithms, architecture, verification, backend and customers) and real technical ownership.
what youll do
design and implement high-performance 5g baseband DSP cores and hardware accelerators for transmit and receive chains.develop programmable DSP architectures for multi-antenna systems, including satellite connectivity.
own the design flow from architecture and rtl development through verification support, synthesis, and timing closure.
ptimize power, performance, and area (ppa) in collaboration with backend and cross-functional teams.
work closely with algorithm, verification, backend, and software teams, as well as customers, from specification to silicon bring-up.
Requirements:
b.sc./m.sc. in electrical engineering
5-10 years of experience in vlsi design
proficiency in rtl design (verilog/systemverilog), synthesis and timing analysis
familiarity with eda tools (synopsys, cadence, siemens eda/mentor)
strong understanding of digital design principles, SOC architecture and low-power techniques
excellent problem-solving and communication skills
advantages
knowledge of signal processing and digital communication systems
experience with cdc/rdc analysis, dft and multi-power-domain design
experience delivering licensable ip to external customers
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8904625
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
02/11/2026
Location: Herzliya
Job Type: Full Time
Required Hardware Design Engineer (Board Design)
Description:
We are a global leader in the development of advanced airborne defense, intelligence, and surveillance solutions for military, governmental, and commercial aviation.
Our innovative technologies are deployed worldwide, supporting mission-critical operations and protecting aircraft through advanced multidisciplinary systems.
As we continue to grow, we are looking for a talented Hardware Design Engineer (Board Design) to join our Hardware Development team and contribute to the design and development of advanced electronic boards for complex aerospace and defense systems.
What Youll Do:
Design, develop, and modify electronic boards throughout the entire product lifecycle.
Perform board bring-up activities following development and initial manufacturing.
Troubleshoot hardware issues, analyze failures, and implement design improvements.
Edit schematics and support PCB layout activities.
Improve product manufacturability and maintain production documentation.
Support PCB manufacturers and electronic assembly subcontractors while ensuring compliance with IPC standards.
Investigate manufacturing failures and provide engineering solutions.
Work closely with multidisciplinary teams including Mechanical, Software, Firmware, and System Engineering.
Participate in design reviews (PDR/CDR).
Prepare engineering documentation, test procedures, and product verification documents.
Support the transition from development to production.
Requirements:
B.Sc. in Electrical Engineering / Electronics Engineering - Mandatory.
Up to 5 years of professional experience in Hardware Design Engineering (excluding mandatory military service).
Proven experience in analog board design and high-power power supply design - Mandatory.
Hands-on experience performing board bring-up for digital boards and power supply boards - Mandatory.
Experience with schematic editing and PCB layout support - Mandatory.
Experience preparing and participating in design reviews (PDR/CDR) - Mandatory.
Experience writing ATP and POD documentation - Mandatory.
Experience supporting PCB manufacturing and electronic board assembly.
Strong proficiency with OrCAD and Allegro.
Excellent Microsoft Office skills.
Fluent Hebrew and English.
Nice to Have:
Experience in the aerospace and defense industry.
Experience working with complex multidisciplinary systems.
Familiarity with IPC standards and production processes.
Strong understanding of development in compliance with MIL-STD and DO-160 testing standards.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8881376
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
20/10/2026
Location: Kefar Sava
Job Type: Full Time
We are looking for an Electrical & Electronics Engineer to join our R&D department in Kfar Saba.
This is a varied, technical role supporting development, integration, testing, and troubleshooting of electronic systems - an opportunity to grow professionally while working on challenging, advanced projects.
About us
An established technology company specializing in motion control and intelligent power management systems.
We develop and manufacture advanced motor controllers, power management systems, and smart circuit protection solutions tailored to the unique requirements of the defense and industrial markets.
What will you do?
Provide ongoing support to the development team in development, integration, and testing
Perform hardware testing and troubleshooting of electronic boards and systems
Analyze faults, perform root-cause analysis, and propose solutions to hardware issues
Read and interpret electrical drawings and electronic schematics
Perform measurements and tests using lab equipment such as DMMs, oscilloscopes, power supplies, spectrum analyzers, and other instruments
Perform lab tests and functional checks on products and systems
Support product qualification, verification, and validation testing
Document test results, faults, and solutions
Write and update technical documents, test procedures, and reports
Work closely with hardware, software, and systems engineers
Requirements:
Qualifications
B.Sc. in Electrical / Electronics Engineering - required
Good knowledge and understanding of analog and digital electronics
Ability to read and understand electrical drawings and electronic schematics
Experience in hardware troubleshooting - required
Experience with laboratory equipment: oscilloscope, multimeter, power supplies, spectrum analyzer, etc.
Good technical English
What do you bring?
Self-learning ability and comfort tackling new technical topics
Analytical problem-solving, systematic thinking, and attention to detail
Ability to write and maintain technical documentation
Ability to work independently and as part of a team
Strong technical and hands-on skills
Ability to work in a dynamic environment and under pressure.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8864737
סגור
שירות זה פתוח ללקוחות VIP בלבד