לוח משרות דרושים מהנדסי מכונות משרה מלאה

we are a global pioneer of RADAR systems for active military protection, counter-drone applications, critical infrastructure protection, and border surveillance. We are looking for a talented Technical Manager to join our team. Core Mission: Ensure rigorous Quality Assurance throughout the development lifecycle of hardware-based radar systems, driving toward zero defects in design, testing, and pre-production phases. Lead quality planning, risk mitigation, and compliance for multiple radar development projects running in parallel. Key Responsibilities:
* Develop and execute Quality Assurance plans tailored to hardware development (radar systems), focusing on materials, components, assembly, integration, and validation.
* Define hardware-specific KPIs/KGIs (e.g., First Pass Yield, TEST Coverage, Defect Density in prototyping, Non-Conformance Rates)
* Act as quality authority in hardware-focused design reviews:
* SRR ( system Requirements Review) - Ensure requirements are testable and meet standards.
* PDR (Preliminary Design Review) - Assess design maturity, component selection, and tolerancing.
* CDR (Critical Design Review) - Verify design readiness for prototyping, focusing on manufacturability, reliability, and safety.
* TRR ( TEST Readiness Review) - Validate TEST setups, instrumentation, and acceptance criteria.
* PRR (Production Readiness Review) - Ensure design is transition-ready with robust quality controls.
* Conduct hardware-focused FMEA on RF modules, power systems, structural elements, thermal management, and integration interfaces.
* Implement preventive/corrective actions to address identified failure modes early in development.
* Oversee design verification testing (DVT) and reliability testing (e.g., HALT/HASS, thermal cycling, vibration, EMI/EMC).
* Approve TEST plans, procedures, and reports for hardware performance and compliance.
* Chair Change Control Board (CCB) meetings for hardware changes (BOM revisions, component substitutions, drawing updates).
* Maintain traceability of requirements, designs, tests, and revisions.
* Ensure adherence to AS9100 and MIL STD as 810,882,461
* Support safety certification processes (functional safety for hardware subsystems) according to MIL- STD -882
* Lead cross-functional Root Cause Analysis (e.g., 8D, 5Why) for hardware non-conformances.
* Drive systematic corrections into design and development processes to prevent recurrence.
* Collaborate with suppliers on critical components (e.g., PCBA, antennas, enclosures) to ensure design intent is met and quality is built in.

Responsibilities:
Review of Contract ,Customer SOW and SPEC requirements to ensure compliance of design and production.
Approve gates review at R&D
PLCM (Project Life Cycle Management) - process control, full partnership in project management during the development, testing, production, customer delivery and customer support phases throughout the product life
Identifying regulatory Gaps in new and carrent projects
Perform Internal and External Audits
QA presence in R&D process (capacity) and ability to prevent errors in design
Follow up after R&D corrective and preventive actions and Improvement Plans
Transfer products from development to NPI and serial production (QA activities)
Review and approval ECO / MCO / ATP/ATR, Waiver relate to R&D , ENG
Writing QA procedures
FRACAS Management
Quality Assurance Program Plan (QAPP) and the Quality Allocation Tasks for the program.
Customer complince - relate to NPI , Pre production , design errors
Perform Quarterly data analysis for QBR.

Responsibilities
Design of new, and support of existing airborne, marine and stationary pedestals to meet with environmental requirements.
Produce designs meeting performance, cost and manufacturability goals
Create fabrication and assembly drawings as well as related documentation
Support prototype assembly, assist in integration and test.

Responsibilities
Design of new, and support of existing airborne, marine and stationary pedestals to meet with environmental requirements.
Produce designs meeting performance, cost and manufacturability goals
Create fabrication and assembly drawings as well as related documentation
Support prototype assembly, assist in integration and test

As a member of Design Engineering Group, you will be responsible for escorting new products from R&D to production and managing a team of 4 engineers



Manager NPI & CPE

Coordinate and participate with local and abroad R&D teams on design for manufacturability and implementation of new products in the production line
Monitor and interact with R&D project managers, system engineers and designers to optimize design for operations needs
Optimize and manage design changes for contract manufacturing and full turnkey (DFX)
Manage and control Turnkey activities for system building/subunits local and overseas
Conduct ECO processes to assure system quality, manufacturability and improvements
Manage Sub contractors for Assembly lines and mechanical/ electromechanical parts manufacturing.
Define the product integration processes
Be responsible for building Product/ Production file, Product documentation, BOM, jigs and tools design
Additionally, develop workflows, protocols, and provide tactical direction, programs, support in the administration of NPI and mechanical engineering
Develop, manage and conduct FAI processes for new products and their assemblies
Represent Engineering at PLCM gates and product management forums

CPE

Increase quality, reliability and serviceability by designing improved sub-units for current systems
Design new jigs and fixtures for current products
lead cost savings through hardware redesigns
Field POC for current product support
support current product revitalizations and improvements
Manage EOL and 2nd source activities
Coordinate and participate with local and abroad R&D teams on design for manufacturability and implementation of existing products in the production line
Monitor and interact with R&D project managers, system engineers and designers to optimize design for operations needs
Optimize and manage design changes for contract manufacturing and full turn-key (DFX)
Support the Production line and customer support on an on-going basis including managing escalations
Develop, manage and conduct FAI processes for new assemblies
Serve as Operations technical link to R&D (SW, ME, EE, SE)

Provide real-time engineering support to the production line, resolving electrical and mechanical issues.
Lead initiatives to improve first pass yield, reduce cycle time, and enhance process efficiency.
Develop, and maintain work instructions, assembly guides, drawings, wiring diagrams and production documentation.
Develop, and maintain tooling and fixtures to ensure consistent performance and compliance with quality standards.
Support new product introductions by readying production lines, validating manufacturing processes, and collaborating closely with cross‑functional teams to ensure a smooth ramp‑up.
Oversee second-source qualifications for mechanical components, ensuring supply chain resilience and quality consistency.
Identify and implement solutions to reduce rework and scrap rates, contributing to overall cost reduction and product reliability.
Manage communication with key subcontractors and external partners to resolve manufacturing challenges and align quality and delivery expectations.
Lead or provide engineering support for cross-functional projects that support strategic manufacturing goals, including automation, lean initiatives, and capacity scaling, when required.

As part of this role you will:

Provide real-time engineering support to the production line, resolving first-tier mechanical issues and escalating complex problems as needed.
Lead initiatives to improve first pass yield, reduce cycle time, and enhance labor efficiency through data-driven analysis and corrective actions.
Develop, update, and maintain clear and effective work instructions, assembly guides, and production documentation.
Manage the maintenance and calibration of tooling and fixtures to ensure consistent performance and compliance with quality standards.
Support new product introductions (NPIs) and end-of-life (EOL) transitions by preparing production lines, validating processes, and coordinating with cross-functional teams.
Drive second-source qualifications for mechanical components, ensuring supply chain resilience and quality consistency.
Identify and implement solutions to reduce rework and scrap rates, contributing to overall cost reduction and product reliability.
Collaborate with subcontractors and external partners to resolve manufacturing challenges and align quality and delivery expectations.
Lead or provide engineering support for cross-functional projects that support strategic manufacturing goals, including automation, lean initiatives, and capacity scaling, when required.
Perform additional tasks and responsibilities as required to support the team, the factory, and the companys core business.

We are seeking an IC Production Manager to lead semiconductor hardware operations and manage Outsourced Semiconductor Assembly and Test (OSAT) partners, as well as multiple hardware and tooling suppliers.
This role is responsible for driving efficient hardware and tooling management, optimizing OSAT partnerships, and ensuring scalable, cost-effective supply across the semiconductor value chain.
Key job responsibilities
Hardware & Inventory Management
Develop, implement, and maintain robust inventory management systems for semiconductor hardware, including test boards, probe cards, and related equipment located at various locations around the manufacturing partners
Design and deploy digital tools to track hardware movement, utilization, availability, and maintenance schedules
Establish real-time visibility into hardware location, status, and lifecycle stage
Create and maintain hardware lifecycle management processes from deployment through end-of-life
Lead inventory audits and reconciliation activities with OSAT partners
OSAT & Supplier Management
Act as the primary point of contact for day-to-day communication with OSATs and strategic suppliers
Coordinate hardware allocation, maintenance, repair, and replacement activities with OSAT partners
Oversee and monitor supplier deliveries, capacity commitments, and operational performance
Conduct supplier audits, performance reviews and scoring
Build, manage, and maintain strong working relationships with OSAT partners
Commercial & Contractual Leadership
Lead commercial negotiations with strategic suppliers to improve pricing, terms, and overall cost structure
Own contract management and negotiation, including:
o Master Development and Supply Agreements (MDSA)
o Statements of Work (SOW)
o Product schedules and related commercial documents
Strategic Sourcing & Capacity Planning
Develop and execute strategic sourcing allocation including supplier selection, operating models, and pricing frameworks
Drive supply chain capacity planning, including tooling strategy, production equipment planning, and supplier allocation/split
Analyze hardware utilization and supply chain data to optimize inventory levels and reduce operational costs
Cross-Functional Collaboration & Compliance
Develop KPIs and reporting dashboards to track hardware performance, supplier efficiency, and operational health
Create and maintain documentation for hardware handling procedures, quality standards, and compliance requirements
Collaborate closely with engineering teams to ensure proper handling, storage, and usage of sensitive semiconductor equipment.

Eco Wave Power, a fast growing publicly traded renewable energy company based in central Tel Aviv, is looking for a talented Mechanical Engineer to join the multidisciplinary engineering team.
Objectives of this role:
Designing and modeling mechanical parts and assemblies
Preparing manufacturing drawings
Technical documentation of R D processes.
Preparation and submission of technical reports for grants.
Assistance in the preparation of new patents on the Companys proprietary technology.
Writing reports and studies on the Companys technology and operational projects.
Technical documentation of different elements related to technology, projects, products etc
Calculations and feasibility studies for projects.

At our company, we're working to be the most customer-centric company on earth. To get there, we need exceptionally talented, bright, and driven people. If you'd like to help us build the place to find and buy anything online, this is your chance to make history.
The Global Services team is looking for exceptional individuals to join our Controls team as Controls Engineer, responsible for the building automation systems within our company. If you are passionate about the Customer Experience, think and act globally and have the ability to contribute to major new innovations in the area of building controls and automation this is the challenge you are looking for!
The ideal candidate will possess a /construction management, mechanical, electrical or technology background that enables him/her to undertake the challenges of sophisticated controls platforms and a demonstrated ability to think broadly and strategically in aligning building controls and automation with the larger objectives of the business.
Role Responsibilities and Requirements:
- Understanding of: electrical diagrams, control diagrams, building operations, control circuits, industrial HVAC.
- Ability to ascertain customer needs to help develop scope and specifications.
- Ability to manage scope of work relative to the site specifics and customer needs.
- Ability to manage engineering to determine the scope of work relative to the design intent of the customer needs.
- Ability to read and interpret specifications and implementing those specifications as they apply the work environment.
- Development of control panel BOMs.
- Development of ISA sheets for temperature, level, flow, and pressure transmitters along with ISA sheets for control valves, positioners, analytical, and various other types of instrumentation.
- Development of drawings for control panels, power distribution, junction boxes. Included in the drawings are the general arrangement, internal layout, schematics and interconnection and wire diagrams.
- Development of logic diagrams in the International Automation format for complex logic devices such as Programmable Logical Controller and Distributed Control System.
- Preparation of cable, routing plans and schedules.
- Performing inspects, testing, and commission of the facility systems.
- Work individually and as part of a team to develop new products, support existing products, test and evaluate equipment.
- Provide technical assistance as needed to internal customers.
- Coordinate work internally within the department and externally with other departments to ensure on-time completion of projects within budget.
- Manage service contracts with various vendors.
- Must be business proficient in English.