לוח משרות דרושים מהנדס אלקטרוניקה בהרצליה, לחיפוש זה נמצאו 27 משרות

Requirements:
B.Sc. in Electronics Engineering , Aerospace or Systems Engineering - MUST.
At least 3 years of experience in systems engineering, test, or integration, preferably in defense or avionics.
Strong technical writing skills in both Hebrew and English.
A broad understanding of hardware, firmware, software, and mechanical disciplines.
Familiarity with laboratory measurement equipment and basic debugging techniques.
Basic knowledge of embedded systems and communication interfaces.
Good analytical and problem-solving skills.
Good technical documentation and reporting skills.
Good command of written English.
Ability to work independently while collaborating effectively with multidisciplinary teams.
Advantages:
Ability to read and understand electrical schematics and technical documentation.
Familiarity with MIL-STD ,environmental qualification.
Experience with Python or other scripting languages for test automation and data analysis.
Familiarity with FPGA, MCU, and embedded software.

Requirements:
B.Sc. in Electrical Engineering / Electronics Engineering - Mandatory.
Up to 5 years of professional experience in Hardware Design Engineering (excluding mandatory military service).
Proven experience in analog board design and high-power power supply design - Mandatory.
Hands-on experience performing board bring-up for digital boards and power supply boards - Mandatory.
Experience with schematic editing and PCB layout support - Mandatory.
Experience preparing and participating in design reviews (PDR/CDR) - Mandatory.
Experience writing ATP and POD documentation - Mandatory.
Experience supporting PCB manufacturing and electronic board assembly.
Strong proficiency with OrCAD and Allegro.
Excellent Microsoft Office skills.
Fluent Hebrew and English.
Nice to Have:
Experience in the aerospace and defense industry.
Experience working with complex multidisciplinary systems.
Familiarity with IPC standards and production processes.
Strong understanding of development in compliance with MIL-STD and DO-160 testing standards.

Requirements:
Responsibilities
* Design and develop real-time embedded software in C/C++ on ARM-based platforms (STM32, Xilinx Zynq / UltraScale+) under an RTOS or bare metal
* Bring up new boards: low-level drivers, BSP, bootloader and embedded Linux kernel adaptation
* Implement and integrate communication interfaces and protocols (SPI, I2C, UART, RS-422/485, Ethernet, TCP/IP)
* Work closely with hardware, FPGA and RF engineers to define and debug HW/SW interfaces
* Debug in the lab with oscilloscopes, logic analyzers and JTAG debuggers
* Implement and optimize signal-processing and control algorithms on embedded targets
* Build PC-side test, simulation and automation tools (Python, C#)
* Own modules end to end: requirements, design, documentation, integration, testing and field trials Requirements
* B.Sc. or M.Sc. in Electrical or Electronics Engineering
* 5+ years of hands-on real-time embedded software development
* Strong C and C++ on ARM microcontrollers or SoCs
* Development on an RTOS (e.g. VxWorks, FreeRTOS, uC/OS, INTEGRITY) or bare metal, not only embedded Linux
* Proven board bring-up and low-level driver/BSP experience, including lab debugging with a scope and logic analyzer
* Hands-on experience with peripheral and communication interfaces: SPI, I2C, UART, RS-422/485, Ethernet, TCP/IP
* Professional working English (reading and writing technical documents)
?Advantages Strong advantage:
* Signal processing, communications or RF background: DSP algorithms, SDR, modems, radar, image or video processing
* FPGA exposure (VHDL/Verilog, Xilinx Vivado or Intel Quartus), enough to work closely with FPGA developers
* Defense, airborne, UAV or electro-optical systems experience
* Built a system from scratch through integration and field trials
* Writes own PC-side tools in Python, C#, Qt or LabVIEW Nice to have:
* Xilinx Zynq / UltraScale+ experience
* Embedded Linux kernel, u-boot and Yocto/Buildroot
* Technical leadership or module ownership in a small team
* DO-178 or another safety-critical development process
* Hebrew

Requirements:
Minimum Qualifications
MSc in Optics, Physics, Electrical Engineering or a related field, with at least 3 years of hands-on experimental and analytical experience
Strong data analysis and visualization - digest empirical data in a way that answers the question, and explain why that is the right way to look at it
Experience designing experiments to isolate a single effect, with the statistical judgment to assess sample size, repeatability and measurement error
Detailed understanding of optical sensing and imaging systems: image sensors, illumination sources, optical elements, and the tolerances that govern them
Great interpersonal skills - working collaboratively with peers and colleagues across the organization
Preferred Qualifications
PhD in a relevant field (Optics, Physics, EE) or equivalent
Background in image quality assessment and associated metrics
Background in depth sensing, calibration, or autofocus systems
Experience with large-scale data handling, automated analysis pipelines, or applying AI tooling to engineering analysis
Hands-on lab experience with optical setups and electrical equipment
Experience in the consumer electronics industry and with vendors
Experience defining and tracking requirements and specifications from system level through sub-modules and components

Requirements:
Minimum Qualifications
Bsc/Msc in Electrical Engineering
5+ years of experience in the field
At least 2+ years of experience in writing ASIC timing constraints and achieving timing closure
Expertise in STA tools (Primetime) and flow generation
Knowledge of the ASIC design timing closure flow and methodology
Preferred Qualifications
Understanding of timing corners/modes
Familiarity with process variations and signal integrity-related issues
Hands-on experience in generating and managing timing/SDC constraints, proficient in scripting languages (Tcl and Perl)
Knowledge of synthesis, DFT, and backend-related methodologies and tools
Strong communication skills are required, as you will interact with various groups

Requirements:
Minimum Qualifications
3+ years of experience in physical design of large-scale SoCs
B.Sc / M.Sc Electric Engineering / Computer Engineering
Extensive experience with one of the place & route tools (Synopsys / Cadence)
Scripting and Programming experience using either TCL or Python or Perl, or known Shell scripting languages
Preferred Qualifications
Knowledge in Verilog - advantage

Requirements:
Minimum Qualifications
3+ year experience in VLSI design of Processor Cores/SoC.
Familiar with advanced design practices (Clock/Voltage domain crossing and Low Power Design).
Strong Verilog/System Verilog skills
Familiar with CPU/ARM instruction set standard - an advantage
Familiar with the various backend tools (synthesis and STA) - an advantage.
Experience with scripting and programming experience using several of the following: Perl, C, Python, and TCL.
BS.c/ MS.c in EE/ CE
Preferred Qualifications
Familiar with verification methodologies - an advantage
Familiar with CPU/ARM instruction set standard - an advantage
Familiar with the various backend tools (synthesis and STA) - an advantage

Requirements:
Minimum Qualifications
5+ years of experience in digital design
Prefer previous experience in USB4, USB3, PCIe, and/or DisplayPort
Experience in SoC front-end ASIC RTL digital logic design using Verilog or System Verilog
Experience working multi-functionally with architecture, design, and verification teams to specify, design, and debug
Good collaboration skills with strong written and verbal communication skills
Familiarity with low-power design techniques such as clock- and power-gating is a plus
Prefer familiarity with common on-chip bus protocols such as AMBA (AXI, AHB, APB)
Experience in front-end implementation tasks such as synthesis, timing, area/power analysis, linting, and logic equivalence checks
Industry exposure to and knowledge of ASIC/FPGA design methodology including familiarity with AI/ML applications, relevant scripting languages (Python, Perl, TCL)
Preferred Qualifications
BS.c / MS.c in EE/ CE

Requirements:
Minimum Qualifications
Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering in a leading University
4+ years of experience in software or test automation engineering
Proficiency with Python and Pytest
Experience testing embedded systems, firmware, or hardware-in-the-loop (HIL) setups
Experience building and maintaining CI/CD pipelines
Working knowledge of Git and Linux environments
Ability to quickly ramp up in new technical domains and adopt unfamiliar technologies
Preferred Qualifications
Experience building end-to-end test infrastructure for hardware/software automation projects
Strong failure analysis, troubleshooting, and system-level debugging skills
Experience with lab instruments (power supplies, oscilloscopes, etc.) and their automation APIs
Experience with MCUs (such as ESP32 or STM32) for building test fixtures and station controllers
Strong Bash scripting skills
Strong written communication skills, with the ability to turn a complex failure into a clear, reproducible bug report

Requirements:
* B.Sc. / M.Sc. in Computer Science, Electrical Engineering, or a related field from a leading institute.
* Strong programming and scripting skills in C / C ++, TCL, Python, and Linux shell scripting.
* Experience leveraging Generative AI tools for software development, automation, and productivity enhancement.
* Solid understanding of IC design and verification flows, with at least 5 years of hands-on experience using semiconductor EDA tools from Synopsys, Cadence, or Siemens EDA.
* Expertise in Physical Layout Verification is required, including ownership and debugging of LVS, DRC, ERC, Antenna, and PERC signoff checks on complex SOC and mixed-signal designs.
* Experience with Siemens Calibre verification flows and RC extraction using StarRC and/or Calibre xACT is highly preferred.
* Experience with Git-based development flows is an advantage.
* Experience in IC design and/or verification is an advantage.
* Service-oriented, self-motivated, and possessing strong analytical and problem-solving skills.

Requirements:
What We're Looking For:
* Bachelor's degree in Engineering (any discipline) - Systems Engineering is an advantage
* Proven experience in System of Systems design, development, integration, and test equipment utilization in the fields of C4I, communication, radars, electro-optics, and intelligence sensors
* Experience with system integration and testing methods
* Strong understanding of aerospace industry standards and practices
* Excellent problem-solving and analytical skills
* Ability to prioritize and execute tasks in a high-pressure, team-oriented environment
* Strong customer service orientation
* Effective communication skills in English Nice to Have:
* Airborne systems, qualification, and certification
* C2 systems and intelligence sensors
* Communication protocols and wireless communication
* OS and network management
* Proficiency in system design / simulation software

Requirements:
Requirements

B.Sc. with honors in CS/EE/Math/Physics, or a related field from a top-tier university.

5+ years of hands-on experience building and deploying large-scale deep learning systems in production.

Advanced proficiency in PyTorch/TensorFlow.

Preferred Qualifications :

M.Sc. or Ph.D. in a relevant quantitative field - Advantage.

Proficiency in Python/C/C++.

Deep, working knowledge of PyTorch internals.



Strong experience in several of the following areas:

Performance profiling and optimization of deep learning workloads.

Orchestrating and optimizing large-scale distributed training (hundreds to thousands of GPUs).

Optimizing model serving and inference pipelines (quantization, distillation, compilation, memory optimization, etc.).

Training and scaling state-of-the-art vision, language, or diffusion models.

Implementing custom CUDA/Triton kernels.

Requirements:
· B.Sc. in Electrical Engineering / Electronics Engineering – Mandatory · Up to 5 years of professional experience in Hardware Design Engineering (excluding mandatory military service). · Proven experience in analog board design and high-power power supply design Mandatory · Hands-on experience performing board bring-up for digital boards and power supply boards – Mandatory · Experience with schematic editing and PCB layout support – Mandatory · Experience preparing and participating in design reviews (PDR/CDR) – Mandatory · Experience writing ATP and POD documentation – Mandatory · Experience supporting PCB manufacturing and electronic board assembly. · Strong proficiency with OrCAD and Allegro · Excellent Microsoft Office skills. · Fluent Hebrew and English. Nice to Have · Experience in the aerospace and defense industry. · Experience working with complex multidisciplinary systems. · Familiarity with IPC standards and production processes. Strong understanding of development in compliance with MIL-STD and DO-160 testing standards Why Join BIRD Aerosystems? · Work on advanced aerospace and defense technologies with global impact. · Take part in designing complex electronic systems deployed worldwide. · Collaborate with experienced engineers across multiple disciplines. · Join a professional, innovative, and growing organization. · Develop your expertise in a challenging and technology-driven environment. If you are passionate about hardware development, electronics, and advanced aerospace technologies, we would love to hear from you.

Requirements:
To apply for this position, you must have
* B.S. C degree in electronic engineering
* 5+ years of board and system design experience
* Prior experience as a HW engineer in the Semiconductor industry, Applications or Board design experience is preferred.
* Strong lab TEST and measurement skills and proficiency with product characterization equipment such as oscilloscope, logic analyzer, etc.
* Experience with complex SoCs and high speed interfaces like DDR, PCIe, USB, Ethernet.
* Excellent problem-solving skills and sharp attention to detail.
* Knowledge and experience with hands-on debugging of Embedded systems.
* High level English communication and presentation skills.
* Good interpersonal skills and an ability to work directly with customers. Ways To Stand Out From The Crowd
* Former experience with working with Tier-1 OEM PC makers, Server and Datacenter domains and ODM in APAC
* Familiarity with Verilog, FPGA and CPLD implementation
* Programming skills like C / Python