משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 21 שעות
חברה חסויה
Location: Hod Hasharon
Job Type: Full Time
As an RF System Engineer, you will develop solutions for state-of-the-art RFICs in advanced 4G/5G IoT devices. Your responsibilities include designing and supporting all RF aspects of IoT technologies, from RFIC bring-up and system-level performance evaluation to calibration flows and RF measurement tools. You will also collaborate with Architecture, Firmware, Software, and Hardware teams, in addition to providing technical support and addressing customer RF issues.

Responsibilities
Define and implement the RFIC and Peripherals APIs
Development and implementation of advanced RF calibration processes
Simulation and verification of RF calibrations
Testing and analysis issues which raise during development stage
Support customer issues which related to RF
Requirements:
B.Sc. degree from a recognized university (additional Practical Engineer qualification is a plus)
Knowledge in MATLAB and/or Python
This position is open to all candidates.
 
Hide
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8496641
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
דרושים באיילת אלבז
Job Type: Full Time
A Defense Technology startup is looking for a
system Engineer.
Full Time - Sharon area.


Responsibilities -
Own the system architecture and system -level design across the full
product lifecycle.
Collaborate closely with the Product team to understand operational
scenarios, performance targets, and product-level requirements.
Translate product requirements into system architectures, system
requirements, and interface definitions.
Lead system -level design decisions and architectural trade-offs to
meet performance, reliability, safety, and scalability objectives.
Provide system -level feasibility assessments, constraints, and trade-
off analyses to support product decisions.
Define and maintain system interfaces, boundaries, and allocation of
responsibilities between subsystems.
Support system integration and cross-domain coordination to ensure
coherent end-to-end system behavior.
Requirements:
BSc. in Engineering (Mechanical, Electrical, Aeronautical, or
Electronics).
At least 4 years of experience as a system Engineer.
Proven experience developing autonomous, aerial, or defense-grade
systems.
Ability to define and implement system engineering processes and
methodologies.
Strong ability to work independently and within cross-functional
teams.
Excellent communication skills, capable of engaging effectively at
both technical and decision-making levels.
Hebrew, English - Speaking, reading and writing at high level.
Experience in the defense industry - Advantage.
Experience with UAVs, autonomy stacks, robotic systems - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8498133
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
דרושים בקורן טק טכנולוגיות
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
עבודה כמהנדס/ת מערכת על מערכות שוב ותקשורת בפלטפורמות צבאיות
ליווי פרויקטים מקצה לקצה מול צוותי פיתוח ואינטגרציה
הגדרת דרישות, ארכיטקטורה והובלת סקירות תכן
דרישות:
תואר רלוונטי בהנדסת חשמל / מכונות / אווירונאוטיקה
ניסיון בהנדסת מערכת
רקע ביטחוני חובה (חברה ביטחונית / משא / רפט / יחידות טכנולוגיות)
אנגלית גבוהה | נכונות לנסיעות לחול המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8482309
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
דרושים באיילת אלבז
Job Type: Full Time
A Defense Technology startup is looking for a
Senior Mechanical Engineer.
Full Time - Sharon area.


Responsibilities -
Design and develop aero-mechanical assemblies for airborne platforms.
Lead the mechanical integration of the platform.
Manage and support development and production through subcontractors.
Lead mechanical projects from requirements definition through customer
delivery.
Oversee testing and Quality Assurance across design and production phases.
Prepare design reviews, assembly instructions, and design verification and
feasibility documentation.
Solve complex engineering challenges under tight schedules and
technological constraints.
Requirements:
BSc. in Mechanical Engineering or Aeronautical Engineering.
5+ years of experience in mechanical design.
Proven experience with mechanical integration and hands-on engineering
work.
Experience designing structures and integrating assemblies for airborne
systems.
Full proficiency in SolidWorks, demonstrated in production-grade designs.
Experience designing for manufacturability using composite, plastic, and
aluminum materials.
Familiarity with New Product Introduction (NPI) methodologies
Experience managing mechanical databases and documentation
Ability to implement best practices for part numbering and configuration
control.
Ability to work effectively in a fast-paced environment with frequent
iterations and changing timelines.
Hebrew, English - Speaking, reading and writing at high level.
Experience in the defense industry - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8498153
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 21 שעות
חברה חסויה
Location: Hod Hasharon
Job Type: Full Time
As an RF System Engineer, you will develop solutions for cutting-edge RFICs in advanced 4G/5G IoT devices. Your responsibilities will include designing and supporting all RF aspects of IoT technologies, from RFIC bring-up and system-level performance evaluation to calibration flows and RF measurement tools. You will collaborate closely with Architecture, Firmware, Software, and Hardware teams, while also providing technical support and resolving customer RF issues.

Responsibilities
Development and implementation of advanced RF calibration processes
Simulation and verification of RF calibrations
Testing and analysis of issues in the mass production of components
Writing requirements for software teams to configure the RF channel to comply with 3GPP standards
Solve problems at system level including complicated RF/PHY/ALGO scenarios
Requirements:
B.Sc. in Electrical/electronics/computer engineering from a recognized university
+3 years experience in communication field, strongly preferred cellular
Knowledge in MATLAB and/or Python
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8496642
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
7 ימים
חברה חסויה
Location: Hod Hasharon
Job Type: Full Time
The ATE Engineer is responsible for working with engineering teams to develop the ATE testing stations. We are seeking a highly experienced ATE Hardware and SW Engineer with a strong background in RF, digital, and system-level testing. This role requires deep hands-on knowledge and the ability to design, develop, and support advanced test equipment for complex electronic systems used in production environments.
What will you do:
Design and develop Automated Test Equipment (ATE) for RF, digital, and mixed-signal products at board and system levels.
Collaborate with R&D and manufacturing teams to define and implement test strategies and solutions.
Analyze and understand system schematics, block diagrams, and interface requirements to create robust and reliable ATE.
Support production lines by troubleshooting test failures and optimizing test processes for yield and throughput improvements
Interface with software and firmware teams to integrate hardware with control and automation systems.
Evaluate and select test instruments, fixtures, and measurement techniques based on product specifications.
Maintain documentation for test systems, including design files, calibration procedures, and troubleshooting guides.
Train technicians and engineers in ATE operations and maintenance.
Requirements:
Bachelors degree in electrical engineering or equivalent. Practical Engineer (PE) with strong, proven experience will also be considered.
5+ years of hands-on experience in ATE development and production line support.
Proven expertise in both RF and digital hardware design and testing.
Solid understanding of system-level architecture and ability to work from schematics and high-level block diagrams.
Strong analytical and problem-solving skills, especially in troubleshooting test setups and product failures.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8488175
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
7 ימים
חברה חסויה
Location: Hod Hasharon
Job Type: Full Time
If youre looking to make an impact, come and join a team developing the next generation of space technology.
Our mission is to revolutionize the way satellites and spacecrafts communicate through deep space, in earth orbit and with ground stations. In addition, we enable advanced and new usages of SAR and RF sensors as well as on board processing of those signals.
Our technology is based on space proven state-of-the-art proprietary ManyCore architecture that enables a completely different approach to the way space communication is done.
We are looking for experienced RF engineer to lead and innovate.
What you will be doing​
Design state-of-the-art space RF frontends.
Own the RF systems design, including specifications, component selection, design implementation and verification.
Lead technical reviews with key stakeholders to analyze system and RF design approaches
Work with cross functional teams to define HW-SW interfaces and manage dependencies
Work closely with System HW and validation engineers to define analog-digital specifications, interfaces calibration, verification, and production processes
Work closely with antenna vendors to define antenna-RF specifications, interfaces, and verification process
Escort the integration and validation process and lead its RF activities
Work closely with spacecraft integrators to prove the design and its interfaces.
Requirements:
RF engineer with 10+ years of experience in wireless communication systems
Strong background in analog to digital and RF design.
Strong hands-on experience with advanced RF testing equipment, debugging, and troubleshooting.
B.Sc./M.SC in Electrical Engineering or equivalent.
Highly motivated, team player driven to achieve high-quality results.
Problem solver
Advantages
Background with mmWaves designs
Background in Signal Processing
Experience with Beamforming, MIMO systems and Antenna Arrays
Background in antenna design
Experience with space system development
Space enthusiast.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8488182
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 21 שעות
חברה חסויה
Location: Hod Hasharon
Job Type: Full Time
On a typical day, you might start by running measurements on a new RFIC, analyze the data, work with designers to interpret results, update automated test scripts, and participate in team discussions to optimize circuit performance.

Responsibilities
Perform RFIC block-level analysis and characterization
Develop automation tools for RF testing and measurements
Analyze measurement data and prepare reports
Collaborate closely with RFIC designers to optimize designs
Conduct hands-on lab work with spectrum analyzers, oscilloscopes, and signal generators
Maintain and improve testing processes and documentation
Support troubleshooting and problem-solving for RFIC projects
Requirements:
B.Sc. in Electrical and Electronics Engineering from a well-known university
0 - 4 years of relevant experience in the RF field.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8496639
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 22 שעות
חברה חסויה
Location: Hod Hasharon
Job Type: Full Time
As a Test and Product Engineer, your day often begins with analyzing production test results and identifying key issues. You might work on refining test programs, developing new hardware for test stations, or troubleshooting anomalies alongside design and manufacturing teams. You will participate in cross-functional meetings, share insights with colleagues, and drive continuous improvements that directly impact product quality, yield, and customer satisfaction.

Responsibilities
Develop, validate, and maintain production test programs for semiconductor devices.
Analyze large volumes of test data, identify trends, and provide actionable insights to design and product teams.
Define and design test hardware for wafer probing and final test stages.
Collaborate with cross-functional teams to debug and resolve product and test issues.
Support new product introduction from initial prototype through mass production.
Ensure test methodologies meet quality, cost, and yield targets.
Document processes, test flows, and improvements to support knowledge sharing and standardization.
Requirements:
B.Sc. or M.Sc. in Electrical Engineering or a related field
2+ years of experience in semiconductor testing, validation, or product engineering
Strong analytical and problem-solving abilities
Excellent communication and teamwork skills
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8496637
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Hod Hasharon
Job Type: Full Time
What will you be doing?
Responsible for advanced technology insight, product planning, system architecture design, chip definition, and product definition. Support in technology roadmap development for next generation computing network related chips definition and architecture design, including Ethernet/RDMA/RoCE switching ASIC, data processing unit and etc.
Lead and execute the research and development of high-performance computing network analyzing and optimizing, including architecture-specific or network-aware architectures to accelerate the computing traffic in high performance computing system.
Propose innovative solutions for next generation architecture of high-performance computing networked system and chiplet interconnecting technology.
Lead the design and subsequent verification and validation of concepts in the team
Work with external R&D Institutes and Universities in developing novel architectures and algorithms for networked system.
Generate novel ideas and protect them with IPR fillings
Mentor and coach less experienced staff members.
Requirements:
What do we want to see?
A B.Sc degree or above in the field of computer science, electrical and electronic engineering or in a similar background in Research & Development, PhD is an advantage
Profound R&D experience in the field of high-performance computing, networked system and ASIC chips for network
Good theoretical understanding in at least one of the following: computer architecture, distributed system and application algorithms, memory systems and network protocols as well as operating system kernels, micro-architecture of ASIC chips, large scale network and computing bus network stacks.
Proven experience with new technology development initiatives and innovation as well as publications in reputed journals - Advantage
High level of self-reliance and an autonomous target-oriented work style, can do attitude, eager to learn new things and ready to think outside the box
Occasional travel related to ongoing projects, seminars, conferences etc.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8483456
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Hod Hasharon and Haifa
Job Type: Full Time
We are currently looking for a Performance Simulation Expert develop and evaluate next generation performance features as well as develop the future generation of our Compute system simulation infrastructure, models and analysis tools.
Requirements:
MSc or BSc in computer science/EE or area related to computer architecture, or equivalent research experience in industry
At least 7 years of relevant research and development experience in industry and academia in the following areas:
Computer architectures: instruction set architecture, microarchitecture, cache sub-system, memory sub-system, NOC, interconnect
Workload characterization and analytical model generation
System Modelling and emulation of HW.
Simulation of Software workloads and Software applications on HW simulator
Ability to provide innovation and global vision throughout the company
Excellent communication, presentation and reporting skills
Experience working with highly technical teams and communicating to non-technical partners.
Excellent oral and written English.
Responsibilities:
Develop and analyze performance and power features in our cycle accurate pre-silicon model and improve the accuracy of the current Server system simulator
Design the architecture of the new generation system simulation platform that will be used to analyze performance of Server (Compute and AI) workloads and identify performance bottlenecks
Develop new technologies, methodologies and tools for simulation. Analysis and debug of applications and workload on Huawei servers
Propose and simulate optimizations and innovations on the HW and SW in order to improve server performance for given workloads
Distribute the simulation platform, train and support other teams in China and in Europe using the simulation platform, technology and methodology.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8483430
סגור
שירות זה פתוח ללקוחות VIP בלבד