רובוט
היי א אי
stars

תגידו שלום לתפקיד הבא שלכם

לראשונה בישראל:
המלצות מבוססות AI שישפרו
את הסיכוי שלך למצוא עבודה

מהנדס חשמל

arrow
מסמך
מילות מפתח בקורות חיים
סימן שאלה
שאלות הכנה לראיון עבודה
עדכון משתמש
מבחני קבלה לתפקיד
שרת
שכר
משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP

חברות מובילות
כל החברות
כל המידע למציאת עבודה
להשיב נכון: "ספר לי על עצמך"
שימו בכיס וצאו לראיון: התשובה המושלמת לשאלה שמצ...
קרא עוד >
קריירה בקאמבק : איך לחזור ובגדול
עזבתם מקום עבודה? שיניתם כיוון מקצועי? לפעמים ש...
קרא עוד >
כיצד להתבלט בישיבות עבודה?
נצלו את הפאנל המקצועי ודחפו את עצמכם קדימה – הפ...
קרא עוד >
לימודים
עומדים לרשותכם
מיין לפי: מיין לפי:
הכי חדש
הכי מתאים
הכי קרוב
טוען
סגור
לפי איזה ישוב תרצה שנמיין את התוצאות?
Geo Location Icon

משרות בלוח החם
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
מיקום המשרה: הוד השרון
סוג משרה: משרה מלאה
לחברה המובילה בתחום עבודות החשמל באזור המרכז והשרון, דרוש/ה מהנדס/ת או הנדסאי/ת/ לתפקיד מנהל/ת פרויקטים בתחום החשמל,להצטרפות לצוות מקצועי ודינמי.

אנו מחפשים איש/אשת מקצוע אחראי/ת, מקצועי/ת ובעל/ת מוטיבציה גבוהה ויכולת הובלה, לניהול פרויקטים שמעוניין/ת להצטרף לצוות איכותי ולסביבת עבודה יציבה, מאתגרת ומספקת.

תחומי אחריות במסגרת התפקיד:
תיאום והתנהלות מול גורמים מקצועיים פנימיים וחיצוניים.
פיקוח על ביצוע עבודה בשטח ועמידה בסטנדרטים מקצועיים ובטיחותיים ללא פשרות.
הכנת חשבונות ובקרה שוטפת על התקדמות הפרויקט.
התנהלות שוטפת למול יועצים ומפקחים.

היקף משרה ותנאים:

משרה מלאה
תנאים טובים למתאימים, כולל סביבת עבודה מקצועית ותומכת
דרישות:
רישיון חשמלאי בתוקף (ראשי, הנדסאי, מהנדס)- חובה.
ניסיון קודם בביצוע עבודות חשמל - חובה.
אחריות אישית גבוהה ומוסר עבודה סדר ודיוק בפרטים גבוה - חובה.
יכולת עבודה עצמאית ובצוות כאחד. - חובה.
פרויקטים מורכבים בתחום חשמל ציבורי. - חובה
כישורי תקשורת גבוהים - חובה.
יחסי אנוש טובים ונכונות לעבודה במוסדות ציבוריים חובה.
תוכנות OFFICE, בינארית, דקל, רמדור - יתרון.
- המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8720051
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
דרושים בהמימד השלישי
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
התקנה וטיפול שוטף במערכות דימות באתרים קליניים ומחקריים
מתן שירות טכני לתחזוקה ולתקינות המכשירים בכל רחבי הארץ
בקרות תקופתיות, השתלטות מרחוק/ הגעה לאתר ואבחון וטיפול בתקלות
תחקור תקלות ומציאת פתרונות אפקטיבים בטווח זמן קצר
הסתייעות על פי הצורך במרכז התמיכה בחו"ל
כתיבת דו"חות טיפול מיידים ומפורטים
אחריות מקצועית ותקציבית להזמנות חלקי חילוף והחזרתם
שעות עבודה משתנות בהתאם לצרכי הלקוח, לעיתים שעות עבודה ארוכות, כוננויות במהלך כל ימות השנה (שבוע בחודש)
אחריות לשביעות רצון הלקוחות בתחום האחריות (רופאים, הנדסה רפואית, טכנאים)
ביצוע עדכוני בטיחות בהתאם להנחיות היצרן ומשרד הבריאות
ביצוע בדיקות איכות על פי תקן יצרן
סיוע טלפוני ללקוחות
הכשרות בחו"ל (אירופה או ארה"ב, בין שבוע לחמישה שבועות בשנה לקורס)
דרישות:
השכלה: מהנדס- חובה
הנדסת אלקטרוניקה או מכונות
יכולת קריאת שרטוטים חשמליים ואלקטרוניים- חובה
לניסיון קודם בתחום המדיקל- יתרון משמעותי. במקביל, תתבצע הכשרה מלאה בארץ ובחו"ל
נכונות ומחוייבות לעבוד במתכונת כוננויות: כולל סופי שבוע וחגים
יצירתיות ויכולת לפתור בעיות לצד יכולת עבודה מתודית ועל פי נהלים
יכולת עבודה בצוות
מסוגלות לעבודה תחת תנאי לחץ
יחסי אנוש מעולים
יכולת למידה עצמאית
נכונות לנסיעות לחו"ל
עמידה בזמנים ואחריות
רישיון רכב מסוג B
שפות: עברית, אנגלית - ברמה גבוהה - חובה המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8714959
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
דרושים בקבוצת אלקטרה
מיקום המשרה: מספר מקומות
מחפש/ת תפקיד שמשלב תכנון, חשיבה הנדסית ועבודה על פרויקטים משמעותיים?
זו ההזדמנות להשתלב בעולם טכנולוגי מתקדם ולהוביל תכנון מערכות מורכבות ומתקדמות!

תיאור התפקיד:
תכנון מערכות חשמל ופיקוד למעליות בפרויקטים חדשים ובפרויקטי שיפוץ
הכנת תכניות חשמל, תרשימי פיקוד ותיעוד טכני
התאמת תכנון חשמלי לדרישות הפרויקט, התקנים וצרכי הלקוח
ליווי מקצועי של הפרויקטים משלב התכנון ועד שלב המסירה
מתן פתרונות ותמיכה הנדסית לבעיות שעולות במהלך ההתקנה בשטח
התפקיד משלב עבודה על מערכות מורכבות ומתקדמות, עם השפעה על איכות ובטיחות המתקנים.
העבודה במשרה מלאה: ימים ראשון עד חמישי בין 07.30-16.45 מראשון לציון. התפקיד משלב יציאה לשטח.
מה אנחנו מציעים:
מתנות החגים והטבות בעובדי חברה.
אירועי חברה וימי גיבוש
הכשרות וקורסים על חשבון החברה

לידיעתך, בהגשת המועמדות למשרה, קו"ח והמידע האישי אודותייך יועברו לחברת אלקטרה בע"מ, אשר תנהל אותם בהתאם ובכפוף למדיניות הפרטיות שלה הזמינה באתר הקריירה של קבוצת אלקטרה
דרישות:
הנדסאי/ת או מהנדס/ת חשמל - חובה
ניסיון בתכנון מערכות חשמל / פיקוד ובקרה - 2-3 שנות ניסיון
יכולת קריאה והכנת שרטוטים ותכניות חשמל
שליטה בתוכנות שרטוט ותכנון 
אנגלית ברמה גבוה  מאוד - ברמת כתיבה ודיבור
ניסיון בתחום המעליות - יתרון המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8718764
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
מיקום המשרה: עפולה
סוג משרה: משרה מלאה
התפקיד כולל:
אחריות להובלת נושאי האיכות של מוצרים בקווי הייצור השונים
בניה ויישום תכניות איכות ביצוע מבדקים פנימיים, וליווי מבדקי איכות חיצוניים,
דיווחי איכות ברמה יומית/ שבועית/חודשית/רבעונית
שיפור מתמיד של תהליכי היצור להגדלת תנובת קו היצור
טיפול בבעיות איכות משלב החומר ועד אספקת המוצרים
הובלת והנחיית צוות מבקרי תהליך
ביצוע תחקירים ופעולות מתקנות
ידע בנושא חיווט - ייתרון
עבודה בתחום הצבאי בטחוני - ייתרון
דרישות:
הנדסאי/ת / מהנדס/ת מכונות / אלקטרוניקה / איכות תעו"נ
הכרת טכנולוגיות ייצור והרכבה של כרטיסים ומכלולים בתחומי האלקטרוניקה
רקע קודם בתחומי ניהול הנדסי ו/או בתפקיד תומך תהליכי ייצור / טכנולוגיות
ניסיון בניהול איכות בתחומי ייצור מוצרים אלקטרוניים
הכרת תקנים בתחום האיכות
עבודה בסביבה ממוחשבת
ידע בפריורטי - יתרון
ידע בשפה אנגלית - יתרון המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8720379
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 6 שעות
דרושים בטאלנטס השמת עובדים - אורית סגל
מיקום המשרה: מספר מקומות
סוג משרה: בכירים ומשרה מלאה
מנהל /ת פרויקטים-חשמל,מיזוא, תעשיה, תחנות כח
ניסיון מוכח בהובלת פרויקטי הקמה ושדרוג
מערכות חשמל מתח גבוה HV מתח בינוני MV ומתח נמוך LV כולל תחנות משנה GIS AIS לוחות ראשיים גנרטורים טרנספורמטורים ומערכות הגנה ובקרה.
ניהול פרויקטים מקצה לקצה החל משלב התכנון ההנדסי דרך רכש קבלנים וביצוע ועד מסירה חיבור לרשת והפעלה
הובלת פרויקטים מקצה לקצה מתכנון ראשוני ועד למסירה

ניהול צוותי פרויקט מרובי דיסציפלינות: חשמל, מערכות, הנדסה ותפעול

עבודה ישירה מול לקוחות גלובליים, עמידה בתקני איכות ובטיחות מחמירים

אחריות מלאה על תקציבים, לוחות זמנים, רגולציה וסטנדרטים בינלאומיים

ניהול שוטף של קבלני משנה, ספקים ויועצים בארץ ובחו"ל

הובלת חדשנות והטמעת טכנולוגיות מתקדמות
דרישות:
דרישות:

תואר ראשון בהנדסה: חשמל / אזרחית / מכונות או רלוונטית אחרת חובה

ניסיון של לפחות3 שנים בניהול פרויקטי? מערכות


אנגלית ברמה טובה המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8685247
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
מיקום המשרה: ירושלים
סוג משרה: משרה מלאה
לחברה מובילה בתחומה בירושלים, דרוש/ה הנדסאי/ת או מהנדס/ת חשמל עם ידע וניסיון בתכנון.

העבודה במשרה מלאה.
תנאים טובים למתאים /ה!
דרישות:
- תעודת מהנדס/ת או הנדסאי/ת  חשמל - חובה
- ניסיון בתכנון
- ניסיון בתכנון תשתיות- יתרון
- שליטה בתוכנת אוטוקאד
- המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8692412
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
דרושים בהטכניון - מכון טכנולוגי לישראל
מיקום המשרה: חיפה
סוג משרה: משרה חלקית
מהנדס/ת בסדנה למכניקה ואלקטרוניקה בפקולטה לרפואה של הטכניון:
תכנון, פיתוח, בנייה ותחזוקה של ציוד מכני ואלקטרוני עבור מעבדות מחקר
פיתוח הנדסי של אביזרים מכניים ואלקטרונים לממשקי מיקרוסקופיה, מערכות אופטיות, ומערכות התנהגותיות
הדפסה תלת ממדית, תפעול cnc, ושימוש בכרטיסי בקרה כדוגמת ארדואינו
דרישות:
מהנדס/ת / הנדסאי/ת בתחומי חשמל, מכניקה או מיקרואלקטרוניקה.
ניסיון קודם בתכנון, פיתוח, בנייה ותחזוקה של ציוד מכני ואלקטרוני עבור מעבדות.
יכולת בין אישית טובה בעבודת צוות ומול חוקרים מתחומים שונים.
תודעת שירות גבוהה.


הערות: המשרה הינה בהיקף 50%.
* המשרה מיועדת לנשים ולגברים כאחד.
המידע שיימסר על ידך ישמש את הטכניון – מכון טכנולוגי לישראל ו/או מי מטעמו, לצורך בחינת מועמדותך למשרה, לרבות מועמדות למשרות נוספות, וכן לצורך ניהול ותפעול הליכי הגיוס, ולמטרות נוספות בהתאם להודעת הפרטיות למועמדים למשרה בטכניון.
לא חלה עליך חובה חוקית למסור את המידע, אולם אם תבחר/י שלא למסור את המידע, כולו או חלקו, ייתכן שלא ניתן יהיה לבחון את מועמדותך או את התאמתך למשרה.
למידע נוסף, לרבות פירוט סוגי המידע הנאספים והשימושים הנעשים בו, זהות הגורמים שאליהם עשוי המידע להימסר, אופן מימוש זכויותיך לעיון ולתיקון מידע אישי, ודרכי יצירת קשר – ניתן לעיין בהודעת הפרטיות למועמדים למשרה, כפי שמפורסמת באתר הטכניון.

הטכניון פועל לגיוון תעסוקתי ומעודד הגשת מועמדויות מכלל המגזרים
التخنيون يعمل على تعددية التشغيل ويشجع التقديم للمناقصات من جميع الأوساط
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8702808
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
דרושים באלביט מערכות
Location: Haifa
Job Type: Full Time
We are looking for
Elbit Systems Aerospace Division in Haifa is looking for an EMC Engineer to join the Airborne Products Group
In this role, you will take part in developing advanced airborne systems operating in demanding electromagnetic environments and contribute to products that support critical defense missions. You will work in a multidisciplinary environment, influence system architecture, and play a key role in ensuring compliance with stringent military and aviation standards
Requirements:
B.Sc. in Electrical Engineering
Experience in EMC engineering
Experience in development of EMI/RFI filters and PCB-level protection design - Advantage
Experience supporting PCB layout and reviewing board designs - Advantage
Experience in airborne engineering activities - Advantage
Experience with CST simulation software - Advantage
In-depth familiarity with relevant hardware components such as capacitors, inductors, transient voltage suppressors and protection devices
High level of English reading and writing skills
Experience in writing technical documents and presentations in English
Ability to work independently

*Only relevant applications will be answered
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8714147
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
סוג משרה: משרה מלאה
לחברה מובילה בתחום המצברים, חלק מ  SUNLIGHT GROUP חברה בינלאומית הפועלת בשווקים בינלאומיים ומובילה פתרונות אגירת  אנרגיה ברחבי העולם,
ומבוססת היטב בתחום הצומח של אגירת האנרגיה בישראל דרוש מנהל מכירות לפתרונות אגירת האנרגיה שמשווקת החברה.

מה התפקיד כולל?: איתור הזדמנויות עסקיות חדשות וגיוס לקוחות חדשים, הגדרת הצורך של הלקוח והתאמת הפתרון האופטימלי עבורו. עבודה מול ספקים בינלאומיים,
וחשיפה לטכנולוגיות המתקדמות ביותר בתחום.

-למה כדאי לעבוד אצלנו?
שכר בסיס מתגמל + מודל עמלות ובונוסים
תנאים סוציאליים טובים, וסביבת עבודה דינמית ומשפחתית.
רכב צמוד
דרישות:
דרישות התפקיד

*ניסיון במכירות בתחום הרלוונטי
*השכלה: מהנדס / הנדסאי חשמל
*תכונות אופי: נחישות, אסרטיביות, רצון ללמוד תחום מתפתח, מקצועיות, אחריות, יכולת *עבודה תחת לחץ ויחסי אנוש מעולים.
*שפות: אנגלית ברמה גבוהה (לשיחה והתכתבות) חובה.
*אוריינטציה טכנולוגית: שליטה מלאה ביישומי Office, אקסל
* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8714407
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
סוג משרה: משרה מלאה
בהתאם לסעיף 41 לצו המועצות המקומיות (נוהל קבלת עובדים לעבודה), תשל"ז- 1976 המועצה המקומית התעשייתית נאות חובב, מכריזה בזה על משרה פנויה כדלקמן:
תואר המשרה: מילוי מקום חשמלאי מיכשור ובקרה היקף משרה: 100% דירוג השכר: דרוג/דרגה בהתאם להסכם הקיבוצי במועצה. מקום העבודה: מועצה מקומית תעשייתית נאות חובב כפיפות: מנהל מחלקת אחזקת תשתיות.
כללי:
אחראי לשליטה, תפעול ובקרת מערך החשמל, התקשורת והמערכות במועצה.

*תיאור התפקיד ותחומי אחריות:
1.אחראי לתקינות ובטיחות מערכת החשמל והתקשורת במועצה.
2.אחראי לעדכניות תוכניות החשמל והתקשורת במועצה.
3.ביצוע אחזקה מונעת ואחזקת שכר.
4.תאום ופיקוח עבודות אחזקה במועצה וליווי פרויקטים מקצועיים (חברת חשמל, חברות שירות, יצרנים וכו').
5.שליטה במלאי כלי עבודה, ציוד וחלקי חילוף.
דרישות:
1.השכלה - השכלה תיכונית + בעל תעודת חשמלאי מוסמך מטעם משרד העבודה והרווחה.
2.ניסיון מקצועי - ניסיון כחשמלאי מוסמך במשך שנתיים לפחות.
3.מהנדס / הנדסאי חשמל - יתרון.
4.בוגר קורס מתח גבוה - יתרון.
5.בוגר קורס בקרים מתוכנתים - יתרון.
6.בעל ידע באבחון תקלות בבקרים מתוכנתים וסיוע בפתרונן - יתרון.
7.בוגר קורס התייעלות אנרגטית / שימור אנרגיה - יתרון.
8.ניסיון בעבודה במפעלים תעשייתיים כימיים - יתרון.

כישורים אישיים:
מיומנות טכנית ותפיסה מכנית, יכולת ארגון וכושר התמדה, יכולת השתלבות בעבודת צוות, אמינות ומהימנות אישית.

דרישות תפקיד מיוחדות:
העבודה מתבצעת לעיתים בשטח ציבורי ברחבי נאות-חובב ובמתקני המועצה, נדרש מאמץ פיזי לפעולות בודדות, נכונות לעבודה בשעות לא שגרתיות (בהתאם לצורך), זמינות לתקלות24/7.
-העמידה בתנאי הסף תיבחן בהתאם לאסמכתאות בלבד.
-בכל מקום בו מפורט תיאור התפקיד בלשון זכר הכוונה היא גם ללשון נקבה, הזדמנות שווה ניתנת לאישה ולגבר בעלי הכישורים להתמודדות על אותה משרה.
-בהתאם להוראות שוויון זכויות לאנשים עם מוגבלות, תינתן העדפה למועמדים עם מוגבלות אם המועמד/ת כשיר/ה לביצוע התפקיד.
-הרשות המקומית פועלת לקדם העסקה מגוונת ומכילה לכלל האוכלוסיות בחברה הישראלית ללא הבדל דת, רקע
ומגדר בהתאם לתקנות העיריות - תינתן עדיפות למועמדך המשתייך לאוכלוסייה הזכאית לייצוג הולם למול המועמדים בעלי כישורים דומים.
-ועדת הבחינה רשאית להחליט על הפניית המועמדים למבחני התאמה לתפקיד.
-המועצה תהא רשאית שלא לטפל ולא להביא לדיון בפני ועדת הבחינה הצעות של מועמדים שהתקבלו ללא פרטים ו/או המסמכים הנדרשים ו/או לאחר המועד הנקוד לעיל.

* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8708213
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
תיאור:
לתפקיד דינמי שכולל הדרכה טכנית מגוונת על מערכות בטחוניות בארץ ובעולם.

תיאור התפקיד:
כתיבה והדרכה בדרג א וב של מערכות ללקוחות בארץ ובעולם.
העברת קורסים באנגלית, הכנת חומרי הדרכה טכניים והובלת תהליכי למידה מול לקוחות בינלאומיים.
- שילוב עבודה מרתק עם נסיעות לחו"ל והדרכות בינלאומיות!
דרישות:
דרישות:
- הנדסאי אלקטרוניקה (מהנדס - יתרון)
- ניסיון בהדרכת מערכות טכנולוגיות.
- הכרה של המערכות: אויוניקה, ל"א, תקשורת, בק"ש, בק"צ.
- אנגלית ברמה גבוהה מאוד - חובה
- יכולת לימוד עצמי, סקרנות וחריצות המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8707381
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
חברה חסויה
מיקום המשרה: פתח תקווה
סוג משרה: משרה מלאה
בפ"ת, לחברה מובילה בתחום האוטומציה התעשייתית, דרוש /ה מהנדס/ת בקרה לתחום בקרת מבנים.

הובלת פרויקטים ותכנון מערכות בקרה, תמיכת לקוחות, עבודה מול ממשקי פנים וחוץ.
דרישות:
מהנדס/ת / הנדסאי/ת חשמל

ניסיון של שנה לפחות בתחום בקרת מבנים

ניסיון קודם בתכנות בקרים מתוכנתים (Siemens) ומערכות HMI.

* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8712472
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 6 שעות
דרושים בReady
מיקום המשרה: יהוד מונוסון ופתח תקווה
סוג משרה: משרה מלאה
- בדיקות עבור מערכות Real Time Embedded
- ניתוח תוצאות בדיקות וכתיבת מסמכי בדיקות
- עבודה מול סימולטורים, אוטומציה וחומרה
דרישות:
- תואר ראשון בהנדסת חשמל ואלקטרוניקה / מדעי המחשב
- לפחות 5 שנות ניסיון בפיתוח בדיקות למערכות Real Time Embedded
- ניסיון בעבודה עם סימולטורים וצבד"ים
- ניסיון בכתיבת מסמכי בדיקות STP, STD, STR
- ניסיון בעבודה עם חומרה וקריאת שרטוטים
- אנגלית ברמה גבוהה
- היכרות עם Python - יתרון המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8720277
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
דרושים באיתוראן
מיקום המשרה: טירת כרמל
סוג משרה: משרה מלאה
דרוש/ה מהנדס/ת board design
דרישות:
מהנדס/ת אלקטרוניקה, ניסיון של 10 שנים.
ניסיון בעריכת מעגלים
ניסיון בתקנים EMC, נסיון שיקולי תכנון עמידות ב EMC (עדיף בתחום הרכב)
שליטה OrCAD, spice, office
תכנונים RF Power, DC/DC, analog, Audio, MCU, SPI, I2C,
נסיון LTE MODEM, GNSS
אנגלית כתיבה/קריאה/דיבור טובה מאוד
נכונות לנסיעות לחו"ל (לא הרבה)
משקיע, אסרטיבי, ראש גדול, תקשורתי, לעבודה בצוות (כולל צוות חו"ל)
נסיון להוביל מוצר משלבים התחלתים של איפיון, לפיתוח, ועד והעברה לייצור, והעברת המוצר תקנים.

**נא לציין מקום מגורים וצפי שכר.
* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8492395
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
דרושים בארבל הנדסת חשמל בע"מ
סוג משרה: משרה מלאה
לחברה העוסקת באחזקת מערכות חשמל בתעשייה דרוש /ה מהנדס /ת הנדסאי/ת חשמל ומנהל /ת פרויקטים לניהול מחלקת אחזקה בחברה.
 
התפקיד כולל:
- ניהול פרויקטים מגוונים במתח גבוה/ נמוך.
- ניהול צוותי חשמלאים.
- ניהול קשרי לקוחות
- ניהול וריכוז חשבונות


משרה מלאה.
דרישות:
- מהנדס /ת חשמל/ הנדסאי/ת - חובה
- רישיון מהנדס חשמל / מסויג למתח גבוה - יתרון
- ניסיון מוכח בתחום החשמל- 5 שנים לפחות.
- יכולת קריאת תוכניות חשמל, הבנה מעמיקה של חוק החשמל ותקנותיו.
- שליטה בתוכנת אופיס ובינארית.
- ניסיון ורקע בתחום המתח הגבוה - יתרון
- ניסיון בניהול עובדים- יתרון משמעותי
- המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8717099
סגור
שירות זה פתוח ללקוחות VIP בלבד
לוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required SOC Quality and Reliability Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
In this role, youll work to shape the future of AI/ML hardware acceleration. You will have an opportunity to drive TPU (Tensor Processing Unit) technology that powers our most demanding AI/ML applications. Youll be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our TPU. You'll contribute to the innovation behind products loved by millions worldwide, and leverage your design and verification expertise to verify complex digital designs, with a specific focus on TPU architecture and its integration within AI/ML-driven systems.
Our data centers are the most advanced in the world. In this role, you will help build the state-of-the-art SoCs that power these data centers by driving quality and reliability processes from the Integrated Circuit perspective. You will have an opportunity to create silicon and follow it into the field and back to drive improvements for the next-generations of chips.
You will have an understanding of Integrated Circuit (IC) flows, wafer processing, testing, qualification, yield, reliability, and failure analysis is expected. You will work with various cross-functional teams to develop quality and reliability specifications, develop and deploy design guidelines, and develop and execute and test plans. You will collaborate with global hardware quality and reliability teams, silicon design, validation and engineering teams.The AI and Infrastructure team is redefining whats possible.
Responsibilities
Lead the strategic definition and development of Design-for-Reliability (DfR) guidelines, collaborating with cross-functional subject matter experts to integrate reliability into early design stages.
Establish and direct the development of qualification hardware and test methodologies, managing internal teams and external vendors to ensure silicon and package verification.
Execute comprehensive silicon and package qualification programs (including high-temperature operating life (HTOL), early life failure rate (ELFR), electrostatic discharge and latch-up (ESD/LU), and biased highly accelerated stress test (b/HAST)) and conduct in-depth failure analysis to resolve quality issues.
Analyze data from qualification programs, high-volume manufacturing, and field returns to identify failure mechanisms and trends for yield and reliability optimization.
Develop and implement physics-based statistical quality and reliability models (e.g., early life failure (ELF), time-dependent dielectric breakdown (TDDB), or negative bias temperature instability (NBTI)) to predict device failure mechanisms and lifetime behaviors.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Materials Science, Physics, or a related field or equivalent practical experience.
4 years of experience in Integrated Circuit (IC) silicon quality or reliability.
Experience leading the product reliability life-cycle from post-tapeout through high-volume manufacturing.
Experience with semiconductor complementary metal-oxide-semiconductor (CMOS) technology, device physics, and failure mechanisms.
Preferred qualifications:
Master's degree in Electrical Engineering, Materials Science, or related field.
Expertise in statistical data analysis using tools such as JMP, Python, or JMP Scripting Language (JSL).
Familiarity with electrical failure analysis (EFA) and physical failure analysis (PFA) techniques.
Knowledge of design-for-reliability (DfR) rules and implementation techniques.
Track record with silicon reliability on process nodes and advanced packaging technologies.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717555
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Junior SoC DFT Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Haifa, Israel; Tel Aviv, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a System on a Chip (SoC) Design for Testing (DFT) Engineer, you will be responsible for defining, implementing and deploying advanced DFT methodologies for highly digital or mixed-signal chips or IPs. You will define silicon test strategies, DFT architecture, and create DFT specifications for a CPU. You will design, insert and verify the DFT logic.You will prepare for post silicon and co-work/debug with test engineers. You will be responsible for reducing test cost, increasing production quality and enhancing yield.
Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of our platforms, we make our product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.
Responsibilities
Develop DFT strategy and architecture (e.g., hierarchical DFT, Memory Built-In Self Test (MBIST), Automatic Test Pattern Generation (ATPG).
Complete all Test Design Rule Checks (TDRC) and design changes to fix TDRC violations to achieve high-test quality.
Insert DFT logic, boundary scan, scan chains, DFT Compression, Logic BIST, TAP controller, clock control block, and other DFT IP blocks.
Insert and hook up MBIST logic including test collar around memories, MBIST controllers, eFuse logic, and connect to core and TAP interfaces.
Document DFT architecture, test sequences, and boot-up sequences associated with test pins.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, a related field, or equivalent practical experience.
1 year of experience with Design For Test (DFT) methodologies, DFT verification, and industry-standard DFT tools.
Preferred qualifications:
Master's degree in Electrical Engineering, or a related field.
Experience in fault modeling.
Experience in IP integration (e.g., Memories, Test Controllers, Test Access Point (TAP), and Memory Built-In Self Test (MBIST)).
Experience working with ATE engineers (e.g., silicon bring-up, patterns generation, debug, validation on automatic test equipment, debug of silicon issues).
Experience in SoC cycles, including silicon bring-up and silicon debug activities.
Experience with ASIC DFT synthesis, simulation, and verification flow.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717546
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Test Generator Technical Lead, Hardware, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
You will have the opportunity to find the perfect blend of software design practices and hardware development complexity. As a Test Generator Technical Leader, you will lead the technical development and methodology of advanced pseudo-random test generators and verification tools for our custom silicon (ASIC/SoC). You will work at the intersection of hardware and software, driving the strategy for stimuli generation, constraint-solving, and test automation to ensure the functional correctness of next-generation chips. Your strength is primarily in software coding with a good understanding of hardware, or if you are a hardware engineer with software proficiency, this balanced role will let you shine in both disciplines at the same time.Our mission is to organize the world's information and make it universally accessible and useful. Our team combines the best of AI, Software, and Hardware to create radically helpful experiences. We research, design, and develop new technologies and hardware to make computing faster, seamless, and more powerful. We aim to make people's lives better through technology.
Responsibilities
Lead the technical design, architecture, and implementation of high-performance test generators and verification frameworks (e.g., using C++, Python, SystemVerilog, or Universal Verification Methodology (UVM).
Propose, design and implement software automation that directly addresses bottlenecks in today's ASIC and SoC Electronic Design Automation (EDA) flow, specifically targeting pseudo-random stimuli generation and constraint-solving methodology.
Collaborate directly with the hardware team on projects to prototype and then deploy scalable test generator tools to make a positive impact on our chip hardware development process.
Participate in, or lead design reviews with peers and stakeholders to decide amongst available technologies for advanced verification.
Triage product or system issues and debug/track/resolve by analyzing the sources of issues and the impact on hardware, simulation performance, or service operations and quality.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
8 years of experience with software development in one or more programming languages with experience in data structures and algorithms.
Experience in hardware verification, building developer tools, or developing test generators/exercisers for ASICs and SoCs.
Experience testing, maintaining, or launching software/hardware products.
Experience with software design and architecture, including leading technical projects.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering, or Computer Science, with an emphasis on computer architecture.
Experience with high-performance, systems, and debugging.
Experience with Hardware Verification languages and methodologies (e.g., SystemVerilog, UVM).
Experience in chip design and related EDA tools and flows (e.g., VCS, Xcelium, debugging complex hardware-software interactions).
Deep understanding of object-oriented programming, constraint solvers, and software design architecture.
Software skills and design practices, with the ability to bridge the gap between software engineering and hardware verification disciplines.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717544
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required CPU Emulation Technical Lead, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next-generation of hardware experiences, delivering unparalleled performance, efficiency, and integration. Our mission is to organize the world's information and make it universally accessible and useful. Our team combines the best of AI, Software, and Hardware to create radically helpful experiences. We research, design, and develop new technologies and hardware to make computing faster, seamless, and more powerful. We aim to make people's lives better through technology.
Responsibilities
Define the emulation strategy, identify platforms and technologies to support all customers.
Explore emulation methodologies, gather feedback from customers, and implement emulation workflows at scale.
Support emulation customers with debugging hardware, software, tooling, and project-specific issues.
Create tooling and automation to support emulation tools, licensing, and job management in our infrastructure.
Act as a primary interface to emulation vendors.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
8 years of experience working with emulation languages such as C, C++ and scripting such as Python and chip design flow.
Experience in leading an emulation team/project.
Experience in leading technical teams and building cross-functional relationships.
Experience with emulation systems (e.g., ZeBu Server, Palladium, Veloce), compilation, debug, performance and methodology enhancements.
Experience with various emulation technologies (Transactors, In-circuit Emulation, Hybrid), flows (Assertions, Coverage, UPF, Power), Debugging and Performance of compile and runtime environments.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering, or Computer Science, with an emphasis on computer architecture.
Experience with hardware verification concepts and tools (e.g., simulation, coverage, assertions, CPU Arch, SoC, fabric, networking).
Experience with Field-programmable Gate Array (FPGA) systems (e.g., EP, HAPS, Protium).
Experience with verification techniques, and full verification life-cycle.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717542
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Emulation Hardware Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of our platforms, we make our product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.
Responsibilities
Maintain and upgrade emulation models and infrastructure and act as a primary interface to emulation vendors.
Explore emulation methodologies, gather feedback from the team and customers, and implement emulation workflows and methodologies.
Create tooling and automation to support emulation Electronic design automation (EDA) tools, licensing, and job management in our infrastructure.
Support emulation team members with debugging hardware, tooling, and project-specific issues.
Help to bring up external interfaces (e.g., DDR, Peripheral Component Interconnect Express (PCIe), Ethernet, etc.) on the emulation platforms and create standalone test cases for tool issues encountered in the emulation compile and runtime flows.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
4 years of experience with emulation systems (e.g., ZeBu Server, Palladium, Veloce), compilation, debug, performance and methodology enhancements.
Experience with coding and scripting in C, C++, Perl, TCL, or Python.
Experience with associated EDA tools, automation, and flow enhancements.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering, or Computer Science, with an emphasis on computer architecture.
Experience with hardware verification concepts and tools (e.g., simulation, coverage, assertions, CPU Arch, SoC, fabric, networking).
Experience with FPGA systems (e.g., EP, HAPS, Protium).
Experience with hybrid emulation or speed bridges.
Experience with coding in Verilog/SystemVerilog for design.
Experience with design debug tools (e.g., Verdi, Verisium).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717540
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo
Job Type: Full Time
Required Software Engineer, CPU Performance Modeling, Cloud
About the job
Our software engineers develop the next-generation technologies that change how billions of users connect, explore, and interact with information and one another. Our products need to handle information at massive scale, and extend well beyond web search. We're looking for engineers who bring fresh ideas from all areas, including information retrieval, distributed computing, large-scale system design, networking and data storage, security, artificial intelligence, natural language processing, UI design and mobile; the list goes on and is growing every day. As a software engineer, you will work on a specific project critical to our needs with opportunities to switch teams and projects as you and our fast-paced business grow and evolve. We need our engineers to be versatile, display leadership qualities and be enthusiastic to take on new problems across the full-stack as we continue to push technology forward.
In this role, you will work with System teams and the CPU Architecture team to develop an understanding of the Central Processing Unit (CPU), System on a Chip (SoC), performance metrics, benchmarks/measuring tools, and available optimization knobs. You will define methods and technologies to model CPU performance at different accuracy levels by supporting architectural explorations and decision making. You will correlate performance projections with measured post-silicon data.
Responsibilities
Write product or system development code.
Design, develop, test, deploy, maintain, and improve Central Processing Unit (CPU) software modeling and other software tools.
Manage project priorities, deadlines, and deliverables.
Collaborate with hardware and software CPU Architecture teams, SoC performance modeling team, and other Software teams.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
2 years of experience with software development in C++ programming language or 1 year of experience with an advanced degree.
Preferred qualifications:
Masters degree or PhD in Engineering, Computer Science, or a related technical field.
2 years of experience with data structures and algorithms.
Experience in modern CPU/Machine Learning (ML) architecture and micro-architecture.
Ability to learn coding languages.
Excellent object-oriented database design and SQL skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717539
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Design Verification Engineer, Networking, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a Senior Design Verification Engineer, you will be a part of Research and Development team to verify digital designs, develop constrained-random test environments and drive system testing to closure. You will collaborate with design and verification teams, manage the verification life-cycle and uncover bugs through corner-case testing.
Responsibilities
Plan and execute the verification of digital design blocks by understanding specifications and working with design engineers to define key verification scenarios.
Develop and refine random verification environments using SystemVerilog/UVM or Specman to ensure effective test coverage.
Define and implement various coverage measures to capture stimulus and corner-case scenarios.
Collaborate with design engineers to debug tests and ensure functional correctness of design blocks.
Drive coverage analysis to identify verification gaps and demonstrate progress towards tape-out.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering or equivalent practical experience.
8 years of experience verifying digital logic at Register-Transfer Level (RTL) using SystemVerilog or Specman/E for Field Programmable Gate Arrays (FPGAs) or Application-specific integrated circuit (ASICs).
Experience with Central Processing Unit (CPU ) implementation, assembly language, or compute System on a Chip (SOC).
Experience verifying digital systems using standard IP components/interconnects (e.g., microprocessor cores, hierarchical memory subsystems).
Experience creating and using verification components and environments in standard verification methodology.
Preferred qualifications:
Masters degree in Electrical Engineering or Computer Science.
2 years of experience verifying digital logic at Register-Transfer Level (RTL) using SystemVerilog or Specman/E for Field Programmable Gate Arrays (FPGAs) or Application-specific integrated circuit (ASICs).
Experience with UVM, SystemVerilog, or other scripting languages (e.g., Python, Perl, Shell, Bash, etc.).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717537
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior CPU Design Verification Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will work as part of a Research and Development team. You will build verification components, constrained-random testing, and system testing, and drive verification closure. You will verify digital designs, collaborate closely with design and verification engineers on projects, and perform direct verification. You will build constrained-random verification environments that exercise designs through their corner-cases and expose all types of bugs. You will manage the full life-cycle of verification, which can range from verification planning and test execution to collecting and closing coverage.
Responsibilities
Plan the verification of digital design blocks by fully understanding the design specification and interacting with design engineers to identify important verification scenarios.
Create and enhance constrained-random verification environments using SystemVerilog and UVM, or formally verify designs with SystemVerilog Assertions (SVA) and industry leading formal tools.
Identify and write all types of coverage measures for corner-cases.
Debug tests with design engineers to deliver functionally correct design blocks.
Close coverage measures to identify verification holes and to show progress towards tape-out.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering or equivalent practical experience.
8 years of experience with creating and using verification components and environments in standard verification methodology.
Experience verifying digital logic at RTL level using SystemVerilog or Specman/E for FPGAs or ASICs.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, or a related field.
3 years of experience creating and using verification components and environments in standard verification methodology.
Experience with verification techniques, and the full verification life cycle.
Experience with performance verification of ASICs and ASIC components.
Experience with Application-Specific Integrated Circuit (ASIC) standard interfaces and memory system architecture.
Knowledge of CPU/Processor architectures (e.g., pipeline, cache, memory subsystem, instruction sets, exceptions) like ARM, X86 or RISC-V, is highly beneficial for verifying processor cores or IP blocks.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717535
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Silicon DFT Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will play a crucial role in Design for Testing (DFT) Architecture and DFT design, and support devices of extreme complexity to production. You will be responsible for providing technical leadership in DFT, developing flows, automation, and methodology, planning DFT activities, tracking the DFT quality matrix throughout the project life-cycle, and providing sign-off DFT to tapeout.
Responsibilities
Lead and execute activities in the design, implementation, and verification of DFT solutions for large-scale ASICs.
Develop DFT strategy and architecture, including hierarchical DFT, Memory Built-In Self Test (MBIST), and Automatic Test Pattern Generation (ATPG).
Work with other Engineering teams (e.g., Design, Verification, Physical Design) to ensure that DFT requirements are met and mutual dependencies are managed.
Manage the DFT team's workload and deliverables, provide technical leadership and guidance to the team.
Lead DFT execution of a silicon project (e.g., planning, execution, tracking, quality, and signoff).
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field, or equivalent practical experience.
8 years of experience in Automatic Test Pattern Generation (ATPG) methods.
Experience with multiple projects in DFT design and verification, DFT specification, definition, architecture, and insertion.
Experience with DFT techniques and tools, ASIC DFT synthesis, simulation, and verification flow.
Experience in leading DFT activities throughout an ASIC development flow.
Preferred qualifications:
Master's degree in Electrical Engineering or a related field.
Experience in JTAG and iJTAG protocols and architectures.
Experience in post-silicon test or product engineering.
Experience in SoC cycles, silicon bring-up, and silicon debug activities.
Knowledge of fault modeling techniques.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717533
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Staff DSP Design Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As the architect for high-speed data paths, you will define the roadmap for scaling interconnect speeds. You will evaluate and select key technologies such as Co-Packaged Optics (CPO), advanced modulation formats, and new Forward Error Correction (FEC) methods to support future Artificial Intelligence (AI) computing clusters.
Responsibilities
Identify the "limits of physics" for current Digital Signal Processing (DSP) architectures and pivot the team toward next-generation solutions, such as Machine Learning (ML)-based equalization or optical-specific DSP.
Define the requirements for DSP test chips to validate new architectures in advanced nodes before they hit production.
Drive the long-term power-reduction roadmap, ensuring our interconnects do not become the thermal bottleneck.
Represent us in the Optical Internetworking Forum (OIF) and Institute of Electrical and Electronics Engineers (IEEE) standards, ensuring our hyperscale requirements for latency and power are reflected in global specifications.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, a related technical field, or equivalent practical experience.
12 years of experience in Silicon Architecture, Mixed-Signal DSP, Communication Theory, or Systems Engineering.
Experience defining architectural specifications for high-bandwidth interconnects.
Experience with silicon development from initial concept through to high-volume production (Graphic Design System II (GDSII) to market).
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering, or a related technical field.
Experience representing organizations in industry standards bodies (e.g., IEEE, OIF, PCIe-SIG, or CXL).
Understanding of advanced low power DSP implementation.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717532
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Design Vision Lead, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next-generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next-generation of our platforms, we make our product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.
Responsibilities
Demonstrate technical involvement throughout the entire Intellectual Property (IP) development cycle, ensuring seamless integration into System-on-Chip (SoC).
Perform RTL development (e.g., coding and debug in SystemVerilog), function/performance simulation debug, and Lint/CDC/FV/UPF checks.
Collaborate closely with software, verification, emulation, physical design, packaging, and silicon validation stakeholders to ensure that designs are complete, correct, and performant.
Lead an edge AI IP design team across definition, implementation and deployment phases, while establishing IP development methodologies sharing unified blocks within the IP design team.
Author block-level design documents such as interface protocol, block diagram, transaction flow, pipeline, and more.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering or equivalent practical experience.
15 years of experience with design from microarchitecture through implementation with Verilog/SystemVerilog language.
10 years of experience in managing teams and groups.
Experience in microarchitecture, design, verification, logic synthesis, and timing closure.
Experience working with system design principles for low latency, high throughput, security, and reliability.
Experience with chip design flow, chip architecture, design methodologies, physical design, and verification processes.
Preferred qualifications:
Master's degree or PhD in Engineering or equivalent practical experience.
Experience in micro-architecture and design of AI modules, optimizing their power, performance and area.
Experience in leading chip development projects and teams and execution.
Ability to motivate and focus on collaborative teams to achieve testing goals.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717523
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required CPU Design Verification Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will work as part of a Research and Development team. You will build verification components, constrained-random testing, and system testing, and drive verification closure. You will verify digital designs, collaborate closely with design and verification engineers on projects, and perform direct verification. You will build constrained-random verification environments that exercise designs through their corner-cases and expose all types of bugs. You will manage the full life-cycle of verification, which can range from verification planning and test execution to collecting and closing coverage.
Responsibilities
Plan the verification of digital design blocks by fully understanding the design specification and interacting with design engineers to identify important verification scenarios.
Create and enhance constrained-random verification environments using SystemVerilog and Universal Verification Methodology (UVM), or formally verify designs with SystemVerilog Assertions (SVA) and industry leading formal tools.
Identify and write all types of coverage measures for corner-cases.
Debug tests with design engineers to deliver functionally correct design blocks.
Close coverage measures to identify verification holes and to show progress towards tape-out.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering or equivalent practical experience.
4 years of experience with creating and using verification components and environments in standard verification methodology.
Experience verifying digital logic at RTL level using SystemVerilog or Specman/E for FPGAs or ASICs.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, or a related field.
3 years of experience creating and using verification components and environments in standard verification methodology.
Experience with Application-Specific Integrated Circuit (ASIC) standard interfaces and memory system architecture.
Experience with verification techniques, and the full verification life cycle.
Experience with performance verification of ASICs and ASIC components.
Knowledge of CPU/Processor architectures (e.g., pipeline, cache, memory subsystem, instruction sets, exceptions) like ARM, X86 or RISC-V, for verifying processor cores or IP blocks.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717519
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior SoC and IP Design Engineer, Cloud
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Haifa, Israel; Tel Aviv, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
Responsibilities
Define the block-level design document (e.g., interface protocol, block diagram, transaction flow, pipeline, etc.).
Perform Register-Transfer Level (RTL) coding (coding and debug in Verilog, SystemVerilog), function/performance simulation debug, and Lint/CDC/FV/UPF checks.
Participate in synthesis, timing/power closure activities.
Participate in test plan and coverage analysis of the block and SoC-level verification.
Communicate and work with multi-disciplined and multi-site teams.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
8 years of experience with digital logic design principles, RTL design concepts, and languages, such as Verilog or SystemVerilog.
Experience with logic synthesis techniques to optimize RTL code, performance and power, as well as low-power design techniques.
Experience with design sign-off and quality tools (e.g., Lint , CDC , etc.).
Experience with SoC or IP architecture.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering, Computer Science, or a related field.
Knowledge of high-performance and low-power design techniques, assertion-based formal verification, Field-programmable Gate Array (FPGA) and emulation platforms, and SoC architecture.
Knowledge in one of the following areas such as Double Data Rate (DDR)/Low Power Double Data Rate (LPDDR), High-bandwidth memory (HBM).
Excellent problem-solving and debugging skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717515
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Silicon Physical Design Engineer
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a SoC Physical Design Engineer, you will collaborate with functional design, Design for Testing (DFT), architecture, and packaging engineers. In this role, you will solve technical problems with innovative micro-architecture and practical logic circuits solutions, while evaluating design options with optimized performance, power, and area in mind.
Responsibilities
Use problem-solving and simulation techniques to ensure performance, power, and area (PPA) are within defined requirements.
Collaborate with cross-functional teams to debug failures or performance shortfalls and meet program goals in lab or simulation.
Design chips, chip-subsystems, or partitions within subsystems from synthesis through place and route, and sign off convergence, ensuring that the design meets the architecture goals of power, performance, and area.
Develop, validate, and improve Electronic Design Automation (EDA) methodology for a specialized sign off or implementation domain to enable cross-functional teams to build and deliver blocks that are correct by construction and ease convergence efforts.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
5 years of experience with System on a Chip (SoC) cycles.
Experience with advanced design, including clock/voltage domain crossing, DFT, and low power designs.
Experience in high-performance, high-frequency, and low-power designs.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering or Computer Science, with an emphasis on computer architecture.
Experience with scripting languages such as Perl, Python, or Tcl.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717512
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Silicon Validation and Automation Engineer
Note: By applying to this position you will have an opportunity to share your preferred working location from the following: Tel Aviv, Israel; Haifa, Israel.
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
Responsibilities
Run, monitor, and analyze nightly Continuous Integration (CI) regression results.
Design and implement new regression methods and supporting infrastructure/Graphical User Interface (GUI).
Identify, debug, and report issues while performing initial root cause analysis and routing to IP owners.
Develop and maintain tools for silicon validation and debug.
Maintain and enhance automation infrastructure for various regression cadences.
Requirements:
Minimum qualifications:
Bachelors degree in Electrical Engineering, Computer Engineering, Physics, a related field, or equivalent practical experience.
1 year of experience in post-silicon validation, SoC debug, or a similar role.
Experience with Continuous Integration (CI) systems and regression management.
Experience with lab equipment and platform bring-up.
Experience in scripting languages such as Python for test automation, tool development, and data analysis.
Preferred qualifications:
Experience developing software tools, including command-line interfaces and graphical user interfaces (GUIs).
Experience with version control systems (e.g., Git).
Experience with silicon screening or characterization processes.
Familiarity with various Linux distributions and embedded environments like NERF, OVSS, EDK2, etc.
Understanding of computer architecture, SoC design, and IP interfaces.
Ability to debug hardware/software issues and perform root cause analysis in a silicon environment.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8717509
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות שנמחקו