לוח משרות דרושים מהנדס חשמל בחיפה וסביבתה

Were looking for a Physical Design Expert to join the growing Physical Design Team, responsible for developing our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

Our EyeQ Platform Group (EPG) is seeking a motivated Formal Verification Engineer to join our team and contribute to development of hardware verification environments.
This position offers an opportunity to apply formal methods to verify the correctness of various complex digital systems.
This is an exciting opportunity to join a team of talented engineers, working cutting edge technologies in the field of autonomous vehicle.
What will your job look like:
Be the owner of formal verification environment from first draft to sign-off stage
Apply formal methods to verify the correctness of various complex digital systems
Work with HW architects\designers to define assumptions, rules and cover properties
Help define the formal verification methodology and environment to be applied by the team
Explore new Formal methods and Tools
Work with tools like Cadence JasperGold, Verisium manager, Xcelium, Indago
Analyze verification results, identify bugs, and collaborate with engineers to resolve design issues
Develop generic formal blocks\functions of commonly used logic, to be later used off the shelf.

Our Unit Level Verification Team in Haifa is looking for an experienced verification engineer to be involved in the development of our future AI and deep learning HW accelerators.
This is an exciting opportunity to join a team of highly talented engineers, working on the most cutting-edge technologies to deliver our EyeQ future chips, aimed to power the worlds first fully Autonomous Vehicle!
What will your job look like?
Define, implement and enhance verification environments using UVM methodology.
Write and debug tests that combine UVM methodology and SW code.
Identify and write various types of coverage measures.
Collaborate with designers, architects, and SW developers from Haifa and Jerusalem teams to deliver the most comprehensive verification environment.
Integrate Industry Standard (such as AXI and OCP) and other 3rd party VIPs.

Required Experienced SoC Verification Engineer
Which department will you join?
The SOC verification group owns the important and challenging job of verifying our chip. It is involved from product specification to final SOC delivery, and involves all the system components. The group is made up of few of the best verification engineers, so besides contributing to making our roads safer, youll get the chance to work at one of the most professional verification teams.
What will your job look like:
You'll be responsible for Pre-Silicon system-level verification of the most cutting-edge AI accelerators and technologies in the automotive field.
Define the TestPlan, develop and run tests on simulation/emulation environments, develop test environment and verification collaterals.
You'll have a broad effect on our unique product from the very beginning of the process.

Our Automated Driving group in Haifa is looking for an experienced SoC Design Engineer for DFT team.
This is an exciting opportunity to join a team of highly talented engineers, working on one of the most cutting edge technologies - Autonomous Vehicle (AV) SoC.
At our Automated Driving group, we know that the idea of a fully autonomous car is no longer science fiction, but a reality that we are creating!
We have spent more than 15 years developing the world's most Advanced Driver Assistance Systems (ADAS) and we are now leading the computer vision and machine learning domain, reaching fully automated driving experience (AV).
What will your job look like:
You'll be responsible of architecture of the DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary HW / FW / SW for the different modules
Verify and Validate our design
Debug and analyze coverage and yield loss
As a cutting edge technology company, we are working only with the very advanced DFT tools and features, while developing our own methods and DFT concepts as it required by the Automotive and Safety related products market (ISO26262).

Required Experienced RFIC/Analog CAD Engineer
The RFIC/Analog design groups in our Radar organization is responsible for developing the cutting edge Transceivers in mmW frequencies for the best Imaging Radar technology. The design process includes the entire process from specs to productization.
To support these challenging processes, we need a skilled CAD team that will work with the design teams on all design aspects and flows from design environment setups, through design tools implementations and support and to chip level verifications and validation enablement.
We're looking for an Experienced CAD or Design Automation Engineer to develop our RF/Analog design tools/flows and automation flows for the next-generation Imaging Radar chips.
What will your job look like:
Build and support RF/analog design environments
Implement, develop, and maintain design flows, tools and scripts.
Evaluate and explore new automation technologies and advocate for efficiency improvements
Evaluate multiple vendor solutions and guide execution, in the most optimal use, based on design needs
Effectively communicate and support a large number of designers, providing high-quality tools and flows, documentation, and presentations

Required Experienced Physical Design Engineer
The EyeC VLSI team designs chips for RADAR systems used in ADAS and autonomous vehicles. Our Physical Design team operates in a startup-like environment, emphasizing technical expertise, execution, and ownership. Each engineer in the Physical Design team takes full responsibility for their work, from initial definition through execution and final sign-offs. Engineers collaborate closely with design and architecture teams to develop constraints, conduct design reviews, and implement RTL modifications to ensure convergence.
We are seeking an Experienced Backend to join our growing Physical Design team. In this role, you will play a key part in the design of state-of-the-art SoCs, from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

Required Experienced Logic Design Engineer
The EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

We are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.

Our Autonomous Driving group in Haifa is looking for an Electrical Validation & Embedded SW Engineer. This is an exciting opportunity to join a growing team of highly talented engineers, working on the worlds most advanced SoCs for ADAS and self-driving vehicles.
Electrical Validation engineers enable, debug, and validate high-speed interfaces - like LPDDR4/5, PCIe Gen4/5, and CDPHY - using high-end Lab measurement equipment and advanced SW tools. This dynamic work environment requires interfacing with Silicon and hardware design engineers, Software developers, Signal Integrity, and System Validation teams. The proximity to Signal/Power integrity simulation activities - we are a single SI/EV team - is another powerful advantage, enabling joint simulation-measurement effort.
What will your job look like:
You will join a relatively small team of talented and experienced EV/SI/PI engineers with wide scope of responsibility, from Pre-Si SI/PI simulations to Post-Si Electrical validation and debug, covering all the high-speed analog interfaces of our EyeQ products.
Responsibilities include performing electrical spec compliance and system margin validation, interface optimization, statistical results analysis, validation flow definitions, and automation, etc.
You will also deal with FW development, automation enabling, data post-processing and debug of high-speed interfaces, like LPDDR4/5, PCIe Gen4/5, and D/C/MPHY.

the team that invented one of the technologies at the heart of 5G. Their next vision was to develop an IoT sticker, a computing element that can power itself by harvesting radio frequency energy, bringing connectivity and intelligence to everyday products and packaging, things previously disconnect from the IoT. This revolutionary mixture of cloud and semiconductor technology is being used by some of the worlds largest consumer, retail, food and pharmaceutical companies to change the way we make, distribute, sell, use and recycle products.
Our investors include Softbank, Amazon, Alibaba, Verizon, NTT DoCoMo, Qualcomm and PepsiCo.

looking for a talented and experienced engineer to take part in the verification efforts for the companys core product. This position involves building and maintaining a complex verification environment, and defining and executing a test plan. In this role, you will be leading all aspects of verification and will have a critical impact on the company's R&D path.

Responsibilities
Lead the full verification lifecycle and methodologies. Plan, Design and Execute verification of SV/UVM Block level and Full chip environments , creating and execution test plans, tracking progress, and ensuring verification closure across diverse Mix-signals SoC simulation using Verilog, MATLAB, HW/SW Co-simulation and lab integration.
Work closely with Digital Design, Analog Design, Software, Back-end, SW and System teams to understand the functional, power and performance goals of the product and ensure its quality.

We are seeking for Platform Integration Engineer to own the development, testing, and monitoring of the manufacturing health of our Graviton server products. You will be part of a team integrating new silicon, hardware, firmware, and software into a revolutionary system architecture.

Key job responsibilities:
Lead product integration from definition phase through mass production, including: Hardware-Firmware integration and validation, development and implementation of manufacturing test flows, system validation and qualification and production readiness verification.
Define and implement screening test content for both production line and data-center environments.
Drive continuous improvement of operational health monitoring and debugging capabilities.
Collaborate with cross-functional teams to resolve integration and production issues.
Implement test flows for improving product operational health at manufacturing sites.
Integrate knowledge and data from customers and data sources for fast resolution of operational issues.
Maintain quality documentation and collateral in order to improve manufacturing operations.
Travel to manufacturing sites as needed (approximately 3-4 times per year, 1 week duration per trip) to support integration, validation, and operational improvements.

We are looking for excellent electrical engineering graduates to join our talented Chip Design group developing Amazons next generation products for the cloud market. This is a unique opportunity where you will be be able to learn from our technical experts and team leaders about architecture definition, logic design, verification, chip bring-up and more.
In this role you will impact and see the device through its entire lifecycle from definition stage to mass production and to our datacenters.