לוח משרות דרושים חשמל ואלקטרוניקה, לחיפוש זה נמצאו 834 משרות

Our Sat Connect IC business unit, a division of our Satellite Systems business is a leading provider of ASICs, software, multibeam electronically steered antennas, and complete systems for communication satellites, as well as ground and airborne terminals. Located in Israel, the UK, Bulgaria, and the US, we are a techno logy leader in satellite communication.

Job Description:

Be part of a dynamic and motivated modem VLSI design team. Take part in a complex SOC VLSI chip-design activities with major focus on advanced digital signal processing and modem subsystem development, covering architectural, front-end design, verification and physical-design aspects.

VLSI development of digital modules from concept to final implementation, meeting physical design entry requirements
Be part of a multi-team developing advanced signal processing cores and subsystem solution
In charge of adjusting, deploying and integrating the subsystem into company design environment

Our Sat Connect IC business unit, a division of our Satellite Systems business is a leading provider of ASICs, software, multibeam electronically steered antennas, and complete systems for communication satellites, as well as ground and airborne terminals. Located in Israel, the UK, Bulgaria, and the US, we are a techno logy leader in satellite communication.

Responsibilities

System validation activity includes Phy, HW and SW validation
Study system architecture and system requirements and take part in a test plan to address these requirements in collaboration with system engineering and other teams
Define and write automatic test plans and test procedures for new systems and features
Build test setups for fully automated regression as well as for manual tests
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems
Record, investigate and analyze defects
Investigation of root cause of test case failures and providing corrective action in conjunction with development teams
Support Test Management tools and continuous integration methodologies
Data analysis and post processing of data collected
Compilation of regular Test execution summary report with metrics

Be part of a dynamic and motivated multi-national Physical Design team, taking part in developing a state-of-the-art Satellite SoC through the full life cycle: design to production. The chips include complex digital and analog modules. Some of the products are part of the next generation radiation hardened satellite modems. You will have access to best-in-class EDA design tools and will be working in leading edge process technologies.

Responsibilities

Physical implementation of complex SoC, VLSI devices and Test Chips, integrating custom designs and 3rd party IP (Hard, Soft, IO, CPUs, DSPs, etc)
Full block level timing closure and manufacturing checks signoff including power planning and analysis
Working alongside the Logic Design RTL team to develop timing constraints for implementation at block and chip level
Insertion of DFT test structures and chip level integration, capture and simulation
Jointly with management, build your career development and growth opportunities.

Laser Systems Engineer (Maternity Leave Replacement)
We are looking for Elbit Systems in Rehovot is looking for a Laser Systems Engineer (Maternity Leave Replacement). Join a meaningful role focused on leading and supporting system integration processes for advanced electro-optical systems incorporating high-power lasers. This position offers the opportunity to work at the forefront of technology within a leading defense organization, with direct impact on the development of complex multidisciplinary systems. In this role you will Lead and define system integration processes for advanced electro-optical systems Work independently in the laboratory environment, including execution of system tests and experiments Lead multidisciplinary teams and collaborate with multiple interfaces Write and maintain technical and system documentation Work in a dynamic technological environment with challenging project timelines Requirements B.Sc. or M.Sc. degree in Physics, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, or Systems Engineering At least 3 years of experience in systems engineering or development of complex multidisciplinary systems, or alternatively an advanced degree - Advantage Experience in development of electro-optical systems - Advantage Experience and familiarity with lasers - Advantage Experience working with high-power lasers - Advantage High level of technical English Strong system-level understanding, deep technical orientation, leadership abilities, and excellent collaboration skills
*Only relevant applications will be answered #Rehovot

We are looking for a highly hands-on Practical Electronics Engineer to join our Manufacturing Engineering team.
The role focuses on developing and maintaining manufacturing test equipment and jigs, troubleshooting electronic and multidisciplinary systems, supporting production and NPI activities, and improving manufacturing processes throughout the product lifecycle.
Responsibilities:
Design, build, validate, and maintain electronic test jigs, fixtures, programming stations, and manufacturing test equipment.
Troubleshoot electronic assemblies, cables, test equipment, and production failures, and support root-cause analysis and corrective actions.
Define test methods, procedures, and acceptance criteria for assemblies and sub-systems.
Prepare wiring instructions, cable drawings, schematics, and technical documentation for production and training.
Support product development, prototype builds, NPI, production ramp-up, and mass production.
Provide DFM/DFT feedback and support system integration, verification, and production testing.
Collaborate with R&D, mechanical, software, quality, operations, production teams, and external suppliers.
Improve product and process quality by enhancing test coverage, equipment reliability, manufacturing processes, and key production KPIs.

We are looking for a Senior Electronics Practical Engineer to join our R&D team and play a key role in bringing our BeeHome robotic hive systems from development to mass production.
This is a highly hands-on role, working closely with mechanical, software, NPI, QA, and operations teams on integration, debugging, and production readiness of complex electromechanical systems.
What You'll Do:
Integrate electronic systems into robotic machines, including embedded boards, motion, communication, and power systems
Debug and troubleshoot analog and digital boards at component and system levels
Design, document, and support cable harnesses for production (schematics, pinouts, routing, labeling)
Lead design transfer to manufacturing, including BOMs, documentation, and ongoing production support
Design and build test setups, fixtures, and validation tools for development and production
Support existing board designs and new product revisions
Work closely with subcontractors, manufacturers, and assembly partners
Perform root-cause analysis on production and field failures and drive corrective actions
Collaborate with R&D, mechanical, software, QA, and operations teams throughout the product lifecycle

As an Ethernet Validation Engineer, you'll own the validation strategy for high-speed Ethernet (400G/800G+) on our next-generation ASICs, ensuring they perform flawlessly before reaching millions of customers.

In this role you will set the validation strategy for HS-Ethernet, ensure the design worked well, and drive complex system debugs involving HW, FW and SW components. You will provide leadership, by driving the teams around you to raise the bar and deliver higher quality products on behalf of Amazon customers. You will set high standards for yourself and everyone you work with, and will be constantly looking for ways to improve the performance, quality, cost and reliability of AWS products and services. We are transforming an industry, and we are looking for individuals who are ready for this challenge and want to reach beyond what is possible today.

Key job responsibilities
- Own new products validation strategies for high-speed Ethernet interfaces and leading their execution.
- Support ongoing validation and integration of new products.
- Provide Annapurna Labs ASIC design, SW development, QA and architecture teams information and requirements from validation perspectives.

We are looking for talented engineers to join the Pre-silicon Verification team and help us technically lead the challenges of the next decade, developing a semiconductor platform based on revolutionary architecture, and taking part in the development of cutting-edge products within a disruptive system architecture.

Youll have the opportunity to work on the technologies that power the worlds largest cloud provider, in a dynamic, open, and fast-paced environment.

BIRD Aerosystems is seeking a Senior Systems Engineer for our System of Systems project, focused on developing innovative aerospace solutions. You will lead systems integration efforts and ensure seamless functionality across various systems. Responsibilities:
* Own the systems engineering of a complex System of Systems (SoS), maintaining the overall system-level view across multiple interconnected systems and subsystems.
* Translate operational and customer needs into system architecture, clear and verifiable requirements, and system and interface specifications.
* Define and manage interfaces and cross-system dependencies across radar, electro-optic, software and hardware teams.
* Lead system integration, verification and validation activities, including system-level troubleshooting and resolution of technical issues, and participate in field integration and test campaigns (ground and live-fire test events).
* Identify system risks, interface gaps and integration challenges early, and drive technical solutions with the relevant engineering teams.
* Participate in and contribute to system design reviews (SRR, PDR, CDR) and technical trade-off studies from a System of Systems perspective.
* Serve as the technical focal point for system-level and cross-system topics, working closely with multidisciplinary engineering teams and reporting key progress, risks and decisions to the Head of Systems Engineering.

Key job responsibilities
* Daily involvement in all aspects of physical design chip development (RTL2GDS), including floorplanning, synthesis, clock tree synthesis, place and route, static timing analysis, power and noise analysis, physical verification testing, and equivalence checks.
* Being actively engaged in design-backend convergence aspects and defining timing constraints.
* Taking full end-to-end responsibility for the physical design of macros and clusters level, according to specifications, under challenging constraints, with focus on optimizing power, area, and performance.
* Participation in the development of design flows, using a variety of EDA tools and vendors such as Synopsis and Cadence.
* Engaged in defining implementation and signoff methodologies.

DRS RADA Technologies , a leading defense company developing and manufacturing life-saving radar systems, is looking for an MRO Operator to join our site in Beit She’an. Job Description:
* Perform functional testing of electronic boards using both manual and automated testing methods, utilizing advanced test equipment such as a multimeter, spectrum analyzer, and signal generator.
* Work with computerized systems to analyze test results, troubleshoot failures, and identify faults in accordance with strict procedures and quality standards.
* Analyze and repair electronic boards with complex failures.
* Identify faults and work with electronic schematics and circuits down to the component level.
* Full-time position: Sunday–Thursday, 08:00–17:00, with overtime and Friday work as required.