רובוט
היי א אי
stars

תגידו שלום לתפקיד הבא שלכם

לראשונה בישראל:
המלצות מבוססות AI שישפרו
את הסיכוי שלך למצוא עבודה

מהנדס חשמל

מסמך
מילות מפתח בקורות חיים
סימן שאלה
שאלות הכנה לראיון עבודה
עדכון משתמש
מבחני קבלה לתפקיד
משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP

חברות מובילות
כל החברות
כל המידע למציאת עבודה
כל מה שרציתם לדעת על מבחני המיון ולא העזתם לשאול
זומנתם למבחני מיון ואין לכם מושג לקראת מה אתם ה...
קרא עוד >
לא מסתדרים עם הקולגות שלכם בעבודה?
תקשורת שעובדת בשבילך תמשיך לעבוד בשבילך לא רק ב...
קרא עוד >
טעויות נפוצות בניהול קריירה
הדרך לחיים של חוויות והזדמנויות עוברת דרך תכנון...
קרא עוד >
לימודים
עומדים לרשותכם
מיין לפי: מיין לפי:
הכי חדש
הכי מתאים
הכי קרוב
טוען
סגור
לפי איזה ישוב תרצה שנמיין את התוצאות?
Geo Location Icon

משרות בלוח החם
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 49 דקות
טרנס אלקטריק פרו בע"מ
דרושים בטרנס אלקטריק פרו בע"מ
לחברת טראנס אלקטריק חברה מובילה בתחום הפצה רכיבים האלקטרו מכניים ופתרונות ייצור דרוש/ה איש מכירות שטח/מנהל תיק לקוחות.

התפקיד כולל:
-ניהול תיק לקוחות קיים-טיפוח והגדלת הפעילות.
-איתור לקוחות חדשים וניהול תהליכי מכירה מלאים, ניהול מו"מ מסחרי וחוזי.
-ניתוח צרכי שוק יצרני ציוד אלקטרו מכניקה ומערכות בישראל ומתן פתרונות ייצור באמצעות החברה.
-יצירת קשרים מסחריים וטכניים חדשים.

*עבודת שטח ובמשרדי הנהלת החברה במרכז הארץ.
דרישות:
ניסיון במכירות בתחום הרכיבים- חובה!
ידע וניסיון טכני בתחום האלקטרו מכניקה - חובה.
בוגר הנדסה - יתרון.
ניסיון עסקי ומכירות בשווקים הרלוונטיים - חובה.
היכרות וניסיון עבודה בשוק יצרני האלקטרו מכניקה בארץ תוך הכרת חברות בתחום צבאי, רפואי, יצרני מכונית וחברות תקשורת.
הכרות עם ספקים פוטנציאליים בתחום רכיבי האלקטרו מכניקה ופתרונות ייצור.
אנגלית ברמה גבוהה (דיבור וכתיבה) - חובה.
* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8296290
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 1 שעות
קבוצת אלקטרה
דרושים בקבוצת אלקטרה
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
מחפש/ת את האתגר הבא בעולם האחזקה??
קבוצת אלקטרה מגייסת חשמלאי/ת בכיר/ה למנורה מבטחים ברמת גן באלקטרה FM

תיאור התפקיד:
תחזוקה ותפעול מערכות החשמל ניהול ותחזוקה שוטפת של מערכות החשמל כולל: מערכות מתח גבוה ומתח נמוך, לוחות חשמל, שנאים, מערכות אל פסק ומערכות גיבוי, גנרטורים ומערכות חירום.
פיקוח ובקרה ביצוע בדיקות תקופתיות של מערכות חשמל בהתאם לדרישות החוק והתקנים הרגולטוריים. בקרה על תקינות מערכות הקריטיות.
חלוקת משימות ותיעדוף פעולות, פיקוח על ביצוע העבודות תוך שמירה על סטנדרטים גבוהים, ביצוע סקרי סיכונים לעובדים וקבלנים.
תיאום עם ספקים וקבלנים חיצוניים, כולל פיקוח וליווי בעבודתם.
עמידה ברגולציה ותקנים שמירה על עמידה בתקני חשמל, כיבוי אש ודרישות הבטיחות.

מיקום- רמת גן
ימים א-ה לפי המשמרות הבאות:
משמרת בוקר מוקדמת  15:30 6:30
משמרת בוקר רגילה 16:30 7:30
משמרת ערב:18:00 9:00
שישי 1 לחודש 12:30 7:30
דרישות:
דרישות התפקיד:
רישיון חשמל ראשי ומעלה- חובה
ניסיון ניהולי בתחום האחזקה- יתרון
ידע וניסיון במערכות בקרת מבנה, פיקוד ובקרה
זמינות במידת הצורך גם בסופש ובחגים
מה אנחנו מציעים:
הזדמנות להשתלב בחברה מובילה במשק
קרן השתלמות מידית 
תנאים טובים המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8211640
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 3 שעות
קונטאל
דרושים בקונטאל
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
לחברת קונטאל אוטומציה ובקרה העוסקת בין השאר בתכנון והקמה של מתקנים תעשייתיים ופרויקטים תשתיתיים בתעשייה דרוש/ה מתכנן מיכשור ובקרה

תיאור התפקיד:
תכנון מערכות מכשור ובקרה כולל הכנת תזרימי P&ID, כתיבת מפרטים טכניים ובחירת ציוד.
אפיון מערכות בקרה מבוססות PLC / DCS.
עבודה מול לקוחות, ספקים וקבלני משנה.
השתתפות בסיורי שטח, פיקוח הנדסי וליווי הקמה.
דרישות:
תואר ראשון בהנדסת חשמל/מכונות/כימיה או הנדסאי בתחומים רלוונטיים חובה.
ניסיון קודם של לפחות שנתיים בתכנון מכשור ובקרה יתרון משמעותי.
ידע בקריאת שרטוטים טכניים, הכנת מסמכי הנדסה, וסביבת AutoCAD.
אנגלית ברמה גבוהה קריאה וכתיבה של חומר טכני.
יחסי אנוש טובים ויכולת עבודה בצוות.
מיקום המשרה: גמיש
היקף משרה: משרה מלאה
* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8328938
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 4 שעות
חד ייעוץ שירותי כח אדם והשמה
דרושים בחד ייעוץ שירותי כח אדם והשמה
סוג משרה: משרה מלאה
1. לחברה תשתיות בתחום החשמל דרוש/ה מנהל /ת פרויקטים לדרום 1175 למרכז 3227
ניהול כולל של פרויקטים בתחום החשמל תכנון, ביצוע, פיקוח וסגירה.
תיאום בין כלל הגורמים המעורבים בפרויקט: לקוחות, קבלנים, יועצים וספקים.
עמידה ביעדים תקציביים ובלוחות זמנים.
ניהול סיכונים, פתרון בעיות בשטח והובלת צוותי עבודה.
דיווח שוטף להנהלה ולקבלן הראשי.
דרישות:
מהנדס/ת או הנדסאי/ת חשמל חובה.
ניסיון של לפחות 5 שנים בניהול פרויקטים בתחום החשמל.
רישיון חשמלאי מהנדס יתרון משמעותי.
הבנה מעמיקה בתשתיות חשמל, מערכות מתח גבוה ונמוך, מערכות בקרה ואוטומציה.
ניסיון בעבודה מול רשויות, תקנים ורגולציות.
שליטה בתוכנות Office (בדגש על Excel)
ניסיון עם תוכנות ניהול פרויקטים MS Project- יתרון.
ידע בתוכנות שרטוט (AutoCAD)- יתרון.

המשרות מיועדות לנשים ולגברים כאחד. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8304801
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 5 שעות
Alljobs Match
דרושים בAlljobs Match
סוג משרה: משרה מלאה
- איתור ואבחון תקלות חשמל במתח גבוה ונמוך
- ניהול והפעלה של צוותים בשטח
- עבודה שוטפת מול קבלני משנה, ספקים, מוסדות ציבוריים וגופים ביטחוניים
- ניהול פרויקטים בשטח ברחבי הארץ
משרה מלאה א'-ה' כולל כוננויות והקפצות (24/7)
התפקיד כולל רכב צמוד +אש"ל

תנאים נוספים:
-הכשרות מקצועיות וקורסים על חשבון החברה
-ימי גיבוש, אירועי חברה וימי כיף
-מתנות בחגים ובימי הולדת
-סביבת עבודה משפחתית ומקדמת
דרישות:
- מהנדס/ת חשמל בעל/ת רישיון - חובה
- ניסיון בביצוע פרויקטים במתח גבוה -יתרון משמעותי
- נכונות לעבודה בשטח ולניהול צוותים המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8306377
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
סוג משרה: משרה מלאה
לחברה בנייה מובילה דרוש/ה בקר/ית איכות מערכות חשמל
דרישות:
- הנדסאי/ת / מהנדס חשמל-חובה. בעל/ת ניסיון בניהול פרויקטים/בקרה של מערכות חשמל, עדיפות בתחום הבניה
- נכונות למשרה מלאה.
- נכונות להתנידות בין אתרי החברה באזור המרכז,דרום, צפון.
* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8327063
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 7 שעות
דרושים במורן שמעוני - שירותי HR, גיוס וחיבורי קרירה
סוג משרה: בכירים ומשרה מלאה
תנאים נוספים:רכב צמוד, קרן השתלמות
ניהול פרויקט בשלבי ביצוע על כלל שלבי הפרויקט
ניהול לוחות זמנים, חריגים ותקציבים
ניהול מנהלי עבודה וקבלני משנה
פתרון בעיות טכניות בשטח ועבודה מול ספקים

*שליחת קורות החיים מהווה את הסכמתך להכללת פרטיך במערכת הגיוס שלנו, בהתאם למדיניות הגנת הפרטיות.
ניתן לפנות אלינו בכל עת ולבקש הסרה מהמאגר.
דרישות:
הנדסאי/ת / מהנדס/ת חשמל - חובה 
ניסיון בניהול פרויקטים בתחום החשמל - תשתית תת קרקע + חשמל מיבנים - חובה
ניסיון בהקמת מגה פרויקטים - אתרים בטחוניים / תחנות רכבת / בתי חולים - יתרון משמעותי המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8328443
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 23 שעות
תפקיד פלוס- סניף באר שבע
דרושים בתפקיד פלוס- סניף באר שבע
סוג משרה: משרה מלאה
לחברה גדולה בתחום הסולארי דרוש.ה מנהל.ת פרויקטים מסחרי.
מהות התפקיד:
1. ניהול תהליך הביצוע מקצה לקצה - משלב קליטת הפרויקט בחברה (קליטת הפרויקט בחברה משמעותו המעבר מהזמנת לקוח (הזמנה באחריות מחלקת המכירות) לתפעול ועד מסירת הפרויקט ללקוח והעברת הפרויקט לשירות הלקוחות.
2. ליווי הלקוחות לכל אורך התהליך.
3. ניהול ישיר של מנהלי הפרויקטים.
4. ניהול מטריציוני של נותני השירות הפנימיים.
5. בקרה על עמידה ביעדים,לוחות הזמנים של הפרויקטים, גבייה וכד.
6. ניהול הפרויקטים בשטח.
7. ניהול תקציבי של הפרויקט.
משרה מלאה+רכב
דרישות:
מהנדס.ת חשמל- יתרון משמעותי
הנדסאי חשמל/חשמלאי ראשי-חובה
רישיון חשמל של 630 אמפר-חובה.
ניסיון קודם בניהול פרוייקטים סולאריים-חובה
יכולת ונייסון בניהול קבלני משנה.אנגלית ברמה גבוהה
אסרטיביות ראש גדול ויכולת למידה עצמית.
המשרה מיועדת לנשים ולגברים כאחד. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8305999
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
ענת רונן - יועצת משאבי אנוש
מיקום המשרה: פתח תקווה
לחברה מובילה בתחום האנרגיות המתחדשות דרוש/ה מנהל /ת פרויקטים בהקמה.
ניהול פרויקטים משלב ההסגירה הפיננסית, דרך שלב ההקמה ועד התפעול בשטח של קבלן מבצע.
ניהול ממשקי עבודה פנים ארגוניים, לרבות פיתוח, הנדסה, כספים וניהול ממשקים עם קבלנים, ספקי ציוד גלובליים, חברות ניהול, פיקוח ושותפים עסקיים.
ניתוח אבני דרך עיקריות והבנת הסיכונים והחשיפות החוזיות, אסטרטגיות משא ומתן לטובת פתרונות פרואקטיביים.
ייצוג שוטף ועדכון התקדמות הפרויקט בפני ההנהלה, השותפים ושאר בעלי עניין.
דרישות:
תואר ראשון בהנדסת חשמל/אזרחית/מכונות או תחומים רלוונטיים נוספים חובה!
לפחות 5 שנות ניסיון קודם בניהול פרויקטים של הקמת תשתיות ומבנים, תשתיות חשמל, ניהול קבלנים, יועצים ומתכננים.
ניסיון קודם מתחום האנרגיה המתחדשת יתרון.
יכולת תיעדוף משימות וניהול ממשקים מרובים בו-זמנית.
אוריינטציה טכנית עם יכולת יוצאת מן הכלל בראיית המאקרו.
שליטה מלאה בעבודה עם יישומי Office לרבותExcel ו-MS Project חובה!
אנגלית ברמה גבוהה (דיבור, קריאה וכתיבה) חובה!
התפקיד עשוי לכלול נסיעות לחו"ל. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8089091
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
יערה פיינר-אבחון והשמה
דרושים ביערה פיינר-אבחון והשמה
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
לחטיבת האנרגיה של חברה מובילה בתחומה דרוש/ה
מנהל /ת חדר בקרה

החברה מתמחה בשירותי הקמה, ניטור ותחזוקה (O M) למתקני אנרגיה מתחדשת, באמצעות מוקד בקרה טכנולוגי הפועל 24/7, תוך שימוש במערכות SCADA, מערכות אגירה ופתרונות בינה מלאכותית.
ניהול חדר בקרה עם 5 מנטרים

מחפשים מועמד/ת:
ניהל/ה תחזוקה בשטח בתחום האנרגיה (PV ואגירה) שרוצה לעשות הסבה לתפקיד ניהולי משרדי במטה
או מנהל /ת חדר בקרה או מנטר/ת שרוצה לעשות קפיצה לתפקיד ניהולי

חדר הבקרה ממוקם במרכז הארץ
שעות עבודה: ימים א-ה 8-17
אפשרות להקפצות במקרים חריגים


תחומי אחריות:
ניהול צוות של 5 עובדים (גיוס, הכשרה, שיבוץ, ליווי מקצועי)
ניטור מערכות בזמן אמת: זיהוי תקלות, התראות, ירידות תפוקה
תעדוף משימות ושיבוץ צוותי שטח בהתאם לצרכים תפעוליים
הפקת דוחות ביצועים תקופתיים להנהלה וללקוחות
ניתוח מגמות ונתונים, שיפור זמינות ותהליכים
עמידה ביעדי SLA וזמני תגובה
ממשק שוטף עם גורמים פנים-ארגוניים ולקוחות
דרישות:
הנדסאי/ת /מהנדס/ת חשמל-חובה
ניסיון ניהולי קודם בצוות של לפחות 3 עובדים חובה
היכרות מעשית עם מערכות סולאריות חובה
ניסיון עם מערכות ניטור (SCADA), מערכות אגירה יתרון משמעותי
שליטה ב-Excel, Priority ומערכות CRM
יכולת ניתוח נתונים, סדר וארגון, גישה שירותית וניהול ממשקים
נכונות לעבודה בשעות לא שגרתיות ובסופי שבוע לפי צורך המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8229504
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
ESR - השמה להייטק
דרושים בESR - השמה להייטק
סוג משרה: משרה מלאה
תנאים נוספים:קרן השתלמות, ביטוח מנהלים
דרוש/ה מנהל /ת מחלקת חשמל
 מיקום: צור יגאל | חברה יצרנית בתחום מערכות אוטומציה ומערכות בטחוניות

במסגרת התפקיד:

אחריות מלאה על ניהול מחלקת החשמל

פיתוח פתרונות חשמליים מתקדמים לקווי ייצור

תכנון והקמת מערכות חשמל: רתמות, תיבות וקרונות

ניהול צוות מהנדסים וטכנאים

הובלת פרויקטים מול לקוחות וגורמים פנימיים

הקפדה על עמידה בסטנדרטים גבוהים של איכות, בטיחות ודרישות טכניות בתחום הביטחוני
דרישות:
תואר ראשון בהנדסת חשמל חובה

רישיון חשמל בתוקף חובה

ניסיון של 56 שנים בתחום החשמל ובניהול פרויקטים מולטידיסציפלינריים מורכבים חובה

ניסיון ניהולי של 56 שנים חובה

ידע מעמיק בתחום אוטומציה ופתרונות חשמליים

ניסיון מוכח בתכנון מערכות חשמל חובה

היכרות עם תקנות בטיחות ורגולציה בתחום החשמל

ניסיון וידע בדרישות טכניות בתחום הצבאי/ביטחוני יתרון משמעותי

 המשרה מיועדת לנשים ולגברים כאחד המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8327610
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
אנרגטים
סוג משרה: משרה מלאה
לחברה יזמית מובילה בתחום האנרגיה המתחדשות דרוש/ת מתכנן/ת!
התפקיד כולל: ניהול ובקרת תכנון הנדסי לפרויקטים סולאריים גדולים, בדגש על תכנון סולארי ותכנון חשמל, לרבות תחומי התכנון האזרחי, מכאני, תקשורת, אבטחה, אפיון צרכים ודרישות, ניהול, הדרכה ופיקוח על צוות יועצים ומתכננים, מעקב שוטף על התקדמות הפרויקט אל מול מגוון ממשקים פנים וחוץ ארגוניים, תוך הקפדה על עמידה בלו"ז

ניהול וסנכרון תכנון הנדסי של פרויקטים בתחום האנרגיות המתחדשות מול משרדי תכנון, יועצים חיצוניים וממשקים פנימיים
ניהול ממשק העבודה מול חח"י ונגה בהבטי תיאום טכני, חיבור וסנכרון חשמלי של הפרויקט עם הרשת
תמיכה בשלבים המוקדמים של הפרויקט מול מחלקת פיתוח עסקי וסטטוטורי
תמיכה בשלבי ההקמה והאחזקה וקבלת המערכת וסנכרונה מול חח"י ונגה
בחינה טכנו-כלכלית של הפתרונות המוצעים ע"י הקבלנים בגישה מאתגרת ומיקצועית
דרישות:
תואר ראשון בהנדסת חשמל חובה
ניסיון עבודה של 2-4 שנים בתחום תכנון הנדסת חשמל במשרד תכנון/ חברת תשתיות או אנרגיה - חובה
ניסיון בתחום ה- PV- יתרון
ניסיון בעבודה מול חח"י או נגה - חובה
ניסיון בתכנון תחמ"ש יתרון
כושר ביטוי מצוין בעברית ואנגלית: דיבור, קריאה וכתיבה - חובה המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8291260
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
יערה פיינר-אבחון והשמה
דרושים ביערה פיינר-אבחון והשמה
לחברת אנרגיה ציבורית גלובלית מובילה, דרוש/ה מנהל /ת פרויקטים בהקמה לשוק ישראל.

עבודה במטה החברה במרכז הארץ ויציאה לשטח;
ייתכנו גם טיסות לחו"ל.

הגדרת תפקיד -
ניהול פרוייקטי הקמה בתחום אנרגיה מתחדשת(רוח/אגירה/סולרי) החל מהסגירה הפיננסית ועד לשלב ההקמה והתפעול בשטח.
ניהול ממשקי עבודה פנים ארגוניים (פיתוח, הנדסה, כספים) וניהול ממשקים עם קבלנים, ספקי ציוד גלובליים, חברות ניהול, פיקוח ושותפים עסקיים.
ניתוח והבנת הסיכונים, גיבוש אסטרטגיות משא ומתן לטובת פתרונות.
ייצוג שוטף ועדכון התקדמות הפרויקט בפני ההנהלה, השותפים ושאר בעלי /ות עניין.
נא לציין צ"ש - תינתן אופציה בעת שליחות הקו"ח במכתב מקדים.
דרישות:
תואר ראשון בהנדסה אזרחית/בניין/מכונות/חשמל - חובה.
10- 5 שנות ניסיון קודם בניהול פרויקטים של הקמת תשתיות ומבנים, ניהול קבלנים, יועצים ומתכננים.
שליטה מלאה בעבודה עם יישומי Office לרבות Excel ו-MS Project - חובה.
אנגלית ברמה גבוהה מאוד - חובה. שפת אם - יתרון גדול.
כישורי ניהול עצמי מעולים, תיעדוף משימות וניהול ממשקים מרובים בו -זמנית.
נכונות לנסיעות לחו"ל (התפקיד עשוי לכלול נסיעות לחו"ל). המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
7934506
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
אנרגטים
סוג משרה: משרה מלאה
דרוש/ה מהנדס/ת SCADA לחברה יזמית בתחום אנרגיות מתחדשות!

ניהול ובקרת תכנון הנדסי של מערכת ניטור ואיסוף נתונים של מערכות ייצור חשמל, בפרויקטים בתחום ה- PV והרוח
איפיון והגדרת דרישות טכניות חדשות למערכת הסקאדה
בקרה הנדסית על ספק מערכת הסקאדה ועל קבלן הביצוע, בתהליכי יישום הדרישות
עבודה למול רשויות: חברת החשמל, נגה ומשרד האנרגיה
תמיכה שוטפת בצוותי ההנדסה המקצועיים בשטח: צוותי ההקמה, האחזקה והניטור
תמיכה בכל שלבי החיבור- קבלת המערכת הסופית וסנכרונה עם כלל מערכות התקשורת בפרויקט

משרה מלאה באזור המרכז
דרישות:
דרישות
ניסיון והשכלה רלוונטיים למשרה:
ניסיון בתכנון מערכות ניטור ובקרה אוטמטיות - חובה
ניסיון עבודה בתחום האנרגיה המתחדשת- יתרון
שליטה מלאה בעברית ואנגלית: דיבור, קריאה וכתיבה - חובה
ידע בפרוטוקולי תקשורת נתונית, לדוג' מודבוס
הנדסאי.ת/מהנדס.ת חשמל/מכונות חובה
הכרת ציודי רשת עיקריים כגון בקרים (PLC) רכיבי תקשורת (RS485, I/O), מתגים המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8294029
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
המרכז הרפואי תל אביב (איכילוב)
דרושים בהמרכז הרפואי תל אביב (איכילוב)
סוג משרה: משרה מלאה
תנאים נוספים:קרן השתלמות
למרכז הרפואי ת"א (איכילוב) דרוש.ה אחראי.ת טכנולוגיות דימות מולקולרי.
התפקיד כולל:
ניהול ותפעול שוטף של מערכות דימות מתקדמות
ביצוע בקרת איכות וכיולים שוטפים
התאמה, עדכון ויישום של פרוטוקולים רפואיים במערכות השונות
השתתפות בתהליכי קליטה, התקנה והטמעה של ציוד חדש
מעורבות בפעילויות מחקר ופיתוח בתחום טכנולוגיות הדימות
עבודה שוטפת מול יצרני המכשור, בשיתוף עם צוותים קליניים וטכניים
דרישות:
תואר ראשון לפחות באחד מהתחומים הבאים: הנדסה ביו-רפואית, הנדסת חשמל, הנדסת מכונות, פיזיקה, כימיה או תחומים רלוונטיים אחרים.
שליטה גבוהה בעברית ובאנגלית
יכולת עבודה עצמאית ויכולת למידה מהירה
כישורי תקשורת בין-אישית מצוינים
גישה שירותית ויכולת עבודה בסביבה מרובת ממשקים
ניסיון קודם בעבודה עם מכשור רפואי, בדגש על מערכות דימות
ניסיון בעבודה עם מקורות קרינה מייננת
רקע או ניסיון בתכנות או עיבוד נתונים
תארים מתקדמים

היקף משרה:
מלאה - ימים א' עד ה'. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8305449
סגור
שירות זה פתוח ללקוחות VIP בלבד
לוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
We are looking for the best to join us as we expand our groundbreaking journey.
We are confident that your unique skillset, perspective, and passion, encouraged and inspired by our wealth of technology, research and expertise in these fields will be the driving force needed to continue being an industry spearhead for many years to come.
Position Description:
We are interested in welcoming and Embedded Software Developer to join our team in developing and designing real-time software for proprietary pioneering technology to be implemented in next-generation mobility.
Requirements:
BSc. in Computer Science or Electronic Engineering
5+ years experience as an Embedded Software Developer
Proven experience in real-time programming
Experience in Linux
Professional-level knowledge and experience in C/C++
Experience in ARM CPU architecture
Ability to acquire practical knowledge of new technologies quickly and independently
Ability to work independently, and as a team member
Strong interpersonal, written, and verbal communication skills
Eager to face challenges and enthusiastic to meeting demanding targets
Fluency in spoken and written English
Advantage to those who also have:
Knowledge of Automotive industry standards of architecture and code (AGL, AUTOSAR)
Experience in Android OS
Experience in Yocto Project
Experience in SPI, I2C, or CAN
In-depth understanding of discrete analog component properties
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8323722
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
We are looking for the best to join us as we expand our groundbreaking journey.
We are confident that your unique skillset, perspective, and passion, encouraged and inspired by our wealth of technology, research and expertise in these fields will be the driving force needed to continue being an industry spearhead for many years to come.
Position Description:
We are interested in welcoming a Senior Cybersecurity Expert to join our team, to plan, research, and develop proprietary automotive cybersecurity solutions.
Responsibilities and tasks include:
Threat and vulnerability assessment and analysis
Design, implement, and verify mechanisms to neutralize potential threats
System hardening and characterization
Penetration testing
Requirements:
5+ years experience as a Cybersecurity software engineer
Strong background in low-level cybersecurity, especially with embedded systems
Strong embedded C++ skills
Strong Cybersecurity research and hacking skills, or relevant experience in IDF cyber units
Strong Linux and/or RTOS low-level programming
Self-learning skills with the ability to investigate and implement new technologies
Ability to work both independently and as a team member
BSc. or higher in Electrical Engineering, or Computer Engineering
Strong interpersonal, communication (written and verbal) skills, and presentation skills
Fluency in English
Advantage to those who also have:
Knowledge of automotive industry, systems, and regulations
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8323096
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
Which department will you join? our company's VLSI team - a group designing the EyeQ chips for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering. Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Backend Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.
Requirements:
BSc or MSc degree in Computer Engineering or Electrical Engineering.
5+ years of experience in physical design.
Experience in scripting languages like Tcl/python/Perl/tcsh.
Team player with excellent communication skills, customer orientation, and a can-do attitude.
Experience in relevant domains - Advantage.
Building or maintaining implementation tools and flow Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316813
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
The company's EyeC VLSI team designs cutting-edge chips for RADAR systems used in ADAS and autonomous vehicles and is looking for an experienced DFT Engineer. This is a unique opportunity to join a team of top-tier engineers working with the most advanced technologies to develop Autonomous Vehicle (AV) SoCs. Every engineer in our team plays a broad and diverse role, taking on significant responsibilities, being involved in critical development stages, and making a direct impact on the success of our projects.
What will your job look like:
You'll be responsible for the architecture of DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary RTL for the different modules
Verify and Validate your design in GLS
Develop ATPG patterns to the highest requirements of Functional Safety (ISO26262).
Debug and analyze coverage and yield loss
Support production activities and Si debug.
Requirements:
BSc or MSc in Electrical and Electronics Engineering.
Proven Experience in either SCAN or MBIST tools and flows.
At least 2 years of DFT experience in both SCAN/MBIST.
At least 5 years of experience in the ASIC/SoC industry.
Excellent communication skills and team spirit.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316788
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.
Requirements:
BSc in Electrical engineering/Computer Engineering.
Over 5 years of experience in Logic design.
Experienced in all ASIC flow from definition to implementation.
Experience in design for power- Advantage.
Experience in High-speed I/Fs or algorithm blocks - Advantage.
Knowledge in CDC and low power flow - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316769
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
The RFIC/Analog design groups in our company's Radar organization is responsible for developing the cutting edge Transceivers in mmW frequencies for the best Imaging Radar technology. The design process includes the entire process from specs to productization. To support these challenging processes, we need a skilled CAD team that will work with the design teams on all design aspects and flows from design environment setups, through design tools implementations and support and to chip level verifications and validation enablement. We're looking for an Experienced CAD or Design Automation Engineer to develop our company's RF/Analog design tools/flows and automation flows for the next-generation Imaging Radar chips.
What will your job look like:
Build and support RF/analog design environments
Implement, develop, and maintain design flows, tools and scripts.
Evaluate and explore new automation technologies and advocate for efficiency improvements
Evaluate multiple vendor solutions and guide execution, in the most optimal use, based on design needs
Effectively communicate and support a large number of designers, providing high-quality tools and flows, documentation, and presentations.
Requirements:
BSc in Electrical Engineering, Computer Engineering or Computer Science
5+ years of experience in CAD/Design automation
In-depth understanding of RFIC/Analog Design flows
Design automation expert with the ability to write complex Python/Perl scripts
Experience with Virtuoso and Cadence tools, Calibre, Totem/Voltus, PERC
Analytical ability, problem-solving and communication skills
Independent and experienced to develop the required flows
Experience in Skill code - advantage
Experience with main vendors' tools - advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316757
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
Which team will you join? our company EyeC VLSI team - a group designing the chips for Radar systems for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
You will take a central hands-on role in Design Verification.
Define Environment micro-Architect, Implement complex UVM environment, Build vPlan .
Execute coverage implementation.
Be part of external IP verification and Internal custom IP.
Be part of System definition and top-level activity.
Take part in Silicon bring-up.
Requirements:
Bsc/MSC in Electrical engineering/Computer engineering .
Over 5 years of experience in a design verification role .
Experience in UVM.
Experience in System Verilog.
Experience in high-speed I/F - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316656
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
Which department will you join? our company's VLSI team - a group designing the EyeQ chips for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering. Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.
Requirements:
BSc or MSc degree in Computer Engineering or Electrical Engineering.
2+ years of experience in Physical Design.
Experience in scripting languages like Tcl/python/Perl/tcsh.
Team player with excellent communication skills, customer orientation, and a can-do attitude.
Building or maintaining implementation tools and flow Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316372
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
Join our advanced packaging team to define and develop cutting-edge semiconductor package solutions for automotive-grade digital and RF System-on-Chip (SoC) products. Youll collaborate with internal teams and external OSATs to deliver high-performance, manufacturable, and reliable packages that meet stringent automotive standards.
What will your job look like:
Define and specify advanced package architectures for digital SoCs and RF ICs in automotive applications.
Perform substrate design for flip-chip BGA (FC-BGA) packages, including stack-up, routing, and ball-out optimizations.
Evaluate and select substrate technologies, materials, and package solutions based on performance, cost, and reliability.
Collaborate with OSATs to define and validate assembly materials and process flows.
Work closely with internal teams such as Backend, SIPI, Product Engineering, and Quality & Reliability to ensure seamless integration.
Monitor yield, quality, and manufacturability across package development and production stages.
Support DFM reviews and ensure compliance with automotive standards and customer requirements.
Requirements:
B.Sc. or M.Sc. in Electrical Engineering, Materials Science, or a related field.
3+ years of experience in semiconductor package design and assembly.
Deep knowledge of package design, substrate engineering, and simulation methodologies.
Hands-on experience with package layout tools such as Cadence Allegro Package Designer or Xpedition Package Designer.
Solid understanding of high-speed layout constraints (e.g., crosstalk, EMI, RFI) and proven experience with interfaces like DDR, PCIe, MIPI, and UFS.
Strong background in schematic review, capture, and system-level integration.
Proficiency in scripting for automation and design optimization with tools like MATLAB or Python advantage.
Proficiency in layout design verification tool such as CAM350- advantage.
Experience working directly with OSATs advantage.
Proven experience with SIPI simulation tools like Ansys SIwave, Ansys HFSS, Cadence Sigrity and Siemens HyperLynx advantage.
Proven experience with thermal or thermo-mechanical simulation tools like Cadence Celsius, Ansys Icepak, Ansys Mechanical and Flotherm - advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316160
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
As a Quality and Reliability (Q&R) Engineer, you will lead the qualification and long-term reliability of advanced System-on-Chip (SoC) semiconductor products for automotive applications. Youll work across digital and RF domains to ensure robust performance and compliance with industry standards.
What will your job look like:
Define and manage Quality and Reliability specifications, simulations, and qualification plans for SoC die and package.
Plan and execute automotive-grade qualifications per standards such as AEC-Q100, JEDEC JESD22, and IATF 16949.
Design and implement die-level and package-level stress tests.
Select and prepare electrical, environmental, and mechanical test platforms for reliability testing.
Define requirements for Pre-Si Q&R (e.g. ESD, LU, EM, IR drop), Design-for-Test (DFT), electrical characterization, and Post-Si Q&R testing of digital, mixed-signal and RF SoCs.
Collaborate extensively with internal design teams, external subcontractors, and outsourcing partners (OSATs).
Lead failure analysis, reliability modeling, and corrective action processes (e.g., 8D, FMEA, FMEDA).
Document and certify automotive standards compliance, including PPAP/APQP deliverables.
Requirements:
BSc/MSc in Electrical Engineering, Physics, or related field.
5+ years of experience in semiconductor Q&R, preferably with SoCs, ASICs, VLSI, or RF ICs.
Strong knowledge of semiconductor physics, packaging technologies, materials and reliability mechanisms.
Hands-on experience with Q&R test design and environmental stress testing.
Deep understanding of failure prediction models, reliability simulations, and statistical analysis.
High proficiency in English, including strong verbal, reading, and writing skills.
Familiarity with RF reliability concerns advantage.
Expertise in automotive Q&R standards, including AEC-Q100, IATF 16949, and JEDEC/ISO/IEEE protocols -advantage.
Experience with advanced packaging Q&R (e.g., WLCSP, FCBGA) -advantage.
Exposure to radar or ADAS/AV automotive systems Q&R advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316151
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
our company provides modular automotive systems that transform mobility by bringing cutting-edge, safe-by-design self-driving technology and a complete, modular solution with flexible business models to the market. As a Senior HW System Architect, your role will be to work closely with our OEM partners and realize a successful integration of the ADAS to self-driving technology in these platforms
What will your job look like?
Lead end-to-end life cycle of the System architecture - from analyzing OEMs (customers) technical requirements to HW architecture definition, development and verification to ensure integration of our company's products into the vehicle platform.
Work in close collaboration with various groups including algo, HW design, verification, SW architect, Mechanics, and simulations.
Provide architectural guidance and tradeoff recommendations throughout the whole design process from concept through production.
Responsible for the main components selection and technical evaluation (trade-off between cost/performance etc.)
Provide practical system architecture definition to board designers and SW/algo by managing system external Interconnects and internal interfaces, SoC, MCU, definitions and optimization (based on OEMs requirements and other constraints).
Requirements:
BS or MS Degree in Electrical Engineering
At least 20+ years of significant board design and systems and working with multi-disciplinary products and High-speed design.
Experience in architecture definition - Clocks, Resets, Interconnects, DDR Memory Controller, Boot, Power Management, Thermal, System Performance, IO technologies, (PCIe, ETH, USB, etc), CPU and Platform integration.
Experience in solving issues at all levels of architecture definition.
Demonstrated experience working on sophisticated automotive systems. Architecture/development experience - advantage
Deep understanding of MIPI and SerDes (like as FPD-Link, GMSL and A-PHY), Functional Safety, ISO26262 standards advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316061
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
We are seeking a highly skilled and hands-on Senior Radar Product Test Engineer to support the end-to-end production and validation automotive radar systems. This role bridges automated test equipment (ATE) development, product analysis, and production debug, ensuring high-quality sensor delivery and minimal downtime across global production sites. The position includes deep technical involvement in both software and hardware domains and may include international travel to support production lines .
What will your job look like:
Develop and maintain automated test equipment (ATE) and debug tools to ensure robust and reliable testing of radar products.
Support production partners by addressing urgent ATE or DUT-level issues and minimizing downtime.
Run and debug radar test sequences using MATLAB/Python, supporting both algorithm and production KPIs.
Perform root cause isolation across hardware, software, test stations, and environment.
Collaborate with software, algorithm, RF, and hardware teams to resolve failures efficiently.
Maintain traceability of test issues using JIRA, Tableau, and internal log systems.
Escalate repeated, critical, or systemic failures, and drive continuous process improvement.
Track unit status and production KPIs across global sites
Participate in FAT (Factory Acceptance Test), ECN implementation, and test station upgrades.
Coordinate with system integration, production, and software engineering teams to align on release readiness.
Requirements:
Bachelors degree in Electrical Engineering, Computer Science, or related technical field.
3+ years of experience in production testing, preferably in radar or RF-based systems.
Proven track record in debugging ATE systems, test log analysis, and calibration workflows.
Experience with Python and MATLAB for test automation and analysis.
Solid understanding of hardware debugging (especially RF and sensor boards).
Willingness to travel internationally to support test stations and debug activities
Familiarity with automotive radar, mmWave, and production test flow optimization - advantage
Exposure to FAT/SAT processes, statistical analysis (e.g., CPK, 6 Sigma) - advantage
Hands-on experience with JIRA, Tableau, and test result database systems - advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8316034
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.
Requirements:
BSc in Electrical engineering/Computer Engineering.
Over 7 years of experience in Logic design.
Experienced in all ASIC flow from definition to implementation.
Experience in design for power- Advantage.
Experience in High-speed I/Fs or algorithm blocks - Advantage.
Knowledge in CDC and low power flow - Advantage
our company changes the way we drive, from preventing accidents to semi and fully autonomous vehicles. If you are an excellent, bright, hands-on person with a passion to make a difference come to lead the revolution!
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8315871
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
22/08/2025
Location: Petah Tikva
Job Type: Full Time
We are a green tech company unlike any other green tech company. We are a team of lateral thinkers, young professionals, and creative minds. We are fighting every day to make our mission happen Clean Power For All! With ~400GW (!) of clean power presently installed worldwide, we are more than ready to sate the worlds hunger for clean energy! Welcome at is the global leading inverter solution supplier for renewables. We want to give fresh impulses, inspire, and contribute to a sustainable development of our planet, thats why we constantly improve our portfolio. From floating solar plants to large-scale utility projects and to small residential products we always offer the best and most suitable solution. we hold more than 1500 patents no wonder as we employ the biggest research and development team of the whole industry. 40 % of all workforce is continuously investigating on how to further improve the existing portfolio. Want to know more? Check out our Job offers and let`s dive right in together!

We are looking for a skilled and driven Technical Sales Engineer to lead our Distribution product portfolio for the Residential and Commercial & Industrial (C&I) segments.
In this role, you will play a key part in shaping the future of clean energy by driving product strategy, supporting technical pre-sales activities, managing certifications, influencing customer decisions, and ensuring seamless end-to-end service delivery.
Interviews will be held in English.

Responsibilities:
Lead technical pre-sales activities, including customer meetings to assess technical requirements and develop tailored solution proposals based on product portfolio.
Own the end-to-end service process from solution delivery to after-sales technical support ensuring seamless implementation, customer satisfaction, and long-term reliability. This is a core part of the role and vital to customer experience.
Drive product certification processes, coordinating with HQ and local offices to meet all relevant standards (e.g., SII, IEC, etc.).
Support tender processes, including preparation of technical documentation and follow-up with customers at the technical level.
Manage product presentations and technical documentation, ensuring content is accurate, up-to-date, and aligned with product strategy.
Influence purchasing decisions by clearly articulating the technical, commercial, and service advantages of solutions.
Collaborate with key stakeholders, including EPCs, IPPs, investors, and distributors, to ensure smooth project execution and customer alignment.
Benchmark products against competitors to inform strategic positioning and continuous improvement.
Represent at national and international trade fairs, conferences, webinars and training sessions showcasing product capabilities and gathering market insights.
Travel regularly within Israel for customer visits, with occasional travel to Europe and headquarters in China.
Requirements:
Bachelors degree in electrical engineering - power electronics, or a comparable higher education qualification.
At least two years of experience in technical product management, technical support or sales engineering. With preference in the renewables energy industry Inverters, ESS, EV Charging, EPC.
Strong technical understanding on inverter products and/or energy storage systems in the C&I segment with commercial sales knowledge - advantage.
Excellent communication skills in English both written and spoken - mandatory. Chinese language skills- plus.
Excellent interpersonal and communication skills.
Very good knowledge in MS-Office and CRM software.
Willingness to travel domestic and internationally on a regular basis.
Hands-on attitude with a can-do mentality.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8314709
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
22/08/2025
Location: Petah Tikva
Job Type: Full Time
We are a green tech company unlike any other green tech company. We are a team of lateral thinkers, young professionals, and creative minds. We are fighting every day to make our mission happen Clean Power For All! With ~400GW (!) of clean power presently installed worldwide, we are more than ready to sate the worlds hunger for clean energy! Welcome at is the global leading inverter solution supplier for renewables. We want to give fresh impulses, inspire, and contribute to a sustainable development of our planet, thats why we constantly improve our portfolio. From floating solar plants to large-scale utility projects and to small residential products we always offer the best and most suitable solution. we hold more than 1500 patents no wonder as we employ the biggest research and development team of the whole industry. 40 % of all workforce is continuously investigating on how to further improve the existing portfolio. Want to know more? Check out our Job offers and let`s dive right in together!

We are seeking a dynamic PV Field Service Engineer to join our team at , playing a critical role in advancing our renewable energy solutions. As a Field Service Engineer, you will contribute significantly to the future of various renewable energy products and solutions, serving as an interface between our customers.

Ideal Candidate:
The ideal candidate will have a background as a practical Electrical Engineer or Electrical Engineer with a valid electrical license and comprehensive understanding of AC/DC, Low/Medium Voltage systems, networking and system controls. Proficiency in both Hebrew and English languages at a minimum of C1 level is required. The role will require on-call duty and the ability to oversee critical customer situations. Experience with renewable energy solutions is highly beneficial, and a valid driving license is essential due to frequent travel requirements.

Responsibilities:

Serve as the primary interface between customers , taking ownership of dispatched customer issues across various renewable energy solutions.
Provide comprehensive service and customer support during field visits or dispatches, running diagnosis on errors or technical problems.
Deliver on-site installation, repair, maintenance, testing tasks, upgrades, or rework activities for diverse renewable energy products.
Provide remote support to clients as needed.
Leading projects during commissioning and site acceptance services for various renewable energy solutions.
Adhere to operational procedures, processes, and practices consistently, ensuring compliance.
Follow applicable health and safety instructions and regulations for various renewable energy installations and services.
Maintain updated documentation, work instructions, and processes for existing and upcoming service contracts and agreements, including reports creation.
Requirements:
Education as practical Electrical Engineer or Electrical Engineer, with a robust understanding of AC/DC, Low/Medium Voltage systems, and valid electrical license (3x250A or higher) - a must!
Proven record and minimum 1 year of experience commissioning PV inverters in utility-scale projects- a must!
Strong knowledge and practical experience with RS485, Modbus TCP/IP, and networking- a must!
Strong team player with a proven track record of working effectively within a team.
Proficiency in both Hebrew and English languages at least at a C1 level.
Possession of a valid driving license.
Excellent human relations and communication skills.
Proven experience in handling customers in critical situations.
Out of the box thinker, curious to learn and solve problems.
Passionate about renewable energy products and cutting-edge technologies in energy storage systems.
On-call duty required.
Capability for a full-time on-site position.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8314703
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות שנמחקו
ישנן 243 משרות במרכז אשר לא צויינה בעבורן עיר הצג אותן >