לוח משרות דרושים חשמל ואלקטרוניקה ברחובות, לחיפוש זה נמצאו 170 משרות

we are looking for a Senior Flight Control Engineer.
What you'll own:
Design, implement, and tune the vehicle's core control laws in MATLAB/Simulink, with acoustic-source models embedded directly in the design loop.
Develop control strategies that treat radiated noise as a hard constraint alongside stability margins and handling qualities, through every phase of flight.
Build and maintain the nonlinear 6-DOF simulation environment used for control design, Monte Carlo robustness analysis, and pre-flight rehearsal of every test point.
Define attitude, rate, and trajectory constraints for noise-critical flight phases - departure, approach, and low-altitude operations over populated areas - jointly with the Acoustics team.
Autocode flight-critical control software to the real-time flight computer and verify it through processor-in-the-loop and hardware-in-the-loop campaigns.
Plan and execute flight test campaigns: write test cards, monitor telemetry in real time, and lead post-flight reconciliation of data against model predictions.
Run system identification programs that anchor aerodynamic, actuator, and noise-source models in flight data, feeding corrections back into the next control law release.
Lead control law design reviews with documented stability margins, robustness analyses, and failure-mode behavior, building the evidence base certification authorities will eventually audit.

we are looking for a Electric Propulsion Engineer.
What you'll own:
Design and analyze motor electromagnetics with torque ripple, cogging torque, and radial force harmonics treated as hard requirements alongside efficiency and power density.
Develop inverter modulation and current-control strategies - including harmonic injection and active ripple compensation - that suppress electromagnetic excitation before it becomes radiated tone.
Build and validate multiphysics models chaining electromagnetic force prediction through structural transfer paths to radiated noise, correlated against dyno and vehicle data.
Plan and execute dyno test campaigns with synchronized electrical, vibration, and acoustic instrumentation, owning the data pipeline from raw capture to engineering verdict.
Integrate motors, inverters, and mounts into the vehicle's novel lift and propulsion architecture, working structure-borne transmission paths jointly with the Structures and Acoustics teams.
Characterize thermal behavior on the dyno and derive continuous and peak torque envelopes that hold across the full flight profile.
Define acceptance and qualification test procedures for propulsion units, including back-EMF, efficiency-map, vibration, and acoustic signature checks.
Lead propulsion design reviews and hardware failure investigations, driving root cause to closure with documented corrective actions.

we are looking for a Computer Vision & Autonomy Engineer.
What you'll own
Design and own multi-sensor fusion pipelines - camera, radar, GNSS/INS, and altimetry - delivering robust, high-rate state estimation through GNSS-degraded urban environments.
Build the landing-site perception system: real-time detection, geometric assessment, and obstruction monitoring of vertiports and contingency sites during steep, noise-optimal approaches.
Train, quantize, and deploy neural perception models on embedded flight compute, owning latency, memory, and power budgets down to the millisecond.
Develop perception for detect-and-avoid: tracking non-cooperative traffic - small UAS, birds, general aviation - at ranges that preserve quiet, gentle avoidance maneuvers.
Stand up the data engine: flight-test data collection, ground-truth generation, dataset curation, and automated regression of model performance across releases.
Validate the perception stack in high-fidelity simulation, sensor replay, and hardware-in-the-loop benches before any algorithm touches the vehicle.
Architect run-time monitoring and assurance around learned components, producing the evidence structure a certification authority can eventually accept.
Support flight test campaigns end to end: integrate and calibrate sensors, analyze logs, and turn every anomaly into a fix or a documented limit within days.

Required Advanced Manufcaturing Engineer
Job Description Summary
Activities contributing to the design and development of products, solutions and systems. Includes activities linked to technical improvement of existing products and components Impacts quality of own work and the work of others on the team. Executes standard operational/technical tasks typically subject to instructions and work routines. There is latitude to rearrange the sequence to complete task/duties based on changing work situations.
Job Description
Activities contributing to the design and development of products, solutions and systems. Includes activities linked to technical improvement of existing products and components Impacts quality of own work and the work of others on the team. Executes standard operational/technical tasks typically subject to instructions and work routines. There is latitude to rearrange the sequence to complete task/duties based on changing work situations.
Key Responsibilities:
Support the development, optimization, and control of manufacturing processes (e.g., lithography, etch, deposition, CMP, diffusion).
Monitor and analyze process performance, yield, and defectivity trends.
Perform root cause analysis and implement corrective actions for process deviations and excursions.
Collaborate with cross-functional teams (R&D, equipment engineering, quality) to improve process stability.
Assist in process qualification, technology transfer, and new product introduction (NPI).
Maintain and update process documentation, SOPs, and control plans.
Use statistical tools (SPC, DOE) to drive continuous improvement.
Support troubleshooting of equipment and process-related issues.
Ensure compliance with safety, cleanroom protocols, and quality standards.

This is an opportunity to embark on an interesting and challenging adventure into the world of satellite communication which is undergoing a major disruptive revolution.

The LS includes Control and data processing HW, SW as well as Phy and Radio HW and FW, to construct a full communication system supporting DVB-S2X as well as other Radio and IP communication protocols.

 Responsibilities

Landing station system validation activity including Phy, HW and SW validation
Study system architecture and system requirements and take part in a test plan to address these requirements in collaboration with system engineering and other teams
Define and write automatic test plans and test procedures for new systems and features
Build test setups for fully automated regression as well as for manual tests
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems
Record, investigate and analyze defects
Investigation of root cause of test case failures and providing corrective action in conjunction with development teams
Support Test Management tools and continuous integration methodologies
Data analysis and post processing of data collected
Compilation of regular Test execution summary report with metrics

Our Sat Connect IC business unit, a division of our Satellite Systems business is a leading provider of ASICs, software, multibeam electronically steered antennas, and complete systems for communication satellites, as well as ground and airborne terminals. Located in Israel, the UK, Bulgaria, and the US, we are a techno logy leader in satellite communication.

Job Description:

Be part of a dynamic and motivated modem VLSI design team. Take part in a complex SOC VLSI chip-design activities with major focus on advanced digital signal processing and modem subsystem development, covering architectural, front-end design, verification and physical-design aspects.

VLSI development of digital modules from concept to final implementation, meeting physical design entry requirements
Be part of a multi-team developing advanced signal processing cores and subsystem solution
In charge of adjusting, deploying and integrating the subsystem into company design environment

Our Sat Connect IC business unit, a division of our Satellite Systems business is a leading provider of ASICs, software, multibeam electronically steered antennas, and complete systems for communication satellites, as well as ground and airborne terminals. Located in Israel, the UK, Bulgaria, and the US, we are a techno logy leader in satellite communication.

Responsibilities

System validation activity includes Phy, HW and SW validation
Study system architecture and system requirements and take part in a test plan to address these requirements in collaboration with system engineering and other teams
Define and write automatic test plans and test procedures for new systems and features
Build test setups for fully automated regression as well as for manual tests
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems
Record, investigate and analyze defects
Investigation of root cause of test case failures and providing corrective action in conjunction with development teams
Support Test Management tools and continuous integration methodologies
Data analysis and post processing of data collected
Compilation of regular Test execution summary report with metrics

Be part of a dynamic and motivated multi-national Physical Design team, taking part in developing a state-of-the-art Satellite SoC through the full life cycle: design to production. The chips include complex digital and analog modules. Some of the products are part of the next generation radiation hardened satellite modems. You will have access to best-in-class EDA design tools and will be working in leading edge process technologies.

Responsibilities

Physical implementation of complex SoC, VLSI devices and Test Chips, integrating custom designs and 3rd party IP (Hard, Soft, IO, CPUs, DSPs, etc)
Full block level timing closure and manufacturing checks signoff including power planning and analysis
Working alongside the Logic Design RTL team to develop timing constraints for implementation at block and chip level
Insertion of DFT test structures and chip level integration, capture and simulation
Jointly with management, build your career development and growth opportunities.

Laser Systems Engineer (Maternity Leave Replacement).
We are looking for Elbit Systems in Rehovot is looking for a Laser Systems Engineer (Maternity Leave Replacement). Join a meaningful role focused on leading and supporting system integration processes for advanced electro-optical systems incorporating high-power lasers. This position offers the opportunity to work at the forefront of technology within a leading defense organization, with direct impact on the development of complex multidisciplinary systems. In this role you will Lead and define system integration processes for advanced electro-optical systems Work independently in the laboratory environment, including execution of system tests and experiments Lead multidisciplinary teams and collaborate with multiple interfaces Write and maintain technical and system documentation Work in a dynamic technological environment with challenging project timelines.

*Only relevant applications will be answered.
Rehovot#