Senior Flight Control Engineer

עדכון קורות החיים לפני שליחה

8814957

שירות זה פתוח ללקוחות VIP בלבד

לעוד משרות ומידע על אלביט מערכות >

משרות דומות שיכולות לעניין אותך

דיווח על תוכן לא הולם או מפלה

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

לפני 10 שעות

Board Design Engineer

אלביט מערכות

Location: Rehovot

Job Type: Full Time

For our site in Rehovot, we are looking for a Logic Design and Board Design Engineer to join a leading development team working on advanced electronic systems. This is an opportunity to take part in meaningful technological projects in a multidisciplinary environment, work with cutting-edge technologies, and influence complex product development from concept to integration.

In this role you will

Design logic and electronic boards for complex systems

Develop and design boards integrating FPGA, processors, and memory components

Work closely with multidisciplinary teams including software, environmental testing, and EMC

Write engineering specifications and technical documentation

Support development and integration processes throughout the product lifecycle

Participate in advanced technological projects with multiple interfaces across the organization

Requirements:
B.Sc. degree in Electrical Engineering or Electronics Engineering from a recognized academic institution

M.Sc. degree in a relevant field - Advantage

At least 7 years of experience in Logic Design and electronic board development

Experience in board design and logic design for systems integrating FPGA, processors, and memories

Knowledge of motor drivers

Knowledge in control systems - Advantage

Experience with Python programming and familiarity with operating systems - Advantage

Strong analytical skills, accountability, broad system perspective, and teamwork abilities

*Only relevant applications will be answered

This position is open to all candidates.

הגשת מועמדות

עדכון קורות החיים לפני שליחה

8763246

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

1 ימים

Aerodynamics Engineer

חברה חסויה

Location: Rehovot

Job Type: Full Time

we are looking for a Aerodynamics Engineer.
What you'll own:
Own aerodynamic design and analysis of vehicle-level configurations, trading lift-system efficiency directly against acoustic source strength across all phases of flight.
Build and run high-fidelity CFD campaigns - steady RANS for performance maps, unsteady and scale-resolving simulations where acoustic source prediction demands it - with documented mesh and turbulence-model sensitivity studies.
Couple aerodynamic predictions to acoustic propagation models, working with the Acoustics team to trace far-field noise back to specific unsteady flow mechanisms on the vehicle.
Plan and execute wind tunnel test campaigns end to end: model definition, instrumentation plans, test matrices, on-site execution, and post-test correlation against CFD predictions.
Develop and maintain the vehicle aerodynamic database - polars, control derivatives, and interactional effects - feeding flight dynamics, performance, and loads analyses.
Correlate predictions against flight test data, drive down model uncertainty, and publish updated aero models with quantified validation status.
Present design trades and analysis results at internal design reviews, defending recommendations with data when performance and noise pull in opposite directions.
Define aerodynamic requirements and acceptance criteria for vehicle hardware, and review geometry releases for compliance with the validated aero lines.

Requirements:
B.Sc. in Aerospace or Mechanical Engineering; M.Sc. or Ph.D. with a focus on aerodynamics, fluid mechanics, or aeroacoustics strongly preferred.
5+ years of hands-on aerodynamic analysis and design experience on aircraft, rotorcraft, UAS, or wind energy systems.
Demonstrated depth in CFD for unsteady, separated, and interactional flows - including solver setup, meshing strategy, and turbulence modeling judgment - using tools such as STAR-CCM+, ANSYS Fluent, or OpenFOAM.
Working knowledge of aeroacoustic prediction methods (e.g., Ffowcs Williams-Hawkings integration, broadband source modeling) or proven ability to ramp quickly on them.
Experience planning or executing experimental aerodynamics campaigns - wind tunnel or flight test - including instrumentation selection and data reduction.
Strong scripting skills in Python or MATLAB for automation of simulation workflows, post-processing, and aero database generation.
Solid command of low-speed aerodynamic fundamentals: lifting-line and panel methods, boundary layer behavior, stall and separation physics, and propulsor-airframe interaction.
Ability to write clear technical reports and defend analysis assumptions in front of senior engineers; full professional proficiency in English.

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8814953

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

1 ימים

Electric Propulsion Engineer

חברה חסויה

Location: Rehovot

Job Type: Full Time

we are looking for a Electric Propulsion Engineer.
What you'll own:
Design and analyze motor electromagnetics with torque ripple, cogging torque, and radial force harmonics treated as hard requirements alongside efficiency and power density.
Develop inverter modulation and current-control strategies - including harmonic injection and active ripple compensation - that suppress electromagnetic excitation before it becomes radiated tone.
Build and validate multiphysics models chaining electromagnetic force prediction through structural transfer paths to radiated noise, correlated against dyno and vehicle data.
Plan and execute dyno test campaigns with synchronized electrical, vibration, and acoustic instrumentation, owning the data pipeline from raw capture to engineering verdict.
Integrate motors, inverters, and mounts into the vehicle's novel lift and propulsion architecture, working structure-borne transmission paths jointly with the Structures and Acoustics teams.
Characterize thermal behavior on the dyno and derive continuous and peak torque envelopes that hold across the full flight profile.
Define acceptance and qualification test procedures for propulsion units, including back-EMF, efficiency-map, vibration, and acoustic signature checks.
Lead propulsion design reviews and hardware failure investigations, driving root cause to closure with documented corrective actions.

Requirements:
B.Sc. or M.Sc. in Electrical or Mechanical Engineering with a focus on electric machines, power electronics, or drives.
5+ years designing electric motors or motor drives for demanding applications - aerospace, automotive traction, robotics, or similar.
Deep working knowledge of electric machine noise mechanisms: torque ripple, cogging, radial force harmonics, and PWM sideband tones, and how to design them down.
Hands-on experience with field-oriented control and modulation schemes, including controller implementation and current-loop tuning in MATLAB/Simulink or PLECS.
Proficiency with electromagnetic FEA tools such as ANSYS Maxwell, Motor-CAD, or JMAG, including loss and force-harmonic prediction.
Demonstrated dyno or rig test experience: instrumentation selection, data acquisition setup, and debugging real hardware under load.
Strong Python or MATLAB skills for test data reduction, order analysis, and model correlation.
Comfortable owning hardware end to end - requirements through test - in a small team moving at startup pace.

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8814949

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

1 ימים

Acoustics Research Engineer

חברה חסויה

Location: Rehovot

Job Type: Full Time

we are looking for a we are looking for a.
What you'll own:
Develop and validate source-noise prediction models for our novel lift and propulsion architecture, from first-principles aeroacoustics through empirically anchored corrections.
Design and execute acoustic measurement campaigns in anechoic facilities and at outdoor ranges, owning microphone array design, calibration chains, and data acquisition end to end.
Reduce rig and flight-test acoustic data into validated spectra, directivity maps, and component-level source rankings that directly drive vehicle design decisions.
Quantify community-noise exposure using EPNL, SEL, dBA, and tonality-corrected metrics, and translate the results into hard, testable requirements for design teams.
Build psychoacoustic models - loudness, sharpness, tonality, fluctuation strength - and run jury listening studies that connect physical metrics to human annoyance.
Run aeroacoustic simulations coupling CFD to acoustic analogy solvers (FW-H or equivalent), and reconcile predictions against measured data every design cycle.
Define and defend the vehicle noise budget at design reviews, allocating margins across subsystems and flagging acoustic risk before hardware is built.
Author measurement procedures, test reports, and model validation documents rigorous enough to anchor future certification arguments.

Requirements:
M.Sc. or Ph.D. in aerospace or mechanical engineering, acoustics, or physics, with a focus on aeroacoustics or noise control.
4+ years of hands-on aeroacoustics work - rotorcraft, propellers, fans, turbomachinery, or airframe noise - in industry or applied research.
Proven experience running acoustic test campaigns: microphone arrays, beamforming, anechoic or wind tunnel measurements, and full calibration traceability.
Strong acoustic signal processing skills - spectral analysis, order tracking, de-Dopplerization, coherence-based source separation - implemented in Python or MATLAB.
Working command of source-noise prediction methods (Ffowcs Williams-Hawkings, semi-empirical broadband models such as BPM, or equivalent) and a clear-eyed view of their limits.
Fluency in community and certification noise metrics - EPNL, SEL, dBA - and the measurement procedures behind ICAO Annex 16 / 14 CFR Part 36 style testing.
Demonstrated ability to own a question end to end: from test plan to instrumented rig to a conclusion you would defend in front of the whole company.

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8814960

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

1 ימים

Composite Structures Engineer

חברה חסויה

Location: Rehovot

Job Type: Full Time

we are looking for a Composite Structures Engineer.
What you'll own:
Design composite primary and secondary structure - laminate definitions, ply schedules, core selections, bonded and bolted joints - from concept layout through released engineering definition.
Build, run, and own detailed FEA models for static strength, buckling, and structural dynamics, and keep them correlated against coupon, element, and full-scale test evidence.
Drive vibro-acoustic behavior of the airframe: characterize panel modal density, radiation efficiency, and structure-borne transmission paths, and turn stiffness and damping into deliberate acoustic design levers.
Define and execute structural test campaigns - building-block coupon and element tests, modal surveys and ground vibration tests - including instrumentation plans, test readiness reviews, and post-test model correlation.
Develop material allowables and laminate design values with materials and process engineers, and document the basis for every margin you claim.
Write structural substantiation reports with traceable loads, methods, and margins of safety that will stand up to a certification authority, not just an internal review.
Trade mass against transmission loss and damping treatments directly with the Acoustics team, and defend the structural side of those trades at vehicle-level design reviews.
Support the build: assess layup and tooling feasibility, review first articles, and disposition manufacturing discrepancies on flight hardware.

Requirements:
B.Sc. in Aerospace or Mechanical Engineering; M.Sc. with a structures or structural dynamics focus preferred.
5+ years designing and analyzing composite airframe or primary structure on aircraft, rotorcraft, UAS, or comparable flight vehicles.
Strong hands-on FEA capability in Nastran, ANSYS, or Abaqus across statics, buckling, and dynamics - with demonstrated correlation of models to physical test data.
Solid command of classical laminate theory, composite failure criteria, and the design of bolted and bonded joints in laminated structure.
Working fluency in structural dynamics: modal analysis, frequency response, and damping characterization, and an understanding of how these connect to radiated noise.
Experience carrying structure through physical test - static, fatigue, or modal/GVT - from test planning and instrumentation through post-test reporting.
Proficiency in Python or MATLAB for analysis automation, data reduction, and test-data processing.
Fluency in 3D CAD (CATIA, NX, or SolidWorks) and GD&T, with the ability to release production-ready structural definition.

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8814936

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

1 ימים

Computer Vision & Autonomy Engineer

חברה חסויה

Location: Rehovot

Job Type: Full Time

we are looking for a Computer Vision & Autonomy Engineer.
What you'll own
Design and own multi-sensor fusion pipelines - camera, radar, GNSS/INS, and altimetry - delivering robust, high-rate state estimation through GNSS-degraded urban environments.
Build the landing-site perception system: real-time detection, geometric assessment, and obstruction monitoring of vertiports and contingency sites during steep, noise-optimal approaches.
Train, quantize, and deploy neural perception models on embedded flight compute, owning latency, memory, and power budgets down to the millisecond.
Develop perception for detect-and-avoid: tracking non-cooperative traffic - small UAS, birds, general aviation - at ranges that preserve quiet, gentle avoidance maneuvers.
Stand up the data engine: flight-test data collection, ground-truth generation, dataset curation, and automated regression of model performance across releases.
Validate the perception stack in high-fidelity simulation, sensor replay, and hardware-in-the-loop benches before any algorithm touches the vehicle.
Architect run-time monitoring and assurance around learned components, producing the evidence structure a certification authority can eventually accept.
Support flight test campaigns end to end: integrate and calibrate sensors, analyze logs, and turn every anomaly into a fix or a documented limit within days.

Requirements:
M.Sc. in computer science, electrical engineering, or robotics - or a B.Sc. with equivalent demonstrated depth in perception systems.
4+ years building computer vision or perception software that shipped on real autonomous platforms - aerial, automotive, or robotic.
Strong modern C++ (C++17 or later) for real-time perception pipelines, plus fluent Python for training, tooling, and analysis.
Deep grounding in state estimation and sensor fusion: Kalman filtering variants, factor-graph optimization, or visual-inertial odometry in production.
Solid geometric computer vision fundamentals - multi-camera calibration, epipolar geometry, structure from motion - not just learned end-to-end models.
Hands-on deep learning for perception in PyTorch, including optimization and deployment to embedded accelerators via TensorRT, ONNX Runtime, or equivalent.
Demonstrated rigor in validating perception systems: ground-truth methodology, failure-mode characterization, and metrics you would defend at a safety review.
Field experience: you have debugged your own algorithms on real hardware outdoors, where the sun, the dust, and the multipath do not care about your test set.

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8814938

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

חברת השמה / כח אדם

10/08/2026

Electro Optical System Architect

חברה חסויה

Location: Rehovot

Job Type: Full Time

We are looking for an Electro Optical System Architect
Role Description
Our System Engineering team is a multidisciplinary group of physicists and engineers leading the development of next-generation metrology technologies from early research through full product delivery. The team designs advanced systems that integrate hardware and mechanical design, optics, electronics, motion and control, algorithms, and software for demanding semiconductor manufacturing applications.
In this role, you will help shape high-performance metrology products built for the semiconductor industry, where accuracy, precision, speed, and robustness are critical to high-volume manufacturing environments.
You will bring a combination of scientific rigor, innovative thinking, and deep system-level understanding, with the ability to investigate complex multidisciplinary challenges and translate physics- and algorithm-based insights into practical solutions.
Beyond technical expertise, you will take a broad view of the system and its business context, balancing customer needs, product requirements, serviceability, and manufacturability.
Responsibilities
What will you be doing:
Theoretical and experimental study of new system methods and algorithms to support state-of-the-art solutions
Define, drive, and own end-to-end implementation and validation of system solutions across disciplines
Lead system architecture definition and performance budgeting
Drive cross-functional technical decisions across optics, algorithms, mechanics, and SW
Serve as technical focal point for system-level trade-offs and escalations
Mentor junior engineers and researchers in system thinking and methodology
Hands on tool experiments and testing in clean-room environment
Service and production guidance and support on challenging topics
Lead cross-functional teams (HW, SW, algorithms) to deliver coherent system-level solutions
Data and statistical analysis
Advanced logic and sequence design
Algorithm development
Performance and critical behavior testing and design
Developing practical solutions and methods for critical challenges
Conduct lab and on-site system diagnostics, troubleshooting, and problem-solving. Tasks include root-cause analysis, mitigation plans, implementing robust system calibration methods, and product transfer to manufacturing.
Intensive interface with diverse disciplines: physics, optics, algorithms, mechanics, electronics, and software.
Transform customers high-level requirements into concrete technical specifications and design.
Flights to customers around the world (up to 2 times per year).

דרישות:
M.Sc. or Ph.D. in Physics or Engineering (Optics, Electrical or related disciplines)
Strong background in experimental and theoretical research applied to real-world systems (Advantage - Optics experience, Ellipsometry experience)
10+ years of experience in multidisciplinary system development within advanced technology R&D environments
Demonstrated experience in owning system-level development, including architecture definition, performance analysis, and integration across disciplines
Deep understanding of multi-disciplinary systems, including physics, optics, algorithms, electronics, mechanics, and software
Strong capability in system architecture definition, including performance budgeting, error analysis, and cross-domain trade-offs
Advanced experience in data analysis and modeling (signal processing, statistical analysis, experimental data interpretation)
Strong hands-on programming skills in Python / Matlab, with application to complex system data and modeling
Experience in algorithm development and integration within real systems
That special something you bring in:
Ability to operate effectively in highly complex, matrixed, multi-disciplinary environments
Track record of mentoring and guiding engineers/researchers in system-level thinking and methodology
Strong communication skills, with significant experience in technic המשרה מיועדת לנשים ולגברים כאחד.

עדכון קורות החיים לפני שליחה

8775759

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

חברת השמה / כח אדם

10/08/2026

System Engineer Team Lead

חברה חסויה

Location: Rehovot

Job Type: Full Time

We are looking for a System Engineer Team Lead to lead our next generation system development.
In this role, the Project Lead will technically lead a complex multidisciplinary electro-optical system architecture. He will define and manage the required performance analysis, technical solutions, implementation methods, and field deployment to the customer's satisfaction.
Responsibilities
What you will be doing:
Technical:
Design the system architecture/high-level design and technical requirements.
Serve as the system go-to person for all technical matters; a technical expert knowledgeable in system operation, performance, and troubleshooting. Act as the technical POC for system escalations and customer support.
Project Management:
Plan, monitor, and lead the project to ensure product delivery within required specifications, on time, and within the allocated budget (Gates, PMR).
Maintain a project risk management and mitigation plan.
Lead the development activities and technical reviews throughout the PLC (SRR, PDR, CDR, FDR) and other technical design reviews.
Assign project tasks, follow up, and align with development groups, service, and production.
Lead all aspects of the beta tool delivery.
Act as the key contact for inbound topics (matrix interface) and outbound topics with MKT.
Team:
Develop and grow team ownership and technical capabilities.
Provide technical guidance for System/Product engineers.

Requirements:
M.Sc. /PhD in Physics/ Engineering (Electrical, Optics or Equivalent).
5+ years of experience in multi-disciplinary system engineering
Direct technical management of 3+ people
Project management from initiation to closure (at least 1 year)
Matlab/Python hands-on knowledge
Worked in complex activities in project and matrix environments in parallel.

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8775972

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

31/08/2026

Sr. Physical Design Engineer

חברה חסויה

Location: Rehovot

Job Type: Full Time

Be part of a dynamic and motivated multi-national Physical Design team, taking part in developing a state-of-the-art Satellite SoC through the full life cycle: design to production. The chips include complex digital and analog modules. Some of the products are part of the next generation radiation hardened satellite modems. You will have access to best-in-class EDA design tools and will be working in leading edge process technologies.

Responsibilities

Physical implementation of complex SoC, VLSI devices and Test Chips, integrating custom designs and 3rd party IP (Hard, Soft, IO, CPUs, DSPs, etc)
Full block level timing closure and manufacturing checks signoff including power planning and analysis
Working alongside the Logic Design RTL team to develop timing constraints for implementation at block and chip level
Insertion of DFT test structures and chip level integration, capture and simulation
Jointly with management, build your career development and growth opportunities.

Requirements:
Bachelor of Science in Electrical Engineering, Computer Science, or related field from a major academic institute
At least 8 years' experience as Physical Design Engineer
Experience with COT/ASIC physical design flow covering: Synthesis, Floor-planning, Place and Route (P&R), Clock Tree Synthesis (CTS), Parasitic Extraction, Static Timing Analysis (STA) and Timing Closure, Physical Verification, Power Analysis, Formal Verification, DFT/DFM and ATPG insertion/pattern generation
Deep sub-micron (28nm or below) process technologies
Industry standard design processes for deep sub-micron designs
Problem-solving and analytical skills
Practical use of scripting languages Tcl/Python/Perl etc.
Experience of at least one of the following EDA tool flows: Cadence or Synopsys
Communicating with other design teams, 3rd party IP and library suppliers and EDA tool vendors to improve scripts and tool flow
Managing/Interfacing to sub-contract design service providers

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8804049

שירות זה פתוח ללקוחות VIP בלבד

שמך המלאמה השם שלך?

מייל

תיאור

שליחה

תודה על שיתוף הפעולה

מודים לך שלקחת חלק בשיפור התוכן שלנו :)

המשרה נמחקה

תוכל לצפות בה בדף המשרות שלי

המשרה הוחזרה לרשימת תוצאות החיפוש

האם תרצה להסיר את המשרה מרשימת

המשרות השמורות שלך?

כן לא

אירעה שגיאה בשליחת פרטיך למשרה

חברת השמה / כח אדם

10/08/2026

Production Integration Engineer

חברה חסויה

Location: Rehovot

Job Type: Full Time

The Production team is looking for a Production Integration Engineer to join the integrated metrology line and work on state of the art tools in the semiconductor industry.
Your role will be to manufacture the company products while maintaining highest quality and on-time delivery.
As part of your job you will interact and work with the Engineering, R&D and QA departments to solve complicated on tool problems and test new tools and features as part of the transfer to production process.
Responsibilities
What will you be doing:
Lead tool manufacturing process from start to end (1-2 weeks project).
Integration of multidisciplinary systems (optical, electronic, pneumatic, computing, and mechanical) according to predefined procedures.
Ability to solve complex system challenges, constantly learning and striving to independence.
Working with engineering and R&D to address systems/production process challenges.
Addressing quality issues and repair recommendations for suppliers by nonconformance report.
Working in an organized way using digital procedures and flow management system.
Always striving to reduce cycle time and improve working process.
Helping and consulting team members to overcome challenges on their tools.

Requirements:
B.Sc. in Mechanical / Electrical Engineering or Practical Engineering diploma - a must.
Proved Hands-on capabilities with integration, calibration, and troubleshooting - a must.
Good computers skills (Mainly Office Apps) - a must.
Good English level (Reading and Writing) - a must.
Independent and self-Lerner - Ability to learn wide and in-depth technical information.
Good Team working and time management capabilities.
Experience in semiconductors - an advantage.
That special something you bring in:
Good verbal communication skills
Excellent interpersonal skills
Self- motivation.

This position is open to all candidates.

עדכון קורות החיים לפני שליחה

8775865

שירות זה פתוח ללקוחות VIP בלבד