לוח משרות דרושים

we are seeking an outstanding Senior Software & Systems Architect to join the NIC Software/Firmware Architecture group, focusing on next-generation Radio Access Network (RAN) platforms for 5G and 6G. You will help define and deliver innovative, scalable, high-capacity, and power-efficient networking solutions that support sophisticated AI acceleration and industry standardization across hardware and software stacks.
What youll be doing
Architect software and firmware stacks for SmartNICs tailored to the requirements of next-generation RAN workloads, including distributed, centralized, and small cell deployment scenarios.
Collaborate with hardware architects to define new features and robust SW-HW interfaces for diverse networking use cases.
Perform research and development in network protocols, high-performance networking, and network acceleration.
Extend and optimize networking drivers, offloads, and accelerators for enhanced performance and efficiency in RAN environments.
Drive standardization and interoperability to support broad industry adoption.

We are now looking for a Chip Design Engineer to join our Switch Silicon team for Verification / Design roles. As a Chip Design Engineer at our company's Networking business unit, you'll join a group of passionate engineers to design, implement and verify the next generation state-of-the-art Switch Silicon chips. In this position, you'll make a real impact in a dynamic, technology-focused company while developing the industry's best high-speed communication devices, delivering the highest throughput and lowest latency!
What You'll Be Doing:
Work in a combined design and verification team which develops some of the switch silicon core units.
Micro-architecture for RTL and simulation environment planning for units and modules.
Design/Verify RTL units/blocks according to Arch. specifications under challenging constraints with high orientation to power, area, and performance.
Build reference models, verify, and simulate chip blocks/entities according to specifications.
RTL synthesis, timing, supporting verification, and silicon post TO activities.
Work closely with multiple teams within organizations such as Architecture, Full chip Micro-Architecture, BE, and FW.

The company Networking Advanced Development Software team develops new groundbreaking technologies to enable new market shares for the company and tighten customer relationships. These are emerging technologies in networking and distributed computing for the booming AI factories and data centers. They span areas such as AI neural networks, Deep Learning, High Performance Computing (HPC), Storage, Cloud, SW Defined Network, Network Function Virtualization, 5G NR and more. We develop the solutions top-down, all the way from application behavioral analysis, to architecture definition and down to the implementation, using the world-leading company devices. The development traverses any needed component - application SW, middleware SW, OS kernel subsystems, device drivers, embedded SW (Firmware) and CUDA GPU. We collaborate with partners and key customers in the analysis processes and engage with open source communities introducing our leading features.
What youll be doing:
Design and implement solutions throughout all layers from high level application, OS and driver subsystem to firmware
Work on impactful projects involving state-of-the-art high-performance computing hardware and software
Provide insight and technical guidance and collaborate with peers from across the company - including software architecture, chip architecture, and engineering departments to improve our future technology
Collaborate with our company partners and customers.

The company Networking Advanced Development Software team develops new groundbreaking technologies to enable new market shares for the company and tighten customer relationships. These are emerging technologies in networking and distributed computing for the booming AI factories and data centers. They span areas such as AI neural networks, Deep Learning, High Performance Computing (HPC), Storage, Cloud, SW Defined Network, Network Function Virtualization, 5G NR and more. We develop the solutions top-down, all the way from application behavioral analysis, to architecture definition and down to the implementation, using the world-leading company devices. The development traverses any needed component - application SW, middleware SW, OS kernel subsystems, device drivers, embedded SW (Firmware) and CUDA GPU. We collaborate with partners and key customers in the analysis processes and engage with open source communities introducing our leading features.
What youll be doing:
Lead a team of 5 engineers in the advanced technologies development
Design and implement solutions throughout all layers from high level application, OS and driver subsystem to firmware
Work on impactful projects involving state-of-the-art high-performance computing hardware and software
Provide insight and technical guidance and collaborate with peers from across the company - including software architecture, chip architecture, and engineering departments to improve our future technology
Collaborate with our company partners and customers.

We are looking for an excellent Firmware Engineer to join the NIC Firmware team in the Yokneam site. The Firmware team develops cutting-edge networking features for cloud, HPC and storage. We drive the data growth of the worlds biggest companies. With talented engineers around the globe, the work environment is dynamic, meaningful and fast paced.
What You Will Be Doing:
Work closely with the architecture and different software design teams.
Implement new features in the core of our company NIC firmware.
Develop verification tests for advanced features in a highly complex and sophisticated Firmware testing environment.
Gain a deep understanding of system debug, networking technology and stacks, as well as the HW/FW/SW relationship.
You will learn how a big software project is operated, maintained, qualified and released, and how Hardware and Firmware are developed.

our company networking is a world-leader in building the most powerful supercomputers in the world which drive the AI and HPC industry. These rely on high performant network ASICs which connect GPUs at scale for efficient data transfer and compute.
We are looking for a hardware performance modeling architect to join our team and build a network simulator used for the design, optimization and exploration of our future networking chips. The role is cross-disciplinary, collaborating with hardware and software teams across the wider our company.
You will solve complex problems, develop innovative solutions and be instrumental in determining the architecture of our next generation networking solutions.
What you'll be doing:
Develop cycle-accurate simulation components to evaluate and analyze micro-architecture and architectural options for our next generation of switches.
Learn and understand the switch ASIC across all performance related aspects
Focus on switch hardware modeling.
Analyze and model the communication patterns of key DL, GAI inference and training applications.
Explore innovative ideas to improve and optimize our chip systems performance.

we are looking for a Senior Software Engineer to join the company DOCA SDK Verification team. The company DOCA SDK enables developers to rapidly create applications and services on top of our company BlueField data processing units (DPUs), leveraging industry-standard APIs. With DOCA, developers can deliver breakthrough networking, security, and storage performance by harnessing the power of our company's DPUs.
What you'll be doing:
Develop verification infrastructure in Python, tackling complex technical challenges, to ensure the robustness and correctness of DOCA Services
Engage in the full software development lifecycle of verification components, from design to implementation, and deployment
Write tests for verifying the functionality and performance of the DOCA platform
Debug and analyze complex system-level issues to identify root causes and ensure timely resolution.

Our HW team in Israel is looking for a Practical Hardware Test Engineer to join the Hardware Switch Group.
The team leads the development of networking infrastructure for our companys next-generation data centers, focusing on accelerated performance and optimized end-to-end GPU connectivity.
We are looking for a hands-on and detail-oriented Practical engineer with strong lab skills, who enjoys working in a dynamic, multidisciplinary environment.
What youll be doing:
Perform board bring-up, validation, and debugging activities in the lab
Operate lab equipment such as oscilloscopes, power supplies, logic/spectrum analyzers, and multimeters
Support hardware investigations by reading schematics, analyzing layouts, and completing test procedures
Document test results and communicate findings clearly to engineering teams
Work closely with electrical, mechanical, thermal, and system engineers throughout the development cycle.

We are looking for a hardworking and engaged Senior QA SW Engineer with experience in Networking to join the System Ethernet QA Team! Our QA team is responsible to test and qualify the company Ethernet Switches solutions. We learn new features, design, execute, write automation based on Python! we are widely considered to be one of the technology worlds most desirable employers. We have some of the most forward-thinking and hardworking people in the world working for us. If you're creative and autonomous, we want to hear from you!
What you'll be doing:
Review the Arch design and requirements for new features introduced in the product.
Design, develop, and execute tests for the new features, as part of SW GA releases and update releases.
Report bugs found during execution, assist with reproduction and debugs in order to understand root cause verify bug fixes provided by the R&D team, raise if not fixed.
Execute system tests in different scopes: regression, performance, functional, security for Ethernet protocols.
Write automation tests and framework APIs based on the Python language.

We are looking for a Junior Mechano-Optical Engineer! our company's GPUs and SOCs are the world leaders in performance and efficiency, and we are continually innovating in creative and unique ways to improve our ability to deliver extraordinary solutions in a wide range of sectors. We are seeking optical engineers who are passionate about what they do and are committed to making a difference in the world through their inventions. This position will collaborate with optical, opto-mechanical, and process engineers in the design and development of components that will drive our company products into a new technology era. Your responsibilities will include designing, testing and validating optical components and assembly platforms, selecting technology, and benchmarking solutions, all while keeping schedule and budget targets.
What you'll be doing:
Working on optical components for CPO applications
Design and design validation of optical test platforms and optical characterization stations.
Testing and characterization of optical components and optical connectors
Planning and building metrologies station for optical connectors
Design and design validation of optical elements (lenses, optical connectors, fiber array units etc.)
Collaborating with world-leading suppliers to develop high coupling efficiency components.

Our HW team in Israel is looking for a senior Mechanical validation manager to join the HW System qualification Group. The team leads the qualification of networking infrastructure for our company next-generation data centers focusing on accelerated performance while enabling optimized end to end GPU connectivity. our company's Networking division provides innovative InfiniBand and Ethernet solutions for various industries.
What you'll be doing:
Lead the Networking organization Mechanical validation activities.
Build custom Hardware Mechanical validation test plans for devices and component level qualifications.
Manage multiple Mechanical validation activities. Coach, develop, and mentor team managers. Conduct employee performance evaluations. Support other managerial tasks of team as needed.
Lead your team in applying Mechanical validation/test principles to build test plans and develop tools for validation.
Collaborate and integrate with all HW team: Board Design, Mechanics, Thermal, PCB Layout, Production, Software/Firmware, and more.
Support validation and approval of alternate/second source components for the devices. Build validation plan and then perform validation to qualify it.

We are now looking for a TensorRT-LLM Software Development Engineer!
we are hiring software engineers for its TensorRT-LLM team. Academic and commercial groups around the world are using GPUs to power a revolution in deep learning-powered AI, enabling breakthroughs in areas like LLM, ChatGPT and Generative AI that have put DL at the iPhone moment for AI. Join the team which is building the inferencing software which is foundational to product lines within our company and across the industry! The ability to work on a fast-paced delivery-focused team is required and excellent interpersonal skills are a must.
What you'll be doing:
Craft and develop robust inference software that can be scaled to multiple platforms for functionality and performance
Performance analysis, optimization, and tuning for Large Language Models (LLMs)
Conduct unit tests and performance tests for different stages of the inference pipeline.
Closely follow academic developments in the field of artificial intelligence and feature update TensorRT-LLM
Write safe, scalable, modular, and high-quality (C++/Python) code for our core backend software for LLM inference.
Collaborate across the company to guide the direction of deep learning inference, working with software, research and product teams.

we are looking for a passionate Software Engineer to join our Chip Design CAD team. In this role, you will experience the interesting junction of electrical and software engineering, when developing SW tools and solutions used to design the next generation Smart Adapters, Switches and GPUs for the advanced data centers across the world.
You will join us as a software engineer dedicated to the connectivity and reliability of our product ecosystem. Your focus will be engineering the integration layers that allow our CAD tools to seamlessly interact with the companys wider infrastructure and projects.
What you'll be doing:
Own the Integration Framework: Architect and maintain the Python-based framework connecting our CAD tools to the internal ecosystem, driving a code-first approach to automate delivery pipelines and integration events.
Cross-Team Compatibility: Collaborate with other engineering groups to design resilient interfaces, ensuring our tools remain compatible with the broader ecosystem as we release new features
Continuous Improvement: Proactively identify friction points in our current processes and implement software solutions to resolve them.

our company has continuously reinvented itself over two decades. Our invention of the GPU in 1999 sparked the growth of the PC gaming market, redefined modern computer graphics, and revolutionized parallel computing. More recently, GPU deep learning ignited modern AI the next era of computing. we are a learning machine that constantly evolves by adapting to new opportunities that are hard to seek, that only we can pursue, and that matter to the world. This is our lifes work, to amplify human creativity and intelligence. Make the choice to join us today.
What youll be doing:
Working closely with product design engineers, you'll perform PCB layout of high speed/high-density value-conscious PCBs for all business units at our company (GPU Desktop, Notebook, Automotive, Professional, Data Center, Deep Learning, and AI), all using Cadence PCB design tools.
Focus will be on the complete development of CAD layout from symbol creation, floor planning, and detailed component placement, constraints management, with a concept of topology and signal/trace integrity.
You will be responsible for the design releases required generation of artwork files, ODB++, and electronic PCB documentation.
Your designs will need to follow SI constraints, EMI/RFI control and FCC, UL and European regulations, IPC specifications and NRC regulations.