לוח משרות דרושים מהנדס אלקטרוניקה, לחיפוש זה נמצאו 298 משרות

Play a critical role in ensuring the functional integrity, performance, and reliability of next-generation optical chips.

Responsibilities
Develop robust verification plans for complex digital and mixed-signal optical chip designs.

Collaborate closely with architects, designers, and customers to understand logic requirements, translate them into verification strategies, and deliver clear, actionable feedback throughout the development process.

Perform netlist-level simulations with SDF back-annotation for timing-accurate verification

Support FPGA/ASIC bring-up and post-silicon validation as needed

Develop, maintain, and optimize testbenches and verification components using advanced SystemVerilog features, such as constrained random testing, assertions, and transaction-level modeling, to create robust coverage-driven environments.

Design scalable, reusable UVM-based environments and components (e.g., agents, monitors, scoreboards) for block- and system-level verification. Employ UVM to achieve regression automation, functional coverage closure, and high bug-detection efficiency.

Develop and execute verification strategies for digital blocks implementing or interfacing with PCI Express (PCIe). Apply protocol-checking, compliance validation, error injection, and debug skills for PCIe endpoints and root complex devices. Use protocol analyzers and simulation environments to validate correct implementation across all protocol layers.

Participate in the verification of RISC-V CPU cores and subsystems. Create test plans targeting processor modules (ALU, decoder, register file, control logic), with reference model comparisons, signature checks, and coverage of edge-case scenarios. Leverage formal verification and compliance suites for thorough design validation.

Plan and perform end-to-end ASIC verification, from block-level testbenches to full-chip integration. Execute functional and regression tests, formal verification, and coverage analysis. Debug and resolve design issues, ensuring pre-silicon reliability before manufacturing. Engage in design reviews and system-level protocol validation with cross-functional teams.

We are looking for a Board Design Engineer to join our team. In this role, you will be responsible for the end-to-end development of hardware boards, including schematic
design, component selection, PCB layout guidance, board bring-up, debugging, validation, and release to production.
Responsibilities:
Design and develop hardware boards for our products.
Create schematics and select components according to system requirements.
Guide PCB layout activities.
Perform board bring-up, debugging, testing, and validation.
Support product release to production.
Work closely with relevant teams throughout the development process.

We are looking for a hands-on, highly analytical System Failure Analysis Engineer to lead end-to-end investigations into complex product and manufacturing failures.

In this role, you will act as the technical owner of failure investigations-from the initial symptom and data analysis, through laboratory reproduction and multidisciplinary debugging, to root-cause identification, corrective actions, and final closure. The position combines hands-on laboratory work, system-level analysis, production support, and close collaboration with Hardware, Software, Firmware, Mechanical, Quality, NPI, and Manufacturing teams. You will investigate failures in advanced multidisciplinary systems that integrate electronics, optics, mechanics, embedded software, firmware, ASICs, PCBAs, and complex manufacturing and test processes.

Responsibilities

Lead end-to-end investigations of system and production failures, from initial symptom to root-cause identification and closure.
Perform hands-on debugging and failure reproduction in laboratory and production environments.
Analyze failures involving hardware, software, firmware, mechanics, optics, and manufacturing processes.
Work closely with R&D, Eng, Quality, and Manufacturing teams to define corrective actions.
Analyze production and test data to identify recurring failure trends and yield issues.
Support field-return, reliability, and manufacturing failure investigations.
Prepare clear technical reports and present investigation findings to relevant stakeholders.
Improve failure-analysis methods, tools, and documentation.

The ATE Systems Group leads the development of complex, multi-disciplinary capital equipment (software, hardware, optics, mechanics), automated machines designed for the calibration, testing and production of the cutting-edge LiDAR technology.

We are looking for a hands-on ATE System Technician to join our team. As part of the team, youll:

Bring-up multi-disciplinary setups & testers.
Execute complex system integration testing and experiments.
Support testing a variety of company's products.
Tester validation, verification, qualification, and certification.
Interact with multi-disciplinary systems and teams.
Write documentation, test plans, and results (English).

we are seeking an experienced EMC Engineer with the ability to understand complex systems to participate in the Qualification process for its revolutionary products.

What you'll do

Plan, coordinate, and perform EMC testing on full systems and components during the Design and Product Verification phase.
Influence hardware by recommending corrective actions at the PCB and system-level design, providing expert guidelines on grounding, shielding, filtering, etc.
Serve as a focal point in leading the analysis of EMC design requirements and findings at both the system and component levels
Based on collected data, determine if specifications, regulations, customers expectations, and acceptance criteria are satisfied - According to automotive and defense standards
Support the formation of technical reports, and be able to present conclusions to stakeholders

Do you want to help us build the DNA of tech.?
we are looking for a Maintenance Electronic Engineer to join our Maintenance Department. You will be for the maintenance of machines and equipment used in the production and distribution process of a company.
Job Location:
Dimona located in the southern part of Israel in the Negev, not far from the Dead Sea area, the lowest location in the world.
What you will be doing:
Maintain, develop, and improve equipment across the production floor.
Collaborate with R&D, engineering, maintenance, and production teams.
Provide service and support to maintenance and production departments.
Designing and developing new equipment (e.g., PCB boards) and participating in discussions.
Writing PLC programs and resolving communication issues.
Supporting equipment post-production transfer.
Enhancing existing equipment to improve efficiency or replace obsolete components.

Required RTL Design Technical Lead, Networking, Cloud
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As part of our Server Chip Design team, you will use your ASIC design experience to be part of a team that creates the SoC VLSI design cycle from start to finish. You will collaborate closely with design and verification engineers in active projects, creating architecture definitions with RTL coding, and running block level simulations.
In this role, you will contribute in all phases of Application-Specific Integrated Circuit (ASIC) designs from design specification to production. You will collaborate with members of architecture, software, verification, power, timing, synthesis, etc. to specify and deliver high quality SoC/RTL. You will solve technical problems with innovative micro-architecture and practical logic solutions, and evaluate design options with complexity, performance, power and area in mind.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Define the block level design documents such as interface protocol, block diagram, transaction flow, pipeline, and more.
Perform RTL development (e.g., coding and debug in Verilog, SystemVerilog, VHDL), function/performance simulation debug, and Lint/CDC/FV/UPF checks.
Participate in synthesis, timing/power, and FPGA/silicon bring-up.
Participate in test plan and coverage analysis of the block and SOC-level verification.
Communicate and work with multi-disciplined and multi-site teams.

ISI is looking for an experienced Embedded Software Engineer to join our software team. You’ll be the single owner of the software stack on one of our satellite programs - ground station through flight computer to payloads. The code, the builds, the CI, and the system integration are yours. You’ll work alongside hardware engineers during system bring-up and the wider software team day-to-day. We’re looking for someone who reads documentation and ships independently.

Responsibilities:

* Own the software stack across ground station, flight computer, and payloads
* Maintain Yocto-based payload software: build, package, deploy
* Write and maintain the embedded and host-side software
*  Integrate code contributions from adjacent teams and turn them into shippable software
* Partner with hardware engineers on system bring-up and integration
* Debug across hardware, kernel, and userspace
*  Write and maintain automated tests and technical documentation

Advantages:

* Background in defense or other embedded-system-of-systems environments
* Experience with constrained or resource-limited Linux platforms
* Docker / containerization experience
* Familiarity with embedded interconnect protocols (I2C, SPI, UART, RS422/485) and integrating drivers that use them

The position is responsible for the technical leadership as well as the team management of ATE test station development and automation SW infrastructure, from system architecture, test strategy, down to production. We are seeking a highly experienced professional with a strong background in RF, digital, and system-level testing, and with the ability to guide technical decisions, and mentor engineers on ATE methodologies, operation, and maintenance.


Team Responsibility
Design and develop Automated Test Equipment (ATE) for RF, digital, and mixed-signal products at board and system levels.
Technical definition and implementation of test strategies in collaboration with R&D, product engineering, and manufacturing teams.
ATE integration with software and firmware control as well as with automation systems.

We are looking for a senior HW Engineer to join the HW team to lead the design of Ramon.Space system hardware includes the development of cards and enclosures for compute, storage, and communication systems for space. Come explore space with us!


What You Will Be Doing:
Lead board design through all development stages: from definition to implementation, bring-up, qualification and final release.
Full responsibility for electrical specification, schematic design, components selection and layout considerations till board fabrication and assembly.
Extensive lab bring-up and debugging until the testing platform is efficiently implemented on the Production floor.
Combine an understanding of the electronics, FW and SW aspects into the accurate system architecture.
Collaborate with multidisciplinary R&D engineering teams.
Monitor environment testing.

We are looking for HW team leader to lead the design of Ramon Space system hardware including development of product cards and engineering boards of compute, storage and communication systems for space.


What You Will Be Doing
Lead a team of board designers through all development stages: from HW architecture definition to implementation, bring-up and final release.
Build , maintain, track, update detailed work plans for the team
Full responsibility for electrical specification, schematic design, components selection, SI/PI Simulation and layout considerations.
Extensive labs bring-up and proof of design until the HW design efficiently implemented in accordance with system requirements.
Combine understanding of the electronics, mechanics, FW and SW aspects into the accurate system architecture.
Work closely with system team and translate system requirements into high quality design and products
Collaborate with multiple R&D and Production groups: Mechanics, Software, NPI and system validation.