רובוט
היי א אי
stars

תגידו שלום לתפקיד הבא שלכם

לראשונה בישראל:
המלצות מבוססות AI שישפרו
את הסיכוי שלך למצוא עבודה

מהנדס חשמל

מסמך
מילות מפתח בקורות חיים
סימן שאלה
שאלות הכנה לראיון עבודה
עדכון משתמש
מבחני קבלה לתפקיד
משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP

חברות מובילות
כל החברות
כל המידע למציאת עבודה
לא מסתדרים עם הקולגות שלכם בעבודה?
תקשורת שעובדת בשבילך תמשיך לעבוד בשבילך לא רק ב...
קרא עוד >
טעויות נפוצות בניהול קריירה
הדרך לחיים של חוויות והזדמנויות עוברת דרך תכנון...
קרא עוד >
לימודים
עומדים לרשותכם
מיין לפי: מיין לפי:
הכי חדש
הכי מתאים
הכי קרוב
טוען
סגור
לפי איזה ישוב תרצה שנמיין את התוצאות?
Geo Location Icon

לוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Tel Aviv-Yafo
Job Type: Full Time
We are looking for some exceptional talent to join our Design and Engineering team as a System Platform Team Lead
Your Day to Day.:
Lead a multidisciplinary team of embedded SW, FPGA/logic, verification and software engineers
Own the system-level architecture and execution of various SoC-based camera processing and control platforms including Xilinx MPSoC
Oversee development across ARM A53/R5, Linux, bare metal, FPGA logic, HLS, micro-controllers, host software, interfaces and system integration
Lead implementation and validation of image-processing algorithms developed by the algorithm team
Drive technical planning, design reviews, integration, debugging, risk management and execution
Stay hands-on through selected complex or quality-critical tasks to maintain deep system understanding
Coordinate closely with algorithms, electronics, sensor and system teams
Requirements:
B.Sc. in Electrical Engineering or another relevant technical field
Senior-level experience in complex multidisciplinary systems, preferably in imaging or camera products
Experience leading engineering teams and driving execution
Strong system architecture background spanning embedded SW, FPGA/RTL, host-side software, HW/SW integration and interfaces
Experience with Xilinx Zynq / MPSoC or similar heterogeneous SoC platforms
Good understanding of Linux, bare-metal development, Verilog, Vivado/Vitis and FPGA development flows
Experience with Python and C++
Strong integration and debugging skills across hardware, FPGA and software
Experience with image/data processing pipelines and platforms such as PCs, Raspberry Pi or NVIDIA Jetson is an advantage
Excellent communication and cross-functional collaboration skills
Fluent in English, both verbal and written
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857551
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Tel Aviv-Yafo
Job Type: Full Time
We are looking for exceptional talent to join our team as a Hardware Engineer.
Your Day to Day:
Lead end-to-end hardware development, from architecture and design to testing and production
Design and develop complex electronic systems, including schematics, PCB layout guidance, and component selection
Drive system integration, bring-up, debugging, and validation processes
Collaborate with firmware, software, mechanical, and product teams to ensure seamless system performance
Identify technical risks and propose effective mitigation strategies
Support manufacturing, including design for manufacturability (DFM) and design for testability (DFT)
Analyze and improve system performance, reliability, and cost
Mentor junior engineers and contribute to team knowledge sharing
Requirements:
BSc or MSc in Electrical Engineering or a related field
7+ years of experience in hardware development in high-tech industries
Strong experience with analog and digital design
Proven track record of taking products from concept to production
Hands-on experience with lab equipment (oscilloscopes, spectrum analyzers, logic analyzers, etc.)
Experience with schematic capture and PCB design tools
Strong debugging and problem-solving skills
Ability to manage multiple projects in a dynamic environment
Experience with high-speed interfaces, RF systems, or sensor technologies
Hands-on experience with Altium Designer and familiarity with AMD SoC platforms - Advantage
Familiarity with embedded systems and firmware integration
Experience working with contract manufacturers and NPI processes
Knowledge of industry standards and compliance requirements
Fluent in English, both verbal and written
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857549
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Tel Aviv-Yafo
Job Type: Full Time
We are looking for some exceptional talent to join our R&D team as a System Engineer.
Your Day to Day:
Translation of Product Requirements to System Requirements
Definition of detailed requirements for sub-systems in a variety of domains (SW, Algo, HW, Electro-optics, Image sensor, Lasers, FW, mechanics, thermal)
Hands-on work with all groups in R&D, Product, PM, Quality, and Operations to ensure compliance with all system requirements
Plan and design system integration test scenarios and V&V process
Research and analysis of system limitations for coming up with the best-performing product
Lead risk management and DFMEA processes
Requirements:
Self-driven, hands-on problem solver with strong technical judgment
Team player with excellent interpersonal and communication skills
Strong technical background in electro-optics, including imaging systems, optical sensors, lasers and illumination, or related photonic technologies
At least 4 years of experience in multidisciplinary system engineering, with significant hands-on experience in the design, integration, characterization, and testing of electro-optical systems
Strong system-level understanding and hands-on experience across optics, electronics, control, embedded computing, and algorithms, including building and debugging complex multidisciplinary systems
Python and/or C proficiency is an advantage
BSc in Electrical Engineering, Physics, Electro-Optics, or a related field. MSc/ME is preferred
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857542
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Yokne'Am Illit
Job Type: Full Time
We are looking for an NPI Engineer for the R&D team. The NPI Engineer will own the end-to-end transition of multidisciplinary medical devices from R&D prototypes to stable, scalable serial production, serving as the bridge between product development and Operations.
If you want to work in an innovative, international environment and help push the boundaries of healthcare, well-being, and energy-based technology, this is your opportunity
Key responsibilities:
Lead the full NPI and design-transfer process from R&D handoff through pilot builds, qualification, production ramp-up, and stabilization.
Build and drive transfer plans, schedules, risk and action tracking, production-readiness criteria, and release gates.
Create and maintain the manufacturing package, including BOM/DMR content, drawings, work instructions, test methods, acceptance criteria, tooling, and training materials.
Lead DFM, DFA, and DFT reviews and drive design and process improvements that support quality, manufacturability, serviceability, and cost.
Define, develop, and qualify manufacturing processes, fixtures, equipment, and test setups; prepare and execute validation protocols where applicable.
Lead ECOs and configuration changes, and provide hands-on support for production, yield, quality, field, and obsolescence issues using structured root-cause and corrective-action methods.
Serve as the technical focal point across R&D, Operations, QA/RA, Supply Chain, Service, suppliers, subcontractors, and contract manufacturers.
Requirements:
B.Sc. in Mechanical, Electrical, Biomedical, Mechatronics, or a related engineering discipline.
At least 3 years of experience in NPI, manufacturing engineering, product engineering, or design transfer for multidisciplinary products.
Proven experience supporting pilot and serial production and developing or improving manufacturing processes.
Experience with engineering documentation, BOM/DMR structures, ECO/CO processes, and PLM/PDM and ERP systems.
Strong hands-on troubleshooting, root-cause analysis, and structured problem-solving skills.
Ability to read and interpret engineering drawings, specifications, and technical documentation; SolidWorks experience is preferred.
Fluent Hebrew and English, written and spoken; medical-device or other regulated-industry experience is an advantage.
Education & Experience - Relevant engineering degree and 3+ years of experience in multidisciplinary product industrialization.
Product & Business Acumen - Understands how design choices affect product quality, supply continuity, serviceability, cost, and time to market.
Execution & Leadership - Owns deliverables end to end, prioritizes effectively, and leads cross-functional actions without direct authority.
Communication & Collaboration - Builds strong working relationships and communicates status, risks, and decisions clearly across functions and sites.
Other Requirements - Comfortable working in a dynamic, global, matrix organization and providing hands-on support when needed.
Self-Starter & Problem-Solver - Proactive and resourceful; turns ambiguous technical issues into structured, evidence-based action plans.
Detail-Oriented & Analytical - Uses data, documentation discipline, and sound engineering judgment to ensure repeatable and compliant execution.
Technical Skills - Manufacturing documentation, DFM/DFA/DFT, ECO ad configuration control, RCA, process validation, PLM/PDM/ERP, and CAD/SolidWorks.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857513
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
The Staff Machine Learning Engineer is a senior technical leader responsible for designing, developing, and deploying production-grade AI systems for our company medical imaging products. This role focuses on vision-language models, diffusion models, and multimodal learning, working closely with data scientists, software engineers, product leaders, and clinical experts to turn advanced AI methods into robust product capabilities.
Key Responsibilities
Design, implement, and productionize AI models for clinical applications, including vision and diffusion models.
Own end-to-end model lifecycle: data ingestion, training, evaluation, deployment, monitoring, and iteration.
Work with large-scale medical datasets, ensuring data quality, preprocessing, and efficient pipeline management.
Drive technical decisions and tradeoffs with a focus on scalability, maintainability, and real-world constraints.
Collaborate with clinical AI scientists to translate research innovations into production-ready solutions.
Stay current with advancements in vision-language modeling, GenAI, and related AI technologies.
Requirements:
Masters or PhD in Computer Science, Electrical Engineering, Biomedical Engineering, or related field.
Significant hands-on experience building and deploying ML systems to production.
Strong experience with machine learning and deep learning frameworks (e.g., PyTorch, TensorFlow).
Solid understanding of deep learning, computer vision, and natural language processing techniques.
Prior experience working with medical imaging data is highly preferred.
Solid software engineering fundamentals, including testing, version control, CI/CD, and code reviews.
Independent, self-learner, and results-oriented.
Fluent English (speaking and writing).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857512
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
We are looking for a Senior Electrical Engineer to join our Sustaining Engineering team and play a key role in supporting the ongoing evolution of our company's innovative cancer treatment systems.
In this role, you will lead electrical engineering activities across design transfer and sustaining engineering, ensuring our products successfully transition from development into manufacturing while maintaining the highest standards of quality, reliability, manufacturability, and regulatory compliance.
Working closely with R&D, Manufacturing, Quality, and external suppliers, you will combine hands-on engineering with technical leadership to drive robust product solutions throughout the product lifecycle.
This is an excellent opportunity for an experienced engineer who enjoys solving complex technical challenges, mentoring others, and collaborating across multidisciplinary teams to bring life-changing medical technologies to patients worldwide.
What you will do:
Lead electrical engineering activities for Design Transfer and Sustaining Engineering projects.
Provide technical leadership and mentorship to electrical engineers within the DT & Sustaining Engineering team.
Serve as the company's subject matter expert for electrical design, supporting Design Transfer and Production activities.
Lead the transfer of electrical designs from R&D into manufacturing, ensuring manufacturability, quality, and reliability.
Partner with R&D teams to provide Design for Manufacturing (DFM) recommendations early in the development process.
Maintain and improve PCB and electrical board designs to support product robustness, manufacturability, and cost-effectiveness.
Define electrical project requirements, timelines, and budgets.
Generate and maintain complete production documentation, including PCB documentation, PCBA files, BOMs, assembly drawings, and work instructions.
Work closely with suppliers and manufacturing subcontractors throughout the product lifecycle.
Perform hands-on electrical design, testing, validation, and troubleshooting.
Develop and execute electrical test procedures and generate technical documentation and test reports.
Lead electrical design reviews and provide technical guidance to cross-functional teams.
Requirements:
B.Sc. in Electrical Engineering (required)
M.Sc. in Electrical Engineering (advantage)
Minimum of 5 years of experience in electrical engineering within the medical device industry
Strong knowledge of medical device standards and electrical safety requirements
Minimum of 5 years of experience in digital circuit design, with basic knowledge of analog circuit design
Proven experience leading electrical projects from concept through manufacturing
Experience working with PCB design and layout tools, including Altium
Hands-on experience using laboratory test equipment, including oscilloscopes, logic analyzers, spectrum analyzers, and function generators
Strong technical, analytical, and problem-solving skills
Excellent communication skills in English, both written and verbal
Proficiency with Altium and Microsoft Office
Who you are:
A hands-on engineer who enjoys solving complex technical challenges.
A collaborative team player who thrives in cross-functional environments.
A technical leader who enjoys mentoring and supporting other engineers.
Organized and capable of balancing multiple projects and priorities.
Passionate about delivering high-quality engineering solutions that make a meaningful impact on patients' lives.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857502
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Haifa
Job Type: Full Time
We are looking for a talented V&V Manager who will build and lead the verification and validation strategy for complex defense systems, ensuring our technologies meet the highest standards of reliability, performance, and operational readiness.

What You Will Do
Hold final Go/No-Go authority for all major releases and customer deliverables, based on predefined quality thresholds and readiness criteria.
Own end-to-end V&V execution, including delivery milestones, resource planning, KPIs, and day-to-day operational performance.
Build and scale structured testing infrastructure: test plans, traceability, formal procedures, regression suites, and automation frameworks.
Increase automation coverage and reduce manual dependency through measurable quarterly improvement targets.
Lead multidisciplinary verification and validation activities, including in-house integration testing, field validation, pilot deployments, and adversarial scenario testing.
Partner with R&D to embed lifecycle quality gates and remain hands-on in system-level testing, debugging, and high-risk validation efforts during scaling phases.
Requirements:
Who You Are:
You are a systems-level testing leader who understands that lab success does not guarantee operational survivability. You think in terms of failure modes, edge cases, and adversarial conditions, and you operate fluently across hardware, software, and system integration domains.
You combine ownership with execution. You can define measurable quality KPIs, build scalable testing infrastructures, and personally analyze complex system failures when required. You are direct, objective, and independent enough to enforce Go/No-Go decisions when predefined quality thresholds are not met.
You view automation as a force multiplier and design organizations accordingly. You build teams, processes, and infrastructure that scale without sacrificing agility.

Requirements:
Minimum 5 years of leadership experience in testing complex multidisciplinary systems.
B.Sc. in Engineering in a relevant field (Electrical Engineering, Computer Science, Aerospace Engineering, or equivalent).
Demonstrated ownership of system-level qualification and formal release sign-off processes.
Proven experience designing and executing operational test scenarios that replicate real-world and adversarial environments.
Experience building and managing multidisciplinary testing teams.
Strong communication skills, including structured reporting and decision-making under delivery pressure.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857104
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Haifa
Job Type: Full Time
Were looking a System Test Automation Engineer to drive system-level (HW+SW) verification for our products.

As a System Test Automation Engineer, youll architect and implement automation that exercises complex, integrated systems, not just software layers. Youll design tools and frameworks that interact with real hardware, real sensors, and real signals.

Key Responsibilities
Design and build automation frameworks for testing multidisciplinary systems including RF, sensors, and embedded hardware
Develop test scripts that connect to real hardware through various interfaces (serial, Ethernet, GPIO, APIs)
Perform both manual and automated testing, developing test plans based on real-world use cases and edge conditions
Debug hardware and software issues
Build internal testing tools (log analyzers, simulators, etc.) and create reusable testing components for data capture, validation, etc.
Requirements:
B.Sc. in Computer Science, Electrical Engineering, or related field.
3+ years in automation development and 2+ years building test infrastructure.
Strong Python programming skills and proficiency in Linux, shell scripting, and system diagnostics.
Experience with automation frameworks (UI and backend) and QA/system-integration testing processes.
Hands-on experience with hardware interfaces (TCP/UDP, serial protocols, USB, embedded communication).
Experience with hardware-in-the-loop, embedded platforms, or RF/GNSS systems - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857090
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Haifa
Job Type: Full Time
We are seeking an experienced Senior Real-Time Embedded Software Engineer to join our core engineering team and develop advanced software for high-performance, mission-critical embedded systems.

Key Responsibilities
Own tasks, infrastructure, and subsystems end-to-end, from requirements analysis and system modeling through design, implementation, testing, integration, and deployment.
Design, implement, integrate, and optimize real-time software for MCU-based platforms.
Translate system-level requirements into robust and efficient software solutions.
Lead software integration and validation on target platforms, including troubleshooting and system bring-up.
Contribute to the development and improvement of software infrastructure and platform-level capabilities.
Work closely with Hardware, Algorithms, and System Engineering teams within a multidisciplinary R&D environment.
Collaborate with relevant stakeholders to drive tasks and projects forward efficiently.
Requirements:
Requirements
B.Sc. in Computer Science, Electrical Engineering, or equivalent relevant experience.
5+ years of hands-on experience developing embedded software in Modern C++.
Proven experience developing real-time software using RTOS and/or Bare-Metal on MCU-based platforms.
Strong understanding of real-time software design principles, multitasking, synchronization, interrupt-driven programming, memory management, and deterministic systems.
Experience with low-level hardware bring-up, device drivers, and embedded communication protocols such as UART, SPI, I²C, CAN, Ethernet, or USB.
Strong debugging and root-cause analysis skills using embedded development and lab tools.
Excellent analytical and problem-solving skills with a strong technical mindset and attention to software quality.
Ability to work independently while taking ownership of complex technical challenges.
Strong communication and collaboration skills, with the ability to work effectively in multidisciplinary teams.
Team player with a proactive, can-do attitude and a passion for engineering excellence.

Advantages
Experience developing software on Linux-based systems.
Experience designing scalable, modular real-time software architectures.
Background in the Defense, Aerospace, Autonomous Systems, or UAV/Drone industry.
Experience with sensor integration, navigation, control systems, communication stacks, or mission-critical embedded applications.
Familiarity with Git, CI/CD pipelines, automated testing, and modern software development practices.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857047
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
מיקום המשרה: מרכז
סוג משרה: משרה מלאה
דרוש/ה הנדסאי/ת חשמל / מהנדס/ת חשמל - מתח גבוה.
שכר עד 20,000-21,000 בהתאם לניסיון ולכישורים | רכב צמוד!
לחברה מובילה ויציבה בתחומה דרוש/ה הנדסאי/ת או מהנדס/ת חשמל לתפקיד שטח מקצועי ומאתגר בפריסה ארצית.
תיאור התפקיד:
איתור, אבחון וטיפול בתקלות במערכות חשמל במתח גבוה ונמוך.
ביצוע עבודות אחזקה שוטפת ומונעת.
מתן שירות ומענה טכני מקצועי ללקוחות החברה.
עבודה עצמאית בשטח ופתרון תקלות מורכבות.
נכונות לשעות עבודה לא שגרתיות ולסופי שבוע בהתאם לצורך.
תנאי העסקה:
שכר מתגמל - ניתן להגיש מועמדות גם עם ציפיות שכר של 20,000-21,000.
רכב צמוד.
עבודה מקצועית ומגוונת בחברה יציבה.

לפרטים ושליחת קורות חיים בטלפון.
דרישות:
תעודת הנדסאי/ת או מהנדס/ת חשמל - חובה.
רישיון חשמלאי מתח גבוה - חובה!
רישיון חשמלאי מוסמך / ראשי - חובה.
ניסיון מוכח בעבודה עם מערכות חשמל במתח גבוה ונמוך - חובה.
ניסיון באחזקה שוטפת ומונעת ובאיתור תקלות.
יכולת עבודה עצמאית, אחריות ויכולת טכנית גבוהה.
נכונות לעבודת שטח בפריסה ארצית ולזמינות גבוהה.
תודעת שירות גבוהה ויחסי אנוש מצוינים.
ניסיון במערכות בקרה ותקשורת - יתרון. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
8856552
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
מיקום המשרה: מרכז
סוג משרה: משרה מלאה
חברה גלובלית המתמחה בתכנון, פיתוח והקמה של מחסנים וחניונים אוטומטיים מגייסת מתכנן.ת חשמל. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8856534
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Merkaz
RF integrator / Practical Engineer.
Location: Center District, Israel.
Type: Full-time / Student position.
About the Role:
We are seeking a skilled, hands-on RF integrator / Practical Engineer to join our development team. This role is ideal for someone who thrives on the bench, working on a state-of-the-art system spanning RF and cybersecurity.
Key Responsibilities
Multidisciplinary Collaboration: Join an engineering team developing a complex RF and cyber system, from RF Front-End through DSP to system control.
Lab Integration: Serve as the team's lab integrator - bring up RF components, circuits, and subsystems on the bench, integrate them into larger assemblies, and troubleshoot down to root cause.
Validation & Testing: Perform hands-on validation and testing using standard lab equipment (VNA, spectrum analyzer, signal generator, oscilloscope).
SDR Support: Support SDR -based signal processing and development, including IQ capture and analysis.
Design Input: Provide hands-on engineering input that directly shapes design decisions.
Field Support: Conduct field trials and customer-facing technical activities as needed.
Requirements:
Requirements
Education: Practical Engineer diploma in Electronics/Electrical Engineering (or a related field) OR currently studying toward a B.Sc. in EE (3rd-4th year).
Experience: At least 2 years of hands-on RF lab, integration, or TEST experience (or equivalent lab experience for students).
Equipment Proficiency: Working knowledge of standard lab equipment (VNA, spectrum analyzer, signal generator, oscilloscope).
Problem Solving: Strong fault-isolation and troubleshooting skills - able to diagnose and resolve issues independently.
Mindset & Skills: Practical, detail-oriented approach with good communication and documentation skills.
Clearance: Eligible for security clearance.
Advantages
Experience with SDR platforms.
TEST automation / scripting (e.g., Python ) for RF TEST benches.
Comfortable working across a mixed hardware/software stack (FPGA-based boards, development kits, and Linux ).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8856371
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
14/10/2026
Location: Kefar Sava
Job Type: Full Time
We are looking for an experienced control engineer to join our multidisciplinary R&D department and contribute to the development, integration, and testing of advanced electro-optical systems.
:Responsibilities
Develop and implement control and stabilization algorithms. Model and analyze dynamic systems using MATLAB/Simulink. Generate control SW from Simulink models and support its integration into Embedded software. Participate in system integration, simulations, laboratory experiments, and field tests. Analyze system performance and support troubleshooting and root-cause analysis. Collaborate with software, electronics, mechanical, systems, and production teams. Support products throughout development and production.
Requirements:
:Requirements
B.Sc. in Mechanical, Aeronautical, Electrical, or a related engineering discipline. 3 years of relevant control-engineering experience. Good knowledge of classical control, dynamic- system modeling, stabilization control, and time and frequency domain analysis. Practical experience with MATLAB/Simulink and model-based design. Hands-on experience in developing, navigating, and debugging C code is required. Hands-on experience in integrating Simulink-generated code into Embedded C software is required. Familiarity with motion-control and stabilization sensors, including IMUs, gyroscopes, and encoders. Strong analytical and problem-solving skills. Ability to work independently and as part of a multidisciplinary team.:Advantages Experience with motion-control, stabilization, or electro-optical systems. Familiarity with Real-Time Embedded systems or hardware-in-the-loop testing. Experience with motors, microcontrollers, communication protocols, or laboratory equipment. Knowledge of signal processing, observers, Kalman filtering, system identification, loop shaping, or tracking algorithms. Experience in the defense industry.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8856359
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
13/10/2026
Location: Haifa
Job Type: Full Time
This is a unique opportunity to join a company at a pivotal growth stage and help shape its products, culture, and future.

DART is an autonomous counter-drone system: a standalone system and a radar-cued ground station launch small interceptor drones that acquire an airborne target with a thermal seeker and defeat it by direct impact. The interceptor is built on a COTS high-agility racer platform, with Betaflight closing the inner rate loop and a mission computer running perception and outer-loop guidance.

You will own the two disciplines that determine whether the interceptor actually hits: guidance and control law design, and the simulation environment used to develop, validate, and regression-test those laws before anything flies. This is a hands-on leadership role - you are expected to write and tune code, sit in front of flight logs, and stand in the field on test days, while also setting technical direction for a small team.

Key Responsibilities
Own outer-loop guidance (image-based thermal aim, pursuit/proportional-navigation, latency-compensated LOS, and throttle management) and manage end-to-end latency and stability budgets.
Implement and tune controllers (from PID/PI to adaptive/MPC), define flight controller interfaces (MSP/CRSF/SBUS injection), and govern the flight-mode state machine, failsafes, and safety envelope.
Deliver the 6-DOF simulation product (interceptor/target dynamics, thermal seeker), maintain SIL/HIL rigs for unmodified production code, validate models against flight data, and run automated regression suites and KPIs.
Lead and mentor the control and simulation team, set test-progression gates (sim to full-envelope flight), collaborate closely with Vision and Systems Engineering, and produce all required technical artifacts.
Requirements:
B.Sc. in Aerospace, Electrical, Mechanical Engineering, or Applied Math/Physics.
5+ years designing and flight-proving guidance, navigation, or control systems on real hardware - not simulation-only experience.
Strong practical control theory: state-space and classical design, stability margins, discrete-time implementation, cascaded loop architecture, and the failure modes of each.
Demonstrated experience with state estimation (Kalman/EKF) and sensor fusion.
Strong Python; C/C++ for real-time or embedded targets.
Hands-on experience building or heavily extending a physics-based simulation (PyBullet, Gazebo, MuJoCo, Simulink, or in-house) and validating it against measured data.
Multirotor experience: flight dynamics, PX4/ArduPilot/Betaflight, tuning, and reading flight logs to diagnose control problems.
Comfortable owning safety-critical decisions on a fast, dangerous airframe, and saying "not yet" when the data doesn't support the next test.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8855363
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
13/10/2026
מיקום המשרה: תל אביב יפו
סוג משרה: משרה מלאה
לחברה העוסקת בתכנון מתקני חשמל בפרויקטים מגוונים, דרוש/ה מהנדס/ת חשמל להשתלבות בצוות התכנון.
העבודה מתבצעת במשרדי החברה בבאר שבע / ו/או בסניף החברה בתל אביב בסביבת עבודה מקצועית ומתקדמת.
חלק מהפרויקטים יבוצעו מול משרדינו בבוקרשט.
במסגרת התפקיד:
תכנון מתקני חשמל וליווי הפרויקט משלב התכנון ועד הביצוע.
ביצוע שרטוטים ב-AutoCAD ומידול ב REVIT.
השתתפות בפגישות תיאום ותכנון (בזום ובמשרדי הלקוחות).
יציאה לשטח וביצוע פיקוח עליון באתרים במידת הצורך.
דרישות:
תואר ראשון בהנדסת חשמל - חובה.
רישום בפנקס המהנדסים - חובה.
ידע / היכרות עם תוכנות AutoCAD ו REVIT.
ניסיון קודם בתכנון חשמל המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8854506
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות שנמחקו