רובוט
היי א אי
stars

תגידו שלום לתפקיד הבא שלכם

לראשונה בישראל:
המלצות מבוססות AI שישפרו
את הסיכוי שלך למצוא עבודה

מהנדס חשמל

מסמך
מילות מפתח בקורות חיים
סימן שאלה
שאלות הכנה לראיון עבודה
עדכון משתמש
מבחני קבלה לתפקיד
משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP

חברות מובילות
כל החברות
כל המידע למציאת עבודה
לא מסתדרים עם הקולגות שלכם בעבודה?
תקשורת שעובדת בשבילך תמשיך לעבוד בשבילך לא רק ב...
קרא עוד >
טעויות נפוצות בניהול קריירה
הדרך לחיים של חוויות והזדמנויות עוברת דרך תכנון...
קרא עוד >
לימודים
עומדים לרשותכם
מיין לפי: מיין לפי:
הכי חדש
הכי מתאים
הכי קרוב
טוען
סגור
לפי איזה ישוב תרצה שנמיין את התוצאות?
Geo Location Icon

לוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/10/2026
מיקום המשרה: אשדוד
סוג משרה: משרה מלאה
מהנדסי/ות תקשורת אלחוטית - השמיים הם רק ההתחלה!
למפעל מוביל בתחום כלי הטיס דרוש/ה מהנדס/ת תקשורת אלחוטית לכטבם!
מיקום: אשדוד.
משרה מלאה מהמשרד | ללא היברידיות.
מה בתפקיד?
אפיון ופיתוח מערכות תקשורת LOS/BLOS.
שילוב ובדיקות מערכות תקשורת מתקדמות.
הובלת ניסויים ועבודה מול ספקים ולקוחות בארץ ובחו"ל.

שליחת קוח למייל.
דרישות:
דרישות חובה:
תואר B.Sc. בהנדסת חשמל ואלקטרוניקה / מערכות / מדעי המחשב.
לפחות 5 שנות ניסיון בתקשורת אלחוטית.
ידע בתקשורת LOS או לוויינית.
ידע באפנון, קידוד, הצפנה ותקשורת ספרתית.
ידע ב- RF, אנטנות ו-TCP/IP - יתרון! המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8863209
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/10/2026
סוג משרה: משרה מלאה
לחברת בלובירד אירו סיסטמס, המתמחה בפיתוח, ייצור והפעלה של מל"טים טקטיים מתקדמים, דרוש/ה מהנדס/ת מערכת להובלת פיתוח מערכות מוטסות מולטי-דיסציפלינריות מתקדמות. התפקיד כולל אחריות הנדסית רחבה והובלת הפיתוח מקצה לקצה – משלב הגדרת הדרישות והארכיטקטורה, דרך התכן, המימוש והאינטגרציה, ועד לניסויי טיסה, אימות ביצועים ומסירה ללקוח. אנו מחפשים מהנדס/ת בעל/ת ראייה מערכתית רחבה, יכולת הובלה טכנית, חשיבה עצמאית וגישה מעשית לפתרון אתגרים הנדסיים מורכבים. תחומי אחריות • הובלה טכנית ומערכתית של פרויקטי פיתוח, משלב הקונספט ועד למסירת מערכת מבצעית. • גיבוש ארכיטקטורת מערכת, אפיון דרישות מערכתיות והגדרת ממשקים בין תתי-מערכות. • הובלת תהליכי התכן והמימוש מול צוותי פיתוח רב-תחומיים, לרבות חומרה, תוכנה, מכניקה, אווירונאוטיקה, אינטגרציה וניסויי טיסה. • קבלת החלטות הנדסיות, ניהול פשרות תכן (Trade-offs) ופתרון אתגרים מערכתיים מורכבים. • הובלת סקרי תכן ותהליכי אימות ותיקוף (V&V) לאורך מחזור הפיתוח. • תכנון, הובלה וניתוח של ניסויי מערכת, ניסויי קרקע וניסויי טיסה. • ניתוח תקלות, חקר ביצועי מערכת והובלת שיפורים ופתרונות הנדסיים.
דרישות:
דרישות חובה • תואר ראשון בהנדסת חשמל ואלקטרוניקה / תוכנה / אווירונאוטיקה / מכונות או תחום הנדסי רלוונטי. • לפחות 3 שנות ניסיון בפיתוח מערכות מולטי-דיסציפלינריות, לאורך שלבי התכן, המימוש והאינטגרציה. • ניסיון בהנדסת מערכת, הגדרת דרישות, ארכיטקטורה וממשקים מערכתיים. • יכולת מוכחת להובלת תהליכי פיתוח ועבודה מול צוותי הנדסה ממגוון תחומים. • גישת Hands-On וניסיון מעשי בביצוע ניסויים, ניתוח נתונים, סימולציות, פיתוח כלי בדיקה או אוטומציה. • ראייה מערכתית מצוינת, יכולת ניתוח ופתרון בעיות מורכבות, עצמאות ויוזמה. • יכולות בין-אישיות גבוהות ויכולת עבודה אפקטיבית בצוותים רב-תחומיים. • שליטה גבוהה באנגלית, בעיקר בכתב. יתרונות • ניסיון בפיתוח פלטפורמות מוטסות, מל"טים או מערכות אוטונומיות. • ניסיון בפיתוח מערכות בקרת טיסה, ניווט, לוגיקות טיסה או יכולות אוטונומיות. • ניסיון בפיתוח מערכות חשמל והספק, ניהול אנרגיה, חלוקת מתח או מערכות הנעה חשמליות. • ניסיון בהובלת אינטגרציות מערכתיות וניסויי טיסה. • היכרות עם תקנים ותהליכי פיתוח תעופתיים, אזרחיים או צבאיים. הזדמנות להוביל פיתוח מערכות מל"ט חדשניות, לשלב בין תכנון הנדסי לעשייה מעשית ולהיות שותף/ה מרכזי/ת בהבאת מערכות מתקדמות משלב הרעיון ועד לטיסה מבצעית. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8863038
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/10/2026
מיקום המשרה: אשקלון
סוג משרה: משרה מלאה
דרוש/ה מהנדס/ת חשמל - מנהל /ת תפעול בחברה סולארית צומחת, עם רכב צמוד
אשקלון (משרדים), עם פרויקטים בכל הארץ
תוביל/י את כל מערך ההתקנות והתחזוקה בשטח: צוותים, מנהלי פרויקטים וקבלני משנה.
תהיה/י הכתובת המקצועית לבקרת תכנון מערכות PV ולפתרונות בזמן אמת.
משרה מלאה ורכב צמוד.
דרישות:
מה צריך: רישיון מהנדס/ת חשמל בתוקף, 3 שנות ניסיון לפחות בניהול תפעול או התקנות בתחום הסולארי, רישיון נהיגה. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8862974
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Yokne'Am Illit
Job Type: Full Time
We are pioneering the future of medical diagnostics with our innovative capsule endoscopy solutions. Imagine a world where diagnosing gastrointestinal conditions is as simple as swallowing a pill which captures with imagers and different sensors the digestive system and transmit it in real time. Our cutting-edge technology not only makes this possible but also revolutionizes the patient experience, providing a non-invasive, accurate, and efficient diagnostic tool. We are seeking a dynamic and visionary Analog and RF engineer to join our dedicated team, driving the development and integration of our next-generation capsule endoscopy devices.
As a Senior Analog & RF Engineer specializing in capsule endoscopy development, you will play a key role in the design, development, and integration of the critical analog and RF communication path between the capsule, located inside the patients digestive system, and the external recorder worn by the patient.
You will be responsible for developing high-performance, low-power analog and RF solutions that enable reliable wireless communication, contributing directly to the performance and advancement of our next-generation medical devices.
In this critical role, you will collaborate closely with System Engineers, PCB design and Layout, Firmware Developers, Modem Algorithm Engineers, and Mechanical Design teams to develop and integrate advanced solutions across the system. You will work in a highly collaborative, open-minded environment that encourages new ideas, creativity, and innovation, contributing to cutting-edge medical technology that enhances patient care.
Primary responsibilities:
Own and drive the Analog & RF communication path from architecture definition through detailed design.
Work closely with leading semiconductor suppliers and technology partners on a system on Chip definition, development, and integration of custom IC/ASIC solutions, contributing to system architectural decisions and ensuring alignment with system-level requirements.
Research, evaluate, and define communication receiver and transmitter architectures, including Zero-IF, Low-IF/NZ-IF, Superheterodyne, and other relevant architectures, based on system requirements and product constraints.
Perform system-level RF and Analog analysis, including noise budget, link budget, dynamic range, sensitivity, linearity, distortion, interference, and overall communication-channel performance.
Develop simulation models and methodologies to evaluate communication-channel performance and validate architectural and design decisions prior to hardware implementation.
Design and specify the Analog transmitter and receiver signal paths, including filtering, amplification, gain stages, matching networks.
Analyse and optimize antenna design and RF performance, including antenna matching, efficiency, radiation characteristics, impedance, and interaction with the capsule and surrounding biological environment.
Drive a system on chip designs from proof-of-concept and laboratory prototypes into production-ready medical devices.
דרישות:
BSc \ MSc in Electrical Engineering.
7+ years of hands-on experience in very Low power Analog and RF engineering, preferably in wireless communication systems, RFICs, or mixed-signal systems; Familiarity with SoC/mixed-signal architecture, including considerations for integrating analog, RF, digital, and power-management functions.
Strong understanding of RF and analog communication architectures, including Zero-IF, Low-IF/NZ-IF, Superheterodyne, and related receiver/transmitter architectures; Proven experience with analog/RF transmitter and receiver design, including filters, amplifiers, LNAs, PAs, mixers, matching networks, and signal-conditioning circuits; Strong understanding of PCB-level RF implementation, including layout, grounding, shielding, power integrity, signal integrity, and RF isolation.
Preferred Qualifications:
Experience in writing design and technical specifications.#EN המשרה מיועדת לנשים ולגברים כאחד.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8862957
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/10/2026
מיקום המשרה: כוכב יאיר צור יגאל
סוג משרה: משרה מלאה
ניהול והוצאה לפועל של כלל עבודות החשמל והאלקטרו-מכאניקה בהקמת תחנת משנה (תחמ"ש) במתח עליון. התפקיד כולל ניהול צוותים וקבלני משנה בשטח, עבודה מול הגורמים המתכננים וחברת החשמל/נגה, ועמידה בלוחות זמנים, איכות ובטיחות מחמירים.
דרישות:
דרישות התפקיד: רישיון חשמלאי: חשמלאי מוסמך / ראשי / מוסמך מתח גבוה (רישיון חשמלאי הנדסאי) יתרון משמעותי ניסיון מקצועי: ניסיון של לפחות שנתיים כמנהל מוביל בחשמל בפרויקטי תשתיות, תחמ"שים או מתקני מתח גבוה. הסמכות: הסמכה לעבודה בגובה, במתח גבוה (היתרון) ידע טכני: קריאה ופענוח ברמה גבוהה של תוכניות חשמל מורכבות, סכמות חד-קוויות ושרטוטי פיקוד. כישורים אישיים: יחסי אנוש מעולים, סמכותיות, יכולת ניהול עובדים ופתרון בעיות בזמן אמת בשטח. כפיפות: מנהל פרויקט / מהנדס פרויקט מיקום המשרה: עבודת שטח (באתר ההקמה) היקף משרה: משרה מלאה, נדרשת נכונות לנסיעות המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8807543
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/10/2026
Location: Herzliya
Job Type: Full Time
as a Radar Systems Engineer in our R&D department, where you will play a key role in the development and optimization of advanced radar systems.
Responsibilities: Design and develop radar system components and architecture. Conduct performance analysis and system optimization. Collaborate with cross-functional teams to integrate radar systems into larger projects. Perform testing and validation of radar systems to ensure compliance with specifications. Troubleshoot and resolve technical issues related to radar systems. Document design processes, specifications, and TEST results. Support system deployment and field operations as needed.
Requirements:
Bachelor's degree in Electrical Engineering or related field Minimum 5 years of experience in radar systems engineering Proficiency in radar system design and signal processing Experience with system integration and testing Strong problem-solving and analytical skills Familiarity with software tools such as MATLAB and LabVIEW Excellent communication and teamwork abilities Master's degree preferred but not required
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8743098
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
18/10/2026
Location: Park Tzora
we are looking for a System Operator.
The System Operator is responsible for operating and maintaining Digital Casting production systems in an R&D environment, working in an industrial setting under the supervision of a process engineer. The role involves working in 3 shifts: morning, evening, and night.
Responsibilities:
Machine Setup: Assemble tools and load raw materials into machines, preparing them for operation.
Calibration: Perform required calibrations to ensure proper machine functioning.
Process Monitoring: Check and input process parameters and other production data.
Equipment Operation: Operate equipment for material handling and the computerized process.
System Performance Monitoring: Monitor and report on operational equipment, ensuring optimal system performance.
Data Recording: Record process-related data in an organized manner for accurate tracking.
Quality Inspections: Perform visual inspections of quality and quantity, making adjustments to resolve issues under supervision.
System Cleanup: Disassemble cast parts and clean the system after processing at the end of each shift.
Safety Compliance: Adhere to all safety requirements and properly use personal protective equipment (PPE).
Inventory Management: Maintain and manage inventory of materials and tools.
Requirements:
Education: Technician/Technologist certificate in Mechanical, Electrical, Control Engineering, or related fields, with technical experience.
Experience: Experience with sketches, CAD, etc., to support the design and construction of systems (advantageous).
Machine Experience: Preference for candidates with experience in operating machines.
Technical Skills: Computer proficiency is essential.
Analytical Skills: Strong analytical and problem-solving abilities.
Team Communication: Ability to communicate effectively with all team members across various roles.
English: Good level of proficiency in English.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8861067
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
we are a leading company specializing in the development and manufacturing of autonomous drone systems. Its solutions combine hardware, software, and AI-driven technologies to support complex, large-scale operations. our company works primarily with defense industries, such as military and law enforcement agencies worldwide. The company is part of Ondas Holdings and operates as a wholly owned subsidiary.
In this role, you will be part of the electronics engineering team responsible for leading projects end-to-end, including electronics design, drafting, design verification testing, collaboration with internal departments, external suppliers, and supporting development and production phases
Responsibilities
Planning, executing, and documenting verification & validation (V&V) tests for electronic circuits, assemblies, and multidisciplinary systems
Performing functional, electrical, environmental, and integration tests for airborne and ground electronic systems
Preparing, executing, and documenting ATP (Acceptance Test Procedure) and validation test documents
Operating laboratory equipment such as oscilloscopes, spectrum analyzers, signal generators, power supplies, multimeters, and data acquisition systems
Performing hands-on debugging and troubleshooting of electronic boards, communication interfaces, cables, and system-level failures
Supporting integration, bring-up, and verification activities throughout development and production stages
Writing detailed test reports, validation summaries, failure analyses, and technical documentation
Working closely with hardware, firmware, system engineering, integration, manufacturing, and production teams
Supporting qualification, acceptance, and reliability testing processes מול customers, subcontractors, and internal teams
Managing laboratory activities, maintaining test setups, and supporting calibration and organization of lab equipment
Solving technical and system-level challenges under tight schedules and multidisciplinary constraints.
Requirements:
Practical Engineer / B.Sc. in Electrical / Electronics Engineering from a recognized institution
5 years experience in electronic testing, validation, integration, or hardware verification
Hands-on experience with laboratory and electronic test equipment
Strong technical orientation and troubleshooting capabilities
Understanding of analog and digital electronic circuits
Ability to read schematics, wiring diagrams, and technical documentation
Ability to work independently and manage multiple tasks in parallel
Strong teamwork skills, interpersonal communication, organizational abilities, self-learning skills, and the ability to work under pressure
Advantages
Experience with airborne systems, drones, robotics, or multidisciplinary systems
Familiarity with environmental and qualification tests (EMI/EMC, vibration, thermal, etc.)
Experience with automated test systems and scripting tools (Python / LabVIEW / MATLAB)
Experience in production support and work with subcontractors
Experience with RF systems and communication equipment
Familiarity with communication protocols such as UART, SPI, I2C, CAN, and Ethernet
Experience writing and executing ATPs, test procedures, and technical reports.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8860739
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
18/10/2026
מיקום המשרה: ירושלים
סוג משרה: משרה מלאה
בירושלים דרוש/ה מהנדס/ת אלקטרוניקה לעבודה מעשית עם מכלולי RF ומיקרוגל, בתפקיד שמחבר בין אינטגרציה, מדידות, כיוונים ואיתור תקלות - עד שהמכלול עומד בביצועים הנדרשים ומוכן לעבור לייצור.
תפקיד למי שרוצה להישאר קרוב לחומרה ולמעבדה, לעבוד hands-on עם RF, ובמקביל להיות חלק מהדרך של המוצר מפיתוח ועד לייצור.
במידה ואת/ה עונה לדרישות החובה במלואן,
שלחו אליי קו"ח למייל.
דרישות:
מהנדס/ת חשמל ואלקטרוניקה
ניסיון מעשי בעבודה עם מערכות או מכלולי RF / מיקרוגל
ניסיון hands-on באינטגרציה, בדיקות, כיוונים או כיולים בתחום ה- RF
ניסיון בעבודה עצמאית עם ציוד מדידה בתחום ה- RF, כגון VNA / Network Analyzer, Spectrum Analyzer ו-Signal Generator
ניסיון באיתור תקלות בחומרה באמצעות
מדידות וקריאת סכמות אלקטרוניות
יתרון
ניסיון באינטגרציה של מערכות או מכלולי RF מורכבים, מעבר לבדיקות של יחידה בודדת
ניסיון באיתור תקלות ברמת כרטיס ורכיב
ניסיון בעבודה בסביבת פיתוח חומרה ו/או בתהליכי העברה מפיתוח לייצור. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8860433
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
18/10/2026
Job Type: Full Time
We're a global leader in smart energy technology, with over 3,000 employees, offices in 34 countries, and millions of installations worldwide. Our innovative solutions include solar inverters, battery Storage, backup systems, EV charging, and AI-based energy management. We're committed to making clean, green energy the primary power source for homes, businesses, and beyond. With the growing demand for electricity, the need for smart, clean energy sources is constantly rising. SolarEdge offers amazing opportunities to develop your skills in a multidisciplinary environment, covering everything from research and development to production and customer supply. Work with talented colleagues, tackle exciting challenges, and help create a sustainable future in an industry that's always evolving and innovating. Join us and be part of a company that values creativity, agility, and impactful work. We are looking for an Electrical Engineer to join our data Centers Group We are seeking an experienced Electrical Engineer with a valid Israeli Engineer Electrician License (רישיון חשמלאי מהנדס) to join our data Center Power Solutions team. In this role, you will be responsible for the design, development, testing, and commissioning of electrical power systems and electrical panels for advanced power conversion and distribution solutions. The ideal candidate will combine strong electrical design capabilities with hands-on experience in electrical installations, panel assembly, commissioning, troubleshooting, and laboratory work. Experience with medium-voltage (MV) and low-voltage (LV) systems is highly desirable. Key Responsibilities
* Design electrical power distribution systems, switchboards, and control panels for industrial and data center applications.
* Create electrical schematics, wiring diagrams, single-line diagrams (SLDs), and cable schedules.
* Select and specify electrical components including breakers, contactors, relays, busbars, transformers, CTs, sensors, and protection devices.
* Design electrical cabinets and panel layouts while ensuring compliance with IEC, UL, and applicable electrical standards.
* Support MV and LV power system architecture and integration activities.
* Perform electrical calculations including load analysis, cable sizing, short-circuit studies, voltage drop calculations, and protection coordination.
* Lead hands-on electrical assembly, wiring, commissioning, testing, and troubleshooting activities in the laboratory and field.
* Work closely with mechanical, hardware, Embedded software, and system engineers to ensure successful product integration.
* Support prototype builds, validation, and design verification testing.
* Develop TEST procedures and execute electrical safety and functional tests.
* Interface with suppliers, contractors, panel manufacturers, and certification bodies.
* Create and maintain technical documentation, TEST reports, specifications, and design guidelines.
* Support installation and startup activities at customer and demonstration sites.
Country:
Israel
City:
Modiin
Requirements:
* B.Sc. in Electrical Engineering.
* Valid Israeli Engineer Electrician License (רישיון חשמלאי מהנדס).
* Minimum 5 years of experience in electrical engineering.
* Proven experience designing electrical panels, switchboards, or industrial electrical systems.
* Experience with MV and/or LV power distribution systems.
* Strong understanding of electrical protection, grounding, and safety practices.
* Experience with electrical schematics and CAD tools (AutoCAD Electrical, EPLAN, or equivalent).
* Hands-on experience in electrical assembly, commissioning, testing, and troubleshooting.
* Knowledge of IEC and electrical safety standards.
* Ability to independently lead electrical design activities from concept through commissioning.
* Strong technical documentation a
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8807244
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
16/10/2026
מיקום המשרה: אשקלון
סוג משרה: משרה מלאה
החיבור בין קוד, חומרה ושטח מרגש אותך?
לחברתנו דרוש/ה איש בקרה ואוטומציה להובלת פרויקטים תעשייתיים מתקדמים משלב הפיתוח ועד למסירה.
מה כולל התפקיד?
תכנות ופיתוח מערכות PLC ו-HMI/SCADA.
ביצוע אינטגרציות, הפעלות ואיתור תקלות באתרי לקוח.
ניהול פרויקטים מקצה לקצה.
מיקום המשרה: אשקלון.
דרישות:
מה אנחנו מחפשים?
הנדסאי/ת או מהנדס/ת חשמל / בקרה / מכטרוניקה / מכשור ובקרה.
ניסיון של שנה לפחות בבקרה ואוטומציה - חובה.
ניסיון בתכנות בקרים (PLC), ומערכות HMI/SCADA - יתרון. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8859889
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Kefar Sava
Job Type: Full Time
The Configuration Control Engineer is responsible for managing configuration control and product build processes within the PLM system. This role involves documenting products throughout their lifecycle, collaborating with R&D, marketing, manufacturing, and subcontractors.

Key Responsibilities:

Oversee configuration control and product release in the PLM system.
Document products throughout their lifecycle, working closely with R&D, marketing, manufacturing, logistics, QA and subcontractors.
NPI- Support products from development through to mass production.
Integrate manufacturability and testability considerations (DFM, DFA, DFT, DFC) during design reviews.
Provide technical support related to PCB topics.
Oversee First Article production and feedback for corrections.
Define manufacturing processes, prepare instructions, assembly drawings, and related documentation (Manufacturing procedures, Fabrication flow, PRR, etc.).
Manage engineering change processes in PLM-ORACLE.
Collaborate with various company departments and interfaces.
Build manufacturing files and support subcontractors (including supporting production line issues).
Optimize production lines and improve engineering processes using new technologies, cost reduction, and time-saving initiatives.
Write procedures and ECR/ECN documents
Requirements:
Degree in Electronics Engineering or practical Electronics Engineering.
3 years of experience in a similar engineering role within a high-tech or defense company.
Experience in manufacturing and PCB assembly processes.
Deep understanding of engineering processes and collaboration with development and manufacturing teams.
Knowledge of PCB technologies - an advantage.
Experience in writing engineering procedures and DFM.
Significant experience with PLM systems.
Knowledge of AUTOCAD - advantage.
Detail-oriented, self-learner, proactive, and responsible.
High level of English.
Strong technical skills.
Energetic and diligent.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8859816
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
15/10/2026
מיקום המשרה: מרכז
סוג משרה: משרה מלאה
לחברה ביטחונית מובילה דרוש/ה מהנדס/ת אלקטרוניקה או חומרה לתפקיד המשלב פיתוח הנדסי, איכות ואמינות מוצרים.
*מה כולל התפקיד?*
- עבודה צמודה עם צוותי R&D לאורך תהליכי הפיתוח.
- ליווי תהליכי פיתוח חומרה והנדסה.
- הובלת חקרי כשלים, ניתוח גורמי שורש ושיפור אמינות המוצרים.
- זיהוי סיכונים ומניעת כשלים כבר בשלבי התכנון.
- עבודה עם מתודולוגיות איכות ואמינות, לרבות FMEA/DFMEA.
- בחינת תהליכים וכלים טכנולוגיים מתקדמים לשיפור איכות הפיתוח.

*מתאים לך?* נשמח לקבל קורות חיים למייל.
דרישות:
- תואר בהנדסת חשמל ואלקטרוניקה או רקע הנדסי רלוונטי בפיתוח חומרה.
- ניסיון משמעותי ומוכח בפיתוח חומרה או מוצרים אלקטרוניים.
- הבנה מעמיקה של תהליכי פיתוח ותכן הנדסי.
- ניסיון בחקרי כשלים, אנליזות אמינות או FMEA - יתרון משמעותי.
- יכולת עבודה מול ממשקים הנדסיים ורבתחומיים.
- היכרות עם כלי AI וטכנולוגיות מתקדמות - יתרון. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8858598
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
15/10/2026
מיקום המשרה: כפר סבא
סוג משרה: משרה מלאה
למשרד מהנדסים בכפר סבא דרוש/ה מהנדס.ת / הנדסאי.ת חשמל / שרטט.ת
לעבודות שירטוט מבנים בתחום החשמל
נדרשת אחריות, דיוק, ראש גדול.
משרה מלאה, ימי עבודה א-ה שעות עבודה 08:00-16:00
תנאים טובים למתאימים/ות
נשמח לקבל קורות חיים ולהכיר!
דרישות:
ידע ב AUTOCAD חובה, ידע ב REVIT יתרון. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8858303
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
we are seeking a Lead Systems Engineer with a strong background in electronics and a solid understanding of electronic systems to drive Point-of-Care Ultrasound systems engineering activities across the full product lifecycle.
Job Description
Key Responsibilities:
Lead and manage system-level requirements and specifications throughout product development
Drive system verification and validation activities, including end-to-end system testing
Act as the primary interface between Algorithm, Software, and Verification & Validation (V&V) teams
Lead product risk management activities in accordance with regulatory and quality standards
Drive resolution of complex technical issues to ensure project milestones and goals are met
Collaborate closely with Program Management to support scheduling, mitigate technical risks, and inform decision-making through sound engineering judgment.
Requirements:
Bachelors degree in Electrical Engineering, Biomedical Engineering or a related engineering discipline
Minimum of 5 years of experience in medical device development and/or complex system development
Masters degree in Systems Engineering - an advantage
Desired Characteristics
Strong written and verbal communication skills
Proven ability to analyze complex problems and develop effective solutions
Ability to document, plan, and execute development programs
Demonstrated project management and cross-functional collaboration skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857582
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות שנמחקו