לוח משרות דרושים מהנדס מחשבים בפתח תקווה

Required VLSI Logic Design Technical Lead
The EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

Were looking for a Backend Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.

Required Experienced SoC Verification Engineer
Which team will you join?
Mobileye EyeC VLSI team - a group designing the chips for Radar systems for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
You will take a central hands-on role in Design Verification.
Define Environment micro-Architect, Implement complex UVM environment, Build vPlan .
Execute coverage implementation.
Be part of external IP verification and Internal custom IP.
Be part of System definition and top-level activity.
Take part in Silicon bring-up.

A world leader in driver assistant systems and autonomous vehicles, is looking for talented silicon validation engineer for the range of its next generation SoCs supporting its radar systems
Our team is responsible for validating our radar SoCs, utilizing Pre-Silicon environments, as well as Post-Silicon platforms.
We are developing fully embedded C++ based validation environment for our needs.
You will be taking part in developing anything from environment and drivers through system modules such as file system, network stack, memory management and more, and up to complex automation tools in both C++ and python.
What will your job look like
Get a deep understanding of our chip hardware IP blocks, both analog and digital.
Develop our validation environment.
Develop, port, or add features to the product drivers using Technical Specs and existing modules.
Define, develop and execute various complex validation scenarios on the SoC.
Debug complex SoC problems using embedded GDB, JTAG probes, going down to signal level using scopes.
Take part in Next Gen SoC's Power-On's and platforms Bring-Up's.
Collaborate with other SW/Embedded and HW/Electrical Validation teams across the company.

Required Experienced RFIC/Analog CAD Engineer
The RFIC/Analog design groups in our Radar organization is responsible for developing the cutting edge Transceivers in mmW frequencies for the best Imaging Radar technology. The design process includes the entire process from specs to productization.
To support these challenging processes, we need a skilled CAD team that will work with the design teams on all design aspects and flows from design environment setups, through design tools implementations and support and to chip level verifications and validation enablement.
We're looking for an Experienced CAD or Design Automation Engineer to develop our RF/Analog design tools/flows and automation flows for the next-generation Imaging Radar chips.
What will your job look like:
Build and support RF/analog design environments
Implement, develop, and maintain design flows, tools and scripts.
Evaluate and explore new automation technologies and advocate for efficiency improvements
Evaluate multiple vendor solutions and guide execution, in the most optimal use, based on design needs
Effectively communicate and support a large number of designers, providing high-quality tools and flows, documentation, and presentations.

Were looking for a Experienced Physical Design Engineer to join the growing Physical Design Team, responsible for developing our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.

Required Experienced Logic Design Engineer
The EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

We are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.

Required Experienced Physical Design Engineer
Which department will you join?
VLSI team - a group designing the EyeQ chips for ADAS and autonomous cars.
The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Backend Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.

Were looking for a technology enthusiastic Team Leader with a drive for excellence and out of the box mindset to lead our Devops Delivery team.

What you'll do:
Lead and inspire a team of DevOps Engineers specializing in CI/CD and automation.
Work closely with peer teams across the DevOps Department to drive alignment and collaboration.
Tackle complex technical challenges related to performance, scalability, security, and live production operations.
Partner with R&D leadership to optimize deployment strategies, enhance system reliability, and design robust failover and scaling mechanisms.
Oversee your teams architecture, design, and deliverables to ensure technical excellence and innovation.
Coach and mentor team members, fostering their growth and ensuring the achievement of team goals.
Track and report on team KPIs, providing visibility into performance and progress.
Lead POCs to address R&D DevOps needs and drive innovation initiatives within the department.
Serve as the hands-on technical authority, setting a high standard for engineering practices within your team.
Own the overall design, development, code quality, and production deployment practices for your team's solutions.
Invest in the professional and personal growth of each team member, cultivating a high-performing, engaged team.

mPrest is seeking a Lead Systems Engineer to drive the development of complex multidisciplinary projects from concept to deployment. The role involves system-level design, integration of mechanical and electrical components, coordination between engineering teams, and managing multiple parallel tasks in a dynamic environment.

Responsibilities:
Lead system engineering activities for complex, multidisciplinary defense projects
* Define system architecture, requirements, and interfaces across mechanical, electrical, and software domains
* Prepare and maintain system specifications, requirement documents, and test plans
* Collaborate with internal teams, subcontractors, and customers
* Manage risk assessments and project trade-offs
* Oversee and coordinate system integration and validation
* Participate in design reviews and lead system-level engineering discussions