לוח משרות דרושים חשמל ואלקטרוניקה

Which department will you join?
our companys Unit Level Verification Team in Haifa is looking for an experienced verification engineer to be involved in the development of
our companys future AI and deep learning HW accelerators.
This is an exciting opportunity to join a team of highly talented engineers, working on the most cutting-edge technologies to deliver
our companys EyeQ future chips, aimed to power the worlds first fully Autonomous Vehicle!
What will your job look like?
Define, implement and enhance verification environments using UVM methodology.
Write and debug tests that combine UVM methodology and SW code.
Identify and write various types of coverage measures.
Collaborate with designers, architects, and SW developers from Haifa and Jerusalem teams to deliver the most comprehensive verification environment.
Integrate Industry Standard (such as AXI and OCP) and other 3rd party VIPs.

The HW System Architecture Team is a small team, whose goal is to support the development of next-generation systems for our companys self-driving car and advanced driver-assistance systems. We apply multiple disciplines to develop these solutions that serve our customers and our companys R&D
What will your job look like?
Wire Harness Engineer you will participate in the definition and implementation of our company autonomous vehicle platform.
Design/Distribute of Hi-speed cables.
Design/Definitions of lab, farm and vehicle harnesses.
Ensure that the vehicle wire harnesses are connecting all the devices in a reliable and producible manner, in consideration of manufacturability and serviceability.
Design/Optimization of power distribution.
Creation/Maintenance of harness documentation.
Interface with suppliers and act as a technical point of contact.
Work with engineering to develop assembly and install instructions.
Ensure BOM accuracy, release drawings for manufacturing.
You will be as part of System Architecture team and should be comfortable with a high degree of ambiguity.

our company's EyeQ Platform Group (EPG) is seeking a motivated Formal Verification Engineer to join our team and contribute to development of hardware verification environments.
This position offers an opportunity to apply formal methods to verify the correctness of various complex digital systems.
This is an exciting opportunity to join a team of talented engineers, working cutting edge technologies in the field of autonomous vehicle.
What will your job look like:
Be the owner of formal verification environment from first draft to sign-off stage
Apply formal methods to verify the correctness of various complex digital systems
Work with HW architects\designers to define assumptions, rules and cover properties
Help define the formal verification methodology and environment to be applied by the team
Explore new Formal methods and Tools
Work with tools like Cadence JasperGold, Verisium manager, Xcelium, Indago
Analyze verification results, identify bugs, and collaborate with engineers to resolve design issues
Develop generic formal blocks\functions of commonly used logic, to be later used off the shelf.

We are looking for an experienced Hardware Team Lead to manage our Board Design Engineering team within the AV department. In this critical role, you will drive the development of cutting-edge automotive products by owning the design and delivery of high-performance electronic boards and systems. Your leadership will ensure projects meet the highest standards of quality, performance, and innovation.
What will your job look like?
Lead and Do: Combine strong technical leadership with hands-on hardware engineeringthis role is both strategic and actively involved in execution.
Team Management: Mentor, guide, and grow a high-performing team of hardware engineers, while setting clear technical direction and expectations.
End-to-End Project Ownership: Drive the entire hardware development lifecyclefrom architecture and schematic design to validation and release to mass production.
Design Leadership: Personally contribute and oversee electrical design, schematic reviews, component selection, and layout best practices.
Lab Engagement: Stay closely involved in board bring-up, debugging, and validationworking side by side with engineers to solve tough technical challenges.
Cross-Team Collaboration: Act as a key point of contact across software, mechanical, architecture, and manufacturing teams to ensure seamless product integration.
Customer-Facing Leadership: Represent the hardware team in technical discussions with customers, demonstrating both leadership and in-depth technical knowledge.

'קwe are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.

our company EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars.
Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Physical Design STA Technical Expert to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Leading FC timing activities & methodologies for brand New SoC, from definition to TO.
Writing design constraints (SDC) for FC/IP/Block levels for all modes.
Involved in chip architecture definition for functional & DFT domains.
Working in close collaboration with the front-end & architecture team.
Working with engineers to identify and overcome roadblocks and obstacles.
Defining AC timing from spec to implementation.
Supporting complex clock structures.

our company EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars.
Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Physical Design Expert to join the growing Physical Design Team, responsible for developing our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

You will join a team of talented and experienced Signal/Power Integrity (SI/PI) & Electrical Validation engineers with wide scope of responsibility, from Pre-Silicon SI/PI simulations to Post-Silicon Electrical validation and debugging, covering all High-Speed interfaces and Power Delivery of our company EyeQ ASIC products.
What will your job look like:
You will deal with design, simulations, optimization and debugging of high-speed interfaces - like LPDDR4/5, PCIe Gen4/5, C/DPHY, Multi Giga-Bit Ethernet, High-Speed interfaces over Power Cables, Power Delivery Networks.
You will develop Layout guidelines, review the physical design process and check its quality.
You will deal with state-of-the-art signal & power integrity simulation tools and methodologies, advanced results analysis, optimization/verification of our company and customers' PCB designs, etc.
This is a dynamic work environment that requires interfacing with Silicon & Hardware design engineers, IP providers, Electrical and System Validation teams, Customer Application Engineers, EDA tools vendors, and product managers.
The proximity to Electrical Validation activities - we are a single SI/EV team - is another strong advantage, enabling joint simulation-measurements efforts.

our company's EyeC Radar group develops innovative high-performance Imaging Radar solutions for ADAS and Autonomous Driving markets.
We are seeking a talented individual to join our team as an Senior Automation Engineer. This multifaceted role requires expertise in DevOps practices, integration technologies, release management, IT and lab support, as well as proficiency in developing automation solutions. The ideal candidate will have a strong technical background coupled with a proactive mindset to drive efficiency and reliability across our systems and processes.
What will your job look like:
Take full ownership and manage all aspect of the exaction, meeting with stakeholders and making informed decisions
Design and implement verification and validation environments and tests for Automotive Radar Products.
Participate in integration, feature/product enabling, and bring-up activities.
Develop state-of-the-art software tools for the validation environment and features for the ATE.
Automate provisioning, configuration, and deployment processes to increase efficiency and scalability
Design, implement, and maintain CI/CD pipelines to automate software delivery processes
Collaborate with development and validation teams and troubleshoot integration issues.

we are looking for a Senior Low-Level Architect to join our AV group and facilitate the architecture of our cutting-edge products and system validation flows.
In AV we are building the next generation autonomous driving products in mass production for consumers and commercial customers.
What will your job look like?
This position is a multi-disciplinary, cross-functional senior technical role, encompassing low-level architectural aspects across several domains for our company AV products suite.
You will collaborate closely with customers and internal teams, including hardware and software leads, system engineers, architects, and product managers.
You should possess both in-depth expertise and a wide-ranging knowledge across various disciplines.
You will analyze and define customer and internal requirements for systems, components, and validation processes, while establishing KPIs and success criteria.

Want to make a real impact with your worknot just on your company, but on the world?
Beewise is one of the most innovative and impactful startups youve (probably) never heard ofyet. Were the first company to successfully scale up the saving of bees using cutting-edge technology, ensuring the security of the global food supply.

Our product, the Beehome, is a robotic beehive designed to protect and support bee colonies using advanced vision systems, sensors, and autonomous decision-making. It monitors hive health and optimizes beekeeping actions in real-time using AI, computer vision, robotics, and precision engineering.
Roles and responsibilities:
As a Robotic Vision Engineer, you will take full ownership of the design, implementation, and maintenance of our robotic perception systems. From concept to deployment, you will shape how our robotic platforms see and interact with the beehive environment.

Youll work on:
Translating raw visual data into precise 3D positioning for robotic movements
Vision fusion, object detection, feature classification, and 3D geometry analysis
Testing your solutions in real-world systems and refining for accuracy and robustness
Developing both deep learning models and classic algorithmic techniques

The System Engineer will join our growing system engineering group to support and lead the design, characterization, implementation, integration, and sustained engineering of our multidisciplinary, world-first autonomous robotic Bee-hive.
Roles and responsibilities:
Lead the project R&D development, defining system architecture, system processes, and engineering trade-offs, involving knowledge in mechanics, control systems, electronics, embedded software, cloud computing, and computer vision.
Define the engineering system requirements and support the implementation, integration, and testing phases.
Managing cross-functional team work.
Lead the sustained engineering of the bee-home from all aspects in the field and production line.