לוח משרות דרושים חשמל ואלקטרוניקה ברחובות, לחיפוש זה נמצאו 163 משרות

This is an opportunity to embark on an interesting and challenging adventure into the world of satellite communication which is undergoing a major disruptive revolution.

The LS includes Control and data processing HW, SW as well as Phy and Radio HW and FW, to construct a full communication system supporting DVB-S2X as well as other Radio and IP communication protocols.

 Responsibilities

Landing station system validation activity including Phy, HW and SW validation
Study system architecture and system requirements and take part in a test plan to address these requirements in collaboration with system engineering and other teams
Define and write automatic test plans and test procedures for new systems and features
Build test setups for fully automated regression as well as for manual tests
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems
Record, investigate and analyze defects
Investigation of root cause of test case failures and providing corrective action in conjunction with development teams
Support Test Management tools and continuous integration methodologies
Data analysis and post processing of data collected
Compilation of regular Test execution summary report with metrics

Our Sat Connect IC business unit, a division of our Satellite Systems business is a leading provider of ASICs, software, multibeam electronically steered antennas, and complete systems for communication satellites, as well as ground and airborne terminals. Located in Israel, the UK, Bulgaria, and the US, we are a techno logy leader in satellite communication.

Job Description:

Be part of a dynamic and motivated modem VLSI design team. Take part in a complex SOC VLSI chip-design activities with major focus on advanced digital signal processing and modem subsystem development, covering architectural, front-end design, verification and physical-design aspects.

VLSI development of digital modules from concept to final implementation, meeting physical design entry requirements
Be part of a multi-team developing advanced signal processing cores and subsystem solution
In charge of adjusting, deploying and integrating the subsystem into company design environment

Our Sat Connect IC business unit, a division of our Satellite Systems business is a leading provider of ASICs, software, multibeam electronically steered antennas, and complete systems for communication satellites, as well as ground and airborne terminals. Located in Israel, the UK, Bulgaria, and the US, we are a techno logy leader in satellite communication.

Responsibilities

System validation activity includes Phy, HW and SW validation
Study system architecture and system requirements and take part in a test plan to address these requirements in collaboration with system engineering and other teams
Define and write automatic test plans and test procedures for new systems and features
Build test setups for fully automated regression as well as for manual tests
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems
Record, investigate and analyze defects
Investigation of root cause of test case failures and providing corrective action in conjunction with development teams
Support Test Management tools and continuous integration methodologies
Data analysis and post processing of data collected
Compilation of regular Test execution summary report with metrics

Be part of a dynamic and motivated multi-national Physical Design team, taking part in developing a state-of-the-art Satellite SoC through the full life cycle: design to production. The chips include complex digital and analog modules. Some of the products are part of the next generation radiation hardened satellite modems. You will have access to best-in-class EDA design tools and will be working in leading edge process technologies.

Responsibilities

Physical implementation of complex SoC, VLSI devices and Test Chips, integrating custom designs and 3rd party IP (Hard, Soft, IO, CPUs, DSPs, etc)
Full block level timing closure and manufacturing checks signoff including power planning and analysis
Working alongside the Logic Design RTL team to develop timing constraints for implementation at block and chip level
Insertion of DFT test structures and chip level integration, capture and simulation
Jointly with management, build your career development and growth opportunities.

Laser Systems Engineer (Maternity Leave Replacement).
We are looking for Elbit Systems in Rehovot is looking for a Laser Systems Engineer (Maternity Leave Replacement). Join a meaningful role focused on leading and supporting system integration processes for advanced electro-optical systems incorporating high-power lasers. This position offers the opportunity to work at the forefront of technology within a leading defense organization, with direct impact on the development of complex multidisciplinary systems. In this role you will Lead and define system integration processes for advanced electro-optical systems Work independently in the laboratory environment, including execution of system tests and experiments Lead multidisciplinary teams and collaborate with multiple interfaces Write and maintain technical and system documentation Work in a dynamic technological environment with challenging project timelines.

*Only relevant applications will be answered.
Rehovot#

We are looking for a System Engineer Team Lead to lead our next generation system development.
In this role, the Project Lead will technically lead a complex multidisciplinary electro-optical system architecture. He will define and manage the required performance analysis, technical solutions, implementation methods, and field deployment to the customer's satisfaction.
Responsibilities
What you will be doing:
Technical:
Design the system architecture/high-level design and technical requirements.
Serve as the system go-to person for all technical matters; a technical expert knowledgeable in system operation, performance, and troubleshooting. Act as the technical POC for system escalations and customer support.
Project Management:
Plan, monitor, and lead the project to ensure product delivery within required specifications, on time, and within the allocated budget (Gates, PMR).
Maintain a project risk management and mitigation plan.
Lead the development activities and technical reviews throughout the PLC (SRR, PDR, CDR, FDR) and other technical design reviews.
Assign project tasks, follow up, and align with development groups, service, and production.
Lead all aspects of the beta tool delivery.
Act as the key contact for inbound topics (matrix interface) and outbound topics with MKT.
Team:
Develop and grow team ownership and technical capabilities.
Provide technical guidance for System/Product engineers.

We are looking for a R&D System Scientist Lead
Role Description
The system engineering team is a multidisciplinary team of physicists and engineers that lead and define the development of novel technologies and advanced solutions for high standard metrology products all the way from early research stages to full product delivery. These systems combine advanced HW & mechanical design with complex optical systems, electronics, motion and control, algorithmic solutions and SW.
We develop metrological products for challenging applications in the semiconductor industry - Demanding accuracy, precision, fast & high-rate measurement operation, all together with the high robustness standards associated with high-volume manufacturing (HVM) production lines of our customers.
The system engineer is required to demonstrate both innovative and critical thinking together with methodological and precise scientific investigation, both broad and in-depth understanding of complex multi-disciplinary systems with strong insight of the physics and algorithms defining its performance.
The system engineer is required not only to perform as a technology expert but also hold a firm understanding of the broad view related to the many stake holders - Customer requirements, marketing and business, service challenges and production capabilities. The system engineer defines the technology that will solve the problem, but also how the customer will use it. The system engineer develops the technology but also the delivery plan and method, down to all the last details.
We are looking for innovative multidisciplinary experts that have strong insight and scientific thinking that are pro-active team players and push for high standard delivery.
Responsibilities
What you will be doing:
Theoretical and experimental study of new system methods and algorithms to support state-of-the-art solutions
Define and oversee the implementation of your solutions
Hands on tool experiments and testing in clean-room environment
Service and production guidance and support on challenging topics
Collaboration and system lead with HW and SW engineers
Data and statistical analysis
Advanced logic and sequence design
Algorithm development
Performance and critical behavior testing and design
Developing practical solutions and methods for critical challenges
Conduct lab and on-site system diagnostics, troubleshooting, and problem-solving. Tasks include root-cause analysis, mitigation plans, implementing robust system calibration methods, and product transfer to manufacturing.
Intensive interface with diverse disciplines: physics, optics, algorithms, mechanics, electronics, and software.
Transform customers high-level requirements into concrete technical specifications and design.
Flights to customers around the world (up to 2 times per year).

The Production team is looking for a Production Integration Engineer to join the integrated metrology line and work on state of the art tools in the semiconductor industry.
Your role will be to manufacture the company products while maintaining highest quality and on-time delivery.
As part of your job you will interact and work with the Engineering, R&D and QA departments to solve complicated on tool problems and test new tools and features as part of the transfer to production process.
Responsibilities
What will you be doing:
Lead tool manufacturing process from start to end (1-2 weeks project).
Integration of multidisciplinary systems (optical, electronic, pneumatic, computing, and mechanical) according to predefined procedures.
Ability to solve complex system challenges, constantly learning and striving to independence.
Working with engineering and R&D to address systems/production process challenges.
Addressing quality issues and repair recommendations for suppliers by nonconformance report.
Working in an organized way using digital procedures and flow management system.
Always striving to reduce cycle time and improve working process.
Helping and consulting team members to overcome challenges on their tools.

The Engineering department is looking for a Product Leader to be responsible for End-to-End system engineering related aspects
our Engineering department is part of DMD division.
You will be responsible for overseeing all NPI-related processes, ensuring manufacturability and sustainability across our multidisciplinary products, including both hardware and software.
Responsibilities
What will you be doing:
Lead NPI activities from the early design phases (DFx, prototyping) through the first article stage, implementation (High Volume Manufacturing), and ongoing sustainability
Lead and support aspects of existing products through ECO, including new Design, Failure Analysis, Wavers review, End Of Life substitute, Procedures
Act as a focal point with Supply Chain, Purchasing, Quality, Logistics, Service and R&D
Responsible of System aspects in Production line, through product cycle- NPI to End of Life
Support Production requirements, jigs/ test tools, troubleshooting, cost reduction activity and reliability

The integration team is looking for an Integration Engineer to work in a dynamic planning role.
Youll be joining the Production group in the Operation department as an Integration Engineer:
Our role is to maintain company business by manufacturing and delivering products to our customers in the highest quality & on-time
Responsibilities
What you will be doing:
Lead tool manufacturing from start to end (10 weeks project) of multidisciplinary complex systems Integration (optical, electronic, pneumatic, robotics, computing and mechanical) according to predefined procedures while overcoming quality, maturity and system issues.
Working with engineering and R&D to address systems/production process issues
Working with suppliers to address quality issues and repair
Involvement in production of repaired units (service support)
Working in organized way according to procedures.