לוח משרות דרושים ביקנעם, לחיפוש זה נמצאו 489 משרות

The System-On-Chip (SOC) group is looking for a Senior RTL Design Engineer to serve as the technical lead for clocks development on our next-generation networking chips. Clocks are the backbone of the SOC. In this role you will lead the development of the chip's clocking logic - PLL and reference clock integration, clock generation, distribution, muxing and dividers, glitchless switching, clock gating, reset synchronization, and the clock domain crossing infrastructure that every unit on the die depends on.

This is an RTL design and technical leadership role, not a circuit or transistor-level design role. Working from the clock architecture defined with the architecture and micro-architecture teams, you will lead its implementation in RTL, guide other engineers contributing to it, and drive it through to silicon in close partnership with Design Verification and Physical Design (backend). You will also interact regularly with CAD, Package Design, Software, and DFT teams.

What you'll be doing:

Acting as the technical lead for SOC clocks development - leading the implementation of the clocking logic from specification through tape-out and bring-up.

Working with the architecture and micro-architecture teams on the SOC clock and reset scheme: collecting clocking requirements from units across the chip, feeding back implementation and timing considerations, and translating the agreed scheme into a verifiable design.

Writing and reviewing synthesizable Verilog/SystemVerilog RTL for clock generation, distribution, muxing, division, glitchless switching, gating, and reset synchronization.

Leading and mentoring other RTL engineers working on clocking: reviewing designs, setting coding and quality standards, and distributing work across the team.

Working hand-in-hand with the Physical Design (backend) team on clock tree implementation, SDC/timing constraints, partitioning, floorplan feedback, trial synthesis, and timing convergence.

Partnering with Design Verification on clocking testplans, functional and gate-level debug, and coverage closure.

Supporting Software and firmware teams on clock programming sequences, DVFS, and low-power/clock-shutdown flows.

Representing clocking implementation in cross-functional design reviews with architecture, PD, DV, DFT, and CAD stakeholders.

The Networking Application Engineering team is looking for an experienced networking engineer, with wide knowledge in networking systems with focus on physical layers, to join the team and support groundbreaking technology. As a AI Networking Application Engineer one will have a real impact on the business, while working closely with our customers and R&D teams.

What youll be doing:

Gain our customers trust and understand their needs.

Support new supercomputers and AI fabrics technologies.

Solve complex issues while leading highly visible customer issues.

Work closely with various R&D teams and develop features for our customers.

Provide constructive feedback to engineering and marketing regarding products requirements.

We are looking for an experienced Team Lead for the NIC FW verification infrastructure team. In this role, you will lead the verification infrastructure - ensuring testing infrastructure stability, scalability, and continuous improvement - while guiding the development of advanced modules and methodologies. You will be responsible for driving the teams technical direction, supporting the evaluation of data and control path for new features, and ensuring high-quality deliverables that meet the expectations of industry-leading customers. As a leader, you will mentor and grow a team of engineers, foster a culture of ownership and execution, and collaborate closely with NVIDIAs networking NIC FW teams.

What you will be doing:

Lead and drive team execution end-to-end, combining managerial ownership with hands-on technical contribution - including ownership of the verification testing domain, its flows, coverage and the regression cycle.

Develop deep expertise in NVIDIA technologies, with a strong focus on FW functionality with corresponding interfaces with HW and SW.

Drive team execution by setting clear priorities, removing blockers, and ensuring high-quality, timely delivery - while maintaining a high bar for technical excellence and clearly communicating priorities, trade-offs, and status to stakeholders.

Define and continuously improve testing methodologies, including leading retrospectives for missed bugs to identify gaps - driving actionable changes to test coverage, flows, and verifiers.

Act as a technical leader within the team, contributing to design discussions, mentoring engineers, and actively participating in high-level design and code reviews.

We are looking for an outstanding engineer to join our software architecture group and help shape the next generation of our networking products, SmartNICs, and DPUs. In this role, you will work closely with system architects, software/firmware engineers, hardware designers and product stakeholders to define component-level and system-level solutions for advanced datacenter platforms.

You will join a team working at the intersection of AI networking, virtualization, operating systems, security, management, and programmable acceleration. Our mission is to push the boundaries of modern datacenter infrastructure and help define the platforms of tomorrow.

What Youll Be Doing:

Work with architects and engineers to define software architecture for our networking devices, SmartNICs, and DPUs.

Analyze system requirements across networking protocols, virtualization, operating systems, security, management, and services.

Research new ideas, evaluate design alternatives, and build proof-of-concept models, simulations, and prototypes.

Collaborate with software, firmware, and hardware teams on HW/SW co-design, performance, scale, and resource-utilization challenges.

Learn complex datacenter technologies and turn them into clear architecture proposals, design documents, and technical presentations.

We are looking for an outstanding Senior Networking Software Architect to join the NIC/DPU Software and Firmware Architecture group. In this role, you will help define the next generation of our datacenter and AI networking platforms, with focus on DPU management, QoS, performance, telemetry, and software architecture across stacks. You will work closely with hardware designers, firmware/kernel driver teams, system engineers, validation, product management and customers. The role spans early architecture definition, pre-silicon design, bring-up, and production readiness for large-scale AI and cloud datacenter deployments.

What Youll Be Doing:

Own software and system architecture for next-generation DPU management, QoS, performance, telemetry, and observability features.

Define end-to-end control and management flows across DOCA, host drivers, embedded firmware, BMC, management controllers and external management systems.

Specify telemetry and observability requirements, including counters, logs, traces, events, health monitoring, debug data, and streaming telemetry.

Define management interfaces and APIs for configuration, provisioning, lifecycle operations, diagnostics, and field serviceability.

Write clear architecture specifications, interface definitions, flow diagrams, and design documents for software, firmware, and system teams.

Partner with R&D teams to translate high-level architecture into implementable designs and guide features through development, validation, silicon bring-up, and production.

Analyze system performance bottlenecks, interoperability issues, telemetry gaps, and customer-reported issues, then feed learnings into future architecture.

Collaborate with system and cluster architects to ensure NIC/DPU features fit end-to-end AI datacenter and cloud networking designs.

We are seeking a highly skilled and versatile Performance Research and Analysis Manager to join our Performance Group. This role will drive end-to-end performance strategy and execution for next-generation our data centers and solutions based on GPU systems, NIC, Switch, DPU and Networking technologies. The ideal candidate will oversee, evaluating, and optimizing end-to-end AI GPU cluster-level performance for scaling out large scale distributed training and inference jobs communication. The role will focus heavily on RDMA, Networking Protocols, Collective Communication, Congestion Control, and Load Balancing algorithms. Secondarily, you will lead our DPUs and Storage technologies for N-S use cases to support AI Inference jobs. Third, you will drive our Performance Dashboards and Observability for cluster-level performance analysis from a stream line telemetry across NICs, Switches, GPUs, and NVlink.

What you'll be doing:

Drive end-to-end performance strategy, characterization, test plans, and optimization for next-generation our AI GPU clusters, focusing on large-scale distributed training and inference workloads.

Deeply evaluate and optimize our Networking core technologies performance, including RDMA/PRDMA, networking protocols, collective communication (NCCL), congestion control, and load-balancing algorithms.

Work on performance research and analysis of NVIDIA DPUs and storage technologies in North-South (N-S) use cases and deployment scenarios to maximize performance and efficiency for AI inference jobs.

Drive the strategy for performance observability and dashboards across next-generation NVIDIA data center solutions and supercomputers by leveraging scalable, streamlined telemetry pipelines to build performance dashboards and automated analytics based on real-time performance metrics across NICs, Switches, GPUs, and NVLink boundaries.

Perform deep root-cause analysis (RCA) on complex multi-node performance bottlenecks, driving actionable mitigation plans across hardware, firmware, and software teams.

We are seeking a Senior System Management Architect to lead the management architecture for our advanced SmartNIC cards. You will be the resident expert for SmartNIC system management, ensuring that NIC ASICs, Baseboard Management Controllers (BMCs), MCUs, CPUs, and CPLDs operate in perfect unison. You will own the lifecycle management specifications for SmartNIC platforms-from factory provisioning and day-one deployment to complex orchestrated reset flows and secure recovery. If you are someone who enjoys looking at a high-level system diagram and then immediately diving into the I2C/I3C bus topologies and PLDM command structures required to make it work, this role is for you.

What you'll be doing:

System Architecture & Flow Definition: Define and document comprehensive production, provisioning, update, recovery and reset flows for SmartNIC cards. Crucially, you will ensure that these board-level architectural decisions perfectly align with and support overarching platform-level needs, orchestrating seamless coordination between the NIC ASIC, BMC, CPU, and peripheral components.

Security & Provisioning: Specify security provisioning flows including OTP fusing, secure boot enablement, attestation key injection, certificate chain management, RPMC key derivation, and PQC (Post-Quantum Cryptography) requirements. Define IPN-to-OPN transition and component locking procedures.

Protocol Implementation & Guidance: Specify the use of standard management protocols (MCTP, PLDM, SPDM, NC-SI) across internal board interfaces to achieve secure boot, firmware updates, and telemetry gathering.

Hardware/Software Intersect: Dive deep into device-level hardware and software behaviour. Define CPLD logic requirements, power-sequencing dependencies, and reset orchestration (e.g., handling PCIe PERST#, SBR, and forced resets) for multi-host and standalone SmartNIC environments.

Interface Management: Architect intra-board communication pathways using PCIe, I2C/I3C, USB, and SPI, ensuring robust out-of-band (OOB) and in-band management connectivity.

Cross-Functional Leadership: Collaborate tightly with Production teams, Hardware and Firmware Engineering, NIC FW/Driver teams, and QA to translate your architectural specifications into implementable, testable realities.

Technical Documentation: Author rigorous technical specifications, test plans, and architectural design documents to guide both development and factory production.

Our Networking Product Engineering is looking for a Development Quality Manager to join the NPE management team and lead quality methodology across a broad engineering organization.

In this role, you will define and drive the quality operating model across product development, design, validation, NPI, manufacturing transfer, and field-learning interfaces. You will work across teams that develop products as well as internal engineering deliverables such as test boards, testers, and validation infrastructure, ensuring that quality is designed in from concept through production and beyond.

This is a high-impact leadership role for someone who can combine engineering depth, structured quality methods, and strong cross-functional influence.

What youll be doing:
Lead quality activities throughout the product lifecycle, from concept through NPI and manufacturing transfer.
Define and improve development quality processes and frameworks across design, engineering, test, and V&V.
Participate in design reviews, providing quality input and milestone-readiness guidance.
Lead risk management activities, including FMEA and preventive quality methods.
Drive root-cause investigations and ensure effective CAPA implementation and closure.
Define, monitor, and report quality KPIs to NPE leadership.
Collaborate with R&D, reliability, manufacturing, supply chain, and operations partners.
Support audits and ensure compliance with internal and external requirements.
Serve as the primary NPE interface to Hardware and Operations Quality teams, driving organizational learning and governance across test assets.

We are looking for a forward-thinking, focused, analytical and motivated Senior Sourcing Program Manager to join the Sourcing Team. As part of the Sourcing Team youll be in charge of products material supply chain and cost targets.

What you'll be doing:

Full responsibility of products materials sourcing and supplier management

Assist Engineering designing in preferred supplier products for our innovative devices

Manage vendors' business relationships and all aspects of commercial engagements.

Responsible for Product cost and supply management Multiple teamworks with CMs, suppliers and our internal teams (R&D, Operations, Finance, Sales).

Develop, modify, and implement commodity strategy to align with our needs.

Analyze suppliers' landscape including components, modules, and CM spaces to ensure we are aligned with the best suitable partners.

Our System Product Engineering team is looking for a QA Engineer to join us and help validate the software infrastructure used by multiple teams across the organizations. This role focuses on testing internal tools, backend services, workflows, automation, and the systems that support our validation processes. You will work closely with developers, infra teams, and validation engineers to ensure that our internal software is stable, reliable, and easy to use. You will contribute to building robust test coverage, improving automation, analyzing logs and test results, and driving quality throughout the development cycle.

What youll be doing:

Plan, execute, and analyze functional, integration, and regression tests for internal infrastructure software.

Develop and maintain automated test cases and test flows.

Validate backend services, data pipelines, web tools, and internal workflows.

Investigate failures, collect logs, reproduce issues, and work with developers to identify root causes.

Review and validate new features before release, ensuring they meet quality and usability expectations.

Support CI/CD flows by monitoring automated tests and contributing to improvements.

Document test scenarios, edge cases, and validation coverage.

Provide continuous feedback to developers and infra teams to improve quality and reliability.

We are looking for a passionate Senior Software Engineer to join our Simulation development team. Our team is growing, and we are looking for hardworking and experienced engineers to take part in building advanced networking simulation solutions. You will be part of a team developing next generation NIC and Switch simulation, works closely with other SW R&D teams and SW Architects.

What you will be doing:

Design and develop advanced features simulating our world class Switches.

Develop solutions using advanced virtualization technology.

Write clean, efficient and maintainable code.

Collaborate with team members, SW R&D, Architects, Chip Design and FW.

We are seeking an exceptional Network Engineer to join the Vertical Verification Group. As a senior engineer, you will contribute to the Vertical Verification work, concentrating on validating and improving complex Ethernet and InfiniBand systems within our Data Center and HPC environments.

You will play a key role in testing advanced networking features, building complex customer-like topologies, and ensuring our products meet industry-leading benchmarks of performance, efficiency, and quality. You will collaborate closely with architects, software engineers, and hardware teams across NIC, HCA, switches, CPUs, and GPUs in a fast-paced and highly technical environment. This is an outstanding opportunity to join a highly skilled team and contribute significantly to groundbreaking technology!

What youll be doing:
Review architecture, build, and requirements for new networking features across Ethernet and InfiniBand portfolios.
Compose and build complex testbed topologies that emulate customer environments.
Implement, run and optimize integration test plans including functional, regression, and performance testing.
Identify, reproduce, and debug issues; work closely with R&D to drive root cause analysis and resolution.
Collaborate with automation teams.
Analyze and optimize network performance, latency, and efficiency.
Provide clear status updates, reports, and insights on system quality and performance.

We are looking for a Senior Opto-mechanical failure analysis expert to join our mechanical engineering department as a key player in the development of next generation high-performance Telecommunication solutions for data centers. This key position includes close interaction with HW, NPI, Thermal, Layout, Quality and Supply chain teams.

What youll be doing:

Lead multidisciplinary investigations for advanced opto-mechanical and electro-mechanical products, including PCB/PCBA assemblies and complex system integrations.

Drive debug activities, perform hands-on root cause analysis on field returns, reliability failures, manufacturing defects, and system-level issues using analytical and laboratory techniques.

Join and lead task forces to investigate and support production excursions, failure analysis and reliability issues.

Work closely with Mechanical, Electrical, Signal Integrity, Thermal, Reliability, and Manufacturing Engineering teams to identify corrective and preventive actions.

Perform and drive mechanical simulations of components and assemblies to support failure analysis, root cause investigations, and product design optimization.

Develop failure analysis methodologies, documentation standards, and best practices to improve product robustness and reliability.

Present technical findings and recommendations to cross-functional engineering and management teams.

Our Networking division is looking for an excellent Senior System Validation Engineer!

Our Networking division is a leading supplier of innovative end-to-end InfiniBand and Ethernet connectivity solutions and services for servers and storage. We offer market-leading solutions that include adapter cards, switches, cables, and software to support networking technologies. Our products optimize data center performance and deliver industry-leading bandwidth and scalability. In addition, we serve a wide range of markets including high-performance computing, enterprise, data centers, cloud computing, big data, and Web 2.0. We are constantly reinventing ourselves to stay ahead of the market and bring groundbreaking products and services to the industry.

What you'll be doing:

Test Verification and Validation (both HW and SW).

Maintain products quality by improving test stability, coverage, design, and manufacturing process in Mass Production.

Execute tests in different scopes such: as regression, performance degradation, functional, and security; report the progress of testing and provide summary reports of the activity.

Troubleshooting and streamlining/optimizing our testing procedures.

Support Mass production matters.

Debugging production bugs and solving them.