דרושים » חומרה » RF/HW & System Validation Engineer

We are seeking a Senior RF Systems & Design Engineer to join our RF team and help architect and industrialize our next-generation Counter-UAS (C-UAS) multi-product hardware ecosystem. In this role, you will bridge the gap between high-level Software-Defined Radio (SDR) concepts and high-yield mass production. You will guide modular architectural layouts, define core interfaces for internal and external sensors, implement critical DFx methodologies, and mentor junior talent within an evolving, fast-paced technical landscape
Key Responsibilities
1. Architecture & System-Level Design
Architect modular, RF transceiver systems and define cascading link budgets (NF, Gain, IP3, P1dB) from antenna to converter.
Design advanced wideband SDR front-ends and direct RF sampling topologies tailored to defeat dynamic threats.
Establish Interface Control Documents (ICDs) and hardware abstraction standards to seamlessly integrate 3rd-party subsystems (Radar, EO/RF).
2. Detailed HW Design, Simulation & Validation
Lead schematic capture, high-frequency/high-density PCB layout supervision, and component choices (PAs, LNAs, synthesis filters).
Perform electromagnetic and circuit-level modeling (ADS, HFSS, or equivalent) to resolve structural EMI/EMC and co-site isolation issues.
Formulate strict engineering Verification & Validation (V&V) plans, overseeing environmental and compliance certifications.
3. DFx & Production Scale-Up
Champion Design for Manufacturing/Assembly/Test (DFM/DFA/DFT) workflows to ensure stable, repeatable high-yield production loops.
Define line-calibration algorithms, built-in self-tests (BIST), and leverage Statistical Process Control (SPC) data to reduce production and field escalations.
4. Leadership & Mentorship
Collaborate across disciplines (Mechanical, Digital, Cyber-Software) to systematically resolve thermal, power, and high-speed noise friction points.
Act as a primary technical mentor for junior engineers, implementing standard product lifecycle (PLC) gating and best practices.

We are seeking a high-caliber, multidisciplinary Hardware Systems Architect & Tech Lead to serve as the technical cornerstone of our hardware development and system integration.
In this role, you will bridge high-level system requirements with physical deployment reality, acting as the designated "Tech Lead" driving day-to-day engineering execution.
This role demands a "System of Systems" mindset. Beyond engineering our core SDR and RF hardware architectures, you will orchestrate the physical, logical, and electrical integration of complex tactical sensor suites - incorporating software-defined radios, active/passive radar arrays, electro-optical (EO/IR) cameras, and jamming payloads.
You will steer the hardware through its entire lifecycle (PLCM) while implementing flawless Design for Excellence (DFx) frameworks.
KEY RESPONSIBILITIES:
System of Systems Integration: Architect, model, and define hardware-level interfaces and high-speed data flow paths for multi-sensor integration (SDR, Active/Passive Radar, EO/IR Cameras, and RF Jamming payloads).
Requirements Definition: Translate high-level operational and product demands into detailed, actionable hardware and system-level requirements, Interface Control Documents (ICDs), and structural specifications.
System Modeling: Establish and manage rigorous physical power, thermal, high-speed data bandwidth, and RF link budgets for deeply integrated tactical configurations.
Technical Ownership: Direct day-to-day engineering activities, lead comprehensive design reviews, and serve as the final authority on architectural and hardware design trade-offs.
Product Lifecycle Management (PLCM): Guide hardware products smoothly through the entire lifecycle-from early concept and prototyping to mass production, validation, field deployment, and subsequent obsolescence management.
Cross-Functional Orchestration: Align and coordinate specialized teams across RF/Analog, high-speed digital, FPGA, embedded software, and mechanical engineering to achieve seamless hardware/software synergy.
Test Strategy Definition: Architect and define the end-to-end testing, verification, and validation (V&V) strategy for complex hardware-software systems.
Progressive Integration: Design and oversee methodical integration plans, successfully migrating subsystems from standalone bench testing to full "System of Systems" integration.
System Verification: Oversee high-reliability Hardware-in-the-Loop (HIL) testing, RF performance verification, and automated test regression setups.
Operational Validation: Partner with field testing and QA teams to design real-world tactical validation scenarios (including drone flight trials and complex RF interference environments) to ensure top performance in the field.
DFx Implementation: Drive critical design decisions optimizing for manufacturability (DFM), automated testing (DFT), reliability (DFR), and target cost (DFC) without sacrificing tactical performance.

We are looking for a highly skilled RF Test Automation Developer to join our R&D Integration Automation team.
This role is focused on designing, developing, and maintaining advanced automation solutions across unit, integration, system, and end-to-end testing levels.
The ideal candidate is a hands-on developer with strong expertise in Python and Pytest, experienced in building and executing automated tests, and comfortable working with modern CI/CD pipelines and automation tools.
The Senior Developer will act as a technical mentor and key contributor, ensuring best practices are followed and test automation is seamlessly embedded into the development lifecycle.
Knowledge of RF systems is a strong plus.
Key Responsibilities:
Develop and maintain automated RF test development tools using Python and other relevant programming languages.
Configure, calibrate, and operate RF test equipment such as Vector Signal Generators (VSGs), Spectrum Analyzers (SAs), and related instruments.
Create and validate RF test setups for performance validation, debug, and system characterization.
Analyze test results, generate comprehensive reports, and present findings to cross-functional teams.
Collaborate with hardware and software engineers to integrate automated RF testing into the product development cycle.
Stay current with emerging RF technologies and testing methodologies, proposing and implementing improvements to existing test processes.
Contribute to the development of RF testing strategies aligned with R&D goals and product roadmaps.
Research and introduce innovative RF automation tools, frameworks, and workflows aligned with R&D goals.

Required Radar & Cyber System Engineer
Scope:
As a Systems Engineer, you will bridge the gap between high-level concepts and real-world execution. You will lead multi-system features from initial idea to release, acting as the key integrator across multiple internal systems developed by our various R&D teams, while also bridging the technical gap with external vendors to bring our unified technology to life in the field.
Key Responsibilities:
Lead complex, multi-system features and platforms from initial concept through design, implementation, and release.
Analyse, define, and debug complex system behaviours, state machines, algorithms, and event-response logic (including radio link budget considerations).
Define requirements and guide multi-disciplinary teams-spanning both our internal engineering groups (SW, HW, Modem, DSP, FPGA) and external vendors-through implementation, debugging, and integration.
Lead the integration of internal subsystems and optimize the integration of external vendor technologies.
Perform independent, hands-on debugging using Python or Matlab and log analysis tools.
Actively participate in, guide, and lead lab and field testing, validation, and system optimization both in the lab and in outdoor environments.

We are looking for an experienced system engineer to participate and lead the development of a radio-based drone detection and mitigation system as part of the company products.
Responsibilities:
Lead features and platforms from ideas to releases.
Guide and participate in the research and analysis of both proprietary and standard radio communication
protocols.
Develop and optimize algorithms for scanning, signal separation, antenna selection, etc.
Define requirements and guide other multi-disciplinary teams (SW, Modem algorithms, DSP, and FPGA) through
implementation and debugging.
Analyze and define complex system behaviors, state machines, algorithms, and event-response logic, including
radio link budget considerations.
Perform independent, hands-on debugging and optimization for system problem-solving using tools like
MATLAB, Python, Excel, and other log analysis software.
Gain a deep understanding of the full system to guide and support development, testing and validation teams.

We are seeking a talented, high-speed board design expert to own the detailed implementation and industrialization of our next-generation Counter-UAS (C-UAS) processing units.
As we scale to a complex, multi-product ecosystem featuring deep multi-sensor fusion, you will actively participate in shaping digital hardware architectures while leading the hands-on engineering from schematic design to mass production.
This position demands deep expertise in complex, multi-layer carrier board design specifically utilizing Intel processors and COM Express (COMe) architectures, as well as robust simulation and production methodologies.
Key Responsibilities:
Hardware Design Execution: Own the full lifecycle of complex digital hardware boards from schematic capture, component selection, and power distribution network (PDN) design through to high-yield mass production.
Architecture Collaboration: Actively participate in defining the digital hardware architecture, collaborating closely on modular computing strategies, baseboard optimizations, and multi-sensor integration.
Intel & COM Express Integration: Lead the detailed layout and integration of high-performance Intel processors and COM Express (COMe) form factors, managing complex, dense high-speed buses (PCIe Gen 4/5, DDR4/DDR5, 10GbE, USB4).
Simulation & Signal Integrity: Execute rigorous pre- and post-layout Signal Integrity and Power Integrity (SI/PI) simulations to guarantee precise timing margins, stable power delivery, and low-noise performance on dense, fine-pitch BGA footprints.
Production Scale-Up & DFx: Champion Design for Excellence (DFM, DFA, DFT) methodologies, boundary-scan testability, and detailed verification hardware documentation to ensure flawless transfer to manufacturing lines and eliminate field escalations.
Cross-Discipline Collaboration: Work closely with subcontractors (layout) and other R&D disciplines-including FPGA, Embedded SW, Cyber, and Mechanical engineering-to resolve interdisciplinary space, thermal, and noise constraints.

Join an agile team working on the most advanced wireless communication solutions, focused on the latest communication standards. You will define the architecture for future products and optimize modem solutions for hardware implementation.

Responsibilities:

Research and define architecture for advanced communication standards.

Define PHY System specifications and architecture for future solutions.

Define low-power architecture.

Work closely with the functional teams (Algorithm, HW/SW, RF, Validation, etc.), from early algorithm study to system validation.

Participate in integration and testing of wireless system solutions, spanning embedded SW, HW and radio.

Support customers engagement and product deployment.

Our HW team in Israel is looking for an experienced System Engineer to join the Hardware Switch Group. The team leads the development of networking infrastructure for our next-generation data centers focusing on accelerated performance while enabling optimized end to end GPU connectivity.

What you'll be doing:
CPO (Co Package Optic) Switch System architecture and design from concept to mass production.
Define the HW requirement, HW arch, board partition and lead electro-optic-mech concept. In addition - design/review HW aspects such as schematics, component selection, layout, opto-mechanics, DFM/T.
Collaborate and integrate with all HW project fields: Board Design, Mechanics, Thermal, Production, Software/Firmware, RTL and more.
The position consists of hands-on testing in lab environment for electrical and optical integration & validation, including problem solving while accompany production and qualification process.

The System team defines and develops cutting-edge 5G technology. In this role, you will lead the system team responsible for defining our next-generation modem products and developing modem algorithms, working at the intersection of research, system design, and implementation.

Responsibilities

Lead a team of senior system and algorithm engineers responsible for developing innovative 5G modems.

Partner closely with VLSI and SW teams implementing the modem HW and SW and align on system definitions with implementation constraints.

Develop and maintain deep expertise in cellular standards and their implications for modem design.

Lead system and algorithmic research, balancing trade-offs between DSP/SW/HW implementations, performance, implementation cost, real-time constraints, and time-to-market.

Own system definitions, requirements, and implementation from initial research through simulation to official release, including MATLAB/C/C++/SystemC modeling and specification documentation.

Mentor and grow team members, fostering technical excellence and professional development.

Required Staff GPU Verification Engineer
Join our GPU Hardware Verification team in Raanana, Israel, and help shape the future of the world's most widely deployed GPU architecture - Mali. As a Staff Hardware Verification Engineer, you will play a key technical role in verifying advanced GPU components and subsystems, working alongside architects, designers and verification engineers to deliver high-quality, industry-leading graphics technology. You'll contribute to complex verification environments, solve challenging technical problems and help drive continuous improvements to our verification methodologies and flows.
Responsibilities:
Develop and execute verification plans for advanced GPU components and subsystems.
Develop and maintain AI tools, agents, and skills to support our engineering teams and workflows.
Build, maintain and enhance robust verification environments using SystemVerilog and UVM.
Apply coverage-driven, constrained-random and, where appropriate, formal verification techniques to achieve comprehensive functional coverage.
Debug complex functional issues and work closely with Design and Architecture teams to identify and resolve root causes.
Contribute to block-level and system-level verification, including environment integration and regression analysis.
Improve verification methodologies, automation, scripting and continuous integration flows to increase quality and efficiency.
Participate in verification reviews and support verification sign-off activities.
Share technical knowledge and collaborate with colleagues across the wider GPU engineering organisation.