דרושים » חומרה » RF Automation Developer Engineer

Required RF/HW & System Validation Engineer
Scope:
As an RF/HW Validation Engineer, you will bridge the gap between HW/RF validation and complex system-level testing. You will design, develop, and execute automated and manual test plans to verify the performance, reliability, and compliance of our SDR (Software Defined Radio) architectures and multi-layered tactical systems (including integration with other systems).
Key Responsibilities:
System-Level Testing: Execute end-to-end system testing of counter-drone platforms, verifying the integration of RF hardware, firmware, and complex software-defined radio algorithms under real-world scenarios.
Hardware Product Testing: Test and validate various HW products, including antennas, radar systems, jammers, and related peripherals.
Failure Analysis & Troubleshooting: Debug complex RF anomalies, signal integrity issues, and system bugs down to the component/board level, working closely with RF Design, Board Design, and SW teams.
Documentation: Create comprehensive test plans (ATP/DTP), write test reports, and present data-driven analysis to cross-functional R&D teams to impact the next generation of hardware.

We are seeking a Senior RF Systems & Design Engineer to join our RF team and help architect and industrialize our next-generation Counter-UAS (C-UAS) multi-product hardware ecosystem. In this role, you will bridge the gap between high-level Software-Defined Radio (SDR) concepts and high-yield mass production. You will guide modular architectural layouts, define core interfaces for internal and external sensors, implement critical DFx methodologies, and mentor junior talent within an evolving, fast-paced technical landscape
Key Responsibilities
1. Architecture & System-Level Design
Architect modular, RF transceiver systems and define cascading link budgets (NF, Gain, IP3, P1dB) from antenna to converter.
Design advanced wideband SDR front-ends and direct RF sampling topologies tailored to defeat dynamic threats.
Establish Interface Control Documents (ICDs) and hardware abstraction standards to seamlessly integrate 3rd-party subsystems (Radar, EO/RF).
2. Detailed HW Design, Simulation & Validation
Lead schematic capture, high-frequency/high-density PCB layout supervision, and component choices (PAs, LNAs, synthesis filters).
Perform electromagnetic and circuit-level modeling (ADS, HFSS, or equivalent) to resolve structural EMI/EMC and co-site isolation issues.
Formulate strict engineering Verification & Validation (V&V) plans, overseeing environmental and compliance certifications.
3. DFx & Production Scale-Up
Champion Design for Manufacturing/Assembly/Test (DFM/DFA/DFT) workflows to ensure stable, repeatable high-yield production loops.
Define line-calibration algorithms, built-in self-tests (BIST), and leverage Statistical Process Control (SPC) data to reduce production and field escalations.
4. Leadership & Mentorship
Collaborate across disciplines (Mechanical, Digital, Cyber-Software) to systematically resolve thermal, power, and high-speed noise friction points.
Act as a primary technical mentor for junior engineers, implementing standard product lifecycle (PLC) gating and best practices.

Required System QA Engineer
The Mission
Your role is to ensure the operational stability and resilience of the Applications Ecosystem, encompassing National C2, MSC2, and Edge C2 platforms. You will rigorously test the seams where these distributed systems integrate. You are expected to execute with precision, learn the architecture deeply from the ground up, and evolve into the Domain Expert
for our multi-tiered command and control system. Critically, you will champion a "Shift-Left" quality approach: preventing defects during the design and planning phases rather than merely catching them after development is complete.
Core Responsibilities:
Actively participate in Product Requirements(PRD), High-Level (HLD) reviews to enforce system testability before code is written.
Execute and automate comprehensive test plans across Edge C2 nodes, MSC2 instances, and National C2 cloud environments.
Validate complex data flows and state synchronization across geographically distributed components.
Simulate degraded network conditions, forced disconnects, and VPN tunnel collapses to validate system recovery and data integrity.
Isolate integration breakdowns between Web Applications and backend microservices.
Analyze complex system logs using modern observability tools to provide developers with exact root-cause indicators and precise reproduction steps.
Integrate automated test suites into the CI/CD pipeline to ensure continuous validation.
Maintain clear, artifact-based documentation of test coverage, system behavior, and defect tracking.

We are seeking a highly skilled Senior Communication PHY Algorithms Engineer.
This senior role is focused on the end-to-end research, design, and implementation of digital receivers for proprietary drone communication signals.
Responsibilities:
Mathematically characterize complex communication and signal detection problems. Analyze and assess design trade-offs based on both performance metrics and implementation complexity.
Develop and maintain simulations using MATLAB and Python.
Design digital receiver modules to be implemented either by FPGA of SW.
Implement features directly in SW or technically lead and verify the FPGA implementation efforts of the FPGA engineer.
Accompany the integration process of the feature until its end-to-end operation.

We are seeking a Communication PHY Algorithms Engineer.
This role is focused on the end-to-end research, design, and implementation of digital receivers for proprietary drone communication signals.
Responsibilities:
Mathematically characterize complex communication and signal detection problems. Analyze and assess design trade-offs based on both performance metrics and implementation complexity.
Develop and maintain simulations using MATLAB and Python.
Design digital receiver modules to be implemented either by FPGA of SW.
Implement features directly in SW or technically lead and verify the FPGA implementation efforts of the FPGA engineer.
Accompany the integration process of the feature until its end-to-end operation.

We are looking for an experienced system engineer to participate and lead the development of a radio-based drone detection and mitigation system as part of the company products.
Responsibilities:
Lead features and platforms from ideas to releases.
Guide and participate in the research and analysis of both proprietary and standard radio communication
protocols.
Develop and optimize algorithms for scanning, signal separation, antenna selection, etc.
Define requirements and guide other multi-disciplinary teams (SW, Modem algorithms, DSP, and FPGA) through
implementation and debugging.
Analyze and define complex system behaviors, state machines, algorithms, and event-response logic, including
radio link budget considerations.
Perform independent, hands-on debugging and optimization for system problem-solving using tools like
MATLAB, Python, Excel, and other log analysis software.
Gain a deep understanding of the full system to guide and support development, testing and validation teams.

Required Radar & Cyber System Engineer
Scope:
As a Systems Engineer, you will bridge the gap between high-level concepts and real-world execution. You will lead multi-system features from initial idea to release, acting as the key integrator across multiple internal systems developed by our various R&D teams, while also bridging the technical gap with external vendors to bring our unified technology to life in the field.
Key Responsibilities:
Lead complex, multi-system features and platforms from initial concept through design, implementation, and release.
Analyse, define, and debug complex system behaviours, state machines, algorithms, and event-response logic (including radio link budget considerations).
Define requirements and guide multi-disciplinary teams-spanning both our internal engineering groups (SW, HW, Modem, DSP, FPGA) and external vendors-through implementation, debugging, and integration.
Lead the integration of internal subsystems and optimize the integration of external vendor technologies.
Perform independent, hands-on debugging using Python or Matlab and log analysis tools.
Actively participate in, guide, and lead lab and field testing, validation, and system optimization both in the lab and in outdoor environments.

We are looking for a motivated Hardware Engineer to join our Hardware team in Raanana.

You will have the chance to develop your own skills in a flexible and energetic work atmosphere with friendly and experienced colleagues. You will have helpful supervision, opportunity to learn, modern tools and flexible work culture.

If you want to be a part of our growing company that is driven by innovation and is focused on building a future together with our employees, consider applying.

Principle duties and responsibilities:

Design hardware modules, subsystems and systems for synchronization products.

Develop schematics and guide PCB layout (high-speed, mixed-signal, power).

Select and evaluate components (ICs, power devices, oscillators, interfaces).

Design high-speed interfaces (e.g., 10G/25G Ethernet) with signal integrity considerations.

Contribute to hardware design specifications (HDS) and documentation.

Support system-level integration (HW, FPGA, SW).

Define and execute validation and integration test plans.

Debug complex board and system-level issues (mixed-signal, high-speed).

Perform lab bring-up, measurements, and performance characterization.

Support product transfer to manufacturing (NPI).

Collaborate with manufacturing and test teams for production readiness.

Investigate and resolve issues during production and field operation.

Ensure product reliability, quality, and compliance with applicable standards.

Functional Collaboration.

Work closely with FPGA, software, system, SIT/SVT and mechanical teams.

Participate in design reviews and technical discussions.

Interface with suppliers and external partners as required.

Evaluate and introduce new technologies and components.

Drive improvements in performance, power efficiency, and cost.

Contribute to system architecture discussions and design trade-offs.

We are looking for an Infrastructure Team Leader to lead and manage a highly skilled team of 4-5 engineers, responsible for Emulation, CAD, DevOps, compute infrastructure, and automation.
This role combines 50% hands‑on and 50% manageiral technical leadership and end‑to‑end ownership of infrastructure, tooling, and release flows.
The position has a significant impact on productivity, quality, and time‑to‑market of the companys silicon products and is reporting directly to the director of the department.
Responsibilities
Lead and mentor the Infrastructure team, including CAD, DevOps, automation, and emulation activities.
Own the definition, development, and maintenance of infrastructure: Emulation, design flows, verification flows, releases, automation, TFS Azure DevOps and CI/CD pipelines.
Drive continuous improvement of infrastructure reliability, performance, scalability, and usability.
Take end‑to‑end responsibility, cross BU, cross site VLSI releases, environments, and production readiness.
Collaborate closely with different stakeholders in the HW and SW RnD teams to align infrastructure with project needs.

We are looking for somone to join our WiFi hardware team.
Our team operates in an AI-driven environment where we leverage cutting-edge AI tools to enhance productivity, code quality, and reduce development timelines. You'll be expected to actively utilize and promote AI-assisted development practices within the team.
What you'll do:
In this role, you will work on defining, developing and debugging validation environments for TIs wireless MCU products targeted at Industrial markets. You'll Deep dive into both low level and system level modules, ensure compliance with specifications, collaborate with experienced software, Architecture, design and verification teams and build your skills through hands-on projects and dedicated mentorship.