דרושים » חשמל ואלקטרוניקה » Integration Engineer- North

We are looking for an Electrical & Electronics Practical Engineer to join our R&D department in Kfar Saba.
This is a varied, technical role supporting development, integration, testing, and troubleshooting of electronic systems - an opportunity to grow professionally while working on challenging, advanced projects.
About us
An established technology company specializing in motion control and intelligent power management systems.
We develop and manufacture advanced motor controllers, power management systems, and smart circuit protection solutions tailored to the unique requirements of the defense and industrial markets.
What will you do?
Provide ongoing support to the development team in development, integration, and testing
Perform hardware testing and troubleshooting of electronic boards and systems
Analyze faults, perform root-cause analysis, and propose solutions to hardware issues
Read and interpret electrical drawings and electronic schematics
Perform measurements and tests using lab equipment such as DMMs, oscilloscopes, power supplies, spectrum analyzers, and other instruments
Perform lab tests and functional checks on products and systems
Support product qualification, verification, and validation testing
Document test results, faults, and solutions
Write and update technical documents, test procedures, and reports
Work closely with hardware, software, and systems engineers
What do we offer?
Work on advanced products and technologies
A professional, high-quality, and challenging working environment
Work within a multidisciplinary team
The opportunity to influence the development of new products
Location: Atir Yeda Industrial Zone, Kfar Saba, Israel
Position: Full-time, Sunday through Thursday
Responsibilities
Provide ongoing support to the development team in development, integration, and testing
Perform hardware testing and troubleshooting of electronic boards and systems
Analyze faults, perform root-cause analysis, and propose solutions to hardware issues
Perform measurements and tests using lab equipment (DMM, oscilloscope, power supplies, spectrum analyzer)
Support product qualification, verification, and validation testing
Document test results, faults, and solutions
Write and update technical documents, test procedures, and reports
Work closely with hardware, software, and systems engineers.

We are looking for an Electrical & Electronics Engineer to join our R&D department in Kfar Saba.
This is a varied, technical role supporting development, integration, testing, and troubleshooting of electronic systems - an opportunity to grow professionally while working on challenging, advanced projects.
About us
An established technology company specializing in motion control and intelligent power management systems.
We develop and manufacture advanced motor controllers, power management systems, and smart circuit protection solutions tailored to the unique requirements of the defense and industrial markets.
What will you do?
Provide ongoing support to the development team in development, integration, and testing
Perform hardware testing and troubleshooting of electronic boards and systems
Analyze faults, perform root-cause analysis, and propose solutions to hardware issues
Read and interpret electrical drawings and electronic schematics
Perform measurements and tests using lab equipment such as DMMs, oscilloscopes, power supplies, spectrum analyzers, and other instruments
Perform lab tests and functional checks on products and systems
Support product qualification, verification, and validation testing
Document test results, faults, and solutions
Write and update technical documents, test procedures, and reports
Work closely with hardware, software, and systems engineers

We are looking for a highly motivated, hands-on Senior Electrical Engineer to join our multidisciplinary engineering team.
In this role, you will take end-to-end ownership of electrical and control activities for complex multidisciplinary machines, from early-stage development and prototypes through integration, productization, and production support.
You will work closely with mechanical, software, systems, and other engineering disciplines, combining strong electrical design capabilities with hands-on PLC, integration, and troubleshooting experience.
What you will do:
Lead electrical and control design activities from concept through product implementation.
Develop, program, debug, and integrate PLC sequences, I/O, and motion control for lab setups, prototypes, and production machines.
Design electrical cabinets, cabling, and system connectivity, including component selection, cable routing, and integration.
Perform hands-on electrical integration, testing, troubleshooting, and modifications of machines and R&D platforms.
Collaborate closely with multidisciplinary engineering teams throughout the development lifecycle.
Support the transfer of new designs from R&D to production and provide ongoing engineering support for prototypes and medium-volume production machines.
Manage and work closely with subcontractors, electrical cabinet manufacturers, and suppliers.

We are looking for an experienced Electronics Engineer / Practical Electronics Engineer to join our multidisciplinary R&D team and support the development of advanced electro-optical systems.

In this role, you will be responsible for electronic board bring-up, debugging, repair, testing, calibration, and system integration. You will work closely with electrical, mechanical, and system engineers throughout the product lifecycle, from early prototypes to production and deployment.

This position is ideal for someone who enjoys practical engineering work, solving complex hardware issues, and working on mission-critical technologies in a dynamic development environment.



Responsibilities

Perform bring-up, debugging, validation, and repair of electronic boards for advanced electro-optical systems.
Troubleshoot analog, digital, power, and communication interfaces using oscilloscopes and other laboratory equipment.
Perform board-level modifications, rework, repairs, and validation according to engineering requirements.
Work closely with hardware design engineers to investigate failures, improve designs, and resolve technical issues.
Support PCB manufacturers and assembly partners throughout production, troubleshooting, and quality processes.
Execute and support environmental testing of electronic boards and electro-optical systems.
Collaborate with mechanical engineers on system integration, thermal considerations, cable routing, and assembly optimization.
Develop, document, and perform calibration procedures for electro-optical systems.
Document test results, failure analysis, corrective actions, and engineering activities.
Support continuous improvement of laboratory processes, production readiness, and engineering workflows.

We are seeking an experienced and innovative R&D System Scientist to join the System Engineering Stand-Alone team within the Research & Development organization. In this role, you will become an integral part of a multidisciplinary team of physicists and engineers responsible for developing advanced metrology technologies, from early-stage research through product delivery.
The team develops cutting-edge metrology solutions for the semiconductor industry, combining expertise in physics, optics, mechanics, electronics, motion control, algorithms, and software. You will lead complex system investigations, transform customer and business requirements into technical solutions, and drive scientific innovation that directly impacts our next-generation products.
Responsibilities
What you will be doing:
Perform theoretical and experimental systems engineering to support state-of-the-art new and existing multidisciplinary optical measurement products.
Define, lead, and oversee the implementation of innovative system solutions.
Collaborate with hardware, software, optics, and algorithm engineering teams to deliver multidisciplinary solutions.
Analyze complex datasets and perform advanced statistical evaluations to support product and technology development.
Investigate critical system behaviors, perform root-cause analysis, and establish robust mitigation and calibration methods.
Support product transfer to manufacturing, service, and production organizations while serving as a technical expert for complex challenges.
Translate customer needs and high-level requirements into detailed technical specifications and system designs.
Travel to customer sites worldwide as needed, approximately 2-3 times per year.

We are seeking an experienced and hands-on Junior System Engineer to take overall technical ownership of an existing multidisciplinary system-from production and integration through ongoing product and customer support. you will lead engineering efforts to solve complex system-level issues manage engineering change orders (ECOs) and provide technical support to production lines and clients You will work cross-functionally with Hardware, Firmware, Software, Mechanical, QA, and Production teams.
Key Responsibilities:
Support system integration, testing, and troubleshooting activities in the laboratory and production environment.
Perform hands-on debugging and fault isolation across hardware, software, FPGA, and embedded subsystems.
Operate test equipment, including oscilloscopes, digital multimeters, power supplies, and Automated Test Equipment (ATE).
Own technical problems end to end: identify the issue, isolate the root cause, and drive a practical solution through to implementation and verification.
Support production activities, investigate technical issues, and assist in resolving mechanical electrical and SW issues.
Maintain and update technical documentation, including test procedures, test reports, interface documentation, ECO, maintenance, and work instructions.
Support customer interface by drafting responses to technical queries and failure reports and joining technical reviews.

The Production team is looking for a Production Integration Engineer to join the integrated metrology line and work on state of the art tools in the semiconductor industry.
Your role will be to manufacture the company products while maintaining highest quality and on-time delivery.
As part of your job you will interact and work with the Engineering, R&D and QA departments to solve complicated on tool problems and test new tools and features as part of the transfer to production process.
Responsibilities
What will you be doing:
Lead tool manufacturing process from start to end (1-2 weeks project).
Integration of multidisciplinary systems (optical, electronic, pneumatic, computing, and mechanical) according to predefined procedures.
Ability to solve complex system challenges, constantly learning and striving to independence.
Working with engineering and R&D to address systems/production process challenges.
Addressing quality issues and repair recommendations for suppliers by nonconformance report.
Working in an organized way using digital procedures and flow management system.
Always striving to reduce cycle time and improve working process.
Helping and consulting team members to overcome challenges on their tools.

we are a leading company specializing in the development and manufacturing of autonomous drone systems. Its solutions combine hardware, software, and AI-driven technologies to support complex, large-scale operations. our company works primarily with defense industries, such as military and law enforcement agencies worldwide. The company is part of Ondas Holdings and operates as a wholly owned subsidiary.
In this role, you will be part of the electronics engineering team responsible for leading projects end-to-end, including electronics design, drafting, design verification testing, collaboration with internal departments, external suppliers, and supporting development and production phases
Responsibilities
Planning, executing, and documenting verification & validation (V&V) tests for electronic circuits, assemblies, and multidisciplinary systems
Performing functional, electrical, environmental, and integration tests for airborne and ground electronic systems
Preparing, executing, and documenting ATP (Acceptance Test Procedure) and validation test documents
Operating laboratory equipment such as oscilloscopes, spectrum analyzers, signal generators, power supplies, multimeters, and data acquisition systems
Performing hands-on debugging and troubleshooting of electronic boards, communication interfaces, cables, and system-level failures
Supporting integration, bring-up, and verification activities throughout development and production stages
Writing detailed test reports, validation summaries, failure analyses, and technical documentation
Working closely with hardware, firmware, system engineering, integration, manufacturing, and production teams
Supporting qualification, acceptance, and reliability testing processes מול customers, subcontractors, and internal teams
Managing laboratory activities, maintaining test setups, and supporting calibration and organization of lab equipment
Solving technical and system-level challenges under tight schedules and multidisciplinary constraints.

The Electronics Team is looking for an Electrical & Electronics tech Lead to support the development of next-generation metrology systems for semiconductor manufacturing. In this role, you will become an integral part of our R&D organization, contributing to the design, development, integration, and validation of advanced electrical and electronic systems used in ultra-high precision OCD metrology platforms.
Responsibilities
What will you be doing:
Design and develop analog, digital, mixed-signal, and electrical (AC/DC) subsystems for complex multidisciplinary products.
Design electronic boards and participate in schematic reviews, component selection, integration, validation, and production release activities.
Develop embedded firmware and engineering software tools for control, monitoring, automation, testing, and data acquisition applications.
Lead electrical integration activities from prototype phase through manufacturing transfer and product lifecycle support.
Prepare engineering documentation including specifications, schematics, wiring diagrams, test procedures, and design reports.
Participate in product specification reviews, architecture discussions, and multidisciplinary design reviews.
Collaborate with and lead external suppliers and manufacturers throughout development, qualification, and production activities.
Conduct hands-on laboratory testing, debugging, troubleshooting, root-cause investigations, and data analysis.
Lead technical development projects from initiation through successful delivery including supplier management.

At Infinidat, a Lenovo company, we empower enterprises and service providers with cutting-edge storage platforms that redefine performance, reliability, and cyber resilience at scale. We are looking for a Hardware Integration Engineer to join our expanding R&D team. In this role, you will collaborate with off-the-shelf component vendors to evaluate new technologies for integration into our products, qualify new hardware and firmware releases, and lead debugging efforts on complex technical issues. You will also provide hardware-focused support to internal teams, including Level 3 support, Manufacturing, R&D, QA, and IT.

Responsibilities:

* Demonstrate deep expertise in storage hardware products, including servers, drives, enclosures, and power components
* Evaluate and qualify new hardware components, actively participating in their integration into the product
* Collaborate with global vendors and cross-functional internal teams to enhance product quality and resolve complex technical issues
* Lead failure analysis investigations- both internally and with suppliers and drive corrective and preventive actions
* Manage and lead new and existing hardware projects, continuously exploring technologies and methodologies
* Maintain and update the hardware knowledge base using industry-standard tools (e.g., Jira, Google Sheets, etc.).