דרושים » הנדסה » Testers Jigs Support Engineer

We are looking for a Technical support to join our growing robotics startup. This role is hands-on and multidisciplinary, involving installation, maintenance, troubleshooting, and on-site support of complex robotic systems. The systems combine mechanics, hardware, electronics, and advanced software, and require strong system-level understanding. The position includes work at our companys facilities as well as international travel, primarily for system installations, demos, and field troubleshooting. As part of our rapidly growing, small, motivated, and multi-disciplinary team, this position is the first dedicated role in its domain, providing a unique opportunity to contribute to a new area within the company.

Responsibilities
Maintain, test, and troubleshoot robotic systems at the companys facilities.
Install, calibrate, and commission robotic systems at customer and partner sites abroad.
Lead on-site system setup and troubleshooting during demos and early deployments.
Diagnose and resolve hardware, mechanical, and software issues in the field
Perform hands-on replacement and repair of mechanical and electromechanical components.
Work closely with R&D teams (software, mechanical, electrical, algorithms) to deeply understand the system.
Gather knowledge from internal engineering teams and apply it independently in the field.
Provide technical feedback from the field to improve system robustness and usability.
Document issues, procedures, and best practices.

We are looking for a hands-on Mechanical Engineer to join our R&D team and contribute to the development of an advanced robotic platform for ophthalmic surgery.

The role involves designing, developing, and testing precision mechanisms and test systems as part of a complex, multidisciplinary medical device.

You will collaborate closely with engineers across multiple disciplines and take ownership throughout the development lifecycle-from initial concept and detailed design through prototyping, integration, testing, and transfer to production.

Responsibilities
Design and develop mechanisms, assemblies, and test rigs throughout the product development lifecycle-from concept generation and detailed design through prototyping, integration, verification, and transfer to production.
Design mechanical solutions incorporating motors, sensors, bearings, gears, and other precision components.
Develop and execute mechanical tests and experiments to evaluate design performance and verify engineering requirements.
Prepare and maintain engineering documentation, including drawings, calculations, test protocols, reports, and engineering change documentation.
Collaborate closely with systems, software, electronics, manufacturing, quality, and operations teams to develop multidisciplinary solutions.
Support hands-on prototype assembly, integration, troubleshooting, and testing.
Identify mechanical design challenges and develop practical, data-driven solutions.
Contribute to design reviews and the continuous improvement of products and development processes.

We are seeking an experienced and self-driven Senior Mechanical Engineer to join our Ultrasound Point of Care (POC) R&D team. In this role, you will be responsible for leading the mechanical design, development, verification, and transition to manufacturing (NPI) of compact ultrasound systems, consoles, and system accessories.
This position emphasizes complete end-to-end mechanical ownership-from initial conceptual design, detailed CAD modeling, and DFM to collaborating with external subcontractors, managing tooling approvals, and ensuring seamless integration on the manufacturing line.
Job Description
Key Responsibilities
Mechanical Design & Engineering: Drive the mechanical design and electronics packaging of compact ultrasound hardware, consoles, suspended masses, sheet metal structures, and custom system accessories from initial concept through mass production.
Subcontractor & Vendor Collaboration: Collaborate with external subcontractors, injection molding suppliers, tooling vendors, and design agencies (including overseas suppliers in China and globally) to ensure design feasibility and quality.
DFM & Production Readiness: Oversee Design for Manufacturability (DFM) reviews, tool design approvals, sample inspections, and root-cause analysis for plastic injection parts, metal forming, castings, and extrusions.
Design Control & Documentation: Author and maintain technical documentation, including System/Mechanical Requirements Specifications (DRS), Verification Protocols (VPR, VRS), Engineering Change Requests/Orders (ECR/ECO), assembly drawings, and Bill of Materials (BOM).
Compliance & Standards: Ensure mechanical design compliance with medical device standards, cleaning & disinfection guidelines (ISO 17664), system labeling, and environmental/regulatory requirements.
Testing & Assembly Line Support: Design test fixtures, write verification plans, execute mechanical testing, and provide real-time engineering support to assembly floors and production lines.

As an R&D Mechanical Engineer at Augury, you will own the design of new parts and assemblies, design parts for machining and injection molding, perform analytical calculations and V&V tests.

Youll work closely with mechanical, hardware, V&V, sustain, manufacturing, and external sub contractors, to deliver innovative, reliable, and scalable IoT devices.

A Day In Your Life
Design mechanical parts and mechanisms, for highly challenging environments, from initial concepts, through all design phases, until transfer to production.
Master 3D CAD models and drawings for mechanical components, assemblies, jigs, and fixtures (including release management and GD&T).
Design for plastics: mostly parts for injection molding, compression and other classical manufacturing methods.
Run prototype validation: mechanical inspection, stress testing, sealing, field testing and support high level system validation procedures.
Cooperate with multidisciplinary teams (HW, V&V, FW, Algo), utilizing analytical thinking and strong theoretical background.
Transfer parts for production, in collaboration with the engineering team, and following product lifecycle methodologies.
Work with subcontractors and vendors in Israel and internationally.

This position refers to leading the design of parts and assemblies for the company imaging systems (PET, SPECT). The position includes working inside an NPI project or supporting the systems in the field (Install Base). The mechanical design of parts and assemblies includes working with multi-disciplinary teams including electronics, system engineering, service engineering and involves transfer of designs to production, support of high-level-assembly lines, etc. This position involves the writing of safety files, planning and execution of V&V tests, engineering calculations and FEA simulations, writing specifications and failure analysis.
Job Description
Essential responsibilities:
Mechanical design derived from specifications (as well as writing specifications), as part of a multi-disciplinary team of parts and assemblies while using off-the-shelf components, using 3D CREO CAD design package. Presenting the design in technical design reviews at the levels of concept and detail design is a part of this position,
Developing creative design solutions in response to the product requirements of functionality, reliability, cost, manufacturability, etc.,
Support of company products at hospital and customer sites via the Service Teams as needed,
Building safety files for products, including strength calculations, failure modes analysis (FMEA), compliance with safety and medical industrial standards as well as internal company standards,
Supporting transfer to production, defining basic assembly and service instructions, working with parts suppliers,
Defining verification and validation test procedure, tests execution and report writing.
Essential qualifications /requirements:
Mandatory: 1st degree in mechanical engineering
Mandatory: Good personal, teamwork and communication skills, enthusiasm from study, self-motivated, results oriented,
Work experience of 2 years in mechanical design, with experience in at least 2 of the following: design of motion systems, large welded or cast structures and frames, mechanisms, electronic packaging, large sculptured FRP covers, electrical design support (DXF, cables routing),
Experience in machining and sheet metal technologies,
Experience in prototype building (hands on), testing execution per test plan and failures troubleshooting
Fluent English at presentation level in technical design reviews, Zoom/Teams calls and in writing.
Desired Characteristics by priority:
Leading tasks from requirements to engineering change finalization,
System level understanding in multi-disciplinary project environment,
Definition of testing and report writing,
Experience in design for cost, reliability, serviceability and for manufacturability.
Ability to perform finite-element analysis and Excel level technical calculations,
we are a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world.

Electronics Engineer – Product Development Management & Sustaining Engineering Team
For our Yokneam site, we are looking for an Electronics Engineer to join the Product Development Management and Sustaining Engineering Team.
The team is responsible for the technical management of electronic product development, ongoing collaboration with System Engineering, integration and support of boards and systems, system adaptations, and electronic design activities throughout various stages of the product lifecycle.
Responsibilities: Ongoing support for company products, including: Technical leadership and matrix collaboration with multiple interfaces, including System Engineering, Mechanical Engineering, Software, and Design Processes, with full responsibility for engineering design and implementation of engineering changes. Design, schematic creation, and schematic updates at the electronic design level (Board Design), including implementation of new functionalities in a Mentor Expedition environment. Leading and supporting PCB layout activities for a wide variety of boards across different business units and adapting them to various projects and systems. Hardware integration at both product and system levels. Responsibility for identification, selection, and implementation of replacement components, including management of the Obsolescence (OBS) process while maintaining functional and performance compatibility with existing systems. Leading Engineering Change Orders (ECOs) and maintaining documentation within engineering management systems.
Requirements: B.Sc. in Electronics Engineering from a recognized institution, or Practical Electronics Engineer with proven development experience. Experience working with hardware/electronic systems and a strong understanding of electronic principles, including analog and digital circuits. Experience in understanding electronic circuits and reading schematics. Hands-on experience in Board Design and PCB development/layout – a significant advantage. Proven experience working in a hardware laboratory with advanced electronic test equipment (Oscilloscope, Power Supply, Signal Generator). High level of technical English, including the ability to read and understand datasheets. Familiarity with military systems – an advantage.
* This position is open to all qualified candidates. ** Only suitable applicants will be contacted.
#Yokneam Illit

As a Sr. Opto-Mechanical Engineer in the CPO group, you will be central to these initiatives, working alongside a team committed to high standards and joint effort. This position uniquely enables you to impact the development of powerful opto-mechanical systems that empower our technology, crafting meaningful change in the world.

What you'll be doing:

Developing opto-mechanical components and systems with precision and innovation.

Conducting assembly and testing, including fabricating the essential jigs and fixtures for smooth execution.

Collaborating closely with cross-functional teams to ensure outstanding product development.

Leading high-reaching projects from concept through successful implementation, ensuring they meet our high standards.

Lead development and collaborate with global vendors to ensure on time delivery of products.

We are looking for a Mechanical Design Engineer to join our mechanical engineering department as a key player in the development of next-generation high-performance interconnects optical solutions for data center servers and storage systems. This key position includes leading the product design throughout all lifecycle stages from inception to Mass production, close interaction with HW, PMC (Product management & configuration), NPI, Thermal, Layout, Quality, and Supply chain teams.


What youll be doing:

Drive all the mechanical design aspects of optical transceivers, including PCB design, opto-mechanical chain and mechanical envelope.

Independently lead product design from concept, through detailed design, and support it during Qualification, NPI and MP stages.

Collaborate in research of ground-breaking technologies, materials, and processes with other groups to bring in creative ideas that solve ever-growing needs.

We are looking for a program manager with technical skills for HW R&D organization, responsible for programs and project on various Network products. The PM will drive execution and scheduling of HW projects while aligning with corporate priorities and constraints.

What you'll be doing:

Responsibility to coordinate between all project stakeholders such as marketing, engineering teams, operations etc. from initial requirements definition through delivery.

Work with project managers and engineers to ensure consistency with company strategy, commitments, and goals.

Responsibility for developing and implementing HW methodologies and Project management processes and tools.