משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 5 שעות
חברה חסויה
Location: More than one
Job Type: Full Time and Hybrid work
As a HW engineer you will develop, sustain, and improve our products. Each project goes through methodical process, starting with requirements, kick-off, SDR, PDR, CDR and eventually bring-up, debug and thorough tests to approve every feature/capability according to the requirements.
Part of your duty is to back your design with proper documentation that concludes your work and allows the project to be sustainable, understandable, and accessible to other.
Requirements:
At least 5 years board design experience
Knowledge in Altium designer - advantage
Knowledge in communication protocols (SPI, I2C, Ethernet, USB)
Background in power design (DC-DC, LDO, Power Tree)
Experience in writing technical documents (Block diagrams, ATP, Bring-Up)
Understanding PCB Production process (DRC, VIA types, Ground methodology) - advantage
Working alongside layout designer
Knowledge in High-speed PCB design.
This position is open to all candidates.
 
Hide
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8839380
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
דרושים בדיאלוג
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
משרת Hardware Engineer לחברה העוסקת בתכנון ופיתוח פתרונות תנועה (Motion) מלאים מקה לקצה.
במסגרת התפקיד אחריות על פיתוח, תחזוקה ושיפור של מוצרי החברה.
כל פרויקט מתנהל בהתאם לתהליך עבודה מתודולוגי, החל מהגדרת הדרישות ו-Kick-off, דרך שלבי SDR, PDR ו-CDR, ועד ל-Bring-up, Debug ובדיקות מקיפות, שמטרתן לאשר שכל התכונות והיכולות של המוצר עומדות בדרישות שהוגדרו.
דרישות:
לפחות 5 שנות ניסיון בתכנון כרטיסים אלקטרוניים (Board Design).
היכרות עם Altium Designer - יתרון.
ידע בפרוטוקולי תקשורת כגון SPI, I2C, Ethernet, USB.
רקע בתכנון מערכות הספק (DC-DC, LDO, Power Tree).
ניסיון בכתיבת מסמכים טכניים כגון Block Diagrams, ATP ו-Bring-Up.
הבנה של תהליכי ייצור PCB, כולל DRC, סוגי VIA ומתודולוגיות הארקה (Ground) - יתרון.
ניסיון בעבודה בשיתוף פעולה עם מתכנן/ת Layout.
ידע בתכנון כרטיסי PCB במהירויות גבוהות (High-Speed PCB Design). המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8812785
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
דרושים בSpecial Job – חברת השמה בהייטק
Job Type: More than one
- Electronics Board & System Design: Own schematic design and component selection for all proprietary boards.
Design system-level wiring architecture and detailed technical drawings.
- Embedded Firmware Development: Write and architect low-level C/C++ firmware infrastructure
to control and interface sensors, multi-axis motors, high-precision components and lasers subsystems with the software.
- Hands-on Board Bring-Up, QC & Troubleshooting: Act as the primary lab problem solver for board debugging,
rework, and failure analysis. Establish QC procedures for newly received boards to support production.
- DFM & Cost Optimization: Apply strict Design for Manufacturability (DFM) principles to optimize PCB layouts,
streamline assembly, and aggressively reduce production and bill-of-materials (BOM) costs.
- PCB Layout Management: Drive physical board layout design,
Requirements:
- Education: B.Sc. in Electrical Engineering with at least 5 years of experience
- Hardware & Layout Expertise: 3+ years of experience in board design (mixed-signal, power management, microcontrollers)
and PCB layout tools (e.g., Altium, OrCAD, KiCad).
- Embedded Firmware Skills: Strong C/C++ programming skills for microcontrollers (STM32, ARM Cortex, etc.)
and deep familiarity with hardware protocols (SPI, I2C, UART, CAN, USB).
- Hands-on Capability: Excellent lab skills (soldering, prototyping, oscilloscope diagnostics)
and a natural problem-solving mindset.
- Proven DFM Focus: Demonstrated experience implementing DFM practices specifically targeted at price reduction,
cost optimization, and yield improvement in production.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8836880
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
1 ימים
דרושים באלביט מערכות
Location: Haifa
Job Type: Full Time
We are looking for
Elbit Systems is looking for a Board Design Engineer for our Haifa site within the Aerospace Division. Join a leading global technology company developing advanced mission-critical systems and cutting-edge solutions across a wide range of defense applications. As part of our multidisciplinary engineering teams, you will take part in the development of advanced hardware platforms while working with cutting-edge technologies and complex engineering challenges
Requirements:
Bachelor's degree in electrical engineering
At least 3 years of experience in digital electronic board design
Experience with requirements capture and top-level architecture
Understanding of PCB layout methodologies and high-speed PCB design concepts
Experience working with signal integrity simulation tools such as Hyperlynx, Ansys, or similar tools
Experience with PCB design tools such as Altium Designer, Mentor Expedition, or Cadence
Experience in Voltage Regulated Modules DC/DC (VRM) design - Advantage
Background in retimers and redrivers - Advantage
Experience in Analog Circuit Design (amplifiers, filters, etc.) - Advantage
Problem-solving skills, teamwork abilities, and effective communication skills

*Only relevant applications will be answered
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8773161
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
2 ימים
Location: Ra'anana and Yokne`am
Job Type: Full Time
Our Hardware team in Israel is looking for a highly experienced System and Board Design Technical Leader to join our Hardware Switch Group. The team leads the development of networking infrastructure for our next-generation data centers, focusing on accelerated performance and optimized end-to-end GPU connectivity. In this role, you will combine deep hands-on board-design expertise with broad technical leadership across multiple switch programs. You will lead products from architecture and concept definition through detailed design, validation, qualification, and mass production, while driving technical alignment, design reuse, and risk management across the project portfolio. Our Networking division is a leading supplier of innovative end-to-end InfiniBand and Ethernet connectivity solutions for servers, storage, and accelerated data centers. Our products deliver industry-leading performance, bandwidth, and scalability across AI, machine learning, cloud computing, and high-performance computing applications.

What youll be doing:

Lead complex switch system and board designs from concept through qualification, production ramp, and mass production, serving as the technical focal point and key decision-maker.

Maintain a broad technical view across multiple projects, identifying common risks, cross-project dependencies, opportunities for reuse, and long-term architectural needs.

Define product, system, and board-level requirements, architectures, interfaces, and technical tradeoffs.

Own and guide the detailed electrical design, including schematics, component selection, power architecture, connectivity, and CPLD/FPGA implementation.

Lead multidisciplinary collaboration across board design, mechanics, thermal, signal and power integrity, PCB layout, software, firmware, RTL, validation, manufacturing, and quality.

Guide and review complex multilayer PCB layouts, ensuring signal integrity, power integrity, reliability, manufacturability, cost, and performance requirements are met.

Perform hands-on board bring-up, integration, validation, and debugging using advanced laboratory equipment, and lead complex root-cause investigations.

Drive qualification, NPI, production-line stabilization, and mass-production support, ensuring technical issues are resolved and lessons learned are applied across projects.
דרישות:
What we need to see:

B.Sc. in Electrical Engineering or equivalent relevant experience.

10+ years of experience in complex board design and hardware-system development, preferably across the complete product lifecycle.

Proven ability to maintain a system-level and portfolio-level perspective while successfully driving the execution of detailed hardware designs.

Demonstrated experience leading multidisciplinary projects, technical reviews, architecture decisions, and complex problem-solving activities.

Deep knowledge of electrical schematics, component selection, advanced multilayer PCB design, and layout implementation.

Strong experience with high-current power-delivery design and a comprehensive understanding of CPLD/FPGA and RTL implementations.

Strong hands-on laboratory skills, including board bring-up, system integration, validation, debugging, and root-cause analysis.

Independent and proactive leadership, with strong project-management, communication, mentoring, and interpersonal skills.

Ways to stand out from the crowd

Experience developing data-center switches or other high-performance networking systems and taking complex hardware products from concept through high-volume manufacturing.

Proven high-speed design experience with interfaces operating at 25 Gb/s and above.

Experience defining reusable architectures and driving technical alignment across multiple products.

Strong knowledge of embedded systems, advanced PCB technologies, signal integrity, and power integrity.

Experience working with ODMs, contract manufacturers, silicon vendors, and compone המשרה מיועדת לנשים ולגברים כאחד.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8837128
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
31/08/2026
חברה חסויה
Location: Netanya
Job Type: Full Time
Join our Communication Systems as a Hardware Board Design Engineer, where you will contribute to complex design projects and the development of cutting-edge communication systems. In this role, you will design high-performance boards for advanced avionics systems, working as part of a professional hardware design team. Your expertise will drive innovation and ensure the highest standards of quality in our products.

Responsibilities:
End to end boards design.
Starting from the component's selection and evaluation, schematic design, thermal considerations, mechanical constraints.
Layout design, production supervision, bring-up on lab.
Including all the relevant document writing and conducting the design reviews needed until the product is finished.
Leading products from the definition until their release.
Supporting production when needed.
Requirements:
Education:

BSc/MSc in Electrical/Electronics-Engineering from a known institute.
Experience and skills:
Electronics Engineer. 3+ years of board design. Proven experience in complex work with multilayer boards.
Knowledge and experience with digital circuits and interfaces, Memories interfaces, Microprocessors, DSP.
Knowledge and experience with analog circuits, DC/DC, ADC, amplifiers.
High knowledge of Layout design considerations, power planes, critical circuits, noise filtering, and crosstalk avoidance techniques.
Experience in circuit trouble shooting and bring-up working together with SW teams.
Modeling and simulation experience.
Understanding of EMI / EMC concepts.
Ability to understand product requirements and industry standards demands.
Ability to write specification documents, technical reports, design verification documents.
Good knowledge of Schematic design tools (Orcad preferred, not exclusive), very good handling of Office environment; Wide knowledge of lab equipment.

Personal Requirements:
Excellent teamwork skills and ability to interface with various levels of technicians, engineers, suppliers and manufacturing.
Ability to work under pressure with high sense of responsibility and strong commitment to due dates.
Highly organized, able to work independently with limited supervision, including working with and supervising external subcontractors (mechanical, layout designers).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8804089
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Caesarea
Job Type: Full Time
Spearhead innovative silicon architecture for AI infrastructure, guiding board design from concept through to mass production.

Act as the technical decision-maker for the project and collaborate with cross-functional teams in mechanics, thermal, PCB layout, and software/RTL.

Define product specifications, develop electrical schematics, and guide component selection.

Conduct hands-on testing in a lab environment and drive the PCB bring-up, characterization, and debugging stages.
Requirements:
B.Sc. in Electrical Engineering or equivalent practical experience.

3+ years of experience as a hardware/board design engineer, with a strong background in executing complex hardware projects.

Experience in high-speed and multi-layer PCB design.

Hardware-oriented, with experience in measurements, characterization, and using lab equipment and hands-on experience in PCB bring-up and systematic debugging.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8837050
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
3 ימים
חברה חסויה
Location: Yokne`am
Job Type: Full Time
Our HW Sustain team in Israel is looking for an board designer to join the sustaining engineering team . The team leads the HW sustaining of networking infrastructure for NVIDIA next-generation data centers focusing on accelerated performance while enabling optimized end to end GPU connectivity.

Our Networking division is a leading supplier of innovative end-to-end InfiniBand and Ethernet connectivity solutions and services for servers and storage. We offer market-leading solutions that include adapter cards, switches, cables and software to support networking technologies. Our products optimize data center performance and deliver industry-leading bandwidth and scalability. In addition, we serve a wide range of markets including high performance computing, enterprise, data centers, cloud computing, big data and Web 2.0. We are constantly reinventing ourselves to stay ahead of the market and bring groundbreaking products and services to the industry. Our products are focused on delivering the most optimized power - performance communication solutions for industries like AI, ML, Cloud, Media and Entertainment as well as any other industry that can benefit from our Datastream acceleration.

What you'll be doing:

You will take engineering ownership of networking products once they are released to production

Provide engineering technical leadership for improving product availability, driving cost reduction, and resolving manufacturability issues

Work on debugging and resolving HW related quality issues to improve customers' satisfaction
Requirements:
What we need to see:

B.Sc. in Electrical Engineering (or equivalent experience).

2+ years as a board designer, experience in complex HW projects execution.

Hands-on lab skills.

Background in leading Multi layer PCB design.

Experience in high current power delivery design.

Personal: Project management skills, independent, excellent interpersonal relationship.


Ways to stand out from the crowd:

Experience in data-center switches products design for high volume manufacturing.

Proven knowledge in high speed design .

Experience in embedded systems design.

Knowledge in advanced PCB technology.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8836179
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Caesarea
Job Type: Full Time
You will own the complete EVB hardware bring-up process from initial power‑on through release to internal engineering teams. This role is highly practical and technical, responsible for identifying and resolving complex board- and ASIC-level hardware issues, documenting findings, and driving corrective actions.

Key responsibilities
Own and execute complete EVB hardware bring-up, validation, and qualification activities in the lab.
Perform initial board power‑up, verify power rails and sequencing, validate clocks and resets, and exercise interfaces.
Lead hands‑on debugging and root‑cause analysis of board‑level and ASIC-related hardware failures.
Read and use complex hardware schematics and PCB layout data as primary debugging tools; review PCB manufacturing data when investigating failures.
Perform detailed lab measurements (oscilloscopes, VNAs, logic analyzers, power supplies, electronic loads) and correlate results with schematics, layout, ASIC requirements, and simulations.
Collaborate with SI and PI teams to investigate signal-quality, channel-loss, reflections, power-delivery, and noise issues.
Work with FPGA and BSP/SW engineers during initial system bring-up and debugging.
Document bring-up procedures, debug findings, measurements, known issues, workarounds, and solutions.
Support manufacturing and assembly debug (PCB, SMT, soldering, component and assembly-related failures).
Drive hardware issues through identification, root‑cause analysis, corrective action, implementation, and final validation.
Requirements:
Bachelors degree in Electrical Engineering or a closely related field.
Minimum 4 years of hands‑on hardware engineering experience focused on board bring‑up and debugging of ASIC/FPGA platforms.
At least 3 years actively performing measurements and analysis. Demonstrated experience using lab equipment (oscilloscope, multimeter, logic analyzer, VNA, power supplies)
Proven ability to read and interpret complex multi‑sheet hardware schematics and correlate schematic signals to PCB layout.
Experience with high‑speed PCB design principles and signal integrity / power integrity troubleshooting on boards with >6 layers or multi‑gigabit interfaces.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8836949
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Haifa
Job Type: Full Time
We are looking for a talented Hardware Board Designer to join our multidisciplinary R&D team. This is an exciting opportunity to take part in the design and development of advanced electronic systems, working alongside hardware, firmware, software, and system engineers from concept through integration.
We are looking for a creative, hands-on engineer with a passion for hardware design and a desire to work on cutting-edge technologies.
Responsibilities:
Design and develop complex electronic boards from concept to production.
Perform hands-on schematic design and component selection.
Support and guide PCB layout activities.
Prepare and present design reviews.
Collaborate closely with firmware, software, RF, and system engineering teams to ensure successful system integration.
Develop advanced multidisciplinary systems incorporating:
CPUs / SoCs
FPGA-based designs
Analog and mixed-signal circuits
High-speed interfaces (DDR, PCIe, Ethernet, LVDS, etc.)
RF transmit and receive chains
Filters and amplifier circuits
Power supply and power management circuits
Support board bring-up, debugging, validation, and troubleshooting.
Requirements:
B.Sc. in Electrical Engineering or a related field.
5+ years with proven experience in board-level hardware design.
Experience with schematic design and PCB development.
Experience designing digital and analog circuits, including high-speed interfaces (DDR, PCIe, Ethernet, LVDS, etc.).
Experience working with processors and FPGA-based systems.
Familiarity with RF circuits and power supply design - an advantage.
Strong analytical skills, a hands-on approach, and the ability to work in a multidisciplinary environment.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8792012
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
31/08/2026
חברה חסויה
Location: Netanya
Job Type: Full Time
We are looking for a Solutions Engineer to join our growing Earth Observation, Tracking, Telemetry & Command (TT&C), New Space and Integrated Solutions business line, working closely with our Sales and Engineering teams.

In this role, you will act as a technical subject matter expert (SME), leading customer engagements, defining system architecture, preparing proposals, and delivering technical presentations.

You will leverage your skills and expertise to tailor solutions that meet mission-critical customer requirements in the ground systems and integrated solutions sectors.

This is a key technical-commercial position, directly influencing the company's ability to win new business and expand into emerging markets.

Responsibilities:
Act as a technical authority for multidisciplinary systems involving mechanics, electronics, software, and RF communication.
Lead technical engagements with prospects and customers: requirements gathering, solution design, system architecture, block diagram development, and technical risk assessment.
Prepare and deliver high-quality proposals:
Analyze customer specifications, SOWs, and RFPs.
Develop competitive solution concepts, costing, and technical documentation.
Perform technical risk analysis and competition analysis.
Work with the Sales team by conducting technical presentations and demonstrations that articulate the features and advantages of company solutions.
Collaborate with subcontractors, third-party partners, and internal stakeholders (engineering, finance, operations, executive team) to develop winning solutions.
Maintain deep knowledge of the companys product portfolio, new technologies, and evolving industry trends.
Support continuous improvement of proposal generation processes, tools, templates, and best practices.
Perform Link Budget Analysis and basic RF performance assessments as part of solution definition.
Mentor and support internal sales associates to enhance their technical understanding and customer engagement capabilities.
Participate in product strategy discussions by providing technical market feedback to influence future developments.
Requirements:
Mandatory Qualifications and Skills:
Bachelors Degree in Electronics Engineering, Mechanical Engineering, Aerospace Engineering, or another relevant technical field.
At least 3 years of experience working in a Pre-Sales / Solutions Engineering role supporting business development.
Proven experience supporting technical solution design, proposal development, or technical sales for ground station systems, TT&C, or aerospace communication systems.
Background in RF system fundamentals, antenna systems, mechanical structures, and electronics.
Experience preparing system architectures, block diagrams, and technical solution documents.
Excellent interpersonal, presentation, and high technical writing skills in English and Hebrew.
Strategic thinker with ability to analyze requirements and develop discriminating solutions.
Willingness and ability to travel internationally for customer meetings, demonstrations, and events.

Desirable Qualifications:
Demonstrated experience in preparing and leading large-scale proposals for aerospace, defense, or satellite ground systems.
Minimum of three years as a Systems Engineer or Integration Engineer working with complex, multidisciplinary systems that encompass RF, electronics, mechanical, and software components.
Prior hands-on involvement in system testing, such as FAT, SAT, or ATP.
Knowledgeable about ground station link budgets, various tracking modes (step track, monopulse, etc.), as well as satellite communication and tracking technologies.
Experience with Earth Observation, Remote Sensing, or New Space initiatives.
Passionate about space exploration.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8804106
סגור
שירות זה פתוח ללקוחות VIP בלבד