דרושים » הנדסה » R&D Lab Technician / integrator

We are looking for an experienced Electronics Engineer / Practical Electronics Engineer to join our multidisciplinary R&D team and support the development of advanced electro-optical systems.
In this role, you will be responsible for electronic board bring-up, debugging, repair, testing, calibration, and system integration. You will work closely with electrical, mechanical, and system engineers throughout the product lifecycle, from early prototypes to production and deployment.
This position is ideal for someone who enjoys practical engineering work, solving complex hardware issues, and working on mission-critical technologies in a dynamic development environment.
Responsibilities
Perform bring-up, debugging, validation, and repair of electronic boards for advanced electro-optical systems.
Troubleshoot analog, digital, power, and communication interfaces using oscilloscopes and other laboratory equipment.
Perform board-level modifications, rework, repairs, and validation according to engineering requirements.
Work closely with hardware design engineers to investigate failures, improve designs, and resolve technical issues.
Support PCB manufacturers and assembly partners throughout production, troubleshooting, and quality processes.
Execute and support environmental testing of electronic boards and electro-optical systems.
Collaborate with mechanical engineers on system integration, thermal considerations, cable routing, and assembly optimization.
Develop, document, and perform calibration procedures for electro-optical systems.
Document test results, failure analysis, corrective actions, and engineering activities.
Support continuous improvement of laboratory processes, production readiness, and engineering workflows.

We are looking for an Electro-Optical Engineer to join our LYNX development team and take part in developing advanced electro-optical capabilities for next-generation systems.
This role combines practical engineering work, system-level thinking, experimentation, and innovation. Youll lead hands-on activities involving sensors, cameras, lenses, thermal technologies, and optical subsystems, while working closely with multidisciplinary teams to integrate these technologies into complex operational platforms.
Youll have the opportunity to influence both component-level and system-level development, from early concept stages through testing, integration, validation, and deployment.
What Youll Do
Evaluate, characterize, and integrate electro-optical components including cameras, sensors, lenses, thermal imaging modules, compasses, and related subsystems.
Design, plan, and execute optical experiments, measurements, and system integration activities.
Develop and implement test methodologies for image quality, sensor accuracy, optical performance, environmental behavior, and overall system functionality.
Support integration of new technologies into existing and future LYNX systems.
Work closely with suppliers and external partners on technical evaluations, design reviews, performance analysis, and problem-solving.
Prepare technical documentation including specifications, test plans, reports, and engineering summaries.
Support troubleshooting, verification, validation, and field-testing activities.
Collaborate with multidisciplinary teams across mechanics, electronics, software, systems engineering, QA, and operations.

About the Role We are seeking an experienced system Engineer with a strong background in electro-optics to join our innovative and multidisciplinary team. This role involves leading system -level design and integration of advanced electro-optical systems that combine optics, mechanics, electronics, and algorithms Responsibilities
* Contribute to the design and architecture of advanced electro-optical systems.
* Collaborate closely with a multidisciplinary team, including software, firmware, hardware, mechanical, and algorithm engineers, as well as product managers.
* Conduct hands-on evaluation and testing of optical components and prototypes using optical and software tools.
* Lead system integration activities and troubleshooting throughout development and production stages.
* Oversee deployment of complex, multi-disciplinary systems into mass production.
* Prepare and maintain system -level documentation, including architecture definitions, specifications, TEST plans, and performance reports.

BIRD Aerosystems is a global leader in the development of advanced airborne defense, intelligence, and surveillance solutions for military, governmental, and commercial aviation. Our innovative technologies are deployed worldwide, supporting mission-critical operations and protecting aircraft through advanced multidisciplinary systems. As we continue to grow, we are looking for a talented Hardware Design Engineer (Board Design) to join our Hardware Development team and contribute to the design and development of advanced electronic boards for complex aerospace and defense systems. What You’ll Do · Design, develop, and modify electronic boards throughout the entire product lifecycle. · Perform board bring-up activities following development and initial manufacturing. · Troubleshoot hardware issues, analyze failures, and implement design improvements. · Edit schematics and support PCB layout activities. · Improve product manufacturability and maintain production documentation. · Support PCB manufacturers and electronic assembly subcontractors while ensuring compliance with IPC standards. · Investigate manufacturing failures and provide engineering solutions. · Work closely with multidisciplinary teams including Mechanical, Software, Firmware, and System Engineering. · Participate in design reviews (PDR/CDR). · Prepare engineering documentation, test procedures, and product verification documents. Support the transition from development to production.

HW Application Engineer - Job description: we are a leading supplier of microcontrollers and security hardware solutions for tier-1 customers in the computing and servers business. It is a self-contained design center, spanning from product management, system and chip architecture, through design, software development, system engineering and production. The group works closely with major customers, primarily key OEMs in the computing space, to develop semi-custom, innovative solutions for a wide range of application platforms. We are looking for a Hardware Application Engineer, to maintain and support our strong collaboration with our customers.
What You Will Be Doing
* Lead customers through all stages of designing their systems based on Nuvoton manageability and security microcontrollers (i.e., BMC, EC, SIO and TPM) from planning till production.
* Respond and resolve customer hardware related issues and requests, reported by the regional support team (FAEs) or directly by customers.
* Work closely with R&D, architects and PMs to provide issue resolutions, workarounds, and implement product features or support tools.
* Key contributor in complex debug tasks for issues found by customers; build debug strategies and hands-on work with the design team through the debug.
* Develop deep knowledge of customer applications and systems, recommend application solutions, design ideas and products to customer design teams.
* Develop and maintain technical documentation (e.g., reference schematics, application notes, design guidelines).
* Provide inputs and participate in next generation ICs definition based on customer inputs.
* Contribute to the definition of innovative and differentiated products.

We are looking for a Qualification & Compliance Engineer to own the qualification and regulatory-certification path of our networking hardware platforms - from design-for-compliance through pre-compliance testing, accredited-lab campaigns, and global market certification. You will combine solid theory in EMC, product safety and environmental engineering with strong hands-on lab capability, partnering with electrical, SI/PI, thermal-mechanical, firmware and product teams to bring products to market on time, on-spec, and certified across all target regions.

We are looking for a senior Quality Engineer to serve as our main technical expert for hardware quality and environmental compliance from New Product Introduction (NPI) to mass production. In this high-level role, you will be responsible for building our very first quality plan, setting up our quality system from scratch, and writing all standard procedures.
You will lead the company through its initial certifications for both ISO 9001 and ISO 14001 and take full responsibility for keeping them updated. You will also look ahead to prepare our systems for ISO 45001 (Occupational Health and Safety) as we grow. someone with an open-minded and creative approach to finding ways to use AI tools to automate manual quality tasks. Working closely with both software and high density networking hardware teams, you will make sure our products, local and international factories, and global vendors meet top industry standards for reliability and sustainability. This role requires managing quality systems for production lines located both locally and abroad, with a willingness to travel and visit our global lines as needed.

We are looking for a Solutions Engineer to join our growing Earth Observation, Tracking, Telemetry & Command (TT&C), New Space and Integrated Solutions business line, working closely with our Sales and Engineering teams.

In this role, you will act as a technical subject matter expert (SME), leading customer engagements, defining system architecture, preparing proposals, and delivering technical presentations.

You will leverage your skills and expertise to tailor solutions that meet mission-critical customer requirements in the ground systems and integrated solutions sectors.

This is a key technical-commercial position, directly influencing the company's ability to win new business and expand into emerging markets.

Responsibilities
Act as a technical authority for multidisciplinary systems involving mechanics, electronics, software, and RF communication.
Lead technical engagements with prospects and customers: requirements gathering, solution design, system architecture, block diagram development, and technical risk assessment.
Prepare and deliver high-quality proposals:
Analyze customer specifications, SOWs, and RFPs.
Develop competitive solution concepts, costing, and technical documentation.
Perform technical risk analysis and competition analysis.
Work with the Sales team by conducting technical presentations and demonstrations that articulate the features and advantages of company solutions.
Collaborate with subcontractors, third-party partners, and internal stakeholders (engineering, finance, operations, executive team) to develop winning solutions.
Maintain deep knowledge of the companys product portfolio, new technologies, and evolving industry trends.
Support continuous improvement of proposal generation processes, tools, templates, and best practices.
Perform Link Budget Analysis and basic RF performance assessments as part of solution definition.
Mentor and support internal sales associates to enhance their technical understanding and customer engagement capabilities.
Participate in product strategy discussions by providing technical market feedback to influence future developments.

We support farmers by providing real-time actionable information to help them manage their herds. It provides pet owners with smart devices and data that give them a better understanding of their pet's activity and health needs, enriching relationships. It helps conservationists safeguard natural environments and wildlife.

Leveraging decades of Technological Research & Development experience across many markets, technologies, and species, along with development environments and Quality Assurance procedures, we're always inventing new ways to look after the health and well-being of animals. Our decades of experience keep us ahead of the curve by leveraging advanced Technological Solutions from enhancing the precious bond between people and their pets, to advancing animal healthcare and wildlife preservation.

Position Summary
The Technologist is responsible for supporting the transition of products from development to manufacturing and sustaining production throughout the product lifecycle. The role focuses on PCB/PCBA technologies, manufacturing processes, supplier management, DFM/DFT reviews, failure analysis, engineering change implementation, and continuous process improvement.

The company is based in Netanya.

Responsibilities:

Serve as the technical focal point for PCB and PCBA manufacturing technologies.
Work closely with the R&D and Lead DFM, DFA, reviews for new and existing products.
Support NPI activities and production transfer to manufacturing sites.
Review PCB stack-ups, materials, fabrication drawings, Gerber data, and manufacturing documentation.
Work closely with PCB and PCBA suppliers to resolve manufacturing issues and optimize yield.
Support engineering changes (ECO/ECR) and product lifecycle activities.
Lead root cause investigations and corrective actions for production and field failures.
Review and approve manufacturing documentation including INFO files, EQ files, specifications, and work instructions.
Drive continuous improvement initiatives focused on quality, cost, and manufacturability.
Support incoming quality requirements and supplier qualification activities.
Collaborate with R&D, Quality, Operations, , and Manufacturing teams worldwide.
Provide technical guidance regarding PCB technologies, materials, surface finishes, vias, stack-ups, and assembly processes.
Published effectively report results to peers and management
Manage the Spec and requirements of the Battery and NFC