דרושים » חשמל ואלקטרוניקה » Integration Engineer- North

We are looking for an experienced Electronics Engineer / Practical Electronics Engineer to join our multidisciplinary R&D team and support the development of advanced electro-optical systems.
In this role, you will be responsible for electronic board bring-up, debugging, repair, testing, calibration, and system integration. You will work closely with electrical, mechanical, and system engineers throughout the product lifecycle, from early prototypes to production and deployment.
This position is ideal for someone who enjoys practical engineering work, solving complex hardware issues, and working on mission-critical technologies in a dynamic development environment.
Responsibilities:
Perform bring-up, debugging, validation, and repair of electronic boards for advanced electro-optical systems.
Troubleshoot analog, digital, power, and communication interfaces using oscilloscopes and other laboratory equipment.
Perform board-level modifications, rework, repairs, and validation according to engineering requirements.
Work closely with hardware design engineers to investigate failures, improve designs, and resolve technical issues.
Support PCB manufacturers and assembly partners throughout production, troubleshooting, and quality processes.
Execute and support environmental testing of electronic boards and electro-optical systems.
Collaborate with mechanical engineers on system integration, thermal considerations, cable routing, and assembly optimization.
Develop, document, and perform calibration procedures for electro-optical systems.
Document test results, failure analysis, corrective actions, and engineering activities.
Support continuous improvement of laboratory processes, production readiness, and engineering workflows.

our company Professional Services is seeking an experienced Systems Integration Engineer - EW & RF to lead integration testing activities for complex Electronic Warfare (EW) systems. This is a full-time position located in central Israel. Key Responsibilities: Lead and take overall responsibility for system integration testing activities throughout the project. Set up and maintain the project integration lab and perform system -level testing. Identify, analyze, and troubleshoot technical issues in collaboration with multidisciplinary engineering teams. Write technical specifications, conduct training sessions, and provide Technical Support to customers. Perform integration and testing activities at customer sites in Israel and abroad. Collaborate closely with Development, Engineering, and Product Management teams.

we are seeking for an experienced Lead ATE Development Engineer to take ownership of the end-to-end design and implementation of test solutions for airborne systems and electronic assemblies. In this role, you will define the testing strategy, develop advanced test equipment, and integrate test capabilities across development, integration, and manufacturing processes.
Job Description:
Lead the design and development of Automated Test Equipment (ATE) for electronic boards, assemblies, and airborne systems.
Define test architectures, requirements, interfaces, and test coverage methodologies.
Design and integrate hardware, wiring, measurement equipment, simulators, and test software.
Develop engineering specifications, test procedures, operating instructions, and technical documentation.
Perform verification and validation activities, troubleshoot failures, and improve diagnostic capabilities.
Promote Design for Testability (DFT) practices in collaboration with hardware, software, and system engineering teams.
Support the transition of test systems from development to production and assist with qualification and acceptance testing.
Manage technical interactions with suppliers and subcontractors.

we are a leading company specializing in the development and manufacturing of autonomous drone systems. Its solutions combine hardware, software, and AI-driven technologies to support complex, large-scale operations. our company works primarily with defense industries, such as military and law enforcement agencies worldwide. The company is part of Ondas Holdings and operates as a wholly owned subsidiary.
In this role, you will be part of the electronics engineering team responsible for leading projects end-to-end, including electronics design, drafting, design verification testing, collaboration with internal departments, external suppliers, and supporting development and production phases
Responsibilities
Planning, executing, and documenting verification & validation (V&V) tests for electronic circuits, assemblies, and multidisciplinary systems
Performing functional, electrical, environmental, and integration tests for airborne and ground electronic systems
Preparing, executing, and documenting ATP (Acceptance Test Procedure) and validation test documents
Operating laboratory equipment such as oscilloscopes, spectrum analyzers, signal generators, power supplies, multimeters, and data acquisition systems
Performing hands-on debugging and troubleshooting of electronic boards, communication interfaces, cables, and system-level failures
Supporting integration, bring-up, and verification activities throughout development and production stages
Writing detailed test reports, validation summaries, failure analyses, and technical documentation
Working closely with hardware, firmware, system engineering, integration, manufacturing, and production teams
Supporting qualification, acceptance, and reliability testing processes מול customers, subcontractors, and internal teams
Managing laboratory activities, maintaining test setups, and supporting calibration and organization of lab equipment
Solving technical and system-level challenges under tight schedules and multidisciplinary constraints.

We are seeking a highly experienced professional with a strong background in RF, digital, and system-level testing, and with the ability to guide technical decisions, solve complex integration challenges, and support advanced test equipment for production environments.

What will you do:

Design and develop Automated Test Equipment (ATE) for RF, digital, and mixed-signal products at board and system levels.

Lead the technical definition and implementation of test strategies in collaboration with R&D, product engineering, and manufacturing teams.

Own the technical analysis of system schematics, block diagrams, and interface requirements to define robust and reliable ATE solutions.

Support production lines by troubleshooting test failures and optimizing test processes for yield and throughput improvements.

Provide technical guidance for integration with software and firmware control and automation systems.

Evaluate and select test instruments, fixtures, and measurement techniques based on product specifications.

Maintain documentation for test systems, including design files, calibration procedures, and troubleshooting guides.

Mentor engineers and technicians on ATE methodologies, operation, and maintenance.

The Electronics Team is looking for an Electrical & Electronics tech Lead to support the development of next-generation metrology systems for semiconductor manufacturing. In this role, you will become an integral part of our R&D organization, contributing to the design, development, integration, and validation of advanced electrical and electronic systems used in ultra-high precision OCD metrology platforms.
Responsibilities
What will you be doing:
Design and develop analog, digital, mixed-signal, and electrical (AC/DC) subsystems for complex multidisciplinary products.
Design electronic boards and participate in schematic reviews, component selection, integration, validation, and production release activities.
Develop embedded firmware and engineering software tools for control, monitoring, automation, testing, and data acquisition applications.
Lead electrical integration activities from prototype phase through manufacturing transfer and product lifecycle support.
Prepare engineering documentation including specifications, schematics, wiring diagrams, test procedures, and design reports.
Participate in product specification reviews, architecture discussions, and multidisciplinary design reviews.
Collaborate with and lead external suppliers and manufacturers throughout development, qualification, and production activities.
Conduct hands-on laboratory testing, debugging, troubleshooting, root-cause investigations, and data analysis.
Lead technical development projects from initiation through successful delivery including supplier management.

We are looking for a hands-on Electronics Engineer with practical hardware experience to join our development team in Kfar Saba.
This is a hands-on role working on advanced electronic systems - troubleshooting, component selection, and providing professional support to the development teams and to customers.
About us
An established technology company specializing in motion control and intelligent power management systems.
We develop and manufacture advanced motor controllers, power management systems, and smart circuit protection solutions tailored to the unique requirements of the defense and industrial markets.
What will you do?
Perform bring-up and initial operation of electronic boards and circuits
Identify, analyze, and resolve hardware faults and design errors
Select and qualify electronic components for existing products and new developments
Provide professional guidance and work day-to-day with PCB designers
Provide technical support to development teams and embedded software engineers
Work with customers and provide professional answers on hardware topics
Collaborate with the development, production, and integration teams
Take part in product improvement and development processes.

Required Integration Engineer
Job Description:
Join our multidisciplinary integration team and take part in the development and validation of advanced RF-based systems. The role involves hands-on work with complex hardware and software systems, prototype setup and testing, troubleshooting, and close collaboration with multiple R&D teams.
Responsibilities include:
Integration and testing of complex multi-module systems
Involvement throughout the full development lifecycle of RF and digital systems
Setup and validation of prototype systems at both hardware and software levels
Identifying hardware/software issues and driving technical solutions
Working closely with software, hardware, and final testing teams
Participating in challenging, development-oriented projects with strong growth opportunities.

Electronics Engineer – Product Development Management & Sustaining Engineering Team
For our Yokneam site, we are looking for an Electronics Engineer to join the Product Development Management and Sustaining Engineering Team.
The team is responsible for the technical management of electronic product development, ongoing collaboration with System Engineering, integration and support of boards and systems, system adaptations, and electronic design activities throughout various stages of the product lifecycle.
Responsibilities: Ongoing support for company products, including: Technical leadership and matrix collaboration with multiple interfaces, including System Engineering, Mechanical Engineering, Software, and Design Processes, with full responsibility for engineering design and implementation of engineering changes. Design, schematic creation, and schematic updates at the electronic design level (Board Design), including implementation of new functionalities in a Mentor Expedition environment. Leading and supporting PCB layout activities for a wide variety of boards across different business units and adapting them to various projects and systems. Hardware integration at both product and system levels. Responsibility for identification, selection, and implementation of replacement components, including management of the Obsolescence (OBS) process while maintaining functional and performance compatibility with existing systems. Leading Engineering Change Orders (ECOs) and maintaining documentation within engineering management systems.
Requirements: B.Sc. in Electronics Engineering from a recognized institution, or Practical Electronics Engineer with proven development experience. Experience working with hardware/electronic systems and a strong understanding of electronic principles, including analog and digital circuits. Experience in understanding electronic circuits and reading schematics. Hands-on experience in Board Design and PCB development/layout – a significant advantage. Proven experience working in a hardware laboratory with advanced electronic test equipment (Oscilloscope, Power Supply, Signal Generator). High level of technical English, including the ability to read and understand datasheets. Familiarity with military systems – an advantage.
* This position is open to all qualified candidates. ** Only suitable applicants will be contacted.
#Yokneam Illit

As we continue to grow, we are looking for a talented Hardware Design Engineer (Board Design) to join our Hardware Development team and contribute to the design and development of advanced electronic boards for complex aerospace and defense systems.

What Youll Do

Design, develop, and modify electronic boards throughout the entire product lifecycle.

Perform board bring-up activities following development and initial manufacturing.

Troubleshoot hardware issues, analyze failures, and implement design improvements.

Edit schematics and support PCB layout activities.

Improve product manufacturability and maintain production documentation.

Support PCB manufacturers and electronic assembly subcontractors while ensuring compliance with IPC standards.

Investigate manufacturing failures and provide engineering solutions.

Work closely with multidisciplinary teams including Mechanical, Software, Firmware, and System Engineering.

Participate in design reviews (PDR/CDR).

Prepare engineering documentation, test procedures, and product verification documents.

Support the transition from development to production.