משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
חברה חסויה
Location: Netanya
Job Type: Full Time
End to end boards design. Starting from the components selection and evaluation, schematic design, thermal considerations, mechanical constraints, layout design, production supervision, bring-up on lab, including all the relevant document writing and conducting the design reviews needed until the product is finished. Leading products from the definition until their release and supporting production when needed.
Requirements:
BSc/MSc in Electrical/Electronics-Engineering from a known institute.
Experience and skills:

Electronics Engineer. 3+ years of board design. Proven experience in complex work with multilayer boards.
Knowledge and experience with digital circuits and interfaces, Memories interfaces, Microprocessors, DSP
Knowledge and experience with analog circuits, DC/DC, ADC, amplifiers
High knowledge of Layout design considerations, power planes, critical circuits, noise filtering, and crosstalk avoidance techniques.
Experience in circuit trouble shooting and bring-up working together with SW teams.
Modeling and simulation experience.
Understanding of EMI / EMC concepts.
Ability to understand product requirements and industry standards demands.
Ability to write specification documents, technical reports, design verification documents
Good knowledge of Schematic design tools (Orcad preferred, not exclusive), very good handling of Office environment; Wide knowledge of lab equipment.
Experience with Avionics Industry - Advantage
Experience in DSP design - Advantage
Audio Analog Design Experience - Advantage
This position is open to all candidates.
 
Hide
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8688967
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 2 שעות
Job Type: Full Time and Hybrid work
.A leading international company is looking for a Hardware Engineer for engineering department
This position is a key part of the engineering department that is responsible for multidisciplinary products through the Product Life Cycle (PLC).
The position involves extensive communication with local and worldwide R D departments, parties in operation, subcontractors, production floors, and others.
The company is based in Netanya.
Responsibilities:
Lead the HW change on new and legacy products (EOL, Layout update)
Leads DFx and NPI procedures for new products
Leads failure analysis and reliability testing on all critical aspects of product design
Components engineer for new and existing products
Support projects and teams to ensure the design of new and existing products meet quality and reliability and apply validation tests to ensure products meet company standards
Requirements:
B.Sc. in Electronics Engineering is a must
Deep understanding of electronic design and DFM - must
Understanding multidisciplinary products design
At least 5 years of experience with worldwide compliance / regulations - must
Knowledge in electronics components, PCB and PCBA design and assembly process, batteries, radio frequency ( RF ), IR, testing methods, and knowledge in ATE (Automatic TEST Equipment)
At least 5 years of experience in board design with Altium or OrCAD - Advantage
Communication skills verbal, written, and presentation skills in both Hebrew English is must.
Experience in matrixed worldwide organization and ability to work well in a team environment including cross-culture.
Self-motivated and organized.
Ability and willingness for hands-on assignments
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8690631
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 4 שעות
דרושים בQHR
Job Type: Full Time
Lead the system Engineering domain for existing and next-generation products.
Define qualification and verification requirements for all system and product features.
Write and maintain system specifications (e.g., SRS).
Define compliance requirements for company products (environmental, safety, radio, etc.).
Plan, support, and oversee compliance certification tests at accredited laboratories.
Lead system design reviews (PDR, CDR).
Lead and supervise system pilot installations.
Support system deployments in the field.
Experience with high-volume IoT systems - advantage.
Requirements:
B.Sc. in Electrical/Electronic Engineering - required.
Minimum 5 years of experience in system engineering for multidisciplinary systems (hardware/software/algorithms).
Ability to write detailed requirements and manage the process independently and professionally.
Strong system -level
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8690173
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
לפני 3 שעות
דרושים בQHR
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
ליווי הנדסי למוצרים קיימים לאורך חיי המוצר ופיתוח מוצרים חדשים.
תכנון פיתוח וייעול מבדקים ATE)).
הקמת עצי מוצר וניהול מק"טים במערכת ERP.
תמיכה הנדסית שוטפת מול מחלקות החברה (ייצור, איכות, תפ"י, שיווק ומכירות).
עבודה מול קבלני משנה לייצור כרטיסים והרכבות.
אחריות מלאה על תכנון מעגלים (Board Design) עבור מוצרים חדשים וקיימים.
הובלת סקרי תיכון.
פיתוח, אימות ובדיקת חומרה לעמידה בדרישות ובמפרטים.
בדיקות מעבדה ובדיקות שטח של ביצועים חשמליים של כרטיסים.
כתיבת מפרט פונקציונלי מפורט לתיעוד תהליך פיתוח החומרה.
מעורבות בקונספט התכנוני של פתרונות מכניים/הידראוליים/חשמליים.
השתתפות בתהליכי דיבאג (Debug) ואינטגרציה עם התוכנה.
מציאת הפתרונות היעלים ביותר במחיר הנכון לפתרון הטכנולוגי הנדרש (הנדסת ערך)
ניסיון קודם בחברה תעשייתית במגזר המים - יתרון.
דרישות:
השכלה בהנדסת חשמל / אלקטרוניקה - חובה.
ניסיון של 5 שנים לפחות בתעשייה בתפקידי תכנון ופיתוח אלקטרוני - חובה
אנגלית טכנית ברמה טובה - חובה.
שליטה בתוכנת בתכנון מעגלים בעזרת עורך מעגלים - חובה.
ניסיון בעבודה עם מערכות ERP.
ניסיון והבנה בתהליכי ייצור כרטיסים - חובה.
ניסיון בהובלה של חקר תקלה - יתרון משמעותי.
ניסיון בתחום המוצרים הרב תחומיים - יתרון משמעותי.
אחריות אישית גבוהה, יכולת עבודה בצוות ומול ריבוי ממשקים, ראייה מערכתית לצד ירידה לפרטים ויוזמה אישית לקידום תהליכים. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8690241
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
דרושים בStartica
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
לאתר החברה ביוקנעם דרוש.ה מהנדס.ת אלקטרוניקה לפיתוח רכיבי FPGA עבור מגוון של מוצרים בתחום היבשה
דרישות:
דרישות:
תואר ראשון בהנדסת אלקטרוניקה
לפחות 3 שנים ניסיון בפיתוח FPGA
ידע וניסיון נרחב בכלי הפיתוח של ALTERA XILINX
ניסיון מעשי באינטגרציה ודיבאג
ניסיון ב- Board Design- יתרון
ידע בווידיאו- יתרון
יכולת עבודה בצוות. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8688505
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
סטארטאפ טכנולוגי מגייס system Engineer מנוסה להצטרף לצוות קטן ולהוביל תחום מרכזי עם אחריות מלאה מקצה לקצה, בסביבת פיתוח הכוללת ניסויים מבצעיים על מערכות מורכבות.

מה עושים בתפקיד
התפקיד כולל אחריות מלאה על ההיבט המערכתי של פיתוח מערכות מורכבות, משלב הגדרת הדרישות והארכיטקטורה, דרך אינטגרציה בין תתימערכות ועד בדיקות מערכתיות וניסויים.

העבודה מתבצעת בסביבה מולטידיסציפלינרית וכוללת ממשקים עם תחומי מכניקה, אלקטרוניקה ותוכנה, תוך פתרון בעיות מערכתיות מורכבות בזמן אמת וליווי תהליכי פיתוח מקצה לקצה.

מדובר בתפקיד hands-on הכולל הובלה בפועל של תחום המערכת, עם אחריות גבוהה ועבודה בסביבה דינמית של פיתוח מתקדם.
דרישות:
תואר ראשון בהנדסה (אווירונאוטיקה / חשמל / מכונות או דומה)
ניסיון של 5+ שנים בהנדסת מערכת של מערכות מורכבות (עדיפות לניסיון משמעותי)
ניסיון במערכות תעופתיות (מטוסים / טילים / מערכות אוויריות)
ניסיון בעבודה בסביבה מולטידיסציפלינרית
ניסיון בהובלת אינטגרציה בין תתימערכות
יכולת עבודה hands-on ולקיחת אחריות מלאה על תחום

יתרון
ניסיון במערכות UAV
ניסיון עם מערכות אוויוניקה / בקרה
ניסיון בניסויים מערכתיים / ניסויים מבצעיים

למה המשרה מעניינת
תפקיד עם ownership מלא על תחום מרכזי
עבודה על מערכות מורכבות בסביבה מתקדמת
שילוב של ארכיטקטורה, אינטגרציה ופתרון בעיות בפועל
הזדמנות להיות חלק מרכזי בצוות קטן עם השפעה ישירה
* משרה מס #961655 מיועדת לגברים ונשים כאחד המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8673567
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 4 שעות
מיקום המשרה: נתניה
סוג משרה: משרה מלאה
תכונות העובד/ת:
-יכולת עבודה בצוות, יכולת קבלת ביקורת, ניסוח והבעת דעה.
- מוכנות לעבודה בשעות נוספות.
-יכולת קריאת שרטוטי הרכבה.
- יכולת עבודה עם מיקרו מכאניקה, עבודה עם רכיבים אופטיים, עבודה נקייה ומהירה.
-יכולת ריכוז בעבודה מונוטונית לאורך זמן.
- אמינות, דיווח אמת.
דרישות:
-עדיפות לבעלי ניסיון עם הרכבות אלקטרואופטיות, נשק.
-לדוברי שפות עברית ורוסית.
משרה מלאה
שכר/תנאים סוציאליים זמינים לאחר ראיון/פגישה אישית.
* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8665568
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
מיקום המשרה: נתניה
סוג משרה: משרה מלאה
תיאור התפקיד:
עבודה בצוות האחראי על תכנון, בדיקות ואיתור תקלות בספקי כוח ומעגלים אנלוגיים, וכן הכנת תיעוד טכני. התפקיד כולל תמיכה הנדסית לאורך מחזור חיי המוצר.
דרישות:
דרישות התפקיד:
תואר ראשון (B.Sc.) בהנדסת חשמל.
ניסיון של שנתיים כמהנדס/ת אנלוג/הספק.
ניסיון מוכח בעבודה עם ציוד מעבדה כגון אוסצילוסקופ ועומסים אלקטרוניים.
ידע במעגלים אנלוגיים ובטופולוגיות של ספקי כוח (Buck, Boost, Flyback וכו').
ניסיון באיתור תקלות בלוחות (Power, Analog, Digital).
אנגלית טכנית טובה.
יכולות עבודה ידניות טובות (הלחמות, חיווט וכו').
יתרון: ידע במעגלים דיגיטליים/תקשורת.
יתרון: ידע ב-VHDL/Verilog/ C.
יתרון: ידע בתכנון מגנטי.
יתרון: ידע בלולאות בקרה (Feedback Control Loop). המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8587050
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
Location: Netanya
Job Type: Full Time
Overall responsibility for precision tracking technical project management at R&D including planning and monitoring of all R&D activities, planning and monitoring of project R&D budget (material and hours), lead of technical activities with the customer including design reviews, acceptance testing and system assimilation.
Overall responsibility of the system level architecture of complex systems
Overall responsibility for System, Software and Hardware level specifications and requirements.
Overall responsibility and active participation in the Integration and Proof of Design phases.
Overall responsibility for electrical connectivity design between LRUs
Requirements:
BSc/MSc in Electrical/Electronics-Engineering from a known institute.
ME in System Engineering - advantage
Experience and skills:

5-7 years experience as part of a development team for multi-disciplinary projects.

Experience in Project Management during entire project life cycles.
Experience in writing Requirements and Specification documents, in English
Experience in complex system architecture design
Troubleshooting Experience
Open minded and flexible with high self-teaching skills
Team player who can matrix manage
Fluent in English - speaking, writing, reading.
Knowledge & experience in SATCOM systems - Advantage.
Knowledge in servo and control algorithms, mechanical design, RF communication and RT software - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8688958
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
Location: Netanya
Job Type: Full Time
We are looking to hire an experienced Solutions Engineer in the field of Mobile Satellite Communications (SATCOM) antenna system growing business line to work alongside our passionate sales team for Land, Maritime and Airborne applications. You will be required to conduct meetings with our prospects and customers, draft and deliver presentations, demonstrate the features of company products, manage, and write winning proposals including detailed block diagrams and key features.
To ensure success, you should have in-depth knowledge of complex systems that includes mechanics, software, electronics and RF, and high-level communications and writing skills in English and Hebrew.
The ability to understand customer requirements, determine the best solutions and effectively communicate the value proposition of those solutions are critical skills.
This is a key position that will bare impact on the companys growth and ability to do business.

Responsibilities:
Solutions Engineer is subject matter experts (SME) with specialized technology experience in complex systems, which involves mechanics, electronics, software and RF.
The processes of preparation of all assigned proposals, from requirement analysis and Bid-No-Bid processes, through solution/offering concept, proposal integration and write-up, and up to completion of the proposal documentation, risk analysis, competition analysis, costing and presentation to the customer.
Work closely with technical specialists, product managers, subcontractors / potential 3rd party solution partners, sales, finance, R&D, operations, executive team and with other company team members.
Ensure that the proposal conforms to the requirements, instructions, evaluation criteria and the SOW.
Develop and maintain proposal generation processes and tools, as well as proposal templates.
The Solutions Engineer must be well-versed in the selling companys portfolio of products and services and keep up with new technologies entering the market.
Provides coaching and professional development to the sales team member associates to enhance their product knowledge, technical acumen, and technical sales skills.
Perform Link Budget Analysis
Requirements:
Bachelors degree in Electronics with combination of education and experience in complex systems

Profile & Experience:
At least 5 years of proven experience in leading Pre-Sales / Solutions Engineering processes of multidisciplinary proposals, which combine electronics, software, mechanics and RF.
Proven technology skills, outstanding interpersonal abilities, and strong written and verbal communication skills
Strategic thinker and ability to formulate market discriminators
Proven knowledge and experience in Satellite Communication
Willingness to travel
Advantage - Proven experience in system engineering of multidisciplinary systems which combine electronics, software, mechanics and RF.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8688976
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
חברה חסויה
Location: Netanya
Job Type: Full Time
Review of Contract ,Customer SOW and SPEC requirements to ensure compliance of design and production.
Approve gates review at R&D
PLCM (Project Life Cycle Management) - process control, full partnership in project management during the development, testing, production, customer delivery and customer support phases throughout the product life
Identifying regulatory Gaps in new and carrent projects
Perform Internal and External Audits
QA presence in R&D process (capacity) and ability to prevent errors in design
Follow up after R&D corrective and preventive actions and Improvement Plans
Transfer products from development to NPI and serial production (QA activities)
Review and approval ECO / MCO / ATP/ATR, Waiver relate to R&D , ENG
Writing QA procedures
FRACAS Management
Quality Assurance Program Plan (QAPP) and the Quality Allocation Tasks for the program.
Customer complince - relate to NPI , Pre production , design errors
Perform Quarterly data analysis for QBR
Requirements:
Education- Electronic or Mechanical Engineer
3-5 years experience QA Engineer (Electronic / Mechanics) in high tech company
Knowledges: AS9100D
Internal\External auditor course AS9100
CQE is advantage.
QA R&D with knowledge and experience in HW and System QA of defense/airborne applications.
DFx analysis experience is an advantage 1/8.10
Knowledges: IPC-610\IPC-620\ IPC-600, DO-160\DO-178\DO-254,CQE, Internal\External auditor course - advantage
Experienced with ERP system
Computer applications - MS Office ,Statistics .
Reading Drawings and Production files (Mechanics, Electro-mechanics, Electronics).
Languages : Hebrew - high level ,English- high level . Knowledge other languages is advantage.
Strong communication skills to interface with product development, program managers, project manajers, engineering and marketing organizations.
Ability to work in matrix organization
Knowledge of manufacturing processes (Mechanical and Electronics)
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8688973
סגור
שירות זה פתוח ללקוחות VIP בלבד