לוח משרות דרושים מהנדס אלקטרוניקה

Senior RF Engineer.
Responsibilities:
Lead end-to-end RF product development from concept to final design.
Perform RF chain and system -level simulations.
Select RF components and define chipsets, with emphasis on high-power RF designs.
Conduct electromagnetic (EM) simulations.
Prepare RF and DC schematics and support PCB layout activities.
Collaborate closely with software, mechanical, and system engineers.
Support integration, testing, and validation activities.
Produce technical and design documentation.
Location: Center District, Israel.

system Engineer
We are looking for an experienced system Engineer to lead the design and development of complex hardware systems, with a strong focus on board-level design and system integration.
Responsibilities:
Define system architecture and hardware requirements
Lead board-level design and system -level integration activities
Work closely with hardware, software, and mechanical teams
Support board bring-up, debugging, and validation
Write and maintain system and design documentation
Participate in design reviews and technical decision-making.

We are looking for a skilled, creative, and highly motivated Practical Engineer to join the End-to-End (E2E) physical-layer performance team, as part of the Post-silicon department

What youll be doing:

Establishing Electrical and optical setups, to support engineering lab operation.

Lab maintenance, equipment calibrations and sensitive measurements.

Validation and verification of our newest generation products.

Link-level performance characterization, verification, and debugging.

Responsibility for complicated setups establishments, covering both optical and electrical components.

Take an active part in silicon bring-up while managing E2E testing of the newest ASICs, with the objective of driving product to mass production with first-in-class performance.

Characterizing products performance using lab equipment, such as oscilloscope, Spectrum/Network analyzer, Pattern-generator, etc.

Power the Future with us! At our company, we're a global leader in smart energy technology, with over 3,000 employees, offices in 34 countries, and millions of installations worldwide. Our innovative solutions include solar inverters, battery Storage, backup systems, EV charging, and AI-based energy management. We're committed to making clean, green energy the primary power source for homes, businesses, and beyond. With the growing demand for electricity, the need for smart, clean energy sources is constantly rising. we offer amazing opportunities to develop your skills in a multidisciplinary environment, covering everything from research and development to production and customer supply. Work with talented colleagues, tackle exciting challenges, and help create a sustainable future in an industry that's always evolving and innovating. Join us and be part of a company that values creativity, agility, and impactful work. We are looking for a Practical Engineer to join our R&D HW Group. This role will involve working with cutting-edge technologies and contributing to the development of innovative energy Storage solutions. What you will be doing:
* Electrical lab testing Thermal tests, performance tests, PCBA tests,debugging,FA and etc (manual and automatic testing).
* Infra. supporting Building of testing setups, cables, and mechanical assemblies
* Assist the team in the assembly of the product for all needed tests and lab activities.
* Work closely with other departments in order to promote the product
Country:
Israel
City:
Herzliya

Job Description
As a Cyber security system Engineer, you will lead the security engineering aspects of multidisciplinary projects. You will conduct system design surveys, participate in various design and testing stages, and lead cyber and security research in software, firmware, and hardware. Your responsibilities will include: Conducting threat risk analysis, mapping protection targets, designing security architecture and defining appropriate security controls for systems at different maturity and life-cycle phases. Analysing advanced systems and designing cyber and technological security solutions. Planning and executing Cyber security strategies in collaboration with clients and regulatory bodies. Leading and guiding development teams from specification through design to integration. Designing and conducting system proof of concept experiments. Initiating and advancing projects and product development in cyber and security technology. Evaluating existing and future technological solutions. Monitoring the implementation of Cyber security measures in projects and ensuring compliance with security plans.

We are seeking a highly skilled and motivated ATE Engineer to join our Team. This role is critical in supporting and maintaining production line ATE systems, driving continuous improvement, and ensuring seamless integration of testing solutions across multiple product lines. You will lead technical projects, coordinate cross-functional teams, and oversee the implementation of advanced testing infrastructure.
Key Responsibilities Lead the design, development, integration, and maintenance of ATE systems across multiple projects and production lines. Manage ATE projects end-to-end, including requirements gathering, design reviews, gate approvals, scheduling, and presentations. Oversee tester bring-up, integration of mechanical, electronic, Embedded, and software components. Coordinate activities with hardware, software, Embedded, mechanical teams, and external subcontractors. Define and manage tester BOMs, documentation, and transfer processes to production and other manufacturing sites. Provide Tier 2 support for ATE systems in production, including troubleshooting, calibration, and yield improvement. Implement and manage ATE Azure DevOps pipelines for code, sequence, and tester review, execution, and monitoring. Analyze database results using tools for TEST data and reporting. Ensure all relevant documentation is created, verified, and maintained according to company standards. Drive continuous improvement initiatives in ATE processes, tools, and methodologies.

As an RF System Engineer, you will develop solutions for state-of-the-art RFICs in advanced 4G/5G IoT devices. Your responsibilities include designing and supporting all RF aspects of IoT technologies, from RFIC bring-up and system-level performance evaluation to calibration flows and RF measurement tools. You will also collaborate with Architecture, Firmware, Software, and Hardware teams, in addition to providing technical support and addressing customer RF issues.

Responsibilities
Define and implement the RFIC and Peripherals APIs
Development and implementation of advanced RF calibration processes
Simulation and verification of RF calibrations
Testing and analysis issues which raise during development stage
Support customer issues which related to RF

On a typical day, you might start by running measurements on a new RFIC, analyze the data, work with designers to interpret results, update automated test scripts, and participate in team discussions to optimize circuit performance.

Responsibilities
Perform RFIC block-level analysis and characterization
Develop automation tools for RF testing and measurements
Analyze measurement data and prepare reports
Collaborate closely with RFIC designers to optimize designs
Conduct hands-on lab work with spectrum analyzers, oscilloscopes, and signal generators
Maintain and improve testing processes and documentation
Support troubleshooting and problem-solving for RFIC projects

We are looking for an experienced ASIC Physical Design Engineer to join our dynamic team, Join the ride as we spearhead the next revolution in electronics!
What Youll Do:
Own and continuously improve our smooth product backend integration methodology, flows, and best practices using Cadence and Synopsys tools.
Develop, maintain, and scale automation and infrastructure (TCL / Python) to improve quality, predictability, and turnaround time.
Collaborate closely with multiple teams to ensure smooth handoffs and high-quality product.
Support field teams on complex technical issues when needed.
Responsibilities:
Implementation of ASIC units using advanced flows
Developing BackEnd methodology using Cadence and Synopsys tools
Build and develop scripts for physical design implementation
Support Field team with customer issues.

we are seeking a Senior Design Quality Assurance Engineer for our Urology division. This role involves developing, supporting, and managing risk for Medical Electrical Equipment/Systems (MEE/MES) and related accessories as part of New Product Development. Become part of a team shaping the future of the operating room, with a focus on advanced kidney stone treatments and innovative solutions for physicians and patients. Lead the development of safe, high-quality products and make a direct impact on patient care and clinical outcomes.

Your responsibilities include:

Lead product teams within the BSC Quality System to develop new MEE and MES as part of a core group of DQA Engineers supporting the Laser Therapies franchise. Special focus on:
Engagement with project teams for Systems Engineering and Systems Risk Management as a Subject Matter Expert (SME).
Utilize Systems Engineering practices to lead efforts for requirements management/system architecture to align risk mitigations with design inputs, design outputs at different levels (e.g., system / sub-system) for products that are both stand alone, and network connected.
Lead NPD projects as a DQA SME and work with R&D Product Development Engineers to review Hardware/Software systems architecture(s) and identify possible failure modes/risk control opportunities for these complex systems.
Lead Risk Management activities during all phases of Electrical HW/SW design, using design quality assurance principles applicable to FDA/EUMDR-Regulated Class II Medical Device environments (including interconnected software systems).
Participate and lead in the creation and maintenance of Risk Management and Usability deliverables.
Lead and/or support development of NPD Reliability Engineering Program Plans and related reliability program activities.
May perform other duties as directed.

We are looking for an experienced, self-motivated, and creative Board Design Engineer with excellent interpersonal skills to join the Electronics team.
This role includes full ownership of electronic boards as well as hands-on system-level integration, testing, cabling, and support across all Beewise product generations.

What You'll Do

Take full ownership of electronic board design: electrical specifications, schematic design, component selection, PCB layout definition, bring-up, validation, and release to manufacturing
Perform hands-on integration: system debugging, cabling design, electrical harnessing, and troubleshooting across hardware, firmware, and mechanical domains
Design mixed-signal and power circuits (motors, drivers, sensors, protection circuits, DC/DC converters)
Define stack-up and collaborate with PCB vendors on DFM/DFT and EMC-aware design
Work closely with firmware, mechanics, system, product, and operations throughout the design lifecycle
Support production, testing, and continuous improvement of released boards
Collaborate with subcontractors and consultants during design and development phases

The PCBA Production Process Engineer is responsible for designing, optimizing, and managing the processes involved in assembling printed circuit boards (PCBs).
* Production Support: Troubleshoot and resolve technical issues on the production floor, including soldering defects, alignment errors, or component misplacement. Provide Real-Time Technical Support to operators and technicians during production runs. Ensure proper setup, calibration, and maintenance of equipment like reflow ovens, AOI (Automated Optical Inspection).
*  Quality Assurance : ensuring compliance with IPC-A-610 or similar industry standards. Conduct root cause analysis and corrective actions for defects identified during production. validate assembly quality.
* equipment and Technology Integration: Evaluate, procure, and integrate new production equipment or technologies to improve efficiency and quality. Develop and maintain preventive maintenance schedules for manufacturing equipment. Ensure compatibility and proper usage of consumables like solder paste, stencils, and components.
Country:
Israel
City:
Ziporit