לוח משרות דרושים מהנדס אלקטרוניקה משרה מלאה, לחיפוש זה נמצאו 342 משרות

DRS RADA Technologies , a leading defense company developing and manufacturing life-saving radar systems, is looking for an MRO Operator to join our site in Beit She’an. Job Description:
* Perform functional testing of electronic boards using both manual and automated testing methods, utilizing advanced test equipment such as a multimeter, spectrum analyzer, and signal generator.
* Work with computerized systems to analyze test results, troubleshoot failures, and identify faults in accordance with strict procedures and quality standards.
* Analyze and repair electronic boards with complex failures.
* Identify faults and work with electronic schematics and circuits down to the component level.
* Full-time position: Sunday–Thursday, 08:00–17:00, with overtime and Friday work as required.

We are looking for a Junior Production Testing Engineer to join our Operation Engineering department.
You will support the operations and maintenance of our Automated Test Equipment (ATE). In this role, you will assist in the transfer, optimization, and daily efficiency of ATE systems on the production line and for RMA processes, helping to ensure our products meet the highest quality and manufacturing standards.

You will report to the Production Engineering Manager.

Location
On-site - Working daily from our office in Caesarea



What you will be doing:

ATE Transfer & Implementation: Support the transfer and integration of ATE systems from development into the mass production line, assisting senior engineers with project execution.
Production & RMA Efficiency: Monitor ATE performance on the floor. Help identify opportunities for efficiency improvements, optimize test times, and support processes for active production lines and Return Merchandise Authorization (RMA) units.
Test Infrastructure: Assist in setting up, installing, validating, and maintaining ATE test stations and infrastructure.
Cross-Functional Collaboration: Work collaboratively with ATE development, Hardware (HW), and R&D teams to support daily manufacturing operations and help troubleshoot test-related issues.
Data-Driven Optimization: Help analyze ATE test data and yield metrics to highlight potential process improvements, throughput increases, and cost-reduction initiatives.
Technical Troubleshooting: Read and interpret electrical schematics and technical data sheets to support production test processes and ensure adherence to standard specifications.
Reporting & Analysis: Assist in generating reports and presentations detailing root-cause analysis, corrective actions, and standard follow-ups.

We are looking for Engineering Product Leader to join our team.

You will report to the Sr. Product Engineering Manager.



Location

On-site - Working daily from our office in Caesarea



What you will be doing:

Lead products deliverables and timelines. Responsible for NPI Processes of the company product lines

Lead Sustain engineering processes and provide engineering support across the company

Performing process validation for Engineering changes in the production line.

Collaboration with R&D, quality, and production depts. on a daily basis

Efficiency and improving production processes including electronic and mechanical assembly.

Participation in failure studies and problem-solving discussions.

Approving parts and components' SPEC deviations, and instructing for rework if needed

Develop and document Manufacturing, assembling & testing processes.

Ownership of the entire product, manage and lead the engineering changes of the product during its lifecycle

We are looking for a Sr. Production Testing Engineer to join our Operation Engineering department.
You will be the primary operations owner for our Automated Test Equipment (ATE). In this critical role, you will lead the transfer, optimization, and daily efficiency of ATE systems on the production line and for RMA processes, ensuring our products meet the highest quality and manufacturing standards.

You will report to the Production Engineering Manager.



Location
On-site - Working daily from our office in Caesarea



What you will be doing:

ATE Transfer & Implementation: Lead the seamless transfer and integration of ATE systems from development into the mass production line, taking full end-to-end responsibility for the project.
Production & RMA Efficiency: Take absolute ownership of ATE performance. Drive continuous efficiency improvements, optimize test times, and streamline processes for both active production lines and Return Merchandise Authorization (RMA) units.
Test Infrastructure: Set up, install, validate, and maintain ATE test stations and infrastructure directly on the production floor.
Cross-Functional Collaboration: Partner closely with ATE development, Hardware (HW), and R&D teams to support manufacturing operations and resolve complex test-related bottlenecks.
Data-Driven Optimization: Analyze ATE test data and yield metrics to proactively identify process improvements, increase throughput, and drive cost-reduction initiatives.
Technical Troubleshooting: Read, interpret, and analyze electrical schematics and technical data sheets to oversee production test processes and ensure adherence to standard specifications.
Reporting & Analysis: Generate comprehensive reports and executive presentations detailing root-cause analysis, corrective actions, and rigorous follow-ups.

We are seeking great talent to help us build The DNA of tech.
our company manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.
Do you want to help us build the DNA of tech.? our company Dimona is currently seeking applicants for a Process Engineer. You will be responsible for designing, evaluating, and optimizing production processes to improve efficiency, reduce waste and cost, and ensure product quality.
What you will be doing:
Monitor and improve production processes in line with product specifications and quality standards.
To identify and analyze process issues and recommend improvements to increase efficiency and reduce waste.
To create and maintain production documentation, such as standard operating procedures and work instructions.
To collaborate with other departments, such as Manufacturing, Quality Assurance, and Research and Development, to ensure smooth production processes.
Identify opportunities for improvement and implement solutions.
To train and mentor production and maintenance teams on new processes and equipment.
Run engineering experiments to qualify new process, raw materials and equipment
Perform statistical analysis for change validation.

We are seeking great talent to help us build The DNA of tech.
our company manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.
Do you want to help us build the DNA of tech.? our company Dimona is looking for a Maintenance Electronic Engineer to join our Maintenance Department. You will be for the maintenance of machines and equipment used in the production and distribution process of a company.
What you will be doing:
Maintain, develop, and improve equipment across the production floor.
Collaborate with R&D, engineering, maintenance, and production teams.
Provide service and support to maintenance and production departments.
Designing and developing new equipment (e.g., PCB boards) and participating in discussions.
Writing PLC programs and resolving communication issues.
Supporting equipment post-production transfer.
Enhancing existing equipment to improve efficiency or replace obsolete components.

The Cellular group is looking for an extraordinary Systems and Algorithms engineer with extensive experience in signal processing, communication systems, and feature integrations to develop and drive pioneering technologies for our products. As part of the team, you will work on the recent cellular technologies, LTE, 5G, and 6G, to develop and integrate solutions on the cellular Modem, focusing on defining and integrating new solutions. You will have the chance to be part of an exciting development process that brings new solutions to life in groundbreaking areas of cellular chip development, which is a key part of our products.

Leading role in developing and integrating features in the systems and algorithms for Cellular modems. You will be working on pre and post-silicon system development activities to achieve full operation and optimization of PHY/L1 modules such as AGC, DPD, advanced time-domain processing, channel estimation, demodulation, and decoding, in a highly complicated wireless communication device.
We are looking for a highly reciprocal individual who can excel in performing the integration of these modules in the system with a comprehensive full-stack understanding and with the ability to analyze issues in the lab and field, which are related to L1, MAC, and RRC procedures, with tight multi-functional work with RF, HW, FW, and SW teams.

DRS RADA is a global pioneer of RADAR systems for active military protection, counter-drone applications, critical infrastructure protection, and border surveillance. We are looking for a motivated and detail-oriented Junior SMT Process Engineer to join our team.
Key Responsibilities
* Provide day-to-day engineering support for SMT production lines.
* Monitor and optimize SMT manufacturing processes to ensure high quality, yield, and productivity.
* Investigate and resolve process-related issues through root cause analysis and corrective actions.
* Support New Product Introduction (NPI) activities, including process development, validation, and production readiness.
* Develop, update, and maintain process documentation, work instructions, and manufacturing procedures.
* Analyze production data and implement process improvements to enhance efficiency and reduce defects.
* Support process qualification, equipment validation, and continuous improvement initiatives.
* Work with SMT equipment, including solder paste printers, pick-and-place machines, reflow ovens, SPI, AOI, and X-Ray inspection systems.
* Collaborate with Production, Quality, Maintenance, Manufacturing Engineering, and R&D teams to resolve manufacturing challenges.
* Ensure compliance with IPC standards, ESD requirements, company procedures, and safety regulations.

Based in Jerusalem, you will contribute to our urban railway and LRT projects in the city, as well as future transportation projects in Israel. You will lead the OCS/OHLE engineering scope and site construction supervision, provide high-level expertise and oversee the design and implementation of OCS/OHLE systems on the LRT Blue Line.
Reporting to the Technical Manager and Project Manager, your responsibilities will include, but are not limited to:
Providing expert knowledge of Overhead Contact System (OCS) design principles in accordance with applicable international standards, incorporating lessons learned and industry best practices to support Engineering Monitoring and Consultancy (EMC) services.
Reviewing detailed design documentation, calculation notes, manufacturers submissions, and equipment approval processes prepared by the Design & Build (D&B) Contractor to ensure compliance with tender specifications, international standards, and state-of-the-art OCS/OHLE solutions.
Preparing Design Review Sheets (DRS) for submitted design documents.
Reviewing OCS designs (including foundations, poles, anchoring systems, calculation notes, contact wire leveling, tensioning systems, earthing and bonding, lightning protection, voltage-triggering devices, etc.) for both at-grade and underground tunnel sections, and recommending improvements.
Providing ongoing technical support to the clients engineering team regarding project activities.
Preparing technical queries and requests to contractors related to design, procurement, installation, testing, and commissioning-particularly at interface points with the J-Net project (existing Red Line and new Green Line).
Participating in and coordinating weekly meetings on OCS/OHLE activities, including design reviews, system integration, interface management with the existing J-Net project, and site testing supervision, involving all stakeholders (State authorities, designers, and project company).
Coordinating with other discipline experts (civil works, track, power supply, etc.) as required.
Monitoring and reporting progress to the Technical Manager and participating in regular progress review meetings.
Reviewing preliminary OCS designs for planned extensions of the Jerusalem tramway network.
Conducting site supervision visits to assess, monitor, and report on construction activities, identifying deficiencies and ensuring corrective actions are implemented by the contractor.
Representing the OCS/OHLE discipline in meetings with the client, contractors, and stakeholders as required.

The Project Manager - Global Lumina Scanner Engineering Department is accountable for leading, coordinating, and executing cross‑functional engineering projects across the full product lifecycle, including NPI, sustaining engineering, production support, test infrastructure, and continuous improvement.
The role ensures alignment between Engineering, Operations, R&D, Quality, and Supply Chain, enabling predictable execution, clear ownership, and end‑to‑end visibility of all engineering initiatives.

Key Responsibilities
Lead and manage multiple engineering projects in parallel across NPI, sustaining, test, electronics, and system engineering.
Build and maintain integrated project plans, milestones, dependencies, and critical paths.
Drive execution through all project phases - definition, planning, execution, validation, and closure.
Coordinate design transfer, manufacturing readiness, validations, and GA milestones.
Own project governance: status reviews, KPIs, risk management, escalation, and decision tracking.
Drive cross‑functional alignment between R&D, Manufacturing, Test, Quality, Supply Chain, IT, and Program Management.
Manage ECO‑driven projects and ensure full impact analysis, execution, and closure.
Support supplier‑related projects including readiness, FAIs, tooling, and ramp‑up activities.
Establish clear ownership, priorities, and communication cadence across all stakeholders.
Provide consolidated, real‑time visibility of project status to management.

DRS RADA is a global pioneer of RADAR systems for active military protection, counter-drone applications, critical infrastructure protection, and border surveillance. Join a leading defense technology company and take a key role as a Test Equipment Team Leader within a dynamic manufacturing environment, supporting the development of advanced, life-saving radar systems. Professional management and leadership of a technical test equipment team for the company, working with subcontractors, with responsibility for the installation, maintenance, calibration, and operation of electromechanical systems and control equipment. The role includes working with engineering, production, and quality interfaces, maintaining a high level of performance, meeting schedules, and ensuring ongoing coordination with relevant stakeholders. Key Responsibilities
* Leading the technical test equipment team at subcontractors on behalf of RADA.
* Assigning tasks, monitoring execution, tracking progress, and providing professional support.
* Responsibility for assembly, integration, maintenance, and troubleshooting of electromechanical systems.
* Working with engineering, production, quality, and operations teams at RADA and its subcontractors.
* Maintaining order, organization, accuracy, and achievement of objectives.
* Leading the team to meet quality, availability, and operational requirements.