לוח משרות דרושים חשמל ואלקטרוניקה

Which team will you join? our company EyeC VLSI team - a group designing the chips for Radar systems for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
You will take a central hands-on role in Design Verification.
Define Environment micro-Architect, Implement complex UVM environment, Build vPlan .
Execute coverage implementation.
Be part of external IP verification and Internal custom IP.
Be part of System definition and top-level activity.
Take part in Silicon bring-up.

we are seeking a skilled Failure Analysis (FA) Engineer with expertise in X-ray inspection techniques to join our AV Platform team. The ideal candidate will specialize in using advanced X-ray imaging and other analysis methods to investigate product failures, identify root causes, and provide actionable insights to improve product quality and reliability
What will your job look like?
Perform detailed failure analysis using X-ray imaging systems and related diagnostic tools to inspect electronic components, assemblies, and materials.
Interpret and analyze X-ray images to detect structural anomalies, defects, voids, cracks, delamination, and other failure mechanisms.
Develop and optimize X-ray inspection procedures and protocols for failure analysis and quality control.
Prepare test specimens: cutting, mounting, grinding, polishing and chemical etching
Collaborate with product engineering, quality assurance, and manufacturing teams to support product development, troubleshooting, and continuous improvement efforts.
Prepare detailed technical reports documenting findings, root cause analyses, and recommended corrective actions.
Support reliability testing and failure mode analysis for new and existing products.

our company's EyeQ Platform Group (EPG) is seeking a motivated Formal Verification Engineer to join our team and contribute to development of hardware verification environments. This position offers an opportunity to apply formal methods to verify the correctness of various complex digital systems. This is an exciting opportunity to join a team of talented engineers, working cutting edge technologies in the field of autonomous vehicle.
What will your job look like:
Be the owner of formal verification environment from first draft to sign-off stage
Apply formal methods to verify the correctness of various complex digital systems
Work with HW architects\designers to define assumptions, rules and cover properties
Help define the formal verification methodology and environment to be applied by the team
Explore new Formal methods and Tools
Work with tools like Cadence JasperGold, Verisium manager, Xcelium, Indago
Analyze verification results, identify bugs, and collaborate with engineers to resolve design issues
Develop generic formal blocks\functions of commonly used logic, to be later used off the shelf.

we are currently seeking a skilled HVAC Technician to join their team at their site in Jerusalem. The HVAC Technician will be responsible for installing, maintaining, and repairing heating, ventilation, air conditioning, and refrigeration systems to ensure optimal performance and comfort within the facility.
What will your job look like:
Installing, inspecting, and maintaining HVAC and refrigeration systems.
Troubleshooting and repairing HVAC and refrigeration equipment as needed.
Performing routine maintenance tasks such as cleaning, lubricating, and adjusting system components.
Diagnosing electrical and mechanical faults for HVAC systems and making necessary repairs.
Responding promptly to service calls and addressing issues efficiently to minimize downtime.
Ensuring compliance with safety and environmental regulations.
Keeping accurate records of maintenance and repair work performed.
On call 24/7 for critical faults.

You will join a team of talented and experienced Signal/Power Integrity (SI/PI) & Electrical Validation engineers with wide scope of responsibility, from Pre-Silicon SI/PI simulations to Post-Silicon Electrical validation and debugging, covering all High-Speed interfaces and Power Delivery of our company EyeQ ASIC products. We are looking for a talented and motivated Masters graduate in Electrical Engineering, with strong interest in Electromagnets and Microwaves, to join our Power Integrity team at our company.
What will your job look like:
You will deal with design, simulations, optimization and debugging of high-speed interfaces like LPDDR4/5, PCIe Gen4/5, C/DPHY, Multi Giga-Bit Ethernet, High-Speed interfaces over Power Cables, Power Delivery Networks.
You will develop layout guidelines, review the physical design process and check its quality.
You will deal with state-of-the-art signal & power integrity simulation tools and methodologies, advanced results analysis, optimization/verification of our company and customers' PCB designs, etc.
This is a dynamic work environment that requires interfacing with Silicon & Hardware design engineers, IP providers, Electrical and System Validation teams, Customer Application Engineers, EDA tools vendors, and product managers.
The proximity to Electrical Validation activities we are a single SI/EV team is another strong advantage, enabling joint simulation-measurements efforts.

our company's EyeC VLSI team - a group designing the chips for RADAR systems from advanced ADAS to Full Autonomous Driving. Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an E2E responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design CAD Expert to join the growing Technology Methodology & Execution team, that is responsible for developing both Technology Methodologies & Flows for all products and processes and the execution of complex Subsystems/IPs for our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Participate in the development of flows & methodologies from Synthesis , Place& Route & all signoff flows.
Plan & execute flow releases, coordinate & track development tasks.
Exploration of different methodologies from P&R till signoff to improve PPA & Turnaround time.
Evaluation of new tools features and methodologies to bring innovation with significant RoI.
Hands-on physical design block ownership end to end, from Synthesis floor planning, Place & Route with target to achieve best PPA.
Signoff on all domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.
Serve as the technical lead while mentoring and guiding team members.

our company's EyeC VLSI team - a group designing the chips for RADAR systems from advanced ADAS to Full Autonomous Driving. Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an E2E responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design CAD Expert to join the growing Technology Methodology & Execution team, that is responsible for developing both Technology Methodologies & Flows for all products and processes and the execution of complex Subsystems/IPs for our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Lead the development of flows & methodologies from Synthesis, Place & Route & All signoff flows.
Plan & execute flow releases, coordinate & track development tasks between the team.
Exploration of different methodologies from P&R till signoff to improve PPA & Turnaround time.
Evaluation of new technologies tools & features and to bring innovation with significant RoI.
Serve as the technical lead while mentoring and guiding team members.

Which department will you join? our company's VLSI team - a group designing the EyeQ chips for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering. Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.

our company's EyeC VLSI team - a group designing the chips for RADAR systems from advanced ADAS to Full Autonomous Driving. Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an E2E responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design Expert to join the growing Technology Methodology & Execution team, that is responsible for developing both Technology Methodologies & Flows for all products and processes and the execution of complex Subsystems/IPs for our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block or IP owner from RTL to GDS with horizontal domain ownership.
Collaboration with front-end and architecture teams to address issues, define design methodologies and improve QoR & convergence.
End to End ownership from Synthesis, DFT insertion, Floor Planning , Place & Route till signoff.
Signoff on all domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.
Exploratio of different methodologies from P&R till signoff to improve PPA & Turnaround time.
Evaluation of new technologies tools & features and to bring innovation with significant RoI.
Technical support and mentoring the engineers in the team.

our company's EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars. Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design STA Technical Expert to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Leading FC timing activities & methodologies for brand New SoC, from definition to TO.
Writing design constraints (SDC) for FC/IP/Block levels for all modes.
Involved in chip architecture definition for functional & DFT domains.
Working in close collaboration with the front-end & architecture team.
Working with engineers to identify and overcome roadblocks and obstacles.
Defining AC timing from spec to implementation.
Supporting complex clock structures.

our company's EyeC VLSI team - a group designing the chips for RADAR systems from advanced ADAS to Full Autonomous Driving. Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an E2E responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design Expert to join the growing Technology Methodology & Execution team, that is responsible for developing both Technology Methodologies & Flows for all products and processes and the execution of complex Subsystems/IPs for our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Leading Subsystem/IP Layout activities for complex Sub Full Chip with several levels of hierarchies.
Floorplanning, top-down deliveries & bottom up rollup , Sub FC/ IP level integration & verification.
Signoff on all physical design domains PV, IR/EM, LEC, LP Verification.
Physical Verification expert, building, maintaining and enhancing the flow for new technologies, improving reliability & convergence ToT.
Servings as a technical expert while mentoring and guiding team members,
Hands-on physical design block owner from RTL to GDS , an option.

our company's EyeC VLSI team - a group designing the chips for RADAR systems from advanced ADAS to Full Autonomous Driving. Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an E2E responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design Timing Expert to join the growing Technology Methodology & Execution team, that is responsible for developing both Technology Methodologies & Flows for all products and processes and the execution of complex Subsystems/IPs for our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Leading Subsystem/IP Timing activities for complex Sub FullChip with several levels of hierarchies.
Timing rollup , analysis & of blocks & sub system levels & timing signoff on Function & Scan models on Sub FC /IP level.
Define timing signoff methodologies, corners, derates margins and improve QoR & convergence.
Involved in the chip design & architecture definition for both functional & DFT domain.
Serve as the technical STA lead while mentoring and guiding team members.

You will join a team of talented and experienced Signal/Power Integrity (SI/PI) & Electrical Validation engineers with wide scope of responsibility, from Pre-Silicon SI/PI simulations to Post-Silicon Electrical validation and debugging, covering all High-Speed interfaces and Power Delivery of our company EyeQ ASIC products.
What will your job look like:
You will deal with design, simulations, optimization and debugging of high-speed interfaces - like LPDDR4/5, PCIe Gen4/5, C/DPHY, Multi Giga-Bit Ethernet, High-Speed interfaces over Power Cables, Power Delivery Networks.
You will develop Layout guidelines, review the physical design process and check its quality.
You will deal with state-of-the-art signal & power integrity simulation tools and methodologies, advanced results analysis, optimization/verification of our company and customers' PCB designs, etc.
This is a dynamic work environment that requires interfacing with Silicon & Hardware design engineers, IP providers, Electrical and System Validation teams, Customer Application Engineers, EDA tools vendors, and product managers.
The proximity to Electrical Validation activities - we are a single SI/EV team - is another strong advantage, enabling joint simulation-measurements efforts.

You will join a team of talented and experienced Signal/Power Integrity (SI/PI) & Electrical Validation engineers with wide scope of responsibility, from Pre-Silicon SI/PI simulations to Post-Silicon Electrical validation and debugging, covering all High-Speed interfaces and Power Delivery of our company EyeQ ASIC products.
What will your job look like:
You will deal with design, simulations, optimization and debugging of high-speed interfaces - like LPDDR4/5, PCIe Gen4/5, C/DPHY, Multi Giga-Bit Ethernet, High-Speed interfaces over Power Cables, Power Delivery Networks.
You will develop Layout guidelines, review the physical design process and check its quality.
You will deal with state-of-the-art signal & power integrity simulation tools and methodologies, advanced results analysis, optimization/verification of our company and customers' PCB designs, etc.
This is a dynamic work environment that requires interfacing with Silicon & Hardware design engineers, IP providers, Electrical and System Validation teams, Customer Application Engineers, EDA tools vendors, and product managers.
The proximity to Electrical Validation activities - we are a single SI/EV team - is another strong advantage, enabling joint simulation-measurements efforts.

We are seeking an experienced and driven Quality and Reliability (Q&R) Engineer to own and manage the qualification and long-term reliability of advanced automotive semiconductor products. In this role, you will be responsible for defining, executing, and ensuring product compliance with industry standards (e.g., AEC-Q100, JEDEC, ISO26262), collaborating cross-functionally with design, test, packaging, and manufacturing teams to ensure robust quality performance throughout the product lifecycle.
What your job will look like:
Lead end-to-end quality and reliability activities for new automotive product introductions (NPI), including definition of Q&R plans, stress test strategy, and execution of qualification.
Define and align qualification strategy with AEC-Q100, JEDEC (JESD22), and customer-specific requirements.
Drive reliability risk assessments (FMEA, FMEDA, fault tree analysis) in collaboration with functional safety and design teams.
Manage product qualification timelines, budgets, and documentation, including reliability test reports, risk mitigation plans, and deviation justifications.
Interface with OSATs and test/assembly partners to ensure reliability test execution, including HTOL, ELFR, HAST, PTC, HTSL, and solder joint reliability.
Lead root cause analysis and corrective actions for product or qualification-related failures (FA/8D process).
Act as the Q&R voice in cross-functional reviews (DFX, tape-out, production ramp, and PCN).
Track field returns, drive reliability monitoring, and contribute to continuous improvement activities.
Support audits, customer quality inquiries, and product certifications as needed.