דרושים » הנדסה » Senior Digital Signal Processing Engineer, Cloud

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
Location: Haifa and Tel Aviv-Yafo
Job Type: Full Time
Required Senior Digital Signal Processing Engineer, Cloud
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will be responsible for turning communication theory into efficient, bit-exact silicon logic. You will take high-level models and transform them into the high-speed DSP blocks that anchor our next-gen architecture.
Responsibilities
Design and implement DSP algorithms for high-speed PHYs, focusing on feed-forward equalization (FFE)/decision feedback equalization (DFE) and timing recovery loops.
Perform fixed-point analysis to minimize bit-width (area/power) while maintaining the required signal-to-noise ratio (SNR).
Develop bit-exact C++/SystemC models to verify register-transfer level (RTL) against architectural intent.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical field or equivalent practical experience.
8 years of experience in digital signal processing (DSP) design or high-speed digital logic design.
Experience implementing digital blocks for communication systems or physical layer (PHY) architectures (e.g., filters, interpolators, or timing recovery).
Experience in MATLAB, Python, or C++ for algorithm modeling and fixed-point analysis.
Preferred qualifications:
Master's or PhD degree in Electrical Engineering, Computer Engineering, or a related technical field or equivalent practical experience.
Experience with fin field-effect transistor (FinFET) process nodes (5nm, 3nm) and timing closure at GHz frequencies.
Experience with universal verification methodology (UVM) verification environments.
This position is open to all candidates.
 
Hide
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642049
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Staff DSP Design Engineer, Cloud
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As the architect for high-speed data paths, you will define the roadmap for scaling interconnect speeds. You will evaluate and select key technologies such as Co-Packaged Optics (CPO), advanced modulation formats, and new Forward Error Correction (FEC) methods to support future Artificial Intelligence (AI) computing clusters.
Responsibilities
Identify the "limits of physics" for current Digital Signal Processing (DSP) architectures and pivot the team toward next-generation solutions, such as Machine Learning (ML)-based equalization or Optical-specific DSP.
Define the requirements for DSP test chips to validate new architectures in advanced nodes before they hit production.
Drive the long-term power-reduction roadmap, ensuring our interconnects do not become the thermal bottleneck.
Represent us in the Optical Internetworking Forum (OIF) and Institute of Electrical and Electronics Engineers (IEEE) standards, ensuring our hyperscale requirements for latency and power are reflected in global specifications.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, a related technical field, or equivalent practical experience.
12 years of experience in Silicon Architecture, Mixed-Signal DSP, Communication Theory, or Systems Engineering.
Experience defining architectural specifications for high-bandwidth interconnects.
Experience with silicon development from initial concept through to high-volume production (Graphic Design System II (GDSII) to market).
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering, or a related technical field.
Experience representing organizations in industry standards bodies (e.g., IEEE, OIF, PCIe-SIG, or CXL).
Understanding of advanced low power DSP implementation.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8641377
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required SoC Vision Architect, Silicon, Cloud
About the job
In this role, youll work to shape the future of AI/ML hardware acceleration. You will have an opportunity to drive cutting-edge TPU (Tensor Processing Unit) technology that powers our most demanding AI/ML applications. Youll be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our TPU. You'll contribute to the innovation behind products loved by millions worldwide, and leverage your design and verification expertise to verify complex digital designs, with a specific focus on TPU architecture and its integration within AI/ML-driven systems.
As a SoC Vision Architect in our Silicon team, you will be at the heart of defining the hardware that powers the next-generation of our products. You will bridge the gap between Artificial Intelligence (AI) research and physical silicon, architecting the Image Signal Processor (ISP), CODECS and the pixel data path. You will deliver unparalleled image quality while staying within the tight Power, Performance, and Area (PPA) constraints. You will participate in the concept, architecture, documentation, and implementation of a new product.
Responsibilities
Define a flexible imaging pipeline hardware architecture, from the sensor interface (e.g., Mobile Industry Processor Interface (MIPI)) through the ISP, the encoder/decoder, scaling and memory output.
Partner with our research to transform advanced computational imaging algorithms into high-efficiency hardware logic.
Conduct trade-off analyses between power, performance, and silicon area to meet thermal envelopes and current limitations.
Influence external executive vendor roadmaps, ensuring deep co-optimization between their future products and our custom silicon.
Lead collaboration across Architecture, Register-Transfer Level (RTL), Physical Design and Validation teams.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, or equivalent practical experience.
15 years of experience in SoC architecture, specifically focusing on imaging (JPEG), video (H.264, H.265, AV1) and Image Signal Processor (ISP).
Experience in Complementary Metal Oxide Semiconductor (CMOS) image sensor architecture.
Experience in writing architecture specifications.
Preferred qualifications:
Masters degree or PhD in Electrical Engineering, Computer Engineering, or a related field.
Experience working with various Software Driver teams.
Familiarity with deploying neural networks on specialized hardware (e.g., Neural Processing Units (NPUs)/TPUs) for imaging tasks (e.g., AI-based denoising or super-resolution).
Knowledge of Mobile Industry Processor Interface (MIPI) (e.g., C-PHY/D-PHY) and memory subsystem interactions (e.g., Dynamic Random Access Memory (DRAM)/Low-Power Double Data Rate (LPDDR)).
Knowledge of hardware/software interfaces.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642054
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
חברה חסויה
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required SoC DFT Engineer, Cloud
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a System on a Chip (SoC) Design for Test (DFT) Engineer, you will be responsible for defining, implementing, and deploying advanced DFT methodologies for digital or mixed-signal chips. You will define silicon test strategies, DFT architecture, and create DFT specifications for next generation SoCs. You will design and verify the DFT logic and prepare for post silicon and co-work/debug with test engineers.
Responsibilities
Develop DFT strategy and architecture (e.g., Memory Built-In Self Test (MBIST), Automatic Test Pattern Generation (ATPG), hierarchical DFT).
Complete all Test Design Rule Checks (TDRC) and design changes to fix TDRC violations to achieve high-test quality.
Insert DFT logic, boundary scan, scan chains, DFT Compression, Logic Built-In Self Test, Test Access Point (TAP) controller, clock control block, and other DFT IP blocks.
Insert MBIST logic including test collar around memories, MBIST controllers, eFuse logic, and connect to core and TAP interfaces.
Document DFT architecture, test sequences, and boot-up sequences associated with test pins.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, a related field, or equivalent practical experience.
4 years of experience with Design For Test (DFT) methodologies, DFT verification, and industry-standard DFT tools.
Experience with ASIC DFT synthesis, simulation, and verification flow.
Experience in DFT specification, definition, architecture, and insertion.
Preferred qualifications:
Master's degree in Electrical Engineering, or a related field.
Experience working with ATE engineers (e.g., silicon bring-up, patterns generation, debug, validation on automatic test equipment, debug of silicon issues).
Experience in IP integration (e.g., memories, test controllers, Test Access Point (TAP), and Memory Built-In Self Test (MBIST)).
Experience in SoC cycles, silicon bringup, and silicon debug activities.
Experience in fault modeling.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642076
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior CPU Design Verification Engineer, Cloud
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will work as part of a Research and Development team. You will build verification components, constrained-random testing, and system testing, and drive verification closure. You will verify digital designs, collaborate closely with design and verification engineers on projects, and perform direct verification. You will build constrained-random verification environments that exercise designs through their corner-cases and expose all types of bugs. You will manage the full life-cycle of verification, which can range from verification planning and test execution to collecting and closing coverage.
Responsibilities
Plan the verification of digital design blocks by fully understanding the design specification and interacting with design engineers to identify important verification scenarios.
Create and enhance constrained-random verification environments using SystemVerilog and UVM, or formally verify designs with SystemVerilog Assertions (SVA) and industry leading formal tools.
Identify and write all types of coverage measures for corner-cases.
Debug tests with design engineers to deliver functionally correct design blocks.
Close coverage measures to identify verification holes and to show progress towards tape-out.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering or equivalent practical experience.
8 years of experience with creating and using verification components and environments in standard verification methodology.
Experience verifying digital logic at RTL level using SystemVerilog or Specman/E for FPGAs or ASICs.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, or a related field.
3 years of experience creating and using verification components and environments in standard verification methodology.
Experience with verification techniques, and the full verification life cycle.
Experience with performance verification of ASICs and ASIC components.
Experience with Application-Specific Integrated Circuit (ASIC) standard interfaces and memory system architecture.
Knowledge of CPU/Processor architectures (e.g., pipeline, cache, memory subsystem, instruction sets, exceptions) like ARM, X86 or RISC-V, is highly beneficial for verifying processor cores or IP blocks.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8641411
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 2 שעות
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior SoC and IP Design Engineer, Cloud
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
Responsibilities
Define the block-level design document (e.g., interface protocol, block diagram, transaction flow, pipeline, etc.).
Perform Register-Transfer Level (RTL) coding (coding and debug in Verilog, SystemVerilog), function/performance simulation debug, and Lint/CDC/FV/UPF checks.
Participate in synthesis, timing/power closure activities.
Participate in test plan and coverage analysis of the block and SoC-level verification.
Communicate and work with multi-disciplined and multi-site teams.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
8 years of experience with digital logic design principles, RTL design concepts, and languages, such as Verilog or SystemVerilog.
Experience with logic synthesis techniques to optimize RTL code, performance and power, as well as low-power design techniques.
Experience with design sign-off and quality tools (e.g., Lint , CDC , etc.).
Experience with SoC or IP architecture.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering, Computer Science, or a related field.
Knowledge of high-performance and low-power design techniques, assertion-based formal verification, Field-programmable Gate Array (FPGA) and emulation platforms, and SoC architecture.
Knowledge in one of the following areas such as Double Data Rate (DDR)/Low Power Double Data Rate (LPDDR), High-bandwidth memory (HBM).
Excellent problem-solving and debugging skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642004
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Design Engineer, Cloud Networking
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
Responsibilities
Define the block level design documents such as interface protocol, block diagram, transaction flow, pipeline, and more.
Perform RTL development (e.g., coding and debug in Verilog, SystemVerilog, VHSIC Hardware Description Language (VHDL)), function/performance simulation debug, and Lint/CDC/FV/UPF checks.
Participate in synthesis, timing/power, and FPGA/silicon bring-up.
Participate in test plan and coverage analysis of the block and SOC-level verification.
Communicate and work with multi-disciplined and multi-site teams.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
8 years of experience architecting networking ASICs from specification to production or equivalent experience.
Experience developing RTL for ASIC subsystems.
Experience in micro-architecture, design, verification, logic synthesis, and timing closure.
Preferred qualifications:
Experience working with design networking: Remote Direct Memory Access (RDMA) or packet processing and system design principles for low latency, high throughput, security, and reliability.
Experience architecting networking switches, end points, and hardware offloads.
Experience working with software teams optimizing the hardware/software interface.
Experience in a procedural programming language (e.g., C++, Python, Go).
Knowledge of TCP, IP, Ethernet, PCIE and DRAM.
Familiarity with Network on Chip (NoC) principles and protocols (AXI, ACE, and CHI).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642078
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 2 שעות
חברה חסויה
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior SOC DFT Engineer, Cloud
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will play a crucial role in Design for Testing (DFT) Architecture and DFT design, and support devices of extreme complexity to production. You will be responsible for providing technical leadership in DFT, developing flows, automation, and methodology, planning DFT activities, tracking the DFT quality matrix throughout the project life-cycle, and providing sign-off DFT to tapeout.
Responsibilities
Lead and execute activities in the design, implementation, and verification of DFT solutions for large-scale ASICs.
Develop DFT strategy and architecture, including hierarchical DFT, Memory Built-In Self Test (MBIST), and Automatic Test Pattern Generation (ATPG).
Work with other Engineering teams (e.g., Design, Verification, Physical Design) to ensure that DFT requirements are met and mutual dependencies are managed.
Manage the DFT team's workload and deliverables, provide technical leadership and guidance to the team.
Lead DFT execution of a silicon project (e.g., planning, execution, tracking, quality, and signoff).
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field, or equivalent practical experience.
8 years of experience in Automatic Test Pattern Generation (ATPG) methods.
Experience with multiple projects in DFT design and verification, DFT specification, definition, architecture, and insertion.
Experience with DFT techniques and tools, ASIC DFT synthesis, simulation, and verification flow.
Experience in leading DFT activities throughout an ASIC development flow.
Preferred qualifications:
Master's degree in Electrical Engineering or a related field.
Experience in JTAG and iJTAG protocols and architectures.
Experience in post-silicon test or product engineering.
Experience in SoC cycles, silicon bring-up, and silicon debug activities.
Knowledge of fault modeling techniques.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642013
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Rק/וןרקג Power and Signal Integrity Engineer, PhD Graduate
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a Power and Signal Integrity Engineer, you will be responsible for the design and characterization of signal and power integrity of our IC designs. You will design the external electrical interfaces of the device, from their Signal/Power-integrity and electrical usage perspectives and set up methodologies, perform simulations, silicon characterization and correlations to ensure our IC designs meet systems design budgets and achieve the highest performance. You will work with systems architects, ASIC design, systems engineers, and partner cross-functionally with teams and external vendors/partners.
Responsibilities
Generate precise electrical models (e.g., S-parameters, SPICE models) for components such as packages, PCBs, and connectors for use in simulations.
Simulate high speed interface electrical behavior using HSPICE or other circuit simulators.
Execute lab measurements utilizing test equipment like oscilloscopes, Vector Network Analyzers (VNA), Time Domain Reflectometers (TDR), spectrum analyzers to validate simulation outcomes and debug signal and power-related issues on silicon prototypes and boards.
Establish design rules and guidelines for optimal signal/power integrity during PCB and package layout, ensuring high production yield and reliability.
Document design specifications, analysis results, and validation reports to ensure compliance with standards and for future reference, while collaborating extensively with cross-functional teams, including ASIC architects, digital/analog designers, physical design/layout engineers, and system engineers.
Requirements:
Minimum qualifications:
PhD degree in Electrical Engineering, Computer Engineering, Physics, a related field, or equivalent practical experience.
Experience in any signal and power integrity domain of electrical engineering through internships, academic research, or publications.
Preferred qualifications:
Experience with industry-standard Electronic Design Automation (EDA) tools for simulation and layout (e.g., Cadence Sigrity/Allegro, Ansys HFSS/PowerDC/Q3D, Keysight ADS, Synopsys HSPICE).
Experience with signal and power integrity modeling and simulation for high-speed interfaces (e.g., LPDDR, MIPI, UFS, PCIe, USB).
Experience with SerDes testing in a lab setting, and familiarity with Ethernet, PCIE, and DDR standards.
Experience in scripting languages such as Python, Perl, or Tcl for flow automation and data analysis.
Familiarity with high-speed testing equipment like VNAs, TDRs, and oscilloscopes for measurement and validation.
Knowledge of circuit analysis, electromagnetics, and transmission line theory.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642051
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 2 שעות
חברה חסויה
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Silicon DFT Lead
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As the Design for Test (DFT) Engineer Lead, you will play a crucial role in DFT Architecture and DFT design, and support devices to production. You will be responsible for providing technical leadership in DFT, developing flows, automation, and methodology, planning DFT activities, tracking the DFT quality throughout the project life-cycle, and providing sign-off DFT to tapeout.
Responsibilities
Lead and execute DFT activities in the design, implementation, and verification solutions for Application-Specific Integrated Circuits (ASIC).
Develop DFT strategy and architecture, including hierarchical DFT, Memory Built-In Self Test (MBIST), and Automatic Test Pattern Generation (ATPG).
Work with other Engineering teams (e.g., Design, Verification, Physical Design) to ensure that DFT requirements are met and mutual dependencies are managed.
Manage a DFT team planning, deliverables, and provide technical mentoring and guidance.
Lead DFT execution of a silicon project, planning, execution, tracking, quality, and signoff.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field, or equivalent practical experience.
8 years of experience in Design For Test from DFT architecture to post silicon production support.
4 years of experience with people management.
Experience with DFT design and verification for multiple projects, DFT specification, definition, architecture, and insertion.
Experience with DFT techniques and common industry tools, DFT and Physical Design flows, and DFT verification flow.
Experience in leading DFT activities throughout the whole ASIC development flow.
Preferred qualifications:
Master's degree in Electrical Engineering or a related field.
Experience in post-silicon Debug, test or product engineering.
Experience in Joint Test Action Group (JTAG) and Internal JTAG (iJTAG) protocols and architectures.
Experience in SoC cycles, silicon bring-up, and silicon debug activities.
Knowledge of fault modeling techniques.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8642024
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 6 שעות
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Required Senior Silicon Physical Design Engineer
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a SoC Physical Design Engineer, you will collaborate with functional design, Design for Testing (DFT), architecture, and packaging engineers. In this role, you will solve technical problems with innovative micro-architecture and practical logic circuits solutions, while evaluating design options with optimized performance, power, and area in mind.
The AI and Infrastructure team is redefining whats possible. We empower our customers with breakthrough capabilities and insights by delivering AI and Infrastructure at unparalleled scale, efficiency, reliability and velocity. Our customers include Googlers, Cloud customers, and billions of users worldwide.
We're the driving force behind our groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future. From software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for Cloud, Global Networking, Data Center operations, systems research, and much more.
Responsibilities
Use problem-solving and simulation techniques to ensure performance, power, and area (PPA) are within defined requirements.
Collaborate with cross-functional teams to debug failures or performance shortfalls and meet program goals in lab or simulation.
Design chips, chip-subsystems, or partitions within subsystems from synthesis through place and route, and sign off convergence, ensuring that the design meets the architecture goals of power, performance, and area.
Develop, validate, and improve Electronic Design Automation (EDA) methodology for a specialized sign off or implementation domain to enable cross-functional teams to build and deliver blocks that are correct by construction and ease convergence efforts.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
5 years of experience with System on a Chip (SoC) cycles.
Experience with advanced design, including clock/voltage domain crossing, DFT, and low power designs.
Experience in high-performance, high-frequency, and low-power designs.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering or Computer Science, with an emphasis on computer architecture.
Experience with scripting languages such as Perl, Python, or Tcl.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8641241
סגור
שירות זה פתוח ללקוחות VIP בלבד