דרושים » ייצור ותעשייה » Production Line Engineer

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 2 שעות
חברה חסויה
Job Type: Full Time and Hybrid work
The Product Line Leader Engineer is responsible for defining, maintaining, and continuously improving production processes to ensure quality, efficiency, and scalability. The role focuses on process ownership, implementation of engineering methodologies, and supporting stable production while enabling yield, cycle time, and cost improvements.

Key Responsibilities
Own and maintain production processes, process flows, and work instructions.
Define and implement production engineering methodologies to improve quality, yield, and efficiency.
Provide daily engineering support to production lines, including hands-on troubleshooting.
Lead root cause analysis for process-related issues and implement corrective and preventive actions.
Drive yield improvement, scrap reduction, and cycle time optimization initiatives.
Requirements:
Education Experience
BSc in Mechanical, Mechatronics Engineering, or related fields.
3-5+ years of experience as a Production Engineer, Process Engineer, or similar role in a manufacturing environment.

Production Engineering Methodologies
Strong knowledge and practical application of Lean Manufacturing principles.
Experience with Six Sigma tools and data -driven process improvement.
Hands-on use of SPC, control charts, and statistical analysis.
Experience performing PFMEA and defining control plans.
Familiarity with standard work, line balancing, and takt time concepts.
Experience with problem-solving methodologies such as 8D, 5W
Technical Skills
Ability to define and document production processes and specifications.
Strong root cause analysis and troubleshooting skills.
Experience with process validation and qualifications.
This position is open to all candidates.
 
Hide
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8908840
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Yokne'Am Illit
Job Type: Full Time
The Manufacturing Engineering function supports the development, transfer, and optimization of manufacturing processes for medical device products. The team partners closely with Operations, Quality, R&D, Supply Chain, and Production to implement scalable manufacturing solutions, improve process performance, and support business growth through operational excellence.
As a Senior Manufacturing Engineer, you will lead and support manufacturing process development, process improvements, equipment implementation, and production support activities. This role is responsible for driving manufacturing efficiency, product quality, and compliance while serving as a technical expert across cross-functional projects and operational initiatives. This position is based in Yokneam and follows an onsite work model.
Primary Responsibilities:
Lead the design, development, validation, and optimization of manufacturing processes and production methods.
Develop and implement manufacturing solutions that improve product quality, yield, throughput, and cost performance.
Design and optimize production layouts, equipment configurations, and material flow to maximize operational efficiency.
Evaluate manufacturing equipment performance, identify process gaps, and implement corrective and preventive actions.
Partner with R&D, Quality, and Operations teams to support product introductions, design transfers, and design-for-manufacturing initiatives.
Develop and maintain manufacturing documentation, work instructions, process specifications, and validation protocols.
Apply statistical process control and data analysis techniques to monitor and improve process capability.
Provide technical leadership, mentoring, and project support to manufacturing engineering teams and cross-functional stakeholders.
Requirements:
Bachelor's degree and 4+ years of manufacturing engineering experience OR Master's degree and 2+ years of manufacturing engineering experience.
Experience developing, validating, and improving manufacturing processes in a regulated industry.
Experience with process troubleshooting, root cause analysis, and corrective action implementation.
Experience with statistical analysis and Statistical Process Control (SPC) methodologies.
Knowledge of manufacturing equipment, process validation, and quality system requirements.
Preferred Qualifications:
Experience in the medical device, pharmaceutical, or other highly regulated manufacturing industry.
Experience supporting new product introduction (NPI), technology transfer, or process scale-up activities.
Knowledge of Lean Manufacturing, Six Sigma, and continuous improvement methodologies.
Experience leading cross-functional projects and influencing technical decisions.
Six Sigma Green Belt, Black Belt, or equivalent process improvement certification.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8862996
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Yokne'Am Illit
Job Type: Full Time
Join our engineering team as a Process Engineer and help drive meaningful improvements across our manufacturing operations. In this role, you will lead opportunities to enhance efficiency, quality, and safety while working closely with cross-functional teams to solve problems and optimize processes. This is an exciting opportunity for a motivated engineer who enjoys hands-on impact, continuous improvement, and contributing to a high-performing environment. If you are looking for a role where your ideas can make a real difference, we encourage you to apply.
This position is on-site working based at our company Yokneam. You will report to the engineering manager and collaborate regularly with teams across production, quality, maintenance, and operations. Some travel may be required to support other sites, project work, or training initiatives. The role offers the chance to work in a fast-paced environment with strong opportunities for learning, development, and career growth.
Primary Responsibilities
Responsible for all manufacturing processes on production floor, pFMEA, Equipment URS, Working instructions, test methods, Support production training, Define Packaging instructions; Ensures processes and procedures are following regulations; Monitors documentation maintenance throughout all phases of product lifecycle.
Project management skills, Responsible for timelines, Scop of work, Budget.
Implement jigs, fixtures, and other manufacturing support tools for medical device assembly and testing.
Improve manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling; Review arrangement of machines within plant facilities to ensure most efficient and productive layout.
Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
Support manufacturing processes that are applicable to statistical process control, and may develop those techniques; Issue specification requirements to best utilize equipment and manufacturing techniques.
Drives a continuous improvement mindset by engraining and improving the MPS (our company Performance System) methodologies in the day-to-day; Execute Improvement in Yokneam Operations KPIs (Yields, Scrap, Quality, Safety, OEE).
Acts as a partner with mainly production and Quality operations and other functions in Operations and R&D sustain team.
Requirements:
B.Sc. degree in Mechanical Engineering or another relevant manufacturing-focused engineering field.
Minimum of 3 years of experience in manufacturing engineering within the medical device, pharmaceutical, or process industries.
Written and verbal communication skills in English.
Strong problem-solving and execution abilities.
Proactive approach; Full responsibility for the delivery of outputs, including supporting documentation; a "Big-picture" mindset. including influence and communication skills.
Preferred Qualifications
Certifications such as Six Sigma/Green belt or Lead Auditor (ISO 13485).
Sold work skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8862971
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Yokne'Am Illit
Job Type: Full Time
The Engineering Technician is part of our company's Operations and Manufacturing function, supporting the production of medical devices used by healthcare providers and patients worldwide. The team partners with engineering and manufacturing groups to maintain equipment performance, support process improvements, and ensure reliable, high-quality production operations.
The Engineering Technician provides hands-on technical support for manufacturing equipment, production processes, and engineering initiatives. This role partners with engineers and operations teams to troubleshoot equipment issues, support process optimization activities, and help maintain safe, efficient, and compliant manufacturing operations.
This is a temporary (1-year contract), on-site position based in Yokneam.
Primary Responsibilities:
Provide technical support for manufacturing equipment, processes, and engineering projects.
Troubleshoot equipment, instrumentation, and process issues to minimize production downtime.
Monitor equipment performance and collect operational, calibration, inspection, testing, and repair data.
Perform technical investigations and resolve equipment malfunctions and process deviations.
Support process improvement initiatives focused on yield, cycle time, quality, safety, and cost.
Assist with implementation and sustainment of 5S and visual management activities.
Support workstation organization, material flow improvements, and workplace standardization.
Contribute to production line layout optimization and productivity improvement projects.
Requirements:
1+ years of technical experience in manufacturing, engineering support, or production operations.
Experience troubleshooting manufacturing equipment, instrumentation, or production processes.
Experience collecting, documenting, and analyzing equipment or process performance data.
Ability to read and follow technical procedures, work instructions, and documentation.
Proficiency in Microsoft Office applications.
Preferred Qualifications:
Experience in a regulated manufacturing environment such as medical device, pharmaceutical, or biotechnology industries.
Experience with Lean Manufacturing, 5S, or continuous improvement methodologies.
Knowledge of equipment calibration, preventive maintenance, and process control activities.
Experience supporting manufacturing process optimization and productivity improvement projects.
Familiarity with quality systems and compliance requirements within a manufacturing environment.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8863003
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
03/11/2026
Location: Yokne'Am Illit
Job Type: Full Time
we are committed to delivering exceptional solutions in a wide range of sectors, and we are looking for engineers who share our passion and dedication to making a difference in the world through their inventions. as a senior package engineer, you will work closely with si, layout, and asic design teams to develop complex, top-of-the-line asic packages. you will be responsible for planning schedules, resolving costs, packaging, manufacturing, and electrical design issues.
what you'll be doing:
lead adhesive and bonding process development for advanced fcbga packaging, including surface preparation, surface coatings and process optimization for applications requiring optical alignment and high dimensional stability.
design and execute design of experiments (doe) for adhesive material qualification, process window definition, and process optimization including failure analysis.
evaluate and qualify new materials (adhesives, encapsulants, underfills) from vendors including characterization of cure chemistry, thermal stability, and mechanical properties
define and own incoming material acceptance criteria and statistical process control (spc) thresholds for production readiness
collaborate with partners and material suppliers to resolve process escapes, drive 8d corrective actions, and align on specification requirements
prepare process documentation, assembly specs, and material qualification reports
monitor and analyze production data to identify process trends, drive yield improvements, and ensure ongoing process control across osat manufacturing sites.
Requirements:
b.sc. or m.sc. in materials science, chemical engineering, or a related field
7+ years of experience in process engineering, with hands-on expertise in adhesive process development.
proven experience with failure analysis techniques: cross-sectioning, SEM /edx, optical microscopy, dsc, tga, and ftir
willingness and ability to travel internationally approximately 30% of the time to support osat partners, supplier qualifications, and on-site failure investigations
ability to work independently in a fast-paced, multi-program environment
curious and creative problem solver as well as organized and multi-tasker
team oriented, able to move and motivate peers. strong interpersonal skills (verbal and written)
high awareness of quality, manufacturability and project schedule
ways to stand out of the crowd:
proven record in packaging development
background in semiconductor manufacturing processes and optical systems
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8882936
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Yokne'Am Illit
Job Type: Full Time
The Engineering Technician is part of our company's Operations and Manufacturing function, supporting the production of medical devices used by healthcare providers and patients worldwide. The team partners with engineering and manufacturing groups to maintain equipment performance, support process improvements, and ensure reliable, high-quality production operations.
The Engineering Technician provides hands-on technical support for manufacturing equipment, production processes, and engineering initiatives. This role partners with engineers and operations teams to troubleshoot equipment issues, support process optimization activities, and help maintain safe, efficient, and compliant manufacturing operations.
This is a temporary (1-year contract), on-site position based in Yokneam.
Primary Responsibilities:
Provide technical support for manufacturing equipment, processes, and engineering projects.
Troubleshoot equipment, instrumentation, and process issues to minimize production downtime.
Monitor equipment performance and collect operational, calibration, inspection, testing, and repair data.
Perform technical investigations and resolve equipment malfunctions and process deviations.
Support process improvement initiatives focused on yield, cycle time, quality, safety, and cost.
Assist with implementation and sustainment of 5S and visual management activities.
Support workstation organization, material flow improvements, and workplace standardization.
Contribute to production line layout optimization and productivity improvement projects.
Requirements:
Ability to read and follow technical procedures, work instructions, and documentation.
Knowledge of equipment calibration, preventive maintenance, and process control activities.
Proficiency in Microsoft Office applications.
Preferred Qualifications:
Experience in manufacturing, engineering support, or production operations in a regulated manufacturing environment such as medical device, pharmaceutical, or biotechnology industries.
Familiarity with Lean Manufacturing, 5S, or continuous improvement methodologies.
Familiarity with quality systems and compliance requirements within a manufacturing environment.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8863008
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Yokne'Am Illit
Job Type: Full Time
We are looking for an NPI Engineer for the R&D team. The NPI Engineer will own the end-to-end transition of multidisciplinary medical devices from R&D prototypes to stable, scalable serial production, serving as the bridge between product development and Operations.
If you want to work in an innovative, international environment and help push the boundaries of healthcare, well-being, and energy-based technology, this is your opportunity
Key responsibilities:
Lead the full NPI and design-transfer process from R&D handoff through pilot builds, qualification, production ramp-up, and stabilization.
Build and drive transfer plans, schedules, risk and action tracking, production-readiness criteria, and release gates.
Create and maintain the manufacturing package, including BOM/DMR content, drawings, work instructions, test methods, acceptance criteria, tooling, and training materials.
Lead DFM, DFA, and DFT reviews and drive design and process improvements that support quality, manufacturability, serviceability, and cost.
Define, develop, and qualify manufacturing processes, fixtures, equipment, and test setups; prepare and execute validation protocols where applicable.
Lead ECOs and configuration changes, and provide hands-on support for production, yield, quality, field, and obsolescence issues using structured root-cause and corrective-action methods.
Serve as the technical focal point across R&D, Operations, QA/RA, Supply Chain, Service, suppliers, subcontractors, and contract manufacturers.
Requirements:
B.Sc. in Mechanical, Electrical, Biomedical, Mechatronics, or a related engineering discipline.
At least 3 years of experience in NPI, manufacturing engineering, product engineering, or design transfer for multidisciplinary products.
Proven experience supporting pilot and serial production and developing or improving manufacturing processes.
Experience with engineering documentation, BOM/DMR structures, ECO/CO processes, and PLM/PDM and ERP systems.
Strong hands-on troubleshooting, root-cause analysis, and structured problem-solving skills.
Ability to read and interpret engineering drawings, specifications, and technical documentation; SolidWorks experience is preferred.
Fluent Hebrew and English, written and spoken; medical-device or other regulated-industry experience is an advantage.
Education & Experience - Relevant engineering degree and 3+ years of experience in multidisciplinary product industrialization.
Product & Business Acumen - Understands how design choices affect product quality, supply continuity, serviceability, cost, and time to market.
Execution & Leadership - Owns deliverables end to end, prioritizes effectively, and leads cross-functional actions without direct authority.
Communication & Collaboration - Builds strong working relationships and communicates status, risks, and decisions clearly across functions and sites.
Other Requirements - Comfortable working in a dynamic, global, matrix organization and providing hands-on support when needed.
Self-Starter & Problem-Solver - Proactive and resourceful; turns ambiguous technical issues into structured, evidence-based action plans.
Detail-Oriented & Analytical - Uses data, documentation discipline, and sound engineering judgment to ensure repeatable and compliant execution.
Technical Skills - Manufacturing documentation, DFM/DFA/DFT, ECO ad configuration control, RCA, process validation, PLM/PDM/ERP, and CAD/SolidWorks.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857513
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Haifa
Job Type: Full Time
The Advanced Manufacturing Engineer (AME) is responsible for industrializing and sustaining complex PET and SPECT imaging products at a high‑complexity electromechanical manufacturing site. The AME ensures robust manufacturability of high‑level mechanical assemblies, electronics integration, wiring, detector modules, motion systems, and system‑level testing. The role drives process development, tooling, validation, DFM/DFA, quality improvement, and readiness for production and NPIs.
NPI Leadership for PET & SPECT Imaging Systems
Lead manufacturing readiness for new PET/SPECT products, including process layout, tooling development, and new equipment introduction.
Participate in design reviews and influence DFM/DFA/DFT across mechanical assemblies, detector modules, power systems, wiring harnesses, and electromechanical subsystems.
Translate design intent into controlled, stable manufacturing processes.
Coordinate ECO implementation and ensure smooth manufacturing release.
Assembly Process Development & Optimization
Develop robust assembly processes for mechanical and electronic integration, alignment, torque control, and detector installation.
Define and design manufacturing jigs, tools, fixtures, and lifting/handling solutions required for large subsystems.
Lead design/manufacture of equipment, tooling, and jigs internally or via suppliers to eliminate defects.
Drive LEAN manufacturing implementation and support continuous improvement.
Conduct PFMEA for existing and new processes.
Quality & Problem Solving
Drive product quality improvements by identifying manufacturing issues and implementing cost‑effective solutions.
Work with Production Associates to resolve manufacturing and quality problems.
Oversee corrective action implementation in production or suppliers.
Support RCA through structured failure analysis.
System Integration & Testing Support
Support integration/testing of assembled PET/SPECT systems including calibration, alignment, motion validation, detector gain calibration, and safety checks.
Work with System Engineering to define test protocols and acceptance criteria.
Troubleshoot system issues related to electromechanical assemblies.
Validation & Regulatory Compliance
Own IQ/OQ/PQ for equipment, tools, and manufacturing processes.
Ensure compliance with ISO 13485, ISO 14971, 21 CFR 820, IEC 60601, and internal QMS requirements.
Maintain strong documentation practices including control plans, validation protocols, and DHR/DMR accuracy.
Ensure traceability for critical parameters, torques, and calibration data.
Supplier & Cross‑Functional Collaboration
Collaborate with suppliers of mechanical assemblies, detector modules, wiring harnesses, and PCBs.
Lead technical discussions with suppliers for tooling, process capability, and quality issues.
Train and qualify production and supplier teams on processes and inspection/assembly methods.
EHS & Plant Compliance
Lead and support Environment, Health & Safety efforts aligned with site goals.
Ensure safe handling of large assemblies, HV systems, and radiation‑related components.
דרישות:
Drive product quality improvements through systematic problem solving.
Lead design requirements for manufacturing processes, tools, and fixtures.
Design and manufacture jigs, fixtures, and tooling (internal or supplier‑managed).
Strong experience with LEAN manufacturing and PFMEA execution.
Ability to resolve complex manufacturing and quality issues.
Leadership of NPI activities including tool development and equipment introduction.
ECO coordination and controlled release management.
Strong understanding of compliance, EHS, and regulated manufacturing.
Ability to train and qualify production and supplier teams.
Mechanical/electromechanical assembly expertise.
Experience with HV/LV wiring, detector systems, and motion integration.#ENGLISH המשרה מיועדת לנשים ולגברים כאחד.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857553
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Caesarea
Job Type: Full Time
Join our company as a Mechanical Engineering Manager, play a key role in the design and development of innovative mechanical and electromechanical medical products and systems across Research and Technology (R&T), New Product Development (NPD), and Released Product Engineering (RPE). You will lead and develop a team of experienced Mechanical Engineers responsible for the R&D efforts within Cranial and Spinal Technologies Platform/Solutions organization. You will provide both people and technical leadership throughout the product lifecycle, from early concepts and feasibility through detailed design, verification, design transfer, production support, and post-market product improvements. The team operates in a highly regulated environment and is responsible for delivering safe, reliable, and high-quality mechanical and electromechanical solutions in accordance with applicable medical device development processes and Quality System requirements.
You will work in a global matrixed organization and collaborate regularly with colleagues, managers, technical experts, and cross-functional stakeholders across international sites. The role is responsible for directing professional employees, managing engineering functions, and driving business objectives. The role is primarily performed on-site in Caesarea due to the hands-on, hardware-oriented nature of the work.
Primary Responsibilities:
Lead, coach, and develop a team of Mechanical Engineers, including goal setting, performance management, regular one-on-one meetings, and career development.
Plan, prioritize, and direct mechanical engineering activities across sustaining engineering, platform improvements, and new product development.
Provide technical leadership for the development of complex mechanical and electromechanical medical devices from concept through verification, design transfer, and production readiness.
Ensure engineering activities and documentation comply with Design Control, Quality System requirements, internal procedures, and applicable medical device regulations.
Lead technical investigations, root-cause analysis, corrective actions, and improvements related to released products and production.
Manage resources and priorities across multiple projects while supporting program schedules, product quality, and business objectives.
Collaborate with global and cross-functional partners, including Systems, Electrical, Software, Manufacturing, Quality, Regulatory, Service, and Program Management.
Coordinate activities with suppliers, consultants, and manufacturing partners to support development, production, and timely delivery.
דרישות:
Bachelors degree in Mechanical Engineering or an equivalent engineering discipline with a minimum of 5 years of relevant experience, or an advanced degree with a minimum of 3 years of relevant experience.
Proven people-management experience leading a mechanical development team within an R&D organization, including responsibility for performance management, employee development, work prioritization, and delivery.
Strong experience developing mechanical and electromechanical products, including mechanisms, precision assemblies, and complex systems.
Experience supporting products across multiple lifecycle stages, including new product development, design transfer, sustaining engineering, and released-product support.
Strong knowledge of mechanical design, engineering drawings, GD&T, tolerance analysis, and design for manufacturability and assembly.
Excellent English communication skills and the ability to work effectively in a cross-functional and matrixed organization.
Preferred Qualifications:
People-management experience in the medical device industry and/or within a global organization.
Experience with Design Control, verification and validation, risk management, and regulated product-development processes.
Experience with robotic systems, surgical platforms, capital equipment, or complex electromechanical syst המשרה מיועדת לנשים ולגברים כאחד.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8862960
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Caesarea
Job Type: Full Time
meet the team
our silicon team creates innovative hardware platforms central to the ai era, powering the company's core switching, routing, and wireless products for organizations globally. our innovations in silicon, optics, and hardware platforms are shaping the technology industry. we're a global team of creative experts, bringing our unique backgrounds and bold ideas to push boundaries and help each other grow. because full product development-from design to qualification to production-is within our team, we're able to think differently, experiment more, and work quickly. join us to power the future of the digital world.
your impact
are you passionate about guiding high-complexity ai hardware from initial prototype build to full-scale production? as a t2p (transfer to production) engineer, you will orchestrate the transfer of hardware designs from engineering development to volume manufacturing across evbs, characterization platforms, and system boards. lead design data and documentation in agile plm, maintain revision and change records, and serve as the focal point for design, engineering, manufacturing, and supply chain teams.
you will oversee complete post-fab design packages, drive engineering change orders (ecos), ensure configuration traceability across schematics, boms, and odb++/gerber, drawings, stack-ups, work instructions (wi), paste files, release packages, and partner closely with electrical, pcb cad, mechanical, quality, and contract manufacturing partners to streamline production readiness.
enjoy the speed and creative ownership of a startup with the scale and benefits of a global tech giant-join our growing silicon team right next to the caesarea train station!
why us?
at the company, were revolutionizing how data and infrastructure connect and protect organizations in the ai era - and beyond. weve been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. these solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint.
fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. add to that our worldwide network of doers and experts, and youll see that the opportunities to grow and build are limitless. we work as a team, collaborating with empathy to make really big things happen on a global scale. because our solutions are everywhere, our impact is everywhere.
our power starts with you.
Requirements:
b.sc. in engineering or a related technical field, or equivalent practical experience.
3+ years of experience in hardware engineering operations, npi, product data management, configuration management, or transfer to production.
experience leading engineering changes (ecos), and revision control for electronic hardware.
experience working with plm systems, such as agile plm.
preferred qualifications
understanding of pcb design and manufacturing work, including schematics, boms, and odb++/gerber, drawings, stack-ups, work instructions (wi), paste files, release packages.
experience supporting evb, networking, switching, routing, or server hardware programs.
experience with agile plm workflows, item management, change orders, and document control.
knowledge of dfm and dfa practices and manufacturing readiness reviews.
experience building or improving hardware release, configuration management, and traceability processes.
experience coordinating across multi-functional engineering, manufacturing, and supply chain teams.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8904222
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Haifa
Job Type: Full Time
We are seeking an experienced and self-driven Senior Mechanical Engineer to join our Ultrasound Point of Care (POC) R&D team. In this role, you will be responsible for leading the mechanical design, development, verification, and transition to manufacturing (NPI) of compact ultrasound systems, consoles, and system accessories.
This position emphasizes complete end-to-end mechanical ownership-from initial conceptual design, detailed CAD modeling, and DFM to collaborating with external subcontractors, managing tooling approvals, and ensuring seamless integration on the manufacturing line.
Job Description
Key Responsibilities
Mechanical Design & Engineering: Drive the mechanical design and electronics packaging of compact ultrasound hardware, consoles, suspended masses, sheet metal structures, and custom system accessories from initial concept through mass production.
Subcontractor & Vendor Collaboration: Collaborate with external subcontractors, injection molding suppliers, tooling vendors, and design agencies (including overseas suppliers in China and globally) to ensure design feasibility and quality.
DFM & Production Readiness: Oversee Design for Manufacturability (DFM) reviews, tool design approvals, sample inspections, and root-cause analysis for plastic injection parts, metal forming, castings, and extrusions.
Design Control & Documentation: Author and maintain technical documentation, including System/Mechanical Requirements Specifications (DRS), Verification Protocols (VPR, VRS), Engineering Change Requests/Orders (ECR/ECO), assembly drawings, and Bill of Materials (BOM).
Compliance & Standards: Ensure mechanical design compliance with medical device standards, cleaning & disinfection guidelines (ISO 17664), system labeling, and environmental/regulatory requirements.
Testing & Assembly Line Support: Design test fixtures, write verification plans, execute mechanical testing, and provide real-time engineering support to assembly floors and production lines.
Requirements:
Experience: 8+ years of hands-on mechanical engineering design experience for multidisciplinary electro-mechanical systems or medical devices.
Subcontractor Collaboration: Proven track record of working closely with external subcontractors, design partners, industrial designers, and overseas manufacturing plants.
3D CAD Mastery: Advanced proficiency in SolidWorks (including plastic enclosures, surfacing, sheet metal, and complex structural assemblies).
Manufacturing Processes: Deep practical knowledge of plastic injection molding, tooling approvals, sheet metal fabrication, machining, metal finishes/coatings, extrusions, and ultrasonic welding.
Medical Compliance & Quality: Experience working in a regulated engineering environment under ISO 13485 design controls, ISO 17664 (cleaning & disinfection), and regulatory labeling requirements.
PLM & ERP Tools: Proficiency with PLM/PDM systems (e.g., ENOVIA, SolidWorks PDM) and ERP systems (e.g., SAP).
Soft Skills & Capabilities
Problem Solving: Strong problem-solving skills, methodical troubleshooting, and the ability to make independent technical decisions under pressure.
Communication & Collaboration: Excellent communication and collaboration skills when working with cross-functional teams, external vendors, and global suppliers.
Adaptability: Ability to work effectively under pressure and adapt to dynamic project timelines.
Education & Languages
Education: B.Sc. in Mechanical Engineering from an accredited university.
Languages: Professional working proficiency in English and Hebrew.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8857575
סגור
שירות זה פתוח ללקוחות VIP בלבד