דרושים » חשמל ואלקטרוניקה » Hardware /Board Design Engineer - Power, Control Sensors

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 10 שעות
Job Type: Full Time and Hybrid work
Were looking for a mid-level or senior Hardware Engineer to own custom electronics across our robotics platform, with a strong emphasis on motor-drive and power electronics alongside Embedded control, sensor interfaces, and communication boards.
Youll take projects from requirements and architecture through circuit design, PCB implementation, bring-up, validation, and production transfer.
PCB layout is currently supported by external partners.
Youll define the constraints, guide implementation, review the results, and remain accountable for the complete board design.
We welcome engineers who use AI-assisted design and verification tools effectively while applying sound electrical judgment and measurement-based validation.
Requirements:
relevant hardware-development experience, including independent ownership of boards through bring-up and validation.
B.Sc. in Electrical/Electronics Engineering or equivalent proven practical experience.
Strong foundations in analog, digital, mixed-signal, and power circuit design.
Proven experience with motor-drive or power-electronics circuits, including switching stages, gate drivers, sensing, and protection.
Experience with microcontroller-based systems, sensor interfaces, and digital communication circuits.
Ability to define and review multilayer PCB implementation, including high-current paths, grounding, thermal management, controlled impedance where needed, and EMI/EMC considerations.
Proficiency with schematic and PCB design tools; Altium Designer preferred but any CAD is sufficient.
Strong hands-on debugging skills using oscilloscopes, differential a
This position is open to all candidates.
 
Hide
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8908821
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
דרושים בSpecial Job – חברת השמה בהייטק
Job Type: More than one
- Electronics Board & System Design: Own schematic design and component selection for all proprietary boards.
Design system-level wiring architecture and detailed technical drawings.
- Embedded Firmware Development: Write and architect low-level C/C++ firmware infrastructure
to control and interface sensors, multi-axis motors, high-precision components and lasers subsystems with the software.
- Hands-on Board Bring-Up, QC & Troubleshooting: Act as the primary lab problem solver for board debugging,
rework, and failure analysis. Establish QC procedures for newly received boards to support production.
- DFM & Cost Optimization: Apply strict Design for Manufacturability (DFM) principles to optimize PCB layouts,
streamline assembly, and aggressively reduce production and bill-of-materials (BOM) costs.
- PCB Layout Management: Drive physical board layout design,
Requirements:
- Education: B.Sc. in Electrical Engineering with at least 5 years of experience
- Hardware & Layout Expertise: 3+ years of experience in board design (mixed-signal, power management, microcontrollers)
and PCB layout tools (e.g., Altium, OrCAD, KiCad).
- Embedded Firmware Skills: Strong C/C++ programming skills for microcontrollers (STM32, ARM Cortex, etc.)
and deep familiarity with hardware protocols (SPI, I2C, UART, CAN, USB).
- Hands-on Capability: Excellent lab skills (soldering, prototyping, oscilloscope diagnostics)
and a natural problem-solving mindset.
- Proven DFM Focus: Demonstrated experience implementing DFM practices specifically targeted at price reduction,
cost optimization, and yield improvement in production.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8836880
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Herzliya
Job Type: Full Time
Were looking for a mid-level or senior hardware engineer to own custom electronics across our humanoid platform, with a strong emphasis on motor-drive and power electronics alongside embedded control, sensor interfaces, and communication boards. Youll take projects from requirements and architecture through circuit design, PCB implementation, bring-up, validation, and production transfer. PCB layout is currently supported by external partners. Youll define the constraints, guide implementation, review the results, and remain accountable for the complete board design. We welcome engineers who use AI-assisted design and verification tools effectively while applying sound electrical judgment and measurement-based validation.
What will your job look like:
Own board requirements, architecture, circuit design, component selection, and schematic capture across multiple projects.
Design motor-drive electronics, gate-driver circuits, current sensing, protection, DC-DC conversion, and power distribution.
Develop MCU-based control boards, sensor interfaces, and mixed-signal circuits.
Design communication interfaces such as EtherCAT, Ethernet, CAN/FDCAN, RS-485, SPI, I²C, UART, and USB as required.
Define PCB stack-ups, placement and routing constraints, grounding, thermal requirements, and signal- and power-integrity considerations.
Guide external PCB layout partners and review placement, routing, manufacturin
Requirements:
4+ years of relevant hardware-development experience, including independent ownership of boards through bring-up and validation.
B.Sc. in Electrical/Electronics Engineering or equivalent proven practical experience.
Strong foundations in analog, digital, mixed-signal, and power circuit design.
Proven experience with motor-drive or power-electronics circuits, including switching stages, gate drivers, sensing, and protection.
Experience with microcontroller-based systems, sensor interfaces, and digital communication circuits.
Ability to define and review multilayer PCB implementation, including high-current paths, grounding, thermal management, controlled impedance where needed, and EMI/EMC considerations.
Proficiency with schematic and PCB design tools; Altium Designer preferred but any CAD is sufficient.
Strong hands-on debugging skills using oscilloscopes, differential and current probes, multimeters, and other relevant lab equipment.
Ability to coordinate external design partners, manage concurrent projects, and maintain clear engineering documentation.
Nice to have:

Experience with compact BLDC/PMSM motor controllers and actuator electronics.
Precision current sensing, encoder interfaces, and low-noise analog design.
EtherCAT, Ethernet, and CAN/FDCAN hardware integration.
Advanced high-speed digital design, HDI, flex, or rigid-flex boards.
Circuit simulation, thermal analysis, and signal- or power-integrity analysis.
Experience with manufacturing test, EMC validation, component lifecycle management, and production transfer.
Effective use of AI tools for design review, analysis, verification, and engineering automation.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8902823
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
11/10/2026
חברה חסויה
Location: Netanya
Job Type: Full Time
Join our company as a Hardware Board Design Engineer, where you will contribute to complex design projects and the development of cutting-edge communication systems. In this role, you will design high-performance boards for advanced avionics systems, working as part of a professional hardware design team. Your expertise will drive innovation and ensure the highest standards of quality in our products.
Responsibilites
End to end boards design.
Starting from the component's selection and evaluation, schematic design, thermal considerations, mechanical constraints.
Layout design, production supervision, bring-up on lab.
Including all the relevant document writing and conducting the design reviews needed until the product is finished.
Leading products from the definition until their release.
Supporting production when needed.
Requirements:
Education:
BSc/MSc in Electrical/Electronics-Engineering from a known institute.
Experience and skills:
Electronics Engineer. 3+ years of board design. Proven experience in complex work with multilayer boards.
Knowledge and experience with digital circuits and interfaces, Memories interfaces, Microprocessors, DSP.
Knowledge and experience with analog circuits, DC/DC, ADC, amplifiers.
High knowledge of Layout design considerations, power planes, critical circuits, noise filtering, and crosstalk avoidance techniques.
Experience in circuit trouble shooting and bring-up working together with SW teams.
Modeling and simulation experience.
Understanding of EMI / EMC concepts.
Ability to understand product requirements and industry standards demands.
Ability to write specification documents, technical reports, design verification documents.
Good knowledge of Schematic design tools (Orcad preferred, not exclusive), very good handling of Office environment; Wide knowledge of lab equipment.
Personal Requirements:
Excellent teamwork skills and ability to interface with various levels of technicians, engineers, suppliers and manufacturing.
Ability to work under pressure with high sense of responsibility and strong commitment to due dates.
Highly organized, able to work independently with limited supervision, including working with and supervising external subcontractors (mechanical, layout designers).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8851746
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
02/11/2026
Location: Herzliya
Job Type: Full Time
Required Hardware Design Engineer (Board Design)
Description:
We are a global leader in the development of advanced airborne defense, intelligence, and surveillance solutions for military, governmental, and commercial aviation.
Our innovative technologies are deployed worldwide, supporting mission-critical operations and protecting aircraft through advanced multidisciplinary systems.
As we continue to grow, we are looking for a talented Hardware Design Engineer (Board Design) to join our Hardware Development team and contribute to the design and development of advanced electronic boards for complex aerospace and defense systems.
What Youll Do:
Design, develop, and modify electronic boards throughout the entire product lifecycle.
Perform board bring-up activities following development and initial manufacturing.
Troubleshoot hardware issues, analyze failures, and implement design improvements.
Edit schematics and support PCB layout activities.
Improve product manufacturability and maintain production documentation.
Support PCB manufacturers and electronic assembly subcontractors while ensuring compliance with IPC standards.
Investigate manufacturing failures and provide engineering solutions.
Work closely with multidisciplinary teams including Mechanical, Software, Firmware, and System Engineering.
Participate in design reviews (PDR/CDR).
Prepare engineering documentation, test procedures, and product verification documents.
Support the transition from development to production.
Requirements:
B.Sc. in Electrical Engineering / Electronics Engineering - Mandatory.
Up to 5 years of professional experience in Hardware Design Engineering (excluding mandatory military service).
Proven experience in analog board design and high-power power supply design - Mandatory.
Hands-on experience performing board bring-up for digital boards and power supply boards - Mandatory.
Experience with schematic editing and PCB layout support - Mandatory.
Experience preparing and participating in design reviews (PDR/CDR) - Mandatory.
Experience writing ATP and POD documentation - Mandatory.
Experience supporting PCB manufacturing and electronic board assembly.
Strong proficiency with OrCAD and Allegro.
Excellent Microsoft Office skills.
Fluent Hebrew and English.
Nice to Have:
Experience in the aerospace and defense industry.
Experience working with complex multidisciplinary systems.
Familiarity with IPC standards and production processes.
Strong understanding of development in compliance with MIL-STD and DO-160 testing standards.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8881376
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
4 ימים
חברה חסויה
Location: Netanya
Job Type: Full Time
DRS RADA is a global pioneer of RADAR systems for active military protection, counter-drone applications, critical infrastructure protection, and border surveillance. We are looking for Senior ATE Software Engineer As a Software Automatic Test Equipment Engineer, you will design, develop, integrate, and validate automated test equipment for electronic assemblies and radar systems. Own the ATE lifecycle from requirements and architecture through detailed design, qualification, and production handover. Key Responsibilities Define ATE hardware requirements, architecture, and equipment specifications. Design test fixtures, interface boards, switching circuits, cable assemblies, and rack-level interconnections. Select and integrate measurement instruments, power supplies, DAQ modules, and control equipment. Prepare schematics, wiring diagrams, interface definitions, BOMs, and manufacturing documentation. Lead hardware bring-up, integration, debugging, and design verification. Develop Python and LabVIEW tools for instrument control, hardware validation, and automated measurements. Define and execute acceptance tests, station correlation, and measurement-repeatability checks. Investigate test-system failures and implement corrective actions. Support production deployment, maintenance documentation, and engineering changes. Coordinate hardware interfaces with software, system engineering, mechanical engineering, and production teams.
Requirements:
Mandatory B.Sc. in Electrical or Electronics Engineering. 10+ years of hands-on experience in ATE hardware development , test-equipment design, or multidisciplinary electronic-system development. Strong understanding of measurement techniques, grounding, shielding, signal integrity, and electrical protection. Hands-on experience integrating laboratory instruments and troubleshooting electronic hardware. Python: mandatory hands-on experience in instrument control, test automation, and measurement-data processing. LabVIEW: mandatory hands-on experience in developing, modifying, and debugging hardware-control and test applications. Experience with communication interfaces such as Ethernet, USB, serial, SPI, and I²C. Ability to independently lead development from requirements through validated hardware delivery. Strong technical documentation skills and technical English. Advantages RF and radar test-system experience. Proven experience designing analog/digital circuits, interface boards, and test fixtures. Experience with schematic-capture tools and supporting PCB layout, fabrication, assembly, and bring-up. Experience with RF switching, attenuation, power measurements, and calibration. Experience with NI hardware, DAQ, PXI, and NI-VISA. Experience designing test racks, chamber interfaces, interlocks, and safety circuits. Familiarity with ATP/ATR, Golden Units, station correlation, and Gauge R&R. Experience with configuration management, PLM, Git, and controlled engineering releases. Experience supporting manufacturing and improving test-system reliability and maintainability.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8899158
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Petah Tikva
Job Type: Full Time
we are a leading company specializing in the development and manufacturing of autonomous drone systems. Its solutions combine hardware, software, and AI-driven technologies to support complex, large-scale operations. our company works primarily with defense industries, such as military and law enforcement agencies worldwide. The company is part of Ondas Holdings and operates as a wholly owned subsidiary.
In this role, you will be part of the electronics engineering team responsible for leading projects end-to-end, including electronics design, drafting, design verification testing, collaboration with internal departments, external suppliers, and supporting development and production phases
Responsibilities
Planning, executing, and documenting verification & validation (V&V) tests for electronic circuits, assemblies, and multidisciplinary systems
Performing functional, electrical, environmental, and integration tests for airborne and ground electronic systems
Preparing, executing, and documenting ATP (Acceptance Test Procedure) and validation test documents
Operating laboratory equipment such as oscilloscopes, spectrum analyzers, signal generators, power supplies, multimeters, and data acquisition systems
Performing hands-on debugging and troubleshooting of electronic boards, communication interfaces, cables, and system-level failures
Supporting integration, bring-up, and verification activities throughout development and production stages
Writing detailed test reports, validation summaries, failure analyses, and technical documentation
Working closely with hardware, firmware, system engineering, integration, manufacturing, and production teams
Supporting qualification, acceptance, and reliability testing processes מול customers, subcontractors, and internal teams
Managing laboratory activities, maintaining test setups, and supporting calibration and organization of lab equipment
Solving technical and system-level challenges under tight schedules and multidisciplinary constraints.
Requirements:
Practical Engineer / B.Sc. in Electrical / Electronics Engineering from a recognized institution
5 years experience in electronic testing, validation, integration, or hardware verification
Hands-on experience with laboratory and electronic test equipment
Strong technical orientation and troubleshooting capabilities
Understanding of analog and digital electronic circuits
Ability to read schematics, wiring diagrams, and technical documentation
Ability to work independently and manage multiple tasks in parallel
Strong teamwork skills, interpersonal communication, organizational abilities, self-learning skills, and the ability to work under pressure
Advantages
Experience with airborne systems, drones, robotics, or multidisciplinary systems
Familiarity with environmental and qualification tests (EMI/EMC, vibration, thermal, etc.)
Experience with automated test systems and scripting tools (Python / LabVIEW / MATLAB)
Experience in production support and work with subcontractors
Experience with RF systems and communication equipment
Familiarity with communication protocols such as UART, SPI, I2C, CAN, and Ethernet
Experience writing and executing ATPs, test procedures, and technical reports.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8860739
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Rehovot
Job Type: Full Time
The Electronics Team is looking for an Electrical & Electronics tech Lead to support the development of next-generation metrology systems for semiconductor manufacturing. In this role, you will become an integral part of our R&D organization, contributing to the design, development, integration, and validation of advanced electrical and electronic systems used in ultra-high precision OCD metrology platforms.
Responsibilities
What will you be doing:
Design and develop analog, digital, mixed-signal, and electrical (AC/DC) subsystems for complex multidisciplinary products.
Design electronic boards and participate in schematic reviews, component selection, integration, validation, and production release activities.
Develop embedded firmware and engineering software tools for control, monitoring, automation, testing, and data acquisition applications.
Lead electrical integration activities from prototype phase through manufacturing transfer and product lifecycle support.
Prepare engineering documentation including specifications, schematics, wiring diagrams, test procedures, and design reports.
Participate in product specification reviews, architecture discussions, and multidisciplinary design reviews.
Collaborate with and lead external suppliers and manufacturers throughout development, qualification, and production activities.
Conduct hands-on laboratory testing, debugging, troubleshooting, root-cause investigations, and data analysis.
Lead technical development projects from initiation through successful delivery including supplier management.
Requirements:
B.Sc. in Electrical Engineering from a recognized academic institution.
At least 7 years of hands-on R&D experience in the development of electrical and electronic systems for multidisciplinary products.
Experience in analog and digital electronics design, development, integration, and troubleshooting.
Experience in electrical system design and integration, including AC and DC systems up to 220VAC.
Proven coding capabilities in C, C++, LabVIEW or Python, or equivalent engineering development environments.
Experience with embedded firmware development and debugging.
Knowledge of ECO, NCR, CAPA, and Failure Analysis processes.
Knowledge of electrical and electronic safety requirements and certification processes.
Demonstrated ability to leverage AI-based engineering tools to accelerate development, debugging, documentation, research, and problem solving.
Excellent verbal and written communication skills in Hebrew and English.
Advantages:
Experience in semiconductor equipment, medical devices, defense systems, printing systems, or other multidisciplinary high-tech industries.
Experience with FPGA development using VHDL or Verilog.
Familiarity with SEMI standards.
Experience working with systems that integrate optics, electronics, mechanics, and software.
Experience with sensors, cameras, motion-control systems, precision analog measurements, and data acquisition platforms.
Experience leading development activities involving global suppliers and contract manufacturers.
Experience leading technical projects from concept through implementation.
That special something you bring in:
Strong self-learning capabilities and ability to quickly master new technologies.
Ability to work independently and take ownership of complex technical challenges.
Strong troubleshooting and analytical problem-solving skills.
Team-player mindset with high motivation and accountability.
Problem solver, "can do" approach, never afraid of challenges.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8866742
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Petah Tikva
Job Type: Full Time
We are looking for an experienced Hardware Design Engineer with a strong background in high-speed board design to join our Radar HW Group. Our Radar organization develops automotive radar systems that enable advanced driver assistance and fully autonomous driving.
The Radar HW Group has multidisciplinary responsibilities and owns the end-to-end development of all radar hardware. This includes: RF and high-speed digital boards, IC packages, Mechanical solutions & Antenna design.
What will your job look like:
Design high-speed boards from concept to production.
Own all design stages: architecture, schematics, layout, modeling, and design reviews.
Work on boards that include high-speed SERDES, LPDDR5/4, power circuits, and additional digital interfaces.
Collaborate closely with RF, mechanical and system teams.
Requirements:
B.Sc. in Electrical Engineering.
10+ years of experience in high-speed board design.
Hands-on experience with OrCAD and Allegro.
Strong understanding of high-speed digital design and power integrity concepts.
Experience with SI/PI modeling and simulation tools, such as HyperLynx, Sigrity, or Siwave.
Experience in developing automotive electronic products, including familiarity with qualification and reliability requirements - advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8902734
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 10 שעות
Job Type: Full Time
the complexity of the chip has greatly increased over the years. we are now packing tens of billions of transistors in a chip to meet the growing computing demand in a footprint that is responsible to our environment. the company system -on-chip ( SOC ) group is looking for a top asic engineer with a curiosity about SOC design automation, rtl integration, chip build and assembly, and i/o integration and verification. you should have real passion for methodologies and automation solutions that enable SOC creation in the most optimized way.
we are seeking a senior asic low-power integration & AI Engineer to own upf development, implement low-power design policies, and drive full-chip sign-off using synopsys vc lp. you will translate power architecture requirements into consistent, verifiable power intent across ip, subsystem, and full-chip designs. working closely with architecture, rtl, synthesis, physical design, and verification teams, you will drive low-power implementation and closure from rtl integration through tape-out readiness. alongside this engineering ownership, you will implement and supervise agentic ai workflows that improve upf development, violation analysis, and sign-off execution.
what youll be doing:
own upf development and integration: author, maintain, and debug hierarchical upf describing power domains, supply networks, power states, and low-power strategies. integrate ip-level power intent into a consistent full-chip power specification.
drive vc lp sign-off: establish and implement static low-power checking flows at rtl. own run readiness, check coverage, violation tracking, and closure criteria across block and full-chip designs.
resolve implementation issues: trace violations to upf, rtl, library models, or netlist connectivity. drive fixes for missing or incorrect low-power cells, supply connectivity errors, inconsistent power states, and integration mismatches.
build agentic low-power workflows: develop ai agents that assist with upf authoring and review, launch vc lp runs, analyze reports, identify related violations, propose corrective actions, and track closure.
supervise and improve agent performance: validate generated changes against power architecture and tool results. define review checkpoints and evaluate diagnostic accuracy, reproducibility, and reductions in debug effort.
coordinate technical closure: communicate readiness and risks, resolve cross-team dependencies, and improve reusable low-power integration methodologies.
Requirements:
what we need to see:
b.sc. or m.sc. in electrical engineering, computer engineering, or a related discipline, or equivalent practical experience.
5+ years of experience in asic/ SOC design, integration, or verification, including substantial hands-on responsibility for low-power design and sign-off.
strong expertise in ieee 1801 upf and hands-on experience with synopsys vc lp, including violation analysis, debugging, and closure at block or full-chip level.
a solid understanding of low-power implementation techniques, including power gating, isolation, retention, level shifting, and always-on logic.
proficiency in verilog/systemverilog and the ability to debug interactions between rtl, power intent, and implementation.
strong Python and tcl programming skills, with experience building and maintaining eda automation in Linux and version-controlled environments.
practical experience developing llm-based agents or tool-connected ai workflows, including integrating engineering tools and evaluating generated outputs.
strong analytical skills, technical ownership, and the ability to collaborate across engineering teams to resolve complex issues and meet milestone sign-off criteria.
the company has some of the most forward-thinking and hardworking people in the world working for us and, due to unprecedented growth, our world-class engineering teams are growing fast. if you're a creative and autonomous engineer.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8908752
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
23/10/2026
חברה חסויה
Location: Herzliya
Job Type: Full Time
Power the Future with us! At SolarEdge (NASDAQ: SEDG), we're a global leader in smart energy technology, with over 3,000 employees, offices in 34 countries, and millions of installations worldwide. Our innovative solutions include solar inverters, battery storage, backup systems, EV charging, and AI-based energy management. We're committed to making clean, green energy the primary power source for homes, businesses, and beyond. With the growing demand for electricity, the need for smart, clean energy sources is constantly rising. SolarEdge offers amazing opportunities to develop your skills in a multidisciplinary environment, covering everything from research and development to production and customer supply. Work with talented colleagues, tackle exciting challenges, and help create a sustainable future in an industry that's always evolving and innovating. Join us and be part of a company that values creativity, agility, and impactful work. As a Hardware Team Leader , you'll lead a team of hardware engineers developing the analog and communication circuits at the heart of SolarEdge's solar inverters and optimizers. You'll guide designs through the entire R&D lifecycle - from concept and feasibility studies through simulation, schematic design, and lab verification, all the way to mass production. This is a hands-on leadership role where you'll set the technical standards for the team, mentor engineers in their day-to-day work, and collaborate closely with software, system, mechanical, and production teams to bring robust, high-quality products to market. It's an excellent opportunity for someone who wants to remain deeply involved in analog engineering while developing a team and shaping our hardware design processes. What will you be doing? Lead, mentor, and manage a team of hardware engineers specializing in analog circuit design, simulation, and testing. Research, design, and develop analog and communication circuits, from initial requirements through to mass production. Perform lab characterization and verification of analog circuits using spectrum analyzers, oscilloscopes, and other laboratory equipment. Lead design reviews and serve as the technical authority for the team's area of expertise. Collaborate with software, system, mechanical, and production teams to ensure seamless hardware-software integration and a smooth transition to manufacturing. Manage technical scope, schedules, risks, and product quality across the team's projects.

Country:
Israel

City:
Ramat Hasharon
Requirements:
B.Sc. in Electrical Engineering. 5+ years of experience in discrete analog circuit and PCB design. Experience in people management or team leadership, or senior engineering experience with a track record of technical leadership and mentoring. Proven hands-on experience with laboratory equipment, including spectrum analyzers, oscilloscopes, power supplies, and electronic loads. Strong background in analog circuit design, including passive and active filters and op-amp topologies. Experience with PCB layout - an advantage Knowledge of PSpice or LTspice simulation tools - an advantage. Expertise in RF, communications, or power electronics - an advantage. Python programming skills - an advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8682748
סגור
שירות זה פתוח ללקוחות VIP בלבד