דרושים » הנדסה » NPI /Sustain Mechanical Engineer

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: More than one
Job Type: Full Time
The NPI/Sustain Mechanical Engineer will lead the transition of new multi-disciplinary products from design to mass production, bridging the gap between R D and manufacturing by ensuring products are manufacturable, cost-effective, and meet quality standards. The role includes sustaining engineering activities such as troubleshooting field issues, implementing design improvements, and supporting continuous product/process optimization. The engineer collaborates cross-functionally with design, production, quality, and supply chain teams to support product development, prototyping, process validation, ramp-up to full production and continuous process improvement.
Requirements:
B.Sc. or higher in Mechanical/Material Engineering or a related field
Fluent English
3-5 years of experience in new product introduction, product development, or manufacturing engineering, preferably in the medical device industry.
Hands-on experience with SolidWorks for mechanical design.
Familiarity with product lifecycle management (PLM) tools and processes.
Strong understanding of materials, manufacturing processes, and product testing methodologies.
Proficiency in design for manufacturability (DFM) and design for assembly (DFA).
Ability to perform root cause analysis and solve complex mechanical problems.
Excellent communication skills, both written and verbal.
Ability to work effectively in cross-functional teams and manage multiple projects simultaneously.
This position is open to all candidates.
 
Hide
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8908757
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: More than one
Job Type: Full Time
As a Design Verification Validation (V V) Engineer, you will be an integral part of the design control process, working alongside a collaborative, multi-disciplinary team of software, electrical, mechanical, control, and systems engineers. You will be responsible for planning, executing, and documenting V V activities for complex electro-medical systems, ensuring compliance, performance, and safety across all phases of development. This is a hands-on role requiring technical depth, systems-level perspective, and cross-functional coordination.
Requirements:
B.Sc. in Electrical, Mechanical, Biomedical Engineering, or a related technical field.
Minimum 3 years of hands-on experience in a V V role within a medical device company
Strong experience in system -level testing of hardware/software products, including TEST
protocol development and execution
Familiarity with regulatory testing requirements such as EMC, Safety, and Environmental standards.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8902450
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
דרושים בגב מערכות
מיקום המשרה: יקנעם
סוג משרה: משרה מלאה ועבודה היברידית
מהנדס/ת ייצור - Manufacturing Engineer
לחברת מכשור רפואי מובילה דרוש/ה מהנדס/ת ייצור להשתלבות בפרויקטי R D, פיתוח והטמעת תהליכי ייצור חדשים ושיפור תהליכים קיימים.

מה בתפקיד?
פיתוח, אופטימיזציה ושיפור תהליכי ייצור
כתיבה ועדכון של הוראות עבודה
הובלת ולידציות ציוד ותהליך - IQ / OQ / PQ / TMV
ביצוע ניסויים הנדסיים ו-Troubleshooting
ניהול סיכונים ו-PFMEA
תמיכה ב-NPI ובהעברת מוצרים ותהליכים לייצור
עבודה עם ECO/ECN ותיעוד הנדסי וייצורי
עבודה מול ממשקים כגון R D, איכות, רגולציה וייצור
דרישות:
תואר ראשון בהנדסה - מכונות / ביו-רפואה / חומרים / כימיה או תחום רלוונטי
2+ שנות ניסיון בהנדסת תהליך או ייצור בתעשיית המכשור הרפואי
ניסיון בוולידציות IQ/OQ/PQ/TMV
ניסיון ב-NPI, PFMEA ו-ECO/ECN
אנגלית ברמה גבוהה

משרה בסביבה מולטי-דיסציפלינרית ובתעשיית ה-Medical Devices

יוקנעם המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8881893
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
דרושים בגב מערכות
מיקום המשרה: יקנעם
סוג משרה: משרה מלאה ועבודה היברידית
מיקום: יקנעם

תיאור התפקיד: לחברה מובילה בתחום המכשור הרפואי דרוש/ה מהנדס/ת תהליך מנוסה להובלת תהליכי פיתוח, שיפור והטמעת תהליכי ייצור, והעברת מוצרים מפיתוח לייצור (NPI) בסביבה רגולטורית קפדנית.

תחומי אחריות:
תכנון, פיתוח ואופטימיזציה של תהליכי ייצור חדשים וקיימים (קווי רפואי חד-פעמי).
כתיבה וביצוע של וולידציות לתהליכים וציוד (IQ, OQ, PQ), וביצוע ניסויים (DOE).
הובלת תוצרי הנדסה ואיכות הקשורים ל-NPI, בקרת תכנון ושינויים הנדסיים (ECO).
יצירת תיעוד הנדסי מלא (GOIs, BOMs, Routers, FMEAs) ועבודה תחת תקן ISO 13485.
ממשק שוטף מול רצפת הייצור ומחלקות הפיתוח והאיכות.
דרישות:
השכלה: תואר ראשון בהנדסת מכונות / ביו-רפואית / חומרים או דומה - חובה.
ניסיון מקצועי: 5 שנות ניסיון ומעלה כמהנדס/ת תהליך או ייצור - חובה.
רקע תעשייתי: ניסיון מוכח מתעשיית המכשור הרפואי או תעשייה מפוקחת אחרת - חובה.
וולידציות: ניסיון מעשי מוכח בביצוע וולידציות ציוד ותהליך - חובה.
ניסיון בכתיבת FMEA - חובה.
יחסי אנוש מעולים, יכולת פתרון בעיות (Problem Solving) וראייה מערכתית.

יתרון משמעותי:
ניסיון בהובלת תהליכי חקר כשלים (RCA) וניהול פרויקטי CAPA.
ידע בעיצוב מתקנים (Tooling) ואוטומציה. המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8855644
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
2 ימים
דרושים באלביט מערכות
מיקום המשרה: יקנעם
סוג משרה: משרה מלאה
לאתר החברה ביוקנעם דרוש.ה מהנדס.ת ייצור

במסגרת התפקיד:
תכנון מתקנים וכלים: אחריות על פיתוח ותכנון מתקני ייצור, כלים ופתרונות מכניים בהתאם לדרישות
המוצר והתהליך
תכנון תהליכי ייצור לעיבוד שבבי: הגדרת תהליכי עיבוד, בחירת כלים, קביעת פרמטרים, כתיבת מסמכי
ייצור וליווי מקצועי של מחלקות הייצור
ליווי הייצור משלב הדגם הראשון ועד לסיום סדרת הייצור:כולל ביצוע בדיקות, התאמות הנדסיות,
פתרון בעיות בזמן אמת ושיפור תהליכים לאורך חיי המוצר
עבודה בסביבה מאתגרת ומגוונת: שילוב בין עבודה משרדית לבין נוכחות בשטח ברצפת הייצור לצורך
ליווי, בקרה ומתן תמיכה מקצועית
דרישות:
ניסיון של 3 שנים לפחות בתכן מכני - כולל תכנון מתקנים, כלים ופתרונות הנדסיים עבור קווי ייצור ותהליכי עיבוד
ניסיון בתכנון תהליכי ייצור לעיבוד שבבי - הבנה מעמיקה בכלים, פרמטרים, חומרים, ושיטות ייצור (חריטה, כרסום, CNC)
ניסיון של 5 שנים לפחות בעבודה במערכות תיב"מ, ידע ב- NX - יתרון
יכולת למידה עצמית גבוהה
יכולת עבודה בצוות
יכולת גבוהה בטיפול בנושאים שונים במקביל, תוך ירידה לפרטים
תקשורת בין אישית טובה
כושר ביטוי בעל פה ובכתב בעברית ואנגלית

*רק פניות מתאימות יענו המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8773226
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה ועבודה היברידית
חברת מוליכים למחצה בינלאומית בצפון מגייסת מנהל /ת תפי וייצור - Production Planning Manager למחלקת התפעול.
התפקיד כולל אחריות כוללת על תכנון, תזמון וניהול הייצור בפועל: בניית תוכניות ייצור יומיות/שבועיות/חודשיות, ניהול פקודות עבודה, ניהול צוותי אינטגרציה, הקצאת משאבים, מעקב אחר התקדמות מערכות, פתרון תקלות רצפה, שיפור תהליכים, עמידה ביעדי OTIF, איכות ובטיחות.
תחומי אחריות מרכזיים:
בניית תוכניות ייצור בהתאם להזמנות, BOM, תחזיות וS OP.
ניהול רצפת הייצור, אינטגרציה, כיול ובדיקות סופיות.
ניהול צוותי ייצור ואינטגרציה, משימות, משמרות ושעות נוספות.
מעקב אחר פקודות עבודה, תפוקות, זמני ביצוע וYield.
זיהוי צווארי בקבוק והובלת פעולות שיפור.
פתרון תקלות רצפה בשיתוף הנדסה, R D ואיכות.
הטמעת ECO, SOP, Lean, 5S וQMS.
הובלת Gemba ודיווחי סטטוס יומיים, שבועיים וחודשיים.
הדרכת עובדים, הסמכות ובניית תרבות של אחריות ושיפור מתמיד.
דרישות:
ניסיון של 4 שנים לפחות בניהול ייצור / תפי / תזמון / ניהול רצפת ייצור.
ניסיון בסביבה יצרנית טכנולוגית או מולטידיסציפלינרית.
ניסיון בניהול עובדים וצוותי אינטגרציה.
היכרות עם ERP /MRP, BOM, פקודות עבודה ותוכניות ייצור.
יכולת אנליטית גבוהה ושליטה בExcel.
ניסיון בעבודה מול הנדסה, איכות, שרשרת אספקה, רכש ושירות.
יכולת Hands-on, הובלה, פתרון בעיות וניהול תחת לחץ.
יתרון לתואר בהנדסת תעשייה וניהול / מכונות / חשמל / ייצור.
יתרון לניסיון בLean, 5S, QMS, ECO/NPI ומערכות מולטידיסציפלינריות המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8908908
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
2 ימים
דרושים בקבוצת נישה
מיקום המשרה: יקנעם
סוג משרה: משרה מלאה
לחברה טכנולוגית מובילה דרוש/ה מהנדס/ת מכונות להצטרף לצוות הפיתוח
דרישות:
BSc בהנדסת מכונות- חובה
לפחות 5 שנות ניסיון כמהנדס מכונות בפיתוח וניסיון חזק בשימוש SOLIDWORKS- חובה
היכרות עם מתקנים ומכלולים מכאניים- חובה
ניסיון בבקרה - יתרון.
כתיבת מפרטים - יתרון.
ניסיון בתכן פלסטיק - יתרון משמעותי
ניסיון מחברות מכשור רפואי- יתרון משמעותי המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8807070
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Yokne`am
Job Type: Full Time
Required Product Line Leader Engineer
Job Description:
The Product Line Leader Engineer is responsible for defining, maintaining, and continuously improving production processes to ensure quality, efficiency, and scalability. The role focuses on process ownership, implementation of engineering methodologies, and supporting stable production while enabling yield, cycle time, and cost improvements.
Key Responsibilities:
Own and maintain production processes, process flows, and work instructions.
Define and implement production engineering methodologies to improve quality, yield, and efficiency.
Provide daily engineering support to production lines, including hands-on troubleshooting.
Lead root cause analysis for process-related issues and implement corrective and preventive actions.
Drive yield improvement, scrap reduction, and cycle time optimization initiatives.
Support introduction of new products and processes in collaboration with NPI and R&D teams.
Define process parameters, control plans, and acceptance criteria.
Lead process validation, qualification, and change management activities (ECO).
Collaborate with Quality to ensure compliance with internal and customer requirements.
Support production ramp-up, line balancing, and capacity planning activities.
Work with Maintenance and Test Engineering to ensure equipment and test readiness.
Drive standardization and best practices across production lines.
Requirements:
Education & Experience:
BSc in Mechanical, Mechatronics Engineering, or related fields.
3-5+ years of experience as a Production Engineer, Process Engineer, or similar role in a manufacturing environment.
Production Engineering Methodologies
Strong knowledge and practical application of Lean Manufacturing principles.
Experience with Six Sigma tools and data-driven process improvement.
Hands-on use of SPC, control charts, and statistical analysis.
Experience performing PFMEA and defining control plans.
Familiarity with standard work, line balancing, and takt time concepts.
Experience with problem-solving methodologies such as 8D, 5W
Technical Skills:
Ability to define and document production processes and specifications.
Strong root cause analysis and troubleshooting skills.
Experience with process validation and qualifications.
Familiarity with ECO and change management processes.
Preferred Skills:
Experience supporting NPI and production ramp-up.
Knowledge of automation, fixtures, and manufacturing equipment.
Experience working in regulated or high-reliability manufacturing environments.
Personal Skills:
Strong ownership and accountability mindset.
Structured, analytical, and detail-oriented approach.
Ability to work independently in a fast-paced production environment.
Strong communication and cross-functional collaboration skills
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8870861
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
09/11/2026
חברה חסויה
Location: Yokne`am
Job Type: Full Time
Rapid Medical is a fast-growing medical device company focused on developing, manufacturing, and selling innovative devices for endovascular interventional procedures. We are looking for a talented and creative engineer to join our R&D team and be a key player in our future development. LOCATION: Yokneam, Israel
SCOPE & RESPONSIBILITIES:
* Design and develop innovative neurointerventional medical devices as part of the R&D team.
* Plan and execute verification tests for new prototypes and new products
* Prepare product documentation, including DHF and DMR
* Analyze test results and author detailed engineering reports
* Collaborate with Quality and Regulatory Affairs to ensure design control compliance
* Lead design transfer activities, support pilot production, and transition products into manufacturing
Requirements:
* Bachelor’s degree in Mechanical or Biomedical Engineering from a leading university GPA 85+
* 2-5 years of experience in a relevant engineering role
* Hands-on experience in the medical device industry – an advantage
* Familiarity with design control processes and standards (ISO 13485, FDA 21 CFR 820) – an advantage
* Proficiency with SolidWorks – an advantage
* Full proficiency in English, including reading and writing technical documentation
* Team player with strong communication skills, self-driven and detail-oriented
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8773679
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Yokne`am
Job Type: Full Time
We are seeking a highly motivated Application Engineer & Technical Marketing Specialist to support customers worldwide in the integration and deployment of advanced gimbaled EO/IR payloads, combining Visible (VIS) and Long-Wave Infrared (LWIR) cameras for UAV and drone applications.
This customer-facing role combines system engineering, technical support, product marketing, and business development activities. The successful candidate will serve as the technical bridge between customers, engineering teams, and sales organizations, helping customers maximize the value of our solutions while identifying new business opportunities.
Job Responsibilities:
Key Responsibilities
Technical Support & Application Engineering:
Provide technical support to customers and partners throughout the product lifecycle.
Support integration of EO/IR payloads on UAV, UAS, drone, and robotic platforms.
Conduct system configuration, troubleshooting, testing, and validation activities.
Lead technical investigations and resolve complex field issues.
Perform on-site customer support, demonstrations, acceptance tests, and field trials.
Work closely with multidisciplinary R&D teams including mechanical, electrical, software, and system engineers.
Develop application notes, integration guides, and technical documentation.
Deliver technical training to customers, distributors, and system integrators.
Support pre-sales and post-sales activities worldwide.
Technical Marketing & Business Development:
Conduct customer presentations, product demonstrations, and technical workshops.
Identify customer needs and translate market requirements into product recommendations.
Assist in preparation of marketing materials, technical presentations, and demonstration scenarios.
Support preparation and technical responses to RFIs/RFPs.
Requirements:
Required Qualifications:
B.Sc. degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Physics, Computer Engineering, or a related field.
3+ years of experience in Application Engineering, Systems Engineering, Field Engineering, Technical Support, or similar customer-facing technical roles.
Experience with electro-optical systems, imaging systems, sensors, cameras, or defence -related technologies - advantage.
Strong system-level understanding and troubleshooting capabilities.
Experience working directly with customers and international partners.
Excellent verbal and written communication skills in English.
Ability to travel internationally as required.
Preferred Qualifications:
Experience with EO/IR payloads, thermal imaging systems, or LWIR cameras.
Familiarity with UAV/UAS platforms and drone applications.
Knowledge of communication interfaces.
Experience with system integration, validation, and field testing.
Background in defence, aerospace, homeland security, or robotics applications.
Experience with Python, MATLAB, or diagnostic/debugging tools- advantage.
Pilot or drone operator certification - an advantage.
Desired Personal Attributes:
Strong customer-facing and presentation skills.
Technical credibility combined with commercial awareness.
Excellent problem-solving and analytical abilities.
Self-motivated, proactive, and results-driven.
Ability to communicate effectively with both engineers and business stakeholders.
Comfortable working in a dynamic international environment.
Passion for innovative technologies and customer success.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8870869
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
03/11/2026
חברה חסויה
Location: Yokne`am
Job Type: Full Time
we have been transforming computer graphics, pc gaming, and accelerated computing for more than 25 years. it's a unique legacy of innovation that's fueled by great technology-and amazing people. today, we're tapping into the unlimited potential of ai to define the next era of computing. an era in which our gpu acts as the brains of computers, robots, and self-driving cars that can understand the world. doing what's never been done before takes vision, innovation, and the world's best talent. as a member of our team, you'll be immersed in a diverse, supportive environment where everyone is inspired to do their best work. come join the team and see how you can make a lasting impact on the world.
we drive the evolution of innovation using ai technology, reshaping industries and delivering groundbreaking progress. as an opto-mechanical engineer in the CPO group, you will be central to these initiatives, working alongside a team committed to high standards and joint effort. this position uniquely enables you to impact the development of powerful opto-mechanical systems that empower our technology, crafting meaningful change in the world.
what you'll be doing:
support developing development of opto-mechanical components and systems with precision and innovation.
conducting assembly and testing, including fabricating the essential jigs and fixtures for smooth execution.
collaborating closely with cross-functional teams to ensure outstanding product development.
develop and collaborate with global vendors to ensure on time delivery of products.
Requirements:
what we need to see:
bachelor's degree or equivalent experience in mechanical engineering
2+ years working in the development of opto-mechanical components or systems.
proven experience in defining and conducting tests including crafting all supporting jigs and fixtures.
outstanding problem-solving skills and a meticulous attention to detail.
ability to collaborate effectively in a diverse and inclusive global environment.
excellent communication skills to articulate complex technical concepts.
experience with creo or solid works 3d cad software.
ways to stand out from the crowd:
background with fiber optics and related components
familiarity with siph and CPO technologies
knowledge of industry standards and guidelines in electronic packaging and si processing.
previous work in a high-tech, fast-paced environment.
we have some of the most forward-thinking and hardworking people in the world working for us and, due to unprecedented growth, our world-class engineering teams are growing fast. if you're a creative and autonomous engineer with a real passion for technology, we want to hear from you. we are committed to fostering a diverse work environment and proud to be an equal opportunity employer. as we highly value diversity in our current and future employees, we do not discriminate (including in our hiring and promotion practices) on the basis of race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8882929
סגור
שירות זה פתוח ללקוחות VIP בלבד