דרושים » ייצור ותעשייה » Senior Thermal-Mechanical Engineer

We are looking for a highly experienced Senior Thermal Engineer to join our Architecture engineering team and take a key role in the development of next-generation SoCs, ECUs, and high-performance compute platforms for autonomous driving systems.
The position combines SoC/package thermal development, ECU cooling architecture, thermal simulation, characterization, validation, and vehicle-level thermal integration, working across multiple next-generation programs from early concept through qualification and production.
Please note: This position is also relevant for our other sites in Haifa, Petah Tikva, and Jerusalem.
What will your job look like?
Work on thermal development of next-generation SoCs and air/liquid-cooled ECU platforms, covering product requirements, thermal architecture, design, simulation, characterization, testing and qualification.
Perform detailed thermal performance assessment and CFD analysis of next-generation SoC/package designs, including die/package temperature distribution, heat spreading, thermal interfaces, material and stack-up optimization, and thermal resistance evaluation
Develop and evaluate advanced cooling solutions, including air cooling, liquid cooling, heat pipes, and advanced heat-spreading technologies.
Support vehicle-level cooling architecture and ECU integration for next-generation autonomous driving and Robotaxi platforms.
Define cooling requirements including coolant temperature, flow rate, pressure drop, thermal interfaces, and system thermal margins.
Correlate simulation results with laboratory and product measurements, drive thermal optimization and troubleshooting throughout development and qualification.
Work closely with silicon Arch, package, HW, mechanical, electrical, validation, suppliers, Tier-1s and OEM customers.

We are looking for a highly experienced Senior Thermal Engineer to join our Architecture engineering team and take a key role in the development of next-generation SoCs, ECUs, and high-performance compute platforms for autonomous driving systems.
The position combines SoC/package thermal development, ECU cooling architecture, thermal simulation, characterization, validation, and vehicle-level thermal integration, working across multiple next-generation programs from early concept through qualification and production.
Please note: This position is also relevant for our other sites in Haifa, Petah Tikva, and Jerusalem.
What will your job look like?
Work on thermal development of next-generation SoCs and air/liquid-cooled ECU platforms, covering product requirements, thermal architecture, design, simulation, characterization, testing and qualification.
Perform detailed thermal performance assessment and CFD analysis of next-generation SoC/package designs, including die/package temperature distribution, heat spreading, thermal interfaces, material and stack-up optimization, and thermal resistance evaluation
Develop and evaluate advanced cooling solutions, including air cooling, liquid cooling, heat pipes, and advanced heat-spreading technologies.
Support vehicle-level cooling architecture and ECU integration for next-generation autonomous driving and Robotaxi platforms.
Define cooling requirements including coolant temperature, flow rate, pressure drop, thermal interfaces, and system thermal margins.
Correlate simulation results with laboratory and product measurements, drive thermal optimization and troubleshooting throughout development and qualification.
Work closely with silicon Arch, package, HW, mechanical, electrical, validation, suppliers, Tier-1s and OEM customers.

We are looking for a highly experienced Senior Thermal Engineer to join our Architecture engineering team and take a key role in the development of next-generation SoCs, ECUs, and high-performance compute platforms for autonomous driving systems.
The position combines SoC/package thermal development, ECU cooling architecture, thermal simulation, characterization, validation, and vehicle-level thermal integration, working across multiple next-generation programs from early concept through qualification and production.
Please note: This position is also relevant for our other sites in Haifa, Petah Tikva, and Jerusalem.
What will your job look like?
Work on thermal development of next-generation SoCs and air/liquid-cooled ECU platforms, covering product requirements, thermal architecture, design, simulation, characterization, testing and qualification.
Perform detailed thermal performance assessment and CFD analysis of next-generation SoC/package designs, including die/package temperature distribution, heat spreading, thermal interfaces, material and stack-up optimization, and thermal resistance evaluation
Develop and evaluate advanced cooling solutions, including air cooling, liquid cooling, heat pipes, and advanced heat-spreading technologies.
Support vehicle-level cooling architecture and ECU integration for next-generation autonomous driving and Robotaxi platforms.
Define cooling requirements including coolant temperature, flow rate, pressure drop, thermal interfaces, and system thermal margins.
Correlate simulation results with laboratory and product measurements, drive thermal optimization and troubleshooting throughout development and qualification.
Work closely with silicon Arch, package, HW, mechanical, electrical, validation, suppliers, Tier-1s and OEM customers.

In this role, you will lead all mechanical aspects of the product in R&D projects, taking it from concept to full scale development while working with multidisciplinary teams that include system engineering, physics, electronics, software, project managers, and others. You will serve as a technical focal point for mechanical design decisions, balancing performance, manufacturability, reliability, and cost.

Your role:

Lead the mechanical design including 3D models, drawings, prototype manufacturing, and production transfer.

Provide solutions that optimize performance, service, manufacturability, and cost.

Perform required analysis, testing, troubleshooting, and documentation.

Work with local and global teams inside and outside Philips to answer design, service, and production challenges.

Own mechanical risk identification, mitigation plans, and design reviews.

Operate in a multidisciplinary environment under conflicting constraints of performance, reliability, cost, and development schedule.

we are an agile defense-tech startup tackling the most complex challenges in counter-drone and uncrewed defense. With hundreds of combat-proven systems deployed by the IDF and global partners, we are now engineering the next generation of C-UxS (Counter-Uncrewed Systems). We leverage advanced electronic warfare and kinetic measures to detect and neutralize hostile threats. If you want to push technological boundaries while safeguarding Israel and our allies, join us at this pivotal stage of our growth.
This is a unique opportunity to join a company at a pivotal growth stage and help shape its products, culture, and future.
DART is an autonomous counter-drone system: a standalone system and a radar-cued ground station launch small interceptor drones that acquire an airborne target with a thermal seeker and defeat it by direct impact. The interceptor is built on a COTS high-agility racer platform, with Betaflight closing the inner rate loop and a mission computer running perception and outer-loop guidance.
You will own the two disciplines that determine whether the interceptor actually hits: guidance and control law design, and the simulation environment used to develop, validate, and regression-test those laws before anything flies. This is a hands-on leadership role - you are expected to write and tune code, sit in front of flight logs, and stand in the field on test days, while also setting technical direction for a small team.
Key Responsibilities
Own outer-loop guidance (image-based thermal aim, pursuit/proportional-navigation, latency-compensated LOS, and throttle management) and manage end-to-end latency and stability budgets.
Implement and tune controllers (from PID/PI to adaptive/MPC), define flight controller interfaces (MSP/CRSF/SBUS injection), and govern the flight-mode state machine, failsafes, and safety envelope.
Deliver the 6-DOF simulation product (interceptor/target dynamics, thermal seeker), maintain SIL/HIL rigs for unmodified production code, validate models against flight data, and run automated regression suites and KPIs.
Lead and mentor the control and simulation team, set test-progression gates (sim to full-envelope flight), collaborate closely with Vision and Systems Engineering, and produce all required technical artifacts.

This role is suitable for engineers in early stages of their career, with strong hands‑on orientation and willingness to grow into broader system responsibilities. The Mechanical Engineer is responsible for mechanical design and development of components & sub- assemblies within the complex detection systems for CT machines. You will progressively take full ownership of end‑to‑end mechanical deliverables, ensuring design quality and robustness throughout the entire product lifecycle. This includes responsibility from initial concept and preliminary design through critical design, prototyping, manufacturing transfer, and ongoing production support.

Your role:

Perform mechanical design - CAD models, drawings, prototype manufacturing, and production transfer

Perform mechanical calculations and analyses including hand calculations, tolerance analysis, and basic FEA

Perform testing, troubleshooting, and documenting of mechanical units/subsystems of small to medium scope

Prepare engineering documentation - specifications, drawings, test reports

Analyze and propose mechanical solutions to DMS subsystem challenges. Ability to evaluate & define the design correction - when needed

Under guidance of senior engineers and management, actively participate in system‑level design reviews and integration, contributing mechanical input.

we are an agile defense-tech startup tackling the most complex challenges in counter-drone and uncrewed defense. With hundreds of combat-proven systems deployed by the IDF and global partners, we are now engineering the next generation of C-UxS (Counter-Uncrewed Systems). We leverage advanced electronic warfare and kinetic measures to detect and neutralize hostile threats. If you want to push technological boundaries while safeguarding Israel and our allies, join us at this pivotal stage of our growth.
This is a unique opportunity to join a company at a pivotal growth stage and help shape its products, culture, and future.
We are looking for a Mechanical Design Team Leader to lead the mechanical engineering activities within our kinetic interception team, where we use racer drones for C-UAS interception. This is a hands-on leadership role at the heart of the practical R&D of our drones and their supporting platforms. The Team Leader will combine direct engineering contribution with technical mentoring, work planning, and responsibility for the quality and timely delivery of the team's mechanical designs.
Key Responsibilities
Lead, mentor, and develop the mechanical team (recruiting, onboarding, feedback), while planning work and allocating resources to match program milestones and priorities.
Drive the mechanical architecture and technical direction of autonomous racer drones, launchers, and platforms, remaining hands-on in design, prototyping, integration, and testing.
Lead design reviews (meeting performance, reliability, safety, cost) and establish strict engineering practices including CAD standards, GD&T, BOMs, ECOs, and PLM workflows.
Oversee the mechanical integration of electronics, harnesses, and electromechanical components; coordinate structural analysis, design validation, prototype builds, and translate test results into improvements.
Identify and mitigate technical/schedule risks, and collaborate closely with systems, software, manufacturing, suppliers, operations, and leadership.

We are seeking an experienced and self-driven Systems Engineering Functional Manager to lead our systems engineering team for our CT/AMI detection platform (DMS). This team is responsible for the full lifecycle of system-level development from systems design, requirements management, architecture design, execution of technical reviews, setting the integration plan to verification, validation, and regulatory compliance.

Your role:
Lead and mentor a multidisciplinary systems engineering team, fostering growth, collaboration, and technical excellence.
Provide strategic and hands-on technical guidance in the development of CT/AMI detection platforms.
Oversee engineering planning and execution to support complex project ensuring timelines and quality standards are met.
Resource assignment and prioritization including headcount and budget management.
Working across functions and team boundaries to define, design, and implement the next generation of products.
Decision making in cross-disciplinary and architectural aspects.
Drive continuous improvement in engineering and systems engineering processes and tools.
Support audits and regulatory inspections as a subject matter expert.
Represent DMS System Design in global engineering forums and initiatives.

As a Senior R&D Process Development Engineer , you will play a key role in a multidisciplinary engineering team driving the design, development, and launch of next‑generation manufacturing platforms that enable future CT detector technologies. You will work closely with design and hardware teams to translate breakthrough concepts into scalable, automated production processes that deliver reliability, precision, and manufacturability at scale.

Your role:
Team Collaboration: Work as a key member of the R&D process team to develop, test, and implement automated assembly solutions for future products.
Process Development: design and optimization of new automatic assembly lines, specifically for high-precision CT detector modules.
Hands-on Implementation: Support the integration and fine-tuning of Die Attach systems and Epoxy/solder Dispensing processes within the R&D lab and pilot lines.
DFM Support: Participate in design reviews to provide DFM (Design for Manufacturing) insights, ensuring that new detector designs are optimized for assembly.
Technology Evaluation: Assist in benchmarking and testing new manufacturing technologies and equipment to determine their feasibility for future product lines.
Validation & Documentation: Execute DOEs (Design of Experiments) and document process characterization as part of the teams effort to meet medical regulatory standards.

abra professional services is seeking a talented Aeromechanical Engineer If you are looking for a meaningful technological journey filled with multidisciplinary challenges, come and be a part of our story. As an Aeromechanical Engineer, you will join our Aeromechanics Team within the Platform Development Division at the company’s Modi'in site. Key Responsibilities:
* Participate in the mechanical design of airborne structures, mechanisms, and aircraft systems.
* Drive end-to-end development and validation, from initial conceptual design through to mass production.
* Improve, optimize, and upgrade existing operational products.
* Oversee production accompaniment, environmental/flight testing, and the preparation of detailed engineering drawings.
* Author technical requirements, design specifications, and engineering reports.