דרושים » הנדסה » Senior Analog & Power Validation Engineer - Camera & Laser Sensor Systems

Requirements:
Minimum Qualifications
BSc in Electrical Engineering, Computer Engineering, Physics, or a related field.
7+ years of extensive experience in embedded systems, electro-optical sensor integration, or related disciplines.
Strong Python proficiency - automation frameworks, data analysis, instrument control, and test development.
Demonstrated experience with HW/SW automation, design control, and development methodologies.
Solid understanding of camera and laser sensor technologies and associated interface protocols.
Proven ability to bridge the gap between physics-level understanding and engineering implementation.
Deep understanding of electro-optical sensor principles - including photodetection, quantum efficiency, noise characterization (read noise, dark current, shot noise), and signal-to-noise ratio analysis.
Experience with optical test bench setups: integrating spheres, collimators, laser sources, spectral filters, and beam profiling equipment.
Familiarity with LiDAR / ToF sensor technologies - including timing resolution, range accuracy, and multi-path interference analysis.
Knowledge of image sensor characterization methodologies.
Experience with radiometric and photometric measurements and calibration procedures.
Understanding of laser safety classifications, optical power measurement, and wavelength characterization.
Ability to define and execute environmental and stress testing protocols for optical sensor assemblies.

Preferred Qualifications
Advanced degree (MSc or PhD) in Physics, Electro-Optics, or Electrical Engineering.
Experience with embedded firmware development or firmware-hardware co-validation.
Familiarity with CI/CD pipelines for hardware validation environments.

Requirements:
Minimum Qualifications
BSc in Electrical Engineering, Computer Engineering, Mechanical Engineering, Physics, or a related field - advanced degree strongly preferred.
7+ years of experience in environmental testing, sensor characterization, or embedded system validation.
Strong Python proficiency - automation, data analysis, instrument control, and framework development.
Proven experience bringing up sensors and subsystems on new development platforms.
Hands-on experience with HW/SW automation design, control systems, and development workflows.
Strong system-level vision - ability to comprehend the full system architecture and understand how individual sensor components interact within the broader product context.
System-to-component testing capability - proven ability to conduct system-level validation while diving deep to the component level for root-cause analysis, failure isolation, and detailed characterization.
Strong experience in environmental test design and execution for electro-optical systems.
Proficiency in system-level Test firmware development for embedded sensor platforms.
Demonstrated ability to architect and implement automation frameworks (Python-based) supporting: Instrument control and data acquisitio; API development for system-level integration; End-to-end test orchestration and regression capabilities.
Knowledge of optical performance metrics - MTF, field of view, distortion, stray light, and dynamic range under varying environmental conditions.
Familiarity with environmental simulation equipment - solar simulators, rain chambers, thermal chambers, vibration tables, and motion stages.
Understanding of laser sensor behavior under environmental stress - including atmospheric scattering, thermal drift, and background noise rejection.
Experience with sensor alignment and calibration methodologies in controlled laboratory settings.

Preferred Qualifications
MSc in Physics, Electro-Optics, Electrical Engineering, or a related discipline - considered a significant advantage.
Experience working with VXcl platforms and Sony image sensors - configuration, bring-up, characterization, and integration.
Experience developing custom test fixtures and mechanical setups for optical evaluation - including design, specification, and validation of purpose-built environmental and alignment rigs.

Requirements:
* B.Sc./M.Sc. in Electrical Engineering from a recognized university.
* Over 10 years of experience in analog or mixed-signal design, simulation, and characterization of circuits such as operational amplifiers, comparators, reference circuits, ADC/DAC, PLL, etc. It would be an advantage if you have:
* Strong knowledge of MOS, Bipolar transistors, and high-voltage IC processes (e.g., BCD, SOI).
* Experience with integrated power electronic circuits such as DC-DC converters, gate drivers, charge pumps, rectifiers, and LDOs.
* Experience in full-chip integration, including interfaces with digital and hardware.
* Familiarity with layout verification and extraction tools.

Requirements:
* B.Sc./M.Sc. in Electrical Engineering from a recognized university.
* Over 6 years of experience in analog or mixed-signal design, simulation, and characterization of circuits such as operational amplifiers, comparators, reference circuits, ADC/DAC, PLL, etc. It would be an advantage if you have:
* Strong knowledge of MOS, Bipolar transistors, and high-voltage IC processes (e.g., BCD, SOI).
* Experience with integrated power electronic circuits such as DC-DC converters, gate drivers, charge pumps, rectifiers, and LDOs.
* Experience in full-chip integration, including interfaces with digital and hardware.
* Familiarity with layout verification and extraction tools.

Requirements:
Minimum Qualifications
BSc in Electrical Engineering, Computer Engineering, Acoustics, Audio Engineering, or a related field.
7+ years of experience in audio testing, voice quality evaluation, or acoustic system validation.
Proven experience working within or alongside professional audio/acoustic test laboratories.
Demonstrated ability to design repeatable, controlled test environments and methodologies.
Experience with both objective measurement tools and subjective listening evaluation protocols.
Strong system-level understanding with the ability to isolate quality issues to specific processing stages.
Deep understanding of audio signal processing fundamentals - frequency domain analysis, filtering, spectral characteristics, and time-domain behavior
Hands-on experience with voice quality measurement tools and standards (POLQA, PESQ, 3QUEST, ETSI standards).
Familiarity with HEAD acoustic test equipment - measurement microphones, artificial heads (HATS), mouth simulators, and anechoic/semi-anechoic chamber setups.
Strong proficiency in Python for test automation, data analysis, audio signal processing, and framework development.
Experience with audio acquisition systems, DACs/ADCs, and real-time audio streaming architectures.
Understanding of latency measurement methodologies in real-time audio systems.

Preferred Qualifications
MSc in Acoustics, Audio Signal Processing, Electrical Engineering, or a related discipline - considered a significant advantage.
Experience with speech recognition systems and WER evaluation methodologies.
Background in psychoacoustics or subjective audio evaluation research.
Experience with environmental simulation lab design and commissioning.
Knowledge of ITU-T P-series recommendations and ETSI test specifications.

Requirements:
* B.Sc. in Electrical Engineering - Must
* 2 years of experience in circuit design and HW board design - Must
* Experience working with lab equipment such as Spectrum, Scope, and Electronic Loads - Must
* Experience with simulation tools such as LtSpice, Pspice, etc. - Advantage
* Knowledge in Analog circuits, LCR components, filters, Op Amps behavior - Must
* Knowledge of DC2DC converter topologies such as Buck, Boost, Flyback - Must
* Experience with OrCAD tools for board design - Allegro, Capture, etc. - Advantage
* Software programming skills, experience working with microcontrollers - Advantage
* Ability to multitask and prioritize tasks in a fast-paced environment - Must

Requirements:
Minimum Qualifications:
Minimum: Bachelor's degree in Electrical Engineering or Computer Science.
Wireless Systems: 8+ years of experience in wireless communication systems design, with deep understanding of multiple wireless standards (WiFi, Cellular, Bluetooth, Zigbee, etc.).
Software Architecture: Proven track record of architecting large-scale, complex software systems with emphasis on real-time and embedded systems.
Protocol Development: Extensive experience with wireless protocol design, implementation, and optimization.
System Integration: Expert knowledge of hardware-software co-design and system-level optimization techniques.
Programming Proficiency: Strong skills in C/C++, Python, and system-level programming languages.
Performance Engineering: Experience with real-time systems, multi-threading, and performance optimization techniques.
Architectural Leadership: Demonstrated ability to lead architectural decisions and influence technical direction across multiple teams.
Communication Excellence: Outstanding written and verbal communication skills with ability to present complex technical concepts to diverse audiences.
Self-Motivated: Exceptional ability to work independently and drive initiatives.
Systems Thinking: Ability to see the big picture while understanding intricate technical details.

Preferred Qualifications:
Master's degree (MSc) in Electrical Engineering, Computer Science, or related field.
Ph.D. in relevant field is advantageous.

Requirements:
* BSc. In Electronic Engineering/ MSc. in physics
* 4+ years of experience as an Integration Engineer, System validation, System Engineer, or equivalent
* Experience using AI tools
* Experience with development or system validation/ integration of Multi-Disciplinary systems
* Proven Experience in programming languages
* Familiarity with power electronics
* Experience using bug tracking tools (e.g. JIRA)
* Experience with Lab equipment such as Scope, Power Supplies, Power meters, etc.
* English- high level
* Familiarity with GIT version control Skills:
* Fast & Self-learning, problem solver demonstrating multidisciplinary thinking.
* Excellent communication skills with the ability to work and lead cross-team tasks.
* Performing in short- and long-term projects in parallel.
* Team player.
* Independent, and able to perform under pressure. ?SolarEdge recognizes its talented and diverse workforce as a key competitive advantage. Our business success is a reflection of the quality and skill of our people. SolarEdge is committed to seeking out and retaining the finest human talent to ensure top business growth and performance

Requirements:
Minimum Qualifications
BSc in Electronics Engineering, Mechanical Engineering, Computer Science, or Physics.
At least 5 years of experience as a system engineer of multi-disciplinary systems, delivering products from PoC to mass production phase.
Detailed understanding of optical sensing systems and modules design: image sensors, laser emitters, optical elements, mechanics, assembly processes, laser drivers, SoC computation and interfaces.
Experience defining and tracking system requirements and specifications from system level, through sub-modules and components.
Expertise in system level modeling/simulation, image/signal processing and large scale data analysis in Matlab and/or Python.
Great interpersonal skills - team player with the ability to collaborate across multiple groups.

Preferred Qualifications
MSc/PhD in a relevant field (EE, ME, CS, or Physics) or equivalent.
Hands on lab experience with optical setups and/or electrical equipment.
Experience with laser safety and compliance domains.
Experience in the consumer electronics industry and vendors.

Requirements:
* B.Sc. in Electrical Engineering.
* 2+ years of experience in industrial/manufacturing environment
* Experience in troubleshooting electrical systems and equipment Technical Skills Required:
* Reading and understanding electrical schematics and drawings
* Experience with testing equipment and measurement tools: Scope, DVM, Power Supply, E-Loads, Spectrum analyzer etc.
* Proven understanding of Automated TEST Equipment.
* Programming skills in Python / C # - advantage.
* Knowledge in networking, computers & operating systems.
* Work closely with other departments to promote the product.
* Understanding of safety regulations and procedures.
* Familiarity with electronic components - characteristics and features.
* Ability to work on multiple tasks simultaneously.
* Fluency in English - require