לוח משרות דרושים ייצור ותעשייה

Duties & Responsibilities

Develops, plans, and executes the required asset strategies for maintaining integrity of all EMED facilities in alignment with the Asset Integrity Management (AIM) program. 

Responsible for leading inspection crews to understand integrity of fixed equipment - piping, vessels, heat exchangers, etc. 

Participate in risk assessments and prioritization of asset integrity anomalies  

Review and analyze asset integrity inspection results 

Communicates upcoming work activities and inspection results to other EMED departments (Operations, Engineering, Maintenance etc).  

Critically thinks about improvements to fixed equipment inspections and findings  

Familiarity with fixed equipment - piping, valves, heat exchangers- advantage  

Good general awareness of the key threats to integrity in a process industry environment (corrosion / erosion / fatigue etc) -advantage  

The Junior / Trainee Instrument Technician supports the installation, calibration, maintenance, and troubleshooting of instrumentation and control systems used in oil and gas operations. This role is designed for entry-level candidates and focuses on developing technical skills while working under close supervision of senior technicians, ensuring safe and reliable plant operations.

Assist senior technicians with the installation, calibration, and maintenance of field instruments such as:

Pressure, temperature, level, and flow transmitters

Control valves, actuators, and positioners

Analyzers and basic control systems.

Fire and Gas Detection and Protective Systems

Provides skills, experience, and expertise in the operations, maintenance, repair of instrumentation and control devices used to monitor and/or control various types of equipment and facilities. This includes transmitters, signal transmission systems, HMI, control processors, SIS, PCNs F&G systems, DCS/SCADA systems and final control elements.

Leads Inspection, Testing and Preventative Maintenance Routine programs.

Qualifies and performs initial witness of proving and calibration

Confer with Operations Support and Project Engineers on scopes that impact instrumentation

Conduct daily maintenance and troubleshooting of instrumentation and control systems within production operations.
Equipment includes but is not limited to:

o Flow, level, pressure, and temperature and vibration transmitters and principles of instrumentation (Including smart protocols such as Hart and fieldbus)

o Pressure switches and relays

o Digital valve controllers (DVC) and control valves; motor-operated valves (MOVs)

o Control valves & valve positioners

o Fire & Gas detection and protective systems

Maintain accurate records of calibration, repairs, and maintenance activities.

Update P&IDs, loop drawings, and instrumentation databases.

Generate reports on equipment performance and reliability issues.

Understand and adhere to the Management of Change (MoC) processes

Analyzes, assesses, and improves Valves and Flange asset integrity, reliability, and preventative as well as predictive maintenance programs.
Manages critical valve maintenance program for the Business Unit - identification, preventative maintenance program development and sustainment, and corrective repair for all assets in the Business Unit.
Leads identification and implementation of centralized vs facility led maintenance work activities for fixed equipment and valves across the Business Unit.
Performs/participates in inspections, reliability incident investigations, optimizations, and mechanical integrity reviews; incorporates findings into the asset care strategy.
Performs routine tasks independently. General supervision of non-routine work. Has basic knowledge of Chevron policies and practices.
Safety - Holds safety as a core value. Complies with safety requirements and expects others to do the same. Experience in industrial settings with a high level of risk recognition. Experience with Safe Work practices and procedures such as Isolation of Hazardous Energy, Confined Space Entry, Hot Work and Permit to Work systems.
Technical Knowledge - Experience with fixed equipment and Valve maintenance and troubleshooting. Broad knowledge of piping, fixed equipment, valves, welding, and reliability programs. Well versed in Work Order Management and Preventative maintenance platforms, ITPM development, valve maintenance. Experience in Operations / Maintenance / Engineering Support. Experience in supporting fixed equipment and valves maintenance activities and support of Turnaround (TAR) work scope planning and execution. Strong problem resolution skills.
Teamwork - Strong teamwork skills, strong communication skills, strong initiative, learning capacity, and mentoring ability. Ability to transfer knowledge and skills to less experienced employees. Able to work in a multilingual-cultural environment. Ability to work closely with Maintenance, Operations and Facilities Engineering to troubleshoot issues and solve complex problems.

Demonstrates ability to monitor and operate plant equipment and conduct routine duties and non-routine Operations activities.

Maintain a clean and organized work environment to identify hazards.

Toolbox talk and last-minute risk assessment using COW processes for a specific activity.

Demonstrates basic technical competencies and capabilities in upstream/ midstream/ downstream and manufacturing plant operations, including pipeline and hydrocarbon behavior

Demonstrates ability to troubleshoot and solve basic operational problems by teaming and collaborating with cross-functional teams

Supports and properly responds to unplanned events and their impact on equipment and operations.

Comply with the Companys safety standards, policies, and regulatory requirements

Identify and describe basic step-by-step maintenance requirements in Gas and chemical streams

Report and identify the source of surface staining on tanks and equipment.

Maintain, record, and inventory production supplies

It has basic ability to read/interpret/field as-built P&IDs, SAFE Charts, Cause & Effects.

Basic abilities to analyze trends of efficiency degradation on production equipment

Performs basic analysis of Process Safety Management (PSM)

Utilization of computerized systems, including SAP, D2 (document control), Enablon (E-PTW), and Bluebeam Revu.

Execute and understand MOC and RIK processes

Execute level 1 and level 2 Hazard analysis in general work, breaking containment, isolation of hazardous energy, bypass critical protection, and stop work authority to ensure safe operation.

Perform preventive, predictive, and corrective maintenance on rotating equipment such as Pumps, Compressors, Blowers, Engines, gearboxes, and related mechanical systems.

Troubleshoot mechanical issues using diagnostic tools, vibration analysis, and equipment history.

Support overhauls, breakdowns, and planned shutdown activities.

Ensure all work is performed according to engineering drawings, OEM (Original Equipment Manufacturer) manuals, and maintenance procedures.

Identify recurring mechanical problems and recommend long‑term solutions.

Safety & Compliance

Execute maintenance work in strict compliance with safety procedures MOC (Management of change), JRA (Job Risk Analyses), Control of Work, Start Work Checks.

Participate in toolbox talks and actively contribute to a safe working environment.

Maintain accurate records of inspections, repairs, and compliance checks.

Ensure proper hazardous energy isolation and safe work practices.

Project & Integrity Support

Assist with mechanical scopes of projects, upgrades.

Support asset integrity programs including vibration monitoring, lubrication management, and equipment condition assessments.

Participate in commissioning and start-up of new rotating equipment.

Collaborate with inspection teams on mechanical integrity and equipment health assessments.

Collaboration with Supply Chain

Identify required spare parts and support procurement of mechanical components and consumables.

Ensure proper storage and preservation of spare parts.

Assist with coordination of specialized vendors and third‑party maintenance services.

Maintenance Planning & CMMS

Provide feedback to planners and CMMS (Computerized Maintenance Management System) superusers for scheduling improvement.

Update CMMS with detailed work order information.

Support continuous improvement of job plans, procedures, and maintenance strategies.

Ensure maintenance frequencies follow regulatory, and reliability best practices.

Serve as the engineering and technical point of contact for the offshore facility

Collaborates with operations, maintenance, & construction personnel to identify, develop & implement offshore brownfield projects

Organizes and leads cross-functional teams to address complex issues or technical activities

Coordinates offshore construction and complex maintenance support vendors to ensure the highest level of safety, environmental, quality, & regulatory performance.

Verifies offshore equipment is installed and operates within company specifications, applicable regulations, industry codes, & Recognized and Generally Accepted Good Engineering Practices (RAGAGEP)

Develops and reviews relevant engineering and construction execution documents such as P&IDs, Construction Execution Workpacks, Risk Assessments, Piping Isometrics, Execution Schedules, Commissioning, Startup & Operations Procedures

Works in collaboration with stakeholders to clearly define project scope and objectives during the project development phase

Reviews EPC Contractor deliverables and ensure consistency with Design Specification for assigned facilities

Drives small project execution schedules within operating requirements and company business

This position is responsible for interpreting Control Philosophies, Cause & Effects, P&IDs and developing, testing, documenting, and maintaining Rockwell ControlLogix PLC & FactoryTalk HMI based systems and Archestra System Platform object-based programs, templates, processes, and tools to manage and sustain programming code for offshore and high-pressure gas production facilities. Supports project activities including facility design, construction, commissioning, troubleshooting, managing, and maintaining SCADA, DCS, SIS, HMIs, PLCs, PCN Servers & Applications and Communication systems reliability and availability. Maintains SCADA data reporting systems, support Operations production reliability and optimization efforts and support PCN Information Risk Management (IRM) compliance. Train and mentor Operations and Maintenance personnel.