לוח משרות דרושים, לחיפוש זה נמצאו 34,276 משרות

Were looking for a Tech Lead to be the company-wide focal point for AI utilization, infrastructure, and security - across both our core compliance platform and the Agentic Suite. This is a hands-on technical authority role, not a management track: you'll lead a small team (2-5 engineers) while spending most of your time driving how the company builds with AI, not on people management. You'll report to the Agentic BU owner.

Responsibilities
Own the company's AI infrastructure - model access, tooling, evaluation, cost/performance tradeoffs - across all engineering teams.
Drive AI-native R&D transformation: bring agentic development practices into day-to-day engineering workflows, not just the product.
Own AI-related security posture: data handling, model/tool access control, secure use of third-party AI services.
Be the go-to technical authority other teams pull in when adopting AI tooling or agentic patterns.
Lead a small team (2-5 engineers) building and maintaining shared AI infra and tooling.
Identify workflow inefficiencies across R&D and drive the infra/tooling changes that fix them.

Required Acoustics Research Engineer
Why this role exists
Noise - not range, not cost - is what keeps aircraft out of cities. We exist because we believe an acoustic signature roughly four times lower than conventional eVTOLs changes what urban aviation is allowed to be, and this role sits at the exact center of that bet. You will own the methods that tell us, with numbers we can defend, how quiet the vehicle actually is - and where the next decibel comes from.
What you'll own:
Develop and validate source-noise prediction models for our novel lift and propulsion architecture, from first-principles aeroacoustics through empirically anchored corrections.
Design and execute acoustic measurement campaigns in anechoic facilities and at outdoor ranges, owning microphone array design, calibration chains, and data acquisition end to end.
Reduce rig and flight-test acoustic data into validated spectra, directivity maps, and component-level source rankings that directly drive vehicle design decisions.
Quantify community-noise exposure using EPNL, SEL, dBA, and tonality-corrected metrics, and translate the results into hard, testable requirements for design teams.
Build psychoacoustic models - loudness, sharpness, tonality, fluctuation strength - and run jury listening studies that connect physical metrics to human annoyance.
Run aeroacoustic simulations coupling CFD to acoustic analogy solvers (FW-H or equivalent), and reconcile predictions against measured data every design cycle.
Define and defend the vehicle noise budget at design reviews, allocating margins across subsystems and flagging acoustic risk before hardware is built.
Author measurement procedures, test reports, and model validation documents rigorous enough to anchor future certification arguments.

We are looking for a builder to join our Professional Services team. Someone who writes code, ships solutions, and looks for ways to automate repetitive work. Youll work directly with customers to implement, extend, and integrate our compliance platform built on Salesforce- and just as importantly, youll build AI-powered agents and internal tools that make the whole team faster. This is a hands-on technical role: youll write code, build integrations, migrate data, and solve problems that dont always come with a clear spec.

The work spans Salesforce development, Python scripting, and AWS-based workflows. You will work across multiple projects and customer environments, often picking up requirements on the fly and figuring out the best path forward independently.

To succeed here, you need to move fast, take ownership of problems before they're fully defined, and use AI tools as a natural part of how you build- not as an occasional shortcut, but as how you actually work.

Responsibilities:
Custom Development: Design and build Salesforce solution- including Apex, LWC, and integrations- based on customer requirements.
AI Agents & Internal Tooling: Design and build AI-powered agents and internal tools that improve how the team delivers- automating repetitive work, streamlining processes, and turning good ideas into working tools without waiting to be asked.
Build Python-based scripts and tools to support customer onboarding, automation, and data processing needs.
Use AI coding tools actively throughout your work- to move faster, explore unfamiliar territory, and deliver without waiting for fully defined specifications.
Translate customer requirements- sometimes vague, sometimes complex- into working Salesforce configurations, automated flows, and integrated solutions.
Collaborate with R&D, Product, and Customer Success to ensure new platform features land well in a services context.

Were looking for a hands-on builder and technical Product Manager to lead complex, core modules within our platform for the Life Sciences ecosystem.

In this role, youll work at the intersection of customer needs, business strategy, and technology. As part of our AI-forward product organization, you will leverage modern AI tools and vibe coding to accelerate early-stage prototyping and drive solutions through the full product lifecycle.

If you enjoy diving into complex backend architectures, validating ideas directly with enterprise clients, and using AI to turn concepts into practical prototypes - this role is for you.

Responsibilities
Drive End-to-End Product Initiatives: Take ownership of complex features and workflows from initial concept to launch and customer adoption.
Rapid AI Prototyping (Vibe Coding): Utilize modern AI tools to rapidly create functional prototypes, test concepts, and clarify requirements before full development.
Enterprise Customer Discovery: Work directly with stakeholders to uncover key operational challenges and validate proposed product solutions.
Technical & Architectural Collaboration: Partner closely with System Architects and R&D to define backend structures, API integrations, data modeling, and analytics.
Cross-Functional Alignment: Collaborate with Sales, Marketing, and Customer Success to align product capabilities with market strategy and business goals.

We are seeking a highly skilled Thermal Engineer to design, analyze, and optimize thermal management solutions across our products and systems. The ideal candidate will have strong analytical capability, hands-on experience with thermal simulation tools, and a solid understanding of heat transfer, fluid mechanics, and materials.
Key Responsibilities:
Design and develop thermal management systems, including cooling architectures, heat exchangers, and thermal interfaces.
Perform detailed thermal simulations (CFD, FEA) to predict temperature distribution, heat flow, and performance under various operating conditions.
Conduct experimental testing and validation of thermal components using lab equipment such as thermal chambers, calorimeters, sensors, and DAQ systems.
Evaluate thermal performance trade-offs and optimize designs for efficiency, cost, manufacturability, and reliability.
Collaborate with electrical, mechanical, and system engineering teams to integrate thermal solutions into products.
Create technical documentation including thermal models, test reports, and design guidelines.
Investigate thermal failures, perform root-cause analysis, and implement corrective actions.
Support prototype build and participate in Design Reviews.

We are seeking a Battery Testing Engineer to plan, execute, and analyze battery tests at the cell, module, and pack levels. This role is highly hands-on and data-driven, focusing on performance validation, safety testing, and reliability of battery systems throughout development and production phases.
Key Responsibilities
Develop and execute test plans for battery cells, modules, and packs, including performance, lifecycle, safety, and environmental testing.
Support prototype builds and validation testing.
Operate battery test equipment such as cyclers, thermal chambers, power supplies, load banks, and DAQ systems.
Analyze test data to evaluate capacity, efficiency, degradation, thermal behavior, and failure modes.
Define test procedures, acceptance criteria, and reporting formats in alignment with product requirements and standards.
Support abuse, stress, and safety testing (thermal, electrical, mechanical) in controlled lab environments.
Investigate test anomalies and failures, perform root-cause analysis, and support corrective actions.
Collaborate with mechanical, electrical, and thermal engineers to correlate test results with design assumptions.
Maintain test documentation, lab records, and calibration status of equipment.

We are seeking an experienced Vice President of R&D to lead our multidisciplinary research and development efforts. Based at our Sderot HQ, this executive role is central to developing and scaling our battery and thermal management technologies. The VP will manage all R&D functions-including thermal systems, heat transfer, mechanical design, control algorithms, and data analysis-ensuring alignment with our business strategy and product roadmap
Key Responsibilities
StrategicLeadership: Define and drive the R&D roadmap in alignment with commercial, product, and operational goals.
Technology Development: Lead development of our core technologies, including advanced battery modules and two-phase thermal systems.
Cross-Functional Collaboration: Work closely with Product, Project Management, Procurement, and Admin to ensure seamless development and delivery cycles.
Team Building & Mentorship: Recruit, grow, and lead a high-performing team of engineers and scientists.
Execution Excellence: Manage product development from proof of concept through TRL 6+ validation and certification (IATF, DNV).
IP Strategy & Compliance: Oversee patent filings and ensure compliance with regulatory and industry standards.
Customer & Partner Engagement: Lead technical engagement with OEMs, Tier 1s, and partners to support development milestones, PoCs, and product integration.

We are seeking a Product-Oriented Mechanical Engineer to lead the mechanical design and development of battery systems, from concept through production release. This role emphasizes robust, manufacturable design of battery modules and systems, and hands-on support through prototyping, validation, and industrialization.
Key Responsibilities:
Design and develop mechanical architectures for battery modules and systems, including enclosures, frames, compression systems, mounts, and safety features.
Own mechanical design from concept, detailed design, and prototyping through DVT/PVT and production release.
Define and manage mechanical requirements related to strength, vibration, shock, sealing, thermal interfaces, and serviceability.
Perform structural and fatigue analysis (FEA) to validate designs against automotive, marine, or industrial standards.
Collaborate closely with thermal, electrical, and systems engineers to ensure proper integration of cells, busbars, thermal systems, and electronics.
Support battery safety design, including mechanical protection, cell retention, venting paths, and abuse mitigation features.
Support prototype builds and root-cause analysis during testing and production ramp-up.
Generate and maintain detailed drawings, BOMs, and engineering documentation.

Required CAD & CAE Engineer
Location: Sderot, Israel (On-site)
Key Responsibilities:
Create and modify CAD models (parts and assemblies) to support design iterations and optimization.
Develop and execute simulation models to evaluate structural, thermal, and Multiphysics performance.
Perform analyses including static, dynamic, vibration, fatigue, and nonlinear simulations.
Drive simulation-informed design changes, improving performance, weight, cost, and reliability.
Collaborate with mechanical, thermal, electrical, and system engineers to define requirements and integrate subsystems.
Build and validate high-fidelity models, including material definitions, contacts, and realistic boundary conditions.
Correlate simulation results with experimental/test data and refine both models and designs.
Support product development from concept through prototyping, validation (DVT/PVT), and production.
Apply DFM/DFA principles to ensure designs are manufacturable and scalable.
Generate engineering drawings, GD&T, and documentation for production release.