לוח משרות דרושים

our company's Autonomous Driving software group in Haifa is looking for a Linux kernel developer who will be responsible for developing embedded SW products. This is an exciting opportunity to work with highly talented engineers and be a part of product innovation on cutting edge technologies.
What will your job look like?
Researching, designing, and implementing new SW drivers and Operating System features, as well as, maintaining, and enhancing existing ones.
You will also be responsible for integrating the SW solutions in our company's Embedded automotive platforms including the necessary HW bring-up, debug and unit testing to achieve proper operation of the new SW and HW together.

We're looking for a Threat Detection Researcher to join the Threat Research team
WHAT YOULL DO

Design behavioral baselines for complex cloud environments using diverse signals, and develop high-fidelity detections based on those baselines.
Expand detection engine with novel and high-impact telemetry sources, pushing the boundaries of what can be detected in modern cloud environments.
Conduct deep technical research into complex cloud services to uncover novel attack vectors.
Investigate real-world attacks across cloud environments, identity providers (IDPs), and infrastructure-as-a-service (IaaS) platforms.
Hunt and analyze emerging threats and active campaigns targeting cloud ecosystems.

our company's Autonomous Driving software group in JLM is looking for a Linux kernel developer who will be responsible for developing embedded SW products. This is an exciting opportunity to work with highly talented engineers and be a part of product innovation on cutting edge technologies.
What will your job look like?
Researching, designing, and implementing new SW drivers and Operating System features, as well as, maintaining, and enhancing existing ones.
You will also be responsible for integrating the SW solutions in our company's Embedded automotive platforms including the necessary HW bring-up, debug and unit testing to achieve proper operation of the new SW and HW together.

The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

Were looking for a top-notch Threat Detection Researcher to join our team
WHAT YOULL DO

Develop detections and tools to protect customers from cloud threats
Investigate attacks on cloud environments and malware targeting cloud workloads
Hunt and analyze real-world attacks and emerging cloud threats
Collaborate closely with the R&D team to transform research insights into product features
Work with customers in response to requests related to suspicious activity or potential incidents
Create best practices and security policies based on research findings
Deliver external-facing content (blog posts and talks at security conferences) based on security insights and novel research

We're looking for an experienced Website Developer to join our expanding R&D team
WHAT YOU'LL DO

Help bring content to prospective customers, showcasing the platform features and strengths, in a delightful & educating experience.
Build new user-facing features with beautiful and scalable UI components, for website, docs and future mini-sites, while choosing the best-fitting technologies.
Collaborate closely with other developers, as well as with the Product, Marketing, and UX teams to understand the business needs and translate goals into effective designs and infrastructure.
Be the owner of the wiz.io site and docs portal to ensure code quality, performance, and scalability of our website.

The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

The company's EyeC VLSI team designs chips for RADAR systems used in ADAS and autonomous vehicles. Our Physical Design team operates in a startup-like environment, emphasizing technical expertise, execution, and ownership. Each engineer in the Physical Design team takes full responsibility for their work, from initial definition through execution and final sign-offs. Engineers collaborate closely with design and architecture teams to develop constraints, conduct design reviews, and implement RTL modifications to ensure convergence. We are seeking an Experienced Backend to join our growing Physical Design team. In this role, you will play a key part in the design of state-of-the-art SoCs, from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

our company's EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars. Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Experienced Physical Design Engineer to join the growing Physical Design Team, responsible for developing our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.

Our vision is to enable the autonomous vehicle dream with best in class, cutting-edge, imaging radar. We are looking for an Experienced RFIC/MMWIC Engineer to join the development of the next generation of RF silicons that are part of a Software Defined Radar. The group hosts a diverse team of scientists, engineers and developers to research, realize and bring to market innovative new silicons. You will be part of a winning RF design team in a fast-paced startup-like environment, working on many different RF and analog components of the RF silicons in the most advanced nano-scale Technologies.
What will your job look like?
R&D of RF chip design in a mass production process.
Time + Frequency domain analysis of RF circuits.
Complete the Design process from spec review to design and lab support.
Design of different RF passive and active structures in the chip level.
Interface with RF architects, hardware designers and test engineers.

The RFIC/Analog design groups in our company's Radar organization is responsible for developing the cutting edge Transceivers in mmW frequencies for the best Imaging Radar technology. The design process includes the entire process from specs to productization. To support these challenging processes, we need a skilled CAD team that will work with the design teams on all design aspects and flows from design environment setups, through design tools implementations and support and to chip level verifications and validation enablement. We're looking for an Experienced CAD or Design Automation Engineer to develop our company's RF/Analog design tools/flows and automation flows for the next-generation Imaging Radar chips.
What will your job look like:
Build and support RF/analog design environments
Implement, develop, and maintain design flows, tools and scripts.
Evaluate and explore new automation technologies and advocate for efficiency improvements
Evaluate multiple vendor solutions and guide execution, in the most optimal use, based on design needs
Effectively communicate and support a large number of designers, providing high-quality tools and flows, documentation, and presentations.

The RFIC/Analog design groups in our company's Radar organization is responsible for developing the cutting edge Transceivers in mmW frequencies for the best Imaging Radar technology. The design process includes the entire process from specs to productization. To support these challenging processes, we need a skilled CAD team that will work with the design teams on all design aspects and flows from design environment setups, through design tools implementations and support and to chip level verifications and validation enablement. We're looking for an Experienced CAD or Design Automation Engineer to develop our company's RF/Analog design tools/flows and automation flows for the next-generation Imaging Radar chips.
What will your job look like:
Build and support RF/analog design environments
Implement, develop, and maintain design flows, tools and scripts.
Evaluate and explore new automation technologies and advocate for efficiency improvements
Evaluate multiple vendor solutions and guide execution, in the most optimal use, based on design needs
Effectively communicate and support a large number of designers, providing high-quality tools and flows, documentation, and presentations.

our company's Autonomous Driving Software Group in looking for an experienced Linux Kernel & Security Developer to design and implement secure embedded software solutions. This is an exciting opportunity to work with highly talented engineers and contribute to cutting-edge security innovations in automotive technologies
What will your job look like?
You will research, design, and implement Linux kernel drivers and OS features, ensuring compliance with security best practices.
Maintain and enhance existing kernel components while mitigating potential vulnerabilities.
Integrate embedded software solutions in our company's automotive platforms, including HW bring-up, debugging, and unit testing.
Conduct threat modeling, penetration testing, and vulnerability assessments for Linux-based embedded systems.
Optimize memory management, I/O, networking, and storage security within the Linux kernel.