דרושים » ייצור ותעשייה » Manufacturing Engineer

We are looking for an NPI Engineer for the R&D team. The NPI Engineer will own the end-to-end transition of multidisciplinary medical devices from R&D prototypes to stable, scalable serial production, serving as the bridge between product development and Operations.

If you want to work in an innovative, international environment and help push the boundaries of healthcare, well-being, and energy-based technology, this is your opportunity!


Key responsibilities:

Lead the full NPI and design-transfer process from R&D handoff through pilot builds, qualification, production ramp-up, and stabilization.

Build and drive transfer plans, schedules, risk and action tracking, production-readiness criteria, and release gates.

Create and maintain the manufacturing package, including BOM/DMR content, drawings, work instructions, test methods, acceptance criteria, tooling, and training materials.

Lead DFM, DFA, and DFT reviews and drive design and process improvements that support quality, manufacturability, serviceability, and cost.

Define, develop, and qualify manufacturing processes, fixtures, equipment, and test setups; prepare and execute validation protocols where applicable.

Lead ECOs and configuration changes, and provide hands-on support for production, yield, quality, field, and obsolescence issues using structured root-cause and corrective-action methods.

Serve as the technical focal point across R&D, Operations, QA/RA, Supply Chain, Service, suppliers, subcontractors, and contract manufacturers.

We are a fast-growing international medical device company that develops and manufactures innovative medical equipment. We are looking for a Process Engineer to join our Manufacturing Engineering team. Job Description: The Process Engineer will lead engineering changes and qualify manufacturing processes - on our production floor and at our subcontractors in Israel and abroad - while providing hands-on Technical Support to production. Lead engineering changes (ECOs) end-to-end, from definition and impact assessment, through implementation on the production floor, to formal closure. Plan and execute process verification and validation activities, including IQ/OQ/PQ protocols and reports. Lead process qualification at subcontractors in Israel and abroad, including new and replaced equipment and production lines. Support injection molding activities: DFM reviews with the molder, mold qualification and evaluation of samples. Provide hands-on engineering support to production and final TEST lines, and define jigs, fixtures and process parameters. Conduct technical investigations and root cause analysis as part of the NCMR process, and drive corrective actions to closure. Develop, improve and optimize manufacturing and assembly processes, based on production and yield data. Work closely with Production, Quality, Regulatory, R&D and Purchasing, and manage internal and external stakeholders. Direct Manager: Engineering Manager.

A fast-growing international medical device company that develops and manufactures innovative medical equipment. We are looking for a Process Engineer to join our Manufacturing Engineering team.
Job Description:
The Process Engineer will lead engineering changes and qualify manufacturing processes - on our production floor and at our subcontractors in Israel and abroad - while providing hands-on technical support to production.
Lead engineering changes (ECOs) end-to-end, from definition and impact assessment, through implementation on the production floor, to formal closure.
Plan and execute process verification and validation activities, including IQ/OQ/PQ protocols and reports.
Lead process qualification at subcontractors in Israel and abroad, including new and replaced equipment and production lines.
Support injection molding activities: DFM reviews with the molder, mold qualification and evaluation of samples.
Provide hands-on engineering support to production and final test lines, and define jigs, fixtures and process parameters.
Conduct technical investigations and root cause analysis as part of the NCMR process, and drive corrective actions to closure.
Develop, improve and optimize manufacturing and assembly processes, based on production and yield data.
Work closely with Production, Quality, Regulatory, R&D and Purchasing, and manage internal and external stakeholders.
Direct Manager: Engineering Manager.

We are looking for a Technical Project Engineer for the Engineering team. The Technical Project Engineer will be responsible for leading Engineering projects for cost-reduction & sustain engineering

If you want to work in an innovative, international environment and help push the boundaries of healthcare, well-being, and energy-based technology, this is your opportunity!

Main Duties:

Leading Advanced Engineering Projects for Medical multidiscipline system, focusing on value engineering and BOM (Bill of Material) cost-reduction efforts.

Leading E2E (End-2-End) Projects ECO's, from PoC/E (Proof of Concept/Experiment) thought design & Testing (V&V), up to NPI and Production implementation.

Write and Execute Design Verification Testing (V&V) for cost-saving & Sustain engineering projects.

Updating/Creating the BOM & DMR of the System within project in the PLM system.

Write and Execute Manufacturing Validation Testing (PV/MP) from planning through execution & implementation in production sites.

Quality Gate Keeper ensuring overall device safety, efficacy and compliance are withstanding the overall system quality level.

Rapid Medical is a fast-growing medical device company focused on developing, manufacturing, and selling innovative devices for endovascular interventional procedures. We are looking for a talented and creative engineer to join our R&D team and be a key player in our future development. LOCATION: Yokneam, Israel
SCOPE & RESPONSIBILITIES:
* Design and develop innovative neurointerventional medical devices as part of the R&D team.
* Plan and execute verification tests for new prototypes and new products
* Prepare product documentation, including DHF and DMR
* Analyze test results and author detailed engineering reports
* Collaborate with Quality and Regulatory Affairs to ensure design control compliance
* Lead design transfer activities, support pilot production, and transition products into manufacturing

Our New Product Introduction (NPI) team is growing, and we're looking for a highly motivated and diligent Engineering Vendor Manager to join us. In this critical role, you'll be responsible for the engineering project management of our most strategic and technologically advanced components and suppliers, ensuring on-time delivery of the highest quality and reliability of components for our groundbreaking products.


What you'll be doing:
Manage the product as a project - Define the timeline for having our designs out, manage quality meetings, set full road map for quality, capacity and automation as readiness towards HVM.
Lead engineering engagement with strategic and critical suppliers for new product introductions (NPI) and ongoing production, identify potential risks, critical parameters, and areas for optimization.
Define and implement clear monitoring and documentation requirements for key process steps to ensure consistency and quality.
Establish comprehensive quality criteria and outgoing quality control (OQC) procedures at suppliers prior to shipment.
Monitor and analyze supplier yield data, production metrics, and quality performance to identify trends and drive corrective actions.
Lead and align our internal engineering teams (Design, Product, Reliability, Quality) - teams that do not report to you - to ensure supplier capabilities align with product requirements and committed timelines.
Conduct supplier technical audits and provide mentorship on standard processes in manufacturing and quality control.
Own issues end to end - drive the investigation to root cause and come to the table with a recommended solution, an implementation plan, and an owner, not only with a flagged problem.

Our New Product Introduction (NPI) team is growing, and we're looking for a highly motivated and diligent Engineering Vendor Manager to join us. In this critical role, you'll be responsible for the engineering management of our most strategic and technologically advanced suppliers, ensuring the highest quality and reliability of components for our groundbreaking products.

Our Networking division is a leading supplier of innovative end-to-end NVLINK, InfiniBand and Ethernet connectivity solutions and services for servers and storage. We offer market-leading solutions that include adapter cards, switches, cables, and software to support networking technologies. Our products optimize data center performance, using our AI solution and deliver industry-leading bandwidth and scalability. In addition, we serve a wide range of sectors, including high-performance computing, enterprise, data centers, cloud computing, big data, and Web 2.0.

What you'll be doing:
Lead engineering engagement with strategic and critical suppliers for new product introductions (NPI) and ongoing production, identify potential risks, critical parameters, and areas for optimization.
Define and implement clear monitoring and documentation requirements for key process steps to ensure consistency and quality.
Establish comprehensive quality criteria and outgoing quality control (OQC) procedures at suppliers prior to shipment.
Monitor and analyze supplier yield data, production metrics, and quality performance to identify trends and drive corrective actions.
Collaborate closely with internal engineering teams (Design, Product, Reliability, Quality) to ensure supplier capabilities align with product requirements.
Drive continuous improvement initiatives at suppliers to enhance process control, yield, and overall product quality.
Conduct supplier technical audits and provide mentorship on standard processes in manufacturing and quality control.
Act as the primary technical interface between us and strategic suppliers, resolving complex engineering challenges.

We are looking for a passionate and dynamic Mechanical Engineer, with a hands-on approach, to join our R&D team.

The role involves the research and development of robotic mechanisms incorporating motors, gears and sensors, from concept to mass production.



Responsibilities:

Design and develop complex robotic mechanisms and assemblies from concept through production.

Lead mechanical development activities across the full product lifecycle, including concept generation, detailed design, prototyping, drawing release, manufacturing support, integration and verification.

Define and execute test and validation methodologies to confirm design performance and compliance with engineering requirements.

Generate and maintain high-quality engineering documentation, including requirements, calculations, design reviews, protocols, reports, and change orders.

Collaborate closely with cross-functional stakeholders including systems engineering, software, electronics, manufacturing, quality, and operations.

Manage technical interactions with suppliers and support component sourcing, qualification, and manufacturability activities.

We're a global team of creative experts, bringing our unique backgrounds and bold ideas to push boundaries and help each other grow. Because full product development-from design to qualification to production-is within our team, were able to think differently, experiment more, and work quickly. Join us to power the future of the digital world.


YOUR IMPACT

Build, lead, and mentor a team of mechanical design engineers responsible for Engineering Validation Board (EVB) mechanical development.

Define team priorities, project plans, and resource allocation in collaboration with Hardware Program Managers and cross-functional engineering teams.

Lead the mechanical design of complex EVBs, including board-level mechanics, fixtures, thermal solutions, structural components, and lab infrastructure.

Drive Design for Manufacturing (DFM), Design for Assembly (DFA), and Design for Test (DFT) to ensure efficient prototype builds and engineering validation.

Develop innovative mechanical concepts to support aggressive product development schedules and multiple concurrent programs.

Partner closely with Electrical Engineering, PCB Layout, Signal Integrity (SI), Power Integrity (PI), Thermal Engineering, Packaging, and Contract Manufacturers throughout the product lifecycle.

Support prototype assembly, debugging, validation, and bring-up activities, ensuring rapid issue resolution.

Lead root cause investigations, failure analysis, and corrective actions for mechanical and assembly-related issues.

Perform design reviews, risk assessments, and implement mitigation plans to improve product quality, reliability, and execution.

Define and continuously improve mechanical design methodologies, engineering processes, and best practices for EVB development.

Work closely with external suppliers and contract manufacturers to ensure manufacturability, quality, cost optimization, and schedule execution.

As an R&D Mechanical Engineer at Augury, you will own the design of new parts and assemblies, design parts for machining and injection molding, perform analytical calculations and V&V tests.

Youll work closely with mechanical, hardware, V&V, sustain, manufacturing, and external sub contractors, to deliver innovative, reliable, and scalable IoT devices.

A Day In Your Life
Design mechanical parts and mechanisms, for highly challenging environments, from initial concepts, through all design phases, until transfer to production.
Master 3D CAD models and drawings for mechanical components, assemblies, jigs, and fixtures (including release management and GD&T).
Design for plastics: mostly parts for injection molding, compression and other classical manufacturing methods.
Run prototype validation: mechanical inspection, stress testing, sealing, field testing and support high level system validation procedures.
Cooperate with multidisciplinary teams (HW, V&V, FW, Algo), utilizing analytical thinking and strong theoretical background.
Transfer parts for production, in collaboration with the engineering team, and following product lifecycle methodologies.
Work with subcontractors and vendors in Israel and internationally.