דרושים » חומרה » R D Hardware Engineer ( board designer )

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 18 שעות
Location: More than one
Job Type: Full Time and Hybrid work
Primary Duties and Responsibilities:

> Design and develop complex boards
> Define Requirements, engineering specs and Validation documents
> Select major components, lead layout and placement using contractors
> Perform Bring-Up tasks, validate design, support transition to manufacturing, support the boards in their life cycle
Requirements:
> B.Sc. in Electrical Engineering
> At Least 3 years of proven experience in board design
> Good knowledge of analog and digital electronics
> Excellent level of system Engineering - ability to dissect and analyze high level requirements into digital and analog boards architecture and requirements
> Excellent knowledge of relevant CAD tools - OrCAD, Allegro
> FPGA design Knowledge
> Experience with motion and control systems - advantage

Personal skills
o Excellent interpersonal skills
o Ability to work in a team of engineers in multi-disciplinary environment
o Innovative and creative in solving complex problems
o Fluent in English, both writing and speaking
This position is open to all candidates.
 
Hide
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8751891
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
1 ימים
דרושים בהיי סק מעבדות בע"מ
Job Type: Full Time
At High Sec Labs (HSL), a global leader in cybersecurity and secure connectivity solutions, we are looking for a talented Electronics Engineer to join our advanced development team.
About the Role:
As part of our hardware group, you will take an active role in developing cutting-edge electronic products in the communication and cybersecurity domains. The role involves end-to-end board design, bring-up of new products, and integration of complex systems combining RF circuits, analog components, processors, and FPGAs.
Key Responsibilities:
Design, bring-up, and validation of electronic boards and systems.
Integration of RF, analog, digital, and FPGA-based circuits.
Debugging, troubleshooting, and improving existing products.
Close collaboration with multidisciplinary teams, including software and system engineers.
Supporting the full product lifecycle from concept to production.
Requirements:
Requirements:
B.Sc. in Electronics / Electrical Engineering.
Minimum 5 years of relevant industry experience (experience in the defense sector - an advantage). Hands-on experience in board design, bring-up, and debugging.
Strong problem-solving skills and ability to work independently.
Self-motivated, fast learner, and team player.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8709675
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
2 ימים
חברה חסויה
Location: Netanya
Job Type: Full Time
Join us as a Hardware Board Design Engineer, where you will contribute to complex design projects and the development of cutting-edge communication systems. In this role, you will design high-performance boards for advanced avionics systems, working as part of a professional hardware design team. Your expertise will drive innovation and ensure the highest standards of quality in our products.

Responsibilites
End to end boards design.
Starting from the component's selection and evaluation, schematic design, thermal considerations, mechanical constraints.
Layout design, production supervision, bring-up on lab.
Including all the relevant document writing and conducting the design reviews needed until the product is finished.
Leading products from the definition until their release.
Supporting production when needed.
Requirements:
Education:
BSc/MSc in Electrical/Electronics-Engineering from a known institute.
Experience and skills:
Electronics Engineer. 3+ years of board design. Proven experience in complex work with multilayer boards.
Knowledge and experience with digital circuits and interfaces, Memories interfaces, Microprocessors, DSP.
Knowledge and experience with analog circuits, DC/DC, ADC, amplifiers.
High knowledge of Layout design considerations, power planes, critical circuits, noise filtering, and crosstalk avoidance techniques.
Experience in circuit trouble shooting and bring-up working together with SW teams.
Modeling and simulation experience.
Understanding of EMI / EMC concepts.
Ability to understand product requirements and industry standards demands.
Ability to write specification documents, technical reports, design verification documents.
Good knowledge of Schematic design tools (Orcad preferred, not exclusive), very good handling of Office environment; Wide knowledge of lab equipment.

Personal Requirements:
Excellent teamwork skills and ability to interface with various levels of technicians, engineers, suppliers and manufacturing.
Ability to work under pressure with high sense of responsibility and strong commitment to due dates.
Highly organized, able to work independently with limited supervision, including working with and supervising external subcontractors (mechanical, layout designers).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8748077
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
1 ימים
Location: Haifa
Job Type: Full Time
We are seeking a highly experienced and passionate Senior Board Design Engineer to spearhead the development of next-generation hardware platforms built around Annapurna's state-of-the-art devices. The ideal candidate thrives on tackling complex technical challenges and brings extensive expertise in high-speed digital, power, and embedded system board design.

In this role, you will lead the design and development of complex electronic boards - from system architecture and component selection, through schematic capture, PCB layout oversight, board bring-up, validation, and debugging.
You will collaborate closely with cross-functional teams - including software, ASIC, mechanical, and system engineering - to ensure seamless integration and successful product delivery. As the technical focal point for your projects, you will provide technical leadership, make key design decisions, and drive engineering excellence.


Key job responsibilities
Lead the architecture, design, and development of complex high-speed and mixed-signal boards.
Define board-level architectures and select appropriate components based on system requirements.
Create detailed schematics and guide PCB layout activities, ensuring signal integrity, power integrity, manufacturability, and reliability requirements are met.
Perform board bring-up, debugging, validation, and root-cause analysis using advanced laboratory equipment.
Drive technical decision-making and act as the primary hardware design authority for assigned projects.
Review designs and provide technical mentorship to other engineers.
Ensure designs meet performance, quality, schedule, and cost objectives.
Requirements:
Basic Qualifications
- B.Sc. in Electrical Engineering from a recognized university.
- At least 10 years of proven hands-on experience in high-speed digital, power, and embedded system board design.
- Extensive experience in schematic capture and PCB layout reviews.
- Strong hands-on experience with laboratory equipment, including oscilloscopes, spectrum analyzers, and network analyzers.
- Deep system-level understanding with strong analytical and troubleshooting skills.
- Ability to work effectively in a multidisciplinary environment and collaborate across engineering disciplines.
- Self-driven and capable of making independent technical decisions within areas of expertise.
- Proactive and adaptable, with the ability to thrive in a fast-paced environment while maintaining high-quality deliverables.

Preferred Qualifications
- Experience with DDR4 and DDR5 memory subsystem design and validation.
- Experience with PCI Express Gen5 and newer standards.
- Familiarity with signal integrity and power integrity analysis methodologies.
- HDL (Verilog/VHDL/SystemVerilog) development or debugging experience.
- Experience with high-speed interfaces, FPGA-based systems, and complex embedded platforms.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8749551
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
05/07/2026
חברה חסויה
Location: Haifa
Job Type: Full Time
We are looking for an experienced Board Design Engineer to support the design and development of complex mixed-signal and high-speed digital boards for advanced medical systems. You will join our multidisciplinary team in CT organization.
Your role :
Design and develop multi-layer high-speed PCBs and define layout constraints
Perform component selection and schematic design
Design power management circuits (including DC-DC converters and power distribution)
Design and support analog circuits and boards
Support EMC/EMI tests
Lead board bring-up, validation, and lab debugging. Troubleshoot system-level HW/FW issues
Support high-speed interfaces such as DDR4/DDR5, PCIe, and Ethernet
Support Install Base (IB) activities , field investigations, and NPI activities
Support Lifecycle Management (LCM) tasks, including EOL handling
Work with PCBA vendors on production, manufacturing issues, and yield improvements
Search for component alternatives, test and approve replacements
Work with PLM (Product lifecycle Management) system and support ECO creation and release
Requirements:
Bachelor's degree in Electrical Engineering
7+ years of experience in board design working on multidisciplinary products
Experience in board design tools, preferably Siemens EDM / Xpedition
Deep understanding of Signal Integrity (SI) and Power Integrity (PI)
Experience in digital circuits design, power design, and analog circuit design
Strong lab debugging & root-cause analysis skills using tools such as oscilloscopes and signal analyzers for problem solving.
Experience with DDR design constraints and validation
Familiarity with PLM tools, especially Windchill
Advantages
Experience with FPGA-based systems
Experience in medical devices or other regulated industries
Background in thermal design and power optimization
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8723261
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
05/07/2026
חברה חסויה
Location: Haifa
Job Type: Full Time
We are looking for an experienced FPGA Design Engineer who will play a pivotal role in developing , designing and optimizing FPGA solutions for our cutting-edge projects. Your expertise will drive innovation and excellence in digital design as part of the detection team in CT\AMI.
Your role :
Develop FPGA logic using VHDL / Verilog
Design and implement high-speed data paths and interfaces such as DDR, PCIe, Ethernet.
Perform simulation, verification, timing closure, and debugging
Integrate FPGA with soft processors (such as MicroBlaze / Nios), sensors, ADCs/DACs, and other system components
Support system bring-up, lab validation, and debugging at both board and system level
Collaborate closely with hardware, firmware, software, and system teams
Support and participate in architecture discussions and design reviews
Read and understand board schematics to support integration and troubleshooting
Support digital component replacement activities, including identifying alternatives and validating implementation impact
Perform lab and system-level testing after component changes or design updates
Document FPGA design, interfaces, and implementation details
Support release processes in PLM (Product lifecycle Management) system , including documentation updates and design release activities
Requirements:
Bachelor's degree in Electrical Engineering
6+ years of hands-on FPGA design experience, in a multidisciplinary industry.
Strong experience in digital logic design and debugging
Strong knowledge of VHDL / Verilog
Experience with Xilinx tools, especially Vivado
Knowledge and experience with high-speed serial interfaces (such as: Ethernet, DDR) and protocols like AXI.
Familiarity with high-speed interfaces and memory systems
Ability to read and understand system schematics
Experience with lab debugging and validation
Ability to document design work clearly and support structured release processes
Familiarity with Windchill and engineering release workflows
Advantages
Experience with UVM or other verification methodologies
Background in imaging systems or signal processing
Experience in medical devices or other regulated industries
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8723850
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Netanya
Job Type: Full Time
we are looking for a Electronic Engineer.
This position is a key part of the engineering department that is responsible for multidisciplinary products through the Product Life Cycle (PLC).
The position involves extensive communication with local and worldwide R&D departments, parties in operation, subcontractors, production floors, and others.
The company is based in Netanya.
Responsibilities:
Lead the HW change on new and legacy products (EOL, Layout update)
Leads DFx and NPI procedures for new products
Leads failure analysis and reliability testing on all critical aspects of product design
Components engineer for new and existing products
Support projects and teams to ensure the design of new and existing products meet quality and reliability and apply validation tests to ensure products meet company standards
Support local and worldwide production floors
Published effectively report results to peers and management
Leads compliance Safety and Radio
Manage the Spec and requirements of the Battery and NFC
Requirements:
B.Sc. in Electronics Engineering is a must
Deep understanding of electronic design and DFM - must
Understanding multidisciplinary products design
At least 5 years of experience with worldwide compliance / regulations - must
Knowledge in electronics components, PCB and PCBA design and assembly process, batteries, radio frequency (RF), IR, testing methods, and knowledge in ATE (Automatic Test Equipment)
At least 5 years of experience in board design with Altium or OrCAD - Advantage
Communication skills verbal, written, and presentation skills in both Hebrew & English is must.
Experience in matrixed worldwide organization and ability to work well in a team environment including cross-culture.
Self-motivated and organized.
Ability and willingness for hands-on assignments
Required Skills:
Accountability, Communication, Electrical Engineering
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8723029
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
2 ימים
חברה חסויה
Location: Netanya
Job Type: Full Time
We are seeking a System Engineer for Precision Tracking to join its R&D team. This role is suited for an experienced engineer with a strong system-level perspective, combining technical leadership, multidisciplinary coordination, and active involvement in the development of advanced tracking systems.

Responsibilites
Overall responsibility for precision tracking technical project management at R&D including planning and monitoring of all R&D activities, planning and monitoring of project R&D budget (material and hours), lead of technical activities with the customer including design reviews, acceptance testing and system assimilation.
Overall responsibility of the system level architecture of complex systems.
Overall responsibility for System, Software and Hardware level specifications and requirements.
Overall responsibility and active participation in the Integration and Proof of Design phases.
Overall responsibility for electrical connectivity design between LR.
Requirements:
Education:
BSc/MSc in Electrical/Electronics-Engineering from a known institute.
ME in System Engineering - advantage.

Experience and skills:
2 years' experience as part of a development team for multi-disciplinary projects.
Experience in Project Management during entire project life cycles.
Experience in writing Requirements and Specification documents, in English
Experience in complex system architecture design
Troubleshooting Experience
Open minded and flexible with high self-teaching skills
Team player who can matrix manage
Fluent in English - speaking, writing, reading.
Knowledge & experience in SATCOM systems - Advantage.
Knowledge in servo and control algorithms, mechanical design, RF communication and RT software - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8748098
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
2 ימים
חברה חסויה
Location: Netanya
Job Type: Full Time
We are seeking a System Engineer for Precision Tracking to join its R&D team. This role is suited for an experienced engineer with a strong system-level perspective, combining technical leadership, multidisciplinary coordination, and active involvement in the development of advanced tracking systems.

Responsibilites
Overall responsibility for precision tracking technical project management at R&D including planning and monitoring of all R&D activities, planning and monitoring of project R&D budget (material and hours), lead of technical activities with the customer including design reviews, acceptance testing and system assimilation.
Overall responsibility of the system level architecture of complex systems.
Overall responsibility for System, Software and Hardware level specifications and requirements.
Overall responsibility and active participation in the Integration and Proof of Design phases.
Overall responsibility for electrical connectivity design between LR.
Requirements:
Education:
BSc/MSc in Electrical/Electronics-Engineering from a known institute.
ME in System Engineering - advantage.

Experience and skills:
2-4 years' experience as part of a development team for multi-disciplinary projects.
Experience in Project Management during entire project life cycles.
Experience in writing Requirements and Specification documents, in English
Experience in complex system architecture design
Troubleshooting Experience
Open minded and flexible with high self-teaching skills
Team player who can matrix manage
Fluent in English - speaking, writing, reading.
Knowledge & experience in SATCOM systems - Advantage.
Knowledge in servo and control algorithms, mechanical design, RF communication and RT software - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8748132
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
23/06/2026
חברה חסויה
Location: Yokne`am
Job Type: Full Time
Our Product Engineering group is looking for a highly motivated Hardware Engineer to lead Change Impact Analysis activities related to engineering design changes (ECOs/ECRs) across our cutting-edge networking and computing platforms. This role is critical to ensuring that all product modifications are seamlessly evaluated for their impact on hardware, mechanical design, system performance, and test coverage across the product lifecycle. You will work closely with R&D, mechanical engineering, manufacturing, quality, and test teams to assess risks, define mitigations, and maintain excellence in product integrity and testability.


What Youll Be Doing:

Review and define impact of engineering change ECO/ECR) across complex hardware systems.

Evaluating the impact of component, layout, and mechanical changes on hardware functionality, manufacturability, and testability.

Define alternative sources of components for products and products test stations.

Collaborating with cross-functional teams to ensure smooth implementation of changes without compromising product quality.

Supporting DFT (Design for Testability) requirements in the face of ongoing design changes.

Reviewing BOM and layout revisions and assessing ripple effects on power delivery, signal integrity, and thermal performance.

Maintaining change traceability and documentation to meet engineering and compliance standards.

Coordinating with manufacturing and operations teams to ensure product readiness and alignment with production timelines.
Requirements:
What We Need to See:

BSc or MSc in Electrical or Electronics Engineering (with exposure to mechanical systems - a plus).

4 years of HW hands-on experience with validation or systems\modules repair up to components level - NPI leadership starting from early design phase to mass production of complex products.

Preferably in server, networking, or embedded systems.

3+ years working with ECO/ECR processes, board/system-level design, or sustaining engineering and or hands on systems\modules repair up to components level - preferred!

Solid understanding of mechanical interfaces, thermal considerations, and their influence on electronic systems.

Familiarity with DFT principles, signal integrity concepts, and production test environments.

Strong analytical skills, attention to detail, and ability to handle multiple change requests in parallel.

Excellent written and verbal communication skills in English.


Ways to stand out from the crowd:

Solid knowledge with products production process: SMT, assembly and tests (ICT, JTAG, functional tests.

experience in Agile PLM - advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8707261
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
2 ימים
חברה חסויה
Location: Netanya
Job Type: Full Time
We are looking for a Solutions Engineer to join our growing Earth Observation, Tracking, Telemetry & Command (TT&C), New Space and Integrated Solutions business line, working closely with our Sales and Engineering teams.

In this role, you will act as a technical subject matter expert (SME), leading customer engagements, defining system architecture, preparing proposals, and delivering technical presentations.

You will leverage your skills and expertise to tailor solutions that meet mission-critical customer requirements in the ground systems and integrated solutions sectors.

This is a key technical-commercial position, directly influencing the company's ability to win new business and expand into emerging markets.

Responsibilities
Act as a technical authority for multidisciplinary systems involving mechanics, electronics, software, and RF communication.
Lead technical engagements with prospects and customers: requirements gathering, solution design, system architecture, block diagram development, and technical risk assessment.
Prepare and deliver high-quality proposals:
Analyze customer specifications, SOWs, and RFPs.
Develop competitive solution concepts, costing, and technical documentation.
Perform technical risk analysis and competition analysis.
Work with the Sales team by conducting technical presentations and demonstrations that articulate the features and advantages of company solutions.
Collaborate with subcontractors, third-party partners, and internal stakeholders (engineering, finance, operations, executive team) to develop winning solutions.
Maintain deep knowledge of the companys product portfolio, new technologies, and evolving industry trends.
Support continuous improvement of proposal generation processes, tools, templates, and best practices.
Perform Link Budget Analysis and basic RF performance assessments as part of solution definition.
Mentor and support internal sales associates to enhance their technical understanding and customer engagement capabilities.
Participate in product strategy discussions by providing technical market feedback to influence future developments.
Requirements:
Mandatory Qualifications and Skills:
Bachelors Degree in Electronics Engineering, Mechanical Engineering, Aerospace Engineering, or another relevant technical field.
At least 3 years of experience working in a Pre-Sales / Solutions Engineering role supporting business development.
Proven experience supporting technical solution design, proposal development, or technical sales for ground station systems, TT&C, or aerospace communication systems.
Background in RF system fundamentals, antenna systems, mechanical structures, and electronics.
Experience preparing system architectures, block diagrams, and technical solution documents.
Excellent interpersonal, presentation, and high technical writing skills in English and Hebrew.
Strategic thinker with ability to analyze requirements and develop discriminating solutions.
Willingness and ability to travel internationally for customer meetings, demonstrations, and events.

Desirable Qualifications:
Demonstrated experience in preparing and leading large-scale proposals for aerospace, defense, or satellite ground systems.
Minimum of three years as a Systems Engineer or Integration Engineer working with complex, multidisciplinary systems that encompass RF, electronics, mechanical, and software components.
Prior hands-on involvement in system testing, such as FAT, SAT, or ATP.
Knowledgeable about ground station link budgets, various tracking modes (step track, monopulse, etc.), as well as satellite communication and tracking technologies.
Experience with Earth Observation, Remote Sensing, or New Space initiatives.
Passionate about space exploration.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8748141
סגור
שירות זה פתוח ללקוחות VIP בלבד