דרושים » ייצור ותעשייה » Structural Engineering Analyst

We are looking for a talented Mechanical Design Engineer to join our dexterous hands development team. You will work alongside senior engineers who lead this field and bring extensive experience in miniature mechanisms.
This is a highly hands-on position in a fast-moving, multidisciplinary environment. You will take mechanisms from early concepts through detailed design, prototyping, testing, iteration, and preparation for production.
Responsibilities:
Design compact, high-performance mechanisms for dexterous robotic hands, fingers, and wrists.
Develop joints, transmissions, actuation systems, tendon or cable-driven mechanisms, and sensor-integrated components.
Perform kinematic, force, tolerance, and structural analyses.
Create detailed 3D CAD models, assemblies, production drawings, and bills of materials.
Build and assemble prototypes and conduct hands-on mechanical testing.
Design test fixtures and define practical validation procedures.
Investigate failures, identify root causes, and rapidly implement design improvements.
Select materials, bearings, fasteners, springs, cables, actuators, sensors, and manufacturing processes.
Work closely with controls, electronics, software, industrial design, and manufacturing engineers.
Collaborate with suppliers and support the transition from prototypes to repeatable production.

We are looking for a mid-to-senior Mechanical Engineer who takes bold concepts and engineers them into precision-manufactured reality. The role demands mastery of opto-mechanical design, rigorous FEM-based analysis, and deep collaboration with Manufacturing and Process Engineering, pioneering mechanical solutions for next-generation consumer devices from first principles to mass production.

The Mechanical Engineer works closely with Hardware Engineering, Product Design, Electrical Engineering, and Process Engineering teams, leading design and analysis efforts across the product development cycle.

Responsibilities
Pioneering opto-mechanical designs for precision assemblies, translating ambitious concepts and optical requirements into manufacturable solutions with exacting tolerances.
Owning mechanical integration of optical components, sensors, and PCBs - encompassing fit, alignment, tolerance stack-up, and assembly sequence definition.
Partnering with Manufacturing and Process Engineering from early design stages to ensure concepts are grounded in process capability and scalable to mass production.
Leading FEM analyses across thermal, static, dynamic, and drop-test scenarios for small form factor consumer devices, ensuring structural integrity and durability under real-world conditions.
Conducting failure analysis (FA) to identify root causes and drive corrective design actions to resolution.
Driving end-to-end prototype builds, R&D setups, jigs, and fixtures in close collaboration with Process Engineering.
Defining and executing design verification and validation plans, and translating results into concrete design improvements.
Defining GD&T and collaborating with manufacturing partners to validate producibility, dimensional compliance, and process yield.
Leading design reviews, identifying risks early, and driving cross-functional resolution of complex mechanical challenges.

a leading defense-tech startup, developing advanced electro-optical systems for real-world defense applications, is looking for a senior mechanical design engineer to join the r&d team and take a hands-on role in designing and developing mechanical systems and assemblies, from concept through production. the role offers significant ownership and involvement in solving complex engineering challenges.
responsibilities:
lead end-to-end mechanical development, from concept and design through production and field support.
design, prototype, TEST, and validate mechanical systems and components.
design cameras, lenses, enclosures, and electromechanical assemblies.
optimize designs for performance, reliability, and manufacturability.
create and maintain technical drawings, specifications, and TEST procedures.
own multiple projects and independently drive solutions to complex mechanical challenges.
collaborate with multidisciplinary teams to deliver integrated, production-ready solutions.
work with manufacturing technologies including cnc, sheet metal, molding, and 3d printing.
design mechanisms and enclosures for harsh environmental conditions.
support vibration and shock testing and qualification.

Join us as a Junior system Engineer in our R&D department to design and develop advanced systems for our aerospace projects. We are seeking a hands-on Junior system Engineer to take overall technical ownership of an existing multidisciplinary system -from production and integration through ongoing product and customer support. you will lead engineering efforts to solve complex system -level issues manage engineering change orders (ECOs) and provide Technical Support to production lines and clients You will work cross-functionally with Hardware, Firmware, Software, Mechanical, QA, and Production teams. Key Responsibilities Support system integration, testing, and troubleshooting activities in the laboratory and production environment. Perform hands-on debugging and fault isolation across hardware, software, FPGA, and Embedded subsystems. Operate TEST equipment, including oscilloscopes, digital multimeters, power supplies, and Automated TEST Equipment (ATE). Own technical problems end to end: identify the issue, isolate the root cause, and drive a practical solution through to implementation and verification. Support production activities, investigate technical issues, and assist in resolving mechanical electrical and SW issues. Maintain and update technical documentation, including TEST procedures, TEST reports, interface documentation, ECO, maintenance, and work instructions. Support customer interface by drafting responses to technical queries and failure reports and joining technical reviews.
Location: Herzliya, relocating to Raanana-Kfar Saba Junction in ~9 months

We are seeking a Senior Systems Engineer for our System of Systems project, focused on developing innovative aerospace solutions. You will lead systems integration efforts and ensure seamless functionality across various systems.
Responsibilities:
Own the systems engineering of a complex System of Systems (SoS), maintaining the overall system-level view across multiple interconnected systems and subsystems.
Translate operational and customer needs into system architecture, clear and verifiable requirements, and system and interface specifications.
Define and manage interfaces and cross-system dependencies across radar, electro-optic, software and hardware teams.
Lead system integration, verification and validation activities, including system-level troubleshooting and resolution of technical issues, and participate in field integration and test campaigns (ground and live-fire test events).
Identify system risks, interface gaps and integration challenges early, and drive technical solutions with the relevant engineering teams.
Participate in and contribute to system design reviews (SRR, PDR, CDR) and technical trade-off studies from a System of Systems perspective.
Serve as the technical focal point for system-level and cross-system topics, working closely with multidisciplinary engineering teams and reporting key progress, risks and decisions to the Head of Systems Engineering.

We're looking for an Engineering Program Manager (EPM) to lead a multidisciplinary program that takes a new sensing technology from research to product. The program covers HW, sensing, mechanical engineering, FW, SW, and ML. You will turn early research into a roadmap that can ship, and keep the teams aligned around one goal: a new kind of interaction experience for our users.
This is not a typical execution role. You'll work closely with researchers and engineers while driving and supporting execution. You'll know when to give exploration room and when to push toward productization. You'll be fluent in both scientific uncertainty and product discipline.

You'll be the central point of coordination for a program that moves through research, feasibility, prototyping, and product development at the same time. Working with world-class scientists, engineers, and ML experts in Israel and the US, you'll define the plan, make technical risk visible, and help leadership make clear decisions when the path forward isn't obvious. Along with engineering leadership, you'll be the face of the program.

Responsibilities
Build and own the program roadmap, from research milestones and feasibility checkpoints through prototype builds and productization.
Turn open-ended research questions into structured plans with clear hypotheses, success criteria, and decision gates.
Summarize research results into clear, data-driven findings and recommendations for executive audiences.
Keep a collaborative, transparent culture that respects research rigor and product urgency equally.
Align cross-functional teams across HW, physics, optics, mechanical, FW, ML/algorithms, data collection, and user experience.
Manage dependencies between ML workstreams, data collection, and HW development so learning cycles stay fast.
Run prototype and development builds with engineering teams, operations partners, and suppliers.
Spot technical and organizational risks early, and present them as strategic choices with mitigation paths.
Keep a collaborative, transparent culture that respects research rigor and product urgency equally.
Improve program methods to fit the needs of a research-to-product program.