דרושים » הנדסה » Electromechanical Quality Controller

abra is hiring a Quality Inspector. The position involves performing in-process inspections of integrated hardware/software units, including visual and electrical inspections of complex systems (SRU/ LRU) and RF transmitters. Responsibilities also include reviewing technical documentation (ESS, HASS, ATR), managing non-conformance reports (NCR), handling deviations, and conducting root cause analysis. full-time position (Sunday–Thursday) based in Holon.

DRS RADA is a global pioneer of RADAR systems for active military protection, counter-drone applications, critical infrastructure protection, and border surveillance. We are looking for a talented Technical Manager to join our team. Core Mission: Ensure rigorous quality assurance throughout the development lifecycle of hardware-based radar systems, driving toward zero defects in design, testing, and pre-production phases. Lead quality planning, risk mitigation, and compliance for multiple radar development projects running in parallel. Key Responsibilities:
* Develop and execute quality assurance plans tailored to hardware development (radar systems), focusing on materials, components, assembly, integration, and validation.
* Define hardware-specific KPIs/KGIs (e.g., First Pass Yield, Test Coverage, Defect Density in prototyping, Non-Conformance Rates)
* Act as quality authority in hardware-focused design reviews:
* SRR (System Requirements Review) – Ensure requirements are testable and meet standards.
* PDR (Preliminary Design Review) – Assess design maturity, component selection, and tolerancing.
* CDR (Critical Design Review) – Verify design readiness for prototyping, focusing on manufacturability, reliability, and safety.
* TRR (Test Readiness Review) – Validate test setups, instrumentation, and acceptance criteria.
* PRR (Production Readiness Review) – Ensure design is transition-ready with robust quality controls.
* Conduct hardware-focused FMEA on RF modules, power systems, structural elements, thermal management, and integration interfaces.
* Implement preventive/corrective actions to address identified failure modes early in development.
* Oversee design verification testing (DVT) and reliability testing (e.g., HALT/HASS, thermal cycling, vibration, EMI/EMC).
* Approve test plans, procedures, and reports for hardware performance and compliance.
* Chair Change Control Board (CCB) meetings for hardware changes (BOM revisions, component substitutions, drawing updates).
* Maintain traceability of requirements, designs, tests, and revisions.
* Ensure adherence to AS9100 and MIL STD as 810,882,461
* Support safety certification processes (functional safety for hardware subsystems) according to MIL- STD-882
* Lead cross-functional Root Cause Analysis (e.g., 8D, 5Why) for hardware non-conformances.
* Drive systematic corrections into design and development processes to prevent recurrence.
* Collaborate with suppliers on critical components (e.g., PCBA, antennas, enclosures) to ensure design intent is met and quality is built in.

Required Warehouse Quality Inspector (South)
Join our dynamic warehouse team as an Outgoing Quality Inspector, where you will play a critical role in ensuring product quality and compliance before items leave our facility.
This position is ideal for detail-oriented professionals who take pride in accuracy and maintaining high standards.
You will be part of a fast-paced environment that values precision, teamwork, and continuous improvement.
Key Responsibilities
Perform final inspections on products and shipments to verify compliance with quality standards and customer specifications.
Check labeling, packaging, and documentation for accuracy before dispatch.
Identify and report any defects, discrepancies, or non-conformities promptly.
Collaborate with warehouse staff and quality teams to resolve issues and maintain workflow efficiency.
Maintain accurate inspection records and ensure proper documentation for audits.
Follow safety protocols and contribute to a clean, organized work environment.
Overseeing the performance of all other global warehouses.
Support continuous improvement initiatives by providing feedback on recurring issues.

Are you ready to power the future? we're a global leader in smart energy technology, with over 3,000 employees, offices in 34 countries, and millions of installations worldwide. Our innovative solutions include solar inverters, battery Storage, backup systems, EV charging, and AI-based energy management. We're committed to making clean, green energy the primary power source for homes, businesses, and beyond. With the growing demand for electricity, the need for smart, clean energy sources is constantly rising. we offers amazing opportunities to develop your skills in a multidisciplinary environment, covering everything from research and development to production and customer supply. Work with talented colleagues, tackle exciting challenges, and help create a sustainable future in an industry that's always evolving and innovating. Join us and be part of a company that values creativity, agility, and impactful work is seeking a Quality Director for Sella1 production site located at Tziporit industrial zone Nof Hagalil. This is a high-level executive position with broad responsibility for product quality, and adherence to strict professional and regulatory standards. The role is suitable for a candidate with significant management experience, capable of leading complex domains, implementing processes, and establishing long-term quality infrastructures. Key Responsibilities: Overall Leadership: Full responsibility for Production site Quality, Failure analysis investigation with solid relationship with production site and HQ technical and Q&R owners.. Strategy & Execution: Formulating and implementing Quality strategies aligned with operational and business goals. Compliance & Regulation: Leading quality systems and standards (ISO), ensuring compliance with regulatory requirements, and managing internal and external audits. Continuous Improvement: Leading and managing corrective actions and process improvements plans and processes. Performance Management: Setting goals, KPIs, and monitoring the performance of productions and Quality units. Supply Chain Quality: Overseeing supplier quality control processes. NPI (New Product Introduction): Leading quality control in the onboarding of new products. Representation: Representing the production site before regulators, customers, audit bodies, and business partners. Mentorship: Professional leadership and coaching of Quality and production site teams.
Country:
Israel
City:
Ziporit

Do you want to help us build the DNA of tech.?
we are currently seeking applicants for a QC Operator. In this position, you will be responsible for ensuring that products or services meet the established quality standards. You will inspect, test, or sample materials, products, or processes for defects or deviations from specifications.
Job Location:
Beer Sheva is the capital of the Negev, located in Southern Israel.
What you will be doing:
To perform inspections on products throughout the manufacturing process to ensure they meet established quality standards.
To document inspection data and identify any trends or issues that need to be addressed.
To work with production teams to identify and address any quality issues as they arise.

We are seeking a highly skilled and motivated Electrical Validation (EV) Engineer and System Production/Testing/ATE Engineer to join our team. This position is crucial in supporting the design EV, development, and implementation of Automated Test Equipment (ATE) and production test systems.
The Electrical Validation Manager leads the electrical validation function across our company hardware platforms. This role owns validation strategy, methodology, lab infrastructure, and execution across all high-speed and control interfaces. The manager ensures robust electrical performance from early prototypes through production release and drives cross-functional alignment between design, SI, firmware, and manufacturing.
The role involves close collaboration with R&D, Quality, DevOps, and Contract Manufacturing (CM) teams to ensure the delivery of high-quality, reliable products.
Key Responsibilities
Define the electrical validation strategy for our company hardware platforms.
Own validation methodology for: High-speed Ethernet (100M-1600G), PCIe Gen1 to Gen5+, SerDes architectures (NRZ/PAM4), Control and management buses (I2C, SPI, RS-232, MDIO, etc.)
Establish structured validation plans aligned with hardware release milestones.
Build and manage a high-performance validation team.
Define lab architecture including: Equipment selection (oscilloscopes, BERTs, analyzers), Compliance platforms, Automation frameworks, Signal integrity validation environments
Drive early engagement with board design and SI teams to ensure design-for-validation.
Oversee: Compliance (IEEE, PCI-SIG, OIF), Interoperability testing, Stress and margin testing
Lead root cause analysis of electrical failures and systemic issues.
Support NPI, manufacturing bring-up, and yield improvement.
Develop automation and scalable validation methodologies.
Define validation documentation standards and sign-off criteria.
Collaborate with system architecture and software teams to ensure HW-SW integration robustness.
Manage external labs and certification processes where required.
Drive continuous improvement of validation coverage and efficiency.
Lead the full ATE development lifecycle from requirements definition to execution in production, including GUI design and Python scripting.
Develop and maintain boundary scan applications using JTAG Technologies.
Define and maintain test fixtures, including JIGs/Bed-of-Nails, etc. in collaboration with mechanical vendors.
Implement full test traceability systems for production yield and stability monitoring.
Collaborate with R&D and Quality teams to drive product quality and reliability improvements.
Provide onsite support at CM sites, including station setup, installation, training, maintenance, and debugging.
Perform in-depth failure analysis and troubleshooting at the system and component level.
Utilize and maintain a range of test equipment, including:
Work with various communication protocols: TCP/IP, Telnet, SSH, HTTP, SNMP, SFTP, SCP, FTP, RS232, GPIB, I2C, NI-VISA.
Support testing of embedded systems running on Linux platforms.

our company Mobility Rail Division has an immediate opening for an Electrical Architect position at their Sacramento, California Facility. The candidate will have responsibility for all aspects of the Electrical Design of his/her assigned Light Rail project(s) and will work among others on integrating complex designs involving high voltage applications, safety systems & modern communication and video surveillance systems.
We are looking for professionals with the drive to work in the high paced rail industry to build new and innovative designs for our future vehicles.
In this role as a member of the Electrical Architecture group you will guide the development of electrical schematics and harnessing by interpreting requirements from the customer contract or industry standards into concepts for the designers and design review documentation for the customers. This may apply to a variety of vehicle designs and requires good understanding of electrical fundamentals and creativity to come up with entirely new solutions. Must be detail oriented and take ownership of projects to see them through the production and testing phase.
What your day-to-day will look like:
Lead and present solutions for electrical integration of Light Rail projects, ensuring alignment with schedules and industry standards.
Represent the Electrical Integration group in customer meetings and coordination calls.
Collaborate with mechanical architects, technical managers, and system architects to define vehicle designs for projects.
Guide the development and review of electrical circuit diagrams and supplier documentation.
Select electrical components using vendor catalogs, perform calculations, and specify parameters as needed.
Plan, schedule, and track design work packages, providing updates to management on progress.
Drive continuous improvement of Light Rail platforms in coordination with platform managers and stakeholders.
Ensure compliance with safety, EMI, and component sizing requirements, work mainly on-site with some remote flexibility.

we are seeking a highly skilled systems integration and Validation engineer to join our dynamic team in the automotive industry. the ideal candidate will have a strong background in system development, integration, and testing, with at least 5 years of relevant experience. as an integration engineer, you will play a key role in integrating and validating a complex automotive system, ensuring they meet the highest standards of quality, performance, and reliability. what will your job look like:
system integration: collaborate with cross-functional teams to integrate various subsystems and components into a cohesive automotive system, ensuring compatibility and functionality.
risk management: identify potential risks and issues related to system design and implementation, and develop mitigation strategies to ensure project success.
documentation and reporting: create comprehensive documentation, including system designs, TEST reports, and technical specifications. provide regular progress updates and reports to management and stakeholders.
testing and validation: develop and execute TEST plans and procedures to validate system performance, reliability, and safety according to industry standards and regulations.

nvidia's new product introduction (npi) team is growing, and we're looking for a highly motivated and diligent engineering vendor manager to join us. in this critical role, you'll be responsible for the engineering management of our most strategic and technologically advanced suppliers, ensuring the highest quality and reliability of components for our groundbreaking products.
 
nvidia networking division is a leading supplier of innovative end-to-end nvlink, infiniband and ethernet connectivity solutions and services for servers and Storage. we offer market-leading solutions that include adapter cards, switches, cables, and software to support networking technologies. our products optimize data center performance, using nvidias ai solution and deliver industry-leading bandwidth and scalability. in addition, we serve a wide range of sectors, including high-performance computing, enterprise, data centers, cloud computing, Big Data, and web 2.0.
what you'll be doing:
lead engineering engagement with strategic and critical suppliers for new product introductions (npi) and ongoing production, identify potential risks, critical parameters, and areas for optimization
define and implement clear monitoring and documentation requirements for key process steps to ensure consistency and quality
establish comprehensive quality criteria and outgoing quality control (oqc) procedures at suppliers prior to shipment
monitor and analyze supplier yield data, production metrics, and quality performance to identify trends and drive corrective actions
collaborate closely with internal nvidia engineering teams (design, product, reliability, quality) to ensure supplier capabilities align with product requirements
drive continuous improvement initiatives at suppliers to enhance process control, yield, and overall product quality
conduct supplier technical audits and provide mentorship on standard processes in manufacturing and quality control
act as the primary technical interface between nvidia and strategic suppliers, resolving complex engineering challenges

The Head of QA will establish and lead the companys quality and compliance function from the ground up. This role will design, implement, and maintain a scalable Quality Management System (QMS) aligned with ISO 9001, while preparing the organization for future cross-industry and regulated-environment requirements.
The role includes end-to-end ownership of quality across hardware, software, and fabrication/production processes, with a strong emphasis on traceability, structured documentation, audits, supplier quality, and continuous improvement.
In the initial phase, this is a highly hands-on role, requiring direct involvement in testing, validation, process verification, and the identification and reporting of product and process issues, while building the quality infrastructure needed to support scale.
Full physical presence on site is required due to the hands-on nature of the role and the close interaction with development, fabrication, suppliers, and audits.
What youll do
Build and lead a scalable QMS aligned with ISO 9001, with a path toward GMP and regulated environments
Own quality across hardware, software, and fabrication/production processes
Build end-to-end traceability across the product lifecycle, from requirements to release
Create and maintain product and development documentation, including technical files, validation records, risk management, and change control
Set up document control processes, including versioning, approvals, and audit trails
Lead testing, validation, and process verification, with hands-on involvement in the early stages
Drive root cause analysis, corrective actions, and continuous improvement
Define and implement software quality processes, including development governance, testing, and change management
Manage supplier quality and audits, and lead external certification processes (ISO and future regulatory requirements)
Work closely with engineering to solve issues quickly and create strong feedback loops between testing and development
Help scale the function over time, moving from hands-on execution to broader system ownership and team growth.